Experimental and Computational Analysis of Para-Hydroxy Methylcinnamate following Photoexcitation

Para-hydroxy methylcinnamate is part of the cinnamate family of molecules. Experimental and computational studies have suggested conflicting non-radiative decay routes after photoexcitation to its S₁(ππ*) state. One non-radiative decay route involves intersystem crossing mediated by an optically dark singlet state, whilst the other involves direct intersystem crossing to a triplet state. Furthermore, irrespective of the decay mechanism, the lifetime of the initially populated S₁(ππ*) state is yet to be accurately measured. In this study, we use time-resolved ion-yield and photoelectron spectroscopies to precisely determine the S₁(ππ*) lifetime for the s-cis conformer of para-hydroxy methylcinnamate, combined with time-dependent density functional theory to determine the major non-radiative decay route. We find the S₁(ππ*) state lifetime of s-cis para-hydroxy methylcinnamate to be ∼2.5 picoseconds, and the major non-radiative decay route to follow the [¹ππ*→¹nπ*→³ππ*→S₀] pathway. These results also concur with previous photodynamical studies on structurally similar molecules, such as para-coumaric acid and methylcinnamate.     

Bioactive Abietane-Type Diterpenoid Glycosides from Leaves of Clerodendrum infortunatum (Lamiaceae)

In this study, two previously undescribed diterpenoids, (5R,10S,16R)-11,16,19-trihydroxy-12-O-β-d-glucopyranosyl-(1→2)-β-d-glucopyranosyl-17(15→16),18(4→3)-diabeo-3,8,11,13-abietatetraene-7-one (1) and (5R,10S,16R)-11,16-dihydroxy-12-O-β-d-glucopyranosyl-(1→2)-β-d-glucopyranosyl-17(15→16),18(4→3)-diabeo-4-carboxy-3,8,11,13-abietatetraene-7-one (2), and one known compound, the C₁₃-nor-isoprenoid glycoside byzantionoside B (3), were isolated from the leaves of Clerodendrum infortunatum L. (Lamiaceae). Structures were established based on spectroscopic and spectrometric data and by comparison with literature data. The three terpenoids, along with five phenylpropanoids: 6′-O-caffeoyl-12-glucopyranosyloxyjasmonic acid (4), jionoside C (5), jionoside D (6), brachynoside (7), and incanoside C (8), previously isolated from the same source, were tested for their in vitro antidiabetic (α-amylase and α-glucosidase), anticancer (Hs578T and MDA-MB-231), and anticholinesterase activities. In an in vitro test against carbohydrate digestion enzymes, compound 6 showed the most potent effect against mammalian α-amylase (IC₅₀ 3.4 ± 0.2 μM) compared to the reference standard acarbose (IC₅₀ 5.9 ± 0.1 μM). As yeast α-glucosidase inhibitors, compounds 1, 2, 5, and 6 displayed moderate inhibitory activities, ranging from 24.6 to 96.0 μM, compared to acarbose (IC₅₀ 665 ± 42 μM). All of the tested compounds demonstrated negligible anticholinesterase effects. In an anticancer test, compounds 3 and 5 exhibited moderate antiproliferative properties with IC₅₀ of 94.7 ± 1.3 and 85.3 ± 2.4 μM, respectively, against Hs578T cell, while the rest of the compounds did not show significant activity (IC₅₀ > 100 μM).     

Poly(o-methoxyaniline) Chain Degradation Based on a Heat Treatment (HT) Process: Combined Experimental and Theoretical Evaluation

Poly(o-methoxyaniline) emeraldine-salt form (ES-POMA) was chemically synthesized using hydrochloric acid and subjected to a heat treatment (HT) process for 1 h at 100 °C (TT₁₀₀) and 200 °C (TT₂₀₀). The HT process promoted a progressive decrease in crystallinity. The Le Bail method revealed a decomposition from tetrameric to trimeric-folded chains after the HT process. The unheated POMA-ES presented a globular vesicular morphology with varied micrometric sizes. The heat treatment promoted a reduction in these globular structures, increasing the non-crystalline phase. The boundary length (S) and connectivity/Euler feature (χ) parameters were calculated from the SEM images, revealing that ES-POMA presented a wide distribution of heights. The TT₁₀₀ and TT₂₀₀ presented a narrow boundary distribution, suggesting smoother surfaces with smaller height variations. The UV-VIS analysis revealed that the transition at 343 nm (nonlocal π → π*) was more intense in the TT₂₀₀ due to the electronic delocalization, which resulted from the reduced polymer chain caused by the HT process. In addition to the loss of conjugation, counter ion withdrawal reduced the ion-chain interaction, decreasing the local electron density. This result shows the influence of the chlorine counter ions on the peaks position related to the HOMO → LUMO transition, since the π → polaron transition occurs due to the creation of the energy states due to the presence of counter ions. Finally, the electrical conductivity decreased after the HT process from 1.4 × 10⁻⁴ S.cm⁻¹ to 2.4 × 10⁻⁶ S.cm⁻¹ as result of the polymer deprotonation/degradation. Thus, this paper proposed a systematic evaluation of the POMA molecular structure and crystallite size and shape after heat treatment.     

Rate Coefficients of the Reactions of Fluorine Atoms with H2S and SH over the Temperature Range 220–960 K

Reaction F + H₂S→SH + HF (1) is an effective source of SH radicals and an important intermediate in atmospheric and combustion chemistry. We employed a discharge-flow, modulated molecular beam mass spectrometry technique to determine the rate coefficient of this reaction and that of the secondary one, F + SH→S + HF (2), at a total pressure of 2 Torr and in a wide temperature range 220–960 K. The rate coefficient of Reaction (1) was determined directly by monitoring consumption of F atoms under pseudo-first-order conditions in an excess of H₂S. The rate coefficient of Reaction (2) was determined via monitoring the maximum concentration of the product of Reaction (1), SH radical, as a function of [H₂S]. Both rate coefficients were found to be virtually independent of temperature in the entire temperature range of the study: k₁ = (1.86 ± 0.28) × 10⁻¹⁰ and k₂ = (2.0 ± 0.40) × 10⁻¹⁰ cm³ molecule⁻¹ s⁻¹. The kinetic data from the present study are compared with previous room temperature measurements.     

Toward the assignment of the manganese oxidation pattern in the water-oxidizing complex of photosystem II: a time-dependent DFT study of XANES energies

Density functional theory (DFT) and time‐dependent DFT (TDDFT) calculations are reported on three sets of isomeric models of the {Mn₄/Ca} water‐oxidizing complex of photosystem II (PS II), which share the general formula [CaMn₄O₄(N₂C₃H₄)(RCOO)₆]^q?(H₂O)_n (R=H, CH₃; q=?1, 0, +1, +2; n=3, 4, 5, 6, 7). Comparison with the full range of available data on Mn K‐edge X‐ray absorption energy values determined for the photosystem allows us to validate the structures that correspond to the particular S states and to determine their Mn oxidation patterns. By using a new TDDFT procedure, it is shown that variations in the absolute K‐edge energy values for a particular S state, reported by different research groups, can be quantitatively explained by different geometries adopted by the Mn cluster, which demonstrates flexibility in the position of the fourth ‘dangling’ Mn atom in relation to a cubane structure created by the Ca atom and the three other Mn atoms. Computational results show that each step of the S cycle occurs by removal of one electron directly from the Mn cluster. This Mn‐centered oxidation still agrees with the small difference observed experimentally between the K‐edge energy values of the S₂ and S₃ states of the photosystem, thus resolving a controversy as to whether this represents ligand‐centered or metal‐centered oxidation. The overall oxidation state of Mn atoms in the tetramanganese cluster during functional turnover changes from 2.75 for S₀, 3.00 for S₁, and 3.25 for S₂ up to 3.50 for the S₃ state, which is systematically 0.50 lower than the previously proposed oxidation states of the cluster. The calculations give insight into why these earlier, purely empirical, assignments of the Mn oxidation levels in PS II could be in error.     

Metal oxidation states in biological water splitting

A central question in biological water splitting concerns the oxidation states of the manganese ions that comprise the oxygen-evolving complex of photosystem II. Understanding the nature and order of oxidation events that occur during the catalytic cycle of five S_i states (i = 0–4) is of fundamental importance both for the natural system and for artificial water oxidation catalysts. Despite the widespread adoption of the so-called “high-valent scheme”—where, for example, the Mn oxidation states in the S₂ state are assigned as III, IV, IV, IV—the competing “low-valent scheme” that differs by a total of two metal unpaired electrons (i.e. III, III, III, IV in the S₂ state) is favored by several recent studies for the biological catalyst. The question of the correct oxidation state assignment is addressed here by a detailed computational comparison of the two schemes using a common structural platform and theoretical approach. Models based on crystallographic constraints were constructed for all conceivable oxidation state assignments in the four (semi)stable S states of the oxygen evolving complex, sampling various protonation levels and patterns to ensure comprehensive coverage. The models are evaluated with respect to their geometric, energetic, electronic, and spectroscopic properties against available experimental EXAFS, XFEL-XRD, EPR, ENDOR and Mn K pre-edge XANES data. New 2.5 K ⁵⁵Mn ENDOR data of the S₂ state are also reported. Our results conclusively show that the entire S state phenomenology can only be accommodated within the high-valent scheme by adopting a single motif and protonation pattern that progresses smoothly from S₀ (III, III, III, IV) to S₃ (IV, IV, IV, IV), satisfying all experimental constraints and reproducing all observables. By contrast, it was impossible to construct a consistent cycle based on the low-valent scheme for all S states. Instead, the low-valent models developed here may provide new insight into the over-reduced S states and the states involved in the assembly of the catalytically active water oxidizing cluster.     

Study of Integer Spin S = 1 in the Polar Magnet β-Ni(IO3)2

Polar magnetic materials exhibiting appreciable asymmetric exchange interactions can potentially host new topological states of matter such as vortex-like spin textures; however, realizations have been mostly limited to half-integer spins due to rare numbers of integer spin systems with broken spatial inversion lattice symmetries. Here, we studied the structure and magnetic properties of the S = 1 integer spin polar magnet β-Ni(IO₃)₂ (Ni²⁺, d⁸, ³F). We synthesized single crystals and bulk polycrystalline samples of β-Ni(IO₃)₂ by combining low-temperature chemistry techniques and thermal analysis and characterized its crystal structure and physical properties. Single crystal X-ray and powder X-ray diffraction measurements demonstrated that β-Ni(IO₃)₂ crystallizes in the noncentrosymmetric polar monoclinic structure with space group P2₁. The combination of the macroscopic electric polarization driven by the coalignment of the (IO₃)⁻ trigonal pyramids along the b axis and the S = 1 state of the Ni²⁺ cation was chosen to investigate integer spin and lattice dynamics in magnetism. The effective magnetic moment of Ni²⁺ was extracted from magnetization measurements to be 3.2(1) µ_B, confirming the S = 1 integer spin state of Ni²⁺ with some orbital contribution. β-Ni(IO₃)₂ undergoes a magnetic ordering at T = 3 K at a low magnetic field, μ₀H = 0.1 T; the phase transition, nevertheless, is suppressed at a higher field, μ₀H = 3 T. An anomaly resembling a phase transition is observed at T ≈ 2.7 K in the C_p/T vs. T plot, which is the approximate temperature of the magnetic phase transition of the material, indicating that the transition is magnetically driven. This work offers a useful route for exploring integer spin noncentrosymmetric materials, broadening the phase space of polar magnet candidates, which can harbor new topological spin physics.     

A Gas‐Phase CanMn4−nO4+ Cluster Model for the Oxygen‐Evolving Complex of Photosystem II

One of the fundamental processes in nature, the oxidation of water, is catalyzed by a small CaMn₃O₄?MnO cluster located in photosystem II (PS II). Now, the first successful preparation of a series of isolated ligand‐free tetrameric Ca_nMn_4?nO₄⁺ (n=0–4) cluster ions is reported, which are employed as structural models for the catalytically active site of PS II. Gas‐phase reactivity experiments with D₂O and H₂¹⁸O in an ion trap reveal the facile deprotonation of multiple water molecules via hydroxylation of the cluster oxo bridges for all investigated clusters. However, only the mono‐calcium cluster CaMn₃O₄⁺ is observed to oxidize water via elimination of hydrogen peroxide. First‐principles density functional theory (DFT) calculations elucidate mechanistic details of the deprotonation and oxidation reactions mediated by CaMn₃O₄⁺ as well as the role of calcium.     

Ferro- and Antiferromagnetic Interactions in Oxalato-Centered Inverse Hexanuclear and Chain Copper(II) Complexes with Pyrazole Derivatives

Two novel copper(II) complexes of formulas {[Cu(4-Hmpz)₄][Cu(4-Hmpz)₂(µ₃-ox-κ²O¹,O²:κO^2′:κO^1′)(ClO₄)₂]}_n (1) and {[Cu(3,4,5-Htmpz)₄]₂[Cu(3,4,5-Htmpz)₂(µ₃-ox-κ²O¹,O²:κO^2′:κO^1′)(H₂O)(ClO₄)]₂[Cu₂(3,4,5-Htmpz)₄(µ-ox-κ²O¹,O²:κ²O^2′,O^1′)]}(ClO₄)₄·6H₂O (2) have been obtained by using 4-methyl-1H-pyrazole (4-Hmpz) and 3,4,5-trimethyl-1H-pyrazole (3,4,5-Htmpz) as terminal ligands and oxalate (ox) as the polyatomic inverse coordination center. The crystal structure of 1 consists of perchlorate counteranions and cationic copper(II) chains with alternating bis(pyrazole)(µ₃-κ²O¹,O²:κO^2′:κO^1′-oxalato)copper(II) and tetrakis(pyrazole)copper(II) fragments. The crystal structure of 2 is made up of perchlorate counteranions and cationic centrosymmetric hexanuclear complexes where an inner tetrakis(pyrazole)(µ-κ²O¹,O²:κ²O^2′,O^1′-oxalato)dicopper(II) entity and two outer mononuclear tetrakis(pyrazole)copper(II) units are linked through two mononuclear aquabis(pyrazole)(µ₃-κ²O¹,O²:κO^2′:κO^1′-oxalato)copper(II) units. The magnetic properties of 1 and 2 were investigated in the temperature range 2.0–300 K. Very weak intrachain antiferromagnetic interactions between the copper(II) ions through the µ₃-ox-κ²O¹,O²:κO^2′:κO^1′ center occur in 1 [J = −0.42(1) cm⁻¹, the spin Hamiltonian being defined as H = −J∑S_1,i · S_2,i+1], whereas very weak intramolecular ferromagnetic [J = +0.28(2) cm⁻¹] and strong antiferromagnetic [J’ = −348(2) cm⁻¹] couplings coexist in 2 which are mediated by the µ₃-ox-κ²O¹,O²:κO^2′:κO^1′ and µ-ox-κ²O¹,O²:κ²O^2′,O^1′ centers, respectively. The variation in the nature and magnitude of the magnetic coupling for this pair of oxalato-centered inverse copper(II) complexes is discussed in the light of their different structural features, and a comparison with related oxalato-centered inverse copper(II)-pyrazole systems from the literature is carried out.     

Development and Validation of High-Throughput Bioanalytical Liquid Chromatography-Tandem Mass Spectrometry (LC-MS/MS) Method for the Quantification of Newly Synthesized Antitumor Carbonic Anhydrase Inhibitors in Human Plasma

In the present study, a sensitive and fully validated bioanalytical high-performance liquid chromatography-tandem mass spectrometry (LC-MS/MS) method has been developed for the quantitative determination of three newly synthesized carbonic anhydrases inhibitors (CAIs) with potential antitumor activity in human plasma. The analytes and the internal standard (IS) were extracted using 1.5 mL acetonitrile from only 450 µL aliquots of human plasma to achieve the desired protein precipitation. Chromatographic separations were achieved on Phenomenex Kinetex^® C₁₈ column (100 × 4.6 mm, 2.6 µm) using a binary gradient elution mode with a run time of less than 6 min. The mobile phase consisted of solvent (A): 0.1% formic acid in 50% methanol and solvent B: 0.1% formic acid in acetonitrile (30:70, v/v), pumped at a flow rate of 0.8 mL/min. Detection was employed using triple quadrupole tandem mass spectrometer (API 3500) equipped with an electrospray ionization (ESI) source in the positive ion mode. Multiple reaction monitoring (MRM) mode was selected for quantitation through monitoring the precursor-to-parent ion transition at m/z 291.9 → 173.0, m/z 396.9 → 225.1, m/z 388.9 → 217.0, and m/z 146.9 → 91.0 for AW-9a, WES-1, WES-2, and Coumarin (IS), respectively. Linearity was computed using the weighted least-squares linear regression method (1/x²) over a concentration range of 1–1000, 2.5–800, and 5–500 ng/mL for AW-9a, WES-1, and WES-2; respectively. The bioanalytical LC-MS/MS method was fully validated as per U.S. Food and Drug Administration (FDA) guidelines with all respect to linearity, accuracy, precision, carry-over, selectivity, dilution integrity, and stability. The proposed LC-MS/MS method was applied successfully for the determination of all investigated drugs in spiked human plasma with no significant matrix effect, which is a crucial cornerstone in further therapeutic drug monitoring of newly developed therapeutic agents.     

Can acyclic conformational control be achieved via a sulfur–fluorine gauche effect?

The gauche conformation of the 1,2-difluoroethane motif is known to involve stabilising hyperconjugative interactions between donor (bonding, σ_C–H) and acceptor (antibonding, σ*C–F) orbitals. This model rationalises the generic conformational preference of F–C_β–C_α–X systems (φ_FCCX ≈ 60°), where X is an electron deficient substituent containing a Period 2 atom. Little is known about the corresponding Period 3 systems, such as sulfur and phosphorus, where multiple oxidation states are possible. Conformational analyses of β-fluorosulfides, -sulfoxides and -sulfones are disclosed here, thus extending the scope of the fluorine gauche effect to the 3rd Period (F–C–C–S(O)_n; φ_FCCS ≈ 60°). Synergy between experiment and computation has revealed that the gauche effect is only pronounced in structures bearing an electropositive vicinal sulfur atom (S⁺–O^–, SO₂).     

Stabilizing the Homopolycation (I4)2+ with a Hexasulfate in (I4)[S6O19] and a Borosulfate in (I4)[B(S2O7)2]2

The reaction of elemental iodine and SO₃ in a sealed glass ampoule yielded a turquoise‐colored solution. At temperatures below 7 °C, deep red crystals of (I₄)[S₆O₁₉] grow. With the addition of B₂O₃ and pyridine‐SO₃ complex red crystals of (I₄)[B(S₂O₇)₂]₂ can be obtained after heating the mixture to 120 °C. The combination of an (I₄)²⁺ cation with oxoanions has previously not been observed. Both anions have a significant but different influence on the structural properties of the (I₄)²⁺ cation.     

Facilitated inversion complicates the stereodynamics of an SN2 reaction at nitrogen center

Bimolecular nucleophilic substitution (S_N2) reactions at carbon center are well known to proceed with the stereospecific Walden-inversion mechanism. Reaction dynamics simulations on a newly developed high-level ab initio analytical potential energy surface for the F⁻ + NH₂Cl nitrogen-centered S_N2 and proton-transfer reactions reveal a hydrogen-bond-formation-induced multiple-inversion mechanism undermining the stereospecificity of the N-centered S_N2 channel. Unlike the analogous F⁻ + CH₃Cl S_N2 reaction, F⁻ + NH₂Cl → Cl⁻ + NH₂F is indirect, producing a significant amount of NH₂F with retention, as well as inverted NH₂Cl during the timescale within the unperturbed NH₂Cl molecule gets inverted with only low probability, showing the important role of facilitated inversions via an FH…NHCl⁻-like transition state. Proton transfer leading to HF + NHCl⁻ is more direct and becomes the dominant product channel at higher collision energies.

Multiple-inversion, the analogue of the double-inversion pathway recently revealed for S_N2@C, is the key mechanism in S_N2 at N center undermining stereospecificity.     

Two Natural Flavonoid Substituted Polysaccharides from Tamarix chinensis: Structural Characterization and Anticomplement Activities

Two novel natural flavonoid substituted polysaccharides (MBAP-1 and MBAP-2) were obtained from Tamarix chinensis Lour. and characterized by HPGPC, methylation, ultra-high-performance liquid chromatography-ion trap tandem mass spectrometry (UPLC-IT-MSⁿ), and NMR analysis. The results showed that MBAP-1 was a homogenous heteropolysaccharide with a backbone of 4)-β-d-Glcp-(1→ and →3,4,6)-β-d-Glcp-(1→. MBAP-2 was also a homogenous polysaccharide which possessed a backbone of →3)-α-d-Glcp-(1→, →4)-β-d-Glcp-(1→ and →3,4)-β-d-Glcp-2-OMe-(1→. Both the two polysaccharides were substituted by quercetin and exhibited anticomplement activities in vitro. However, MBAP-1 (CH₅₀: 0.075 ± 0.004 mg/mL) was more potent than MBAP-2 (CH₅₀: 0.249 ± 0.006 mg/mL) and its reduced product, MBAP-1R (CH₅₀: 0.207 ± 0.008 mg/mL), indicating that multiple monosaccharides and uronic acids might contribute to the anticomplement activity of the flavonoid substituted polysaccharides of T. chinensis. Furthermore, the antioxidant activity of MBAP-1 was also more potent than that of MBAP-2. In conclusion, these two flavonoid substituted polysaccharides from T. chinensis were found to be potential oxidant and complement inhibitors.     

Exploration of the Crystal Structure and Thermal and Spectroscopic Properties of Monoclinic Praseodymium Sulfate Pr2(SO4)3

Praseodymium sulfate was obtained by the precipitation method and the crystal structure was determined by Rietveld analysis. Pr₂(SO₄)₃ is crystallized in the monoclinic structure, space group C2/c, with cell parameters a = 21.6052 (4), b = 6.7237 (1) and c = 6.9777 (1) Å, β = 107.9148 (7)°, Z = 4, V = 964.48 (3) ų (T = 150 °C). The thermal expansion of Pr₂(SO₄)₃ is strongly anisotropic. As was obtained by XRD measurements, all cell parameters are increased on heating. However, due to a strong increase of the monoclinic angle β, there is a direction of negative thermal expansion. In the argon atmosphere, Pr₂(SO₄)₃ is stable in the temperature range of T = 30–870 °C. The kinetics of the thermal decomposition process of praseodymium sulfate octahydrate Pr₂(SO₄)₃·8H₂O was studied as well. The vibrational properties of Pr₂(SO₄)₃ were examined by Raman and Fourier-transform infrared absorption spectroscopy methods. The band gap structure of Pr₂(SO₄)₃ was evaluated by ab initio calculations, and it was found that the valence band top is dominated by the p electrons of oxygen ions, while the conduction band bottom is formed by the d electrons of Pr³⁺ ions. The exact position of ZPL is determined via PL and PLE spectra at 77 K to be at 481 nm, and that enabled a correct assignment of luminescent bands. The maximum luminescent band in Pr₂(SO₄)₃ belongs to the ³P₀ → ³F₂ transition at 640 nm.     

Synthetic and Structural Study of peri-Substituted Phosphine-Arsines

A series of phosphorus-arsenic peri-substituted acenaphthene species have been isolated and fully characterised, including single crystal X-ray diffraction. Reactions of EBr₃ (E = P, As) with iPr₂PAcenapLi (Acenap = acenaphthene-5,6-diyl) afforded the thermally stable peri-substitution supported donor–acceptor complexes, iPr₂PAcenapEBr₂ 3 and 4. Both complexes show a strong P→E dative interaction, as observed by X-ray crystallography and ³¹P NMR spectroscopy. DFT calculations indicated the unusual As∙∙∙As contact (3.50 Å) observed in the solid state structure of 4 results from dispersion forces rather than metallic interactions. Incorporation of the excess AsBr₃ in the crystal structure of 3 promotes the formation of the ion separated species [iPr₂PAcenapAsBr]⁺Br⁻ 5. A decomposition product 6 containing the rare [As₆Br₈]^2– heterocubane dianion was isolated and characterised crystallographically. The reaction between iPr₂PAcenapLi and EtAsI₂ afforded tertiary arsine (BrAcenap)₂AsEt 7, which was subsequently lithiated and reacted with PhPCl₂ and Ph₂PCl to afford cyclic PhP(Acenap)₂AsEt 8 and acyclic EtAs(AcenapPPh₂)₂ 9.     

Computational Studies of Coinage Metal Anion M− + CH3X (X = F,Cl, Br,I) Reactions in Gas Phase

We characterized the stationary points along the nucleophilic substitution (S_N2), oxidative insertion (OI), halogen abstraction (XA), and proton transfer (PT) product channels of M⁻ + CH₃X (M = Cu, Ag, Au; X = F, Cl, Br, I) reactions using the CCSD(T)/aug-cc-pVTZ level of theory. In general, the reaction energies follow the order of PT > XA > S_N2 > OI. The OI channel that results in oxidative insertion complex [CH₃–M–X]⁻ is most exothermic, and can be formed through a front-side attack of M on the C-X bond via a high transition state OxTS or through a S_N2-mediated halogen rearrangement path via a much lower transition state invTS. The order of OxTS > invTS is inverted when changing M⁻ to Pd, a d¹⁰ metal, because the symmetry of their HOMO orbital is different. The back-side attack S_N2 pathway proceeds via typical Walden-inversion transition state that connects to pre- and post-reaction complexes. For X = Cl/Br/I, the invS_N2-TS’s are, in general, submerged. The shape of this M⁻ + CH₃X S_N2 PES is flatter as compared to that of a main-group base like F⁻ + CH₃X, whose PES has a double-well shape. When X = Br/I, a linear halogen-bonded complex [CH₃−X∙··M]⁻ can be formed as an intermediate upon the front-side attachment of M on the halogen atom X, and it either dissociates to CH₃ + MX⁻ through halogen abstraction or bends the C-X-M angle to continue the back-side S_N2 path. Natural bond orbital analysis shows a polar covalent M−X bond is formed within oxidative insertion complex [CH₃–M–X]⁻, whereas a noncovalent M–X halogen-bond interaction exists for the [CH₃–X∙··M]⁻ complex. This work explores competing channels of the M⁻ + CH₃X reaction in the gas phase and the potential energy surface is useful in understanding the dynamic behavior of the title and analogous reactions.     

Highly Fluorescent Dyes Containing Conformationally Restrained Pyrazolylpyrene (Pyrazoolympicene) Chromophore

The triflic-acid-promoted cyclization of 1-phenyl-3-(pyren-1-yl)-1H-pyrazole-4-carbaldehyde afforded a mixture of 9-phenyl-7,9-dihydropyreno (10,1-fg)indazole and 9-phenylpyreno(10,1-fg)indazole-7(9H)-one, readily separable by column chromatography. Both products contained a rigid six-ringed pyrazoolympicene backbone and exhibited bright fluorescence in chloroform solution and a weak fluorescence in the solid state. DFT and TD DFT calculations revealed that the lowest excited state (S₁) of these compounds is populated via HOMO →LUMO π-π * transition. Furthermore, the synthesized compounds behaved as weak bases and their emission spectra showed substantial changes upon protonation. Therefore, they may be of interest for sensing of strongly acidic fluorophore environments.     

Au3-to-Ag3 coordinate-covalent bonding and other supramolecular interactions with covalent bonding strength

An efficient strategy for designing charge-transfer complexes using coinage metal cyclic trinuclear complexes (CTCs) is described herein. Due to opposite quadrupolar electrostatic contributions from metal ions and ligand substituents, [Au(μ-Pz-(i-C₃H₇)₂)]₃·[Ag(μ-Tz-(n-C₃F₇)₂)]₃ (Pz = pyrazolate, Tz = triazolate) has been obtained and its structure verified by single crystal X-ray diffraction – representing the 1^st crystallographically-verified stacked adduct of monovalent coinage metal CTCs. Abundant supramolecular interactions with aggregate covalent bonding strength arise from a combination of M–M′ (Au → Ag), metal–π, π–π interactions and hydrogen bonding in this charge-transfer complex, according to density functional theory analyses, yielding a computed binding energy of 66 kcal mol⁻¹ between the two trimer moieties – a large value for intermolecular interactions between adjacent d¹⁰ centres (nearly doubling the value for a recently-claimed Au(i) → Cu(i) polar-covalent bond: Proc. Natl. Acad. Sci. U.S.A., 2017, 114, E5042) – which becomes 87 kcal mol⁻¹ with benzene stacking. Surprisingly, DFT analysis suggests that: (a) some other literature precedents should have attained a stacked product akin to the one herein, with similar or even higher binding energy; and (b) a high overall intertrimer bonding energy by inferior electrostatic assistance, underscoring genuine orbital overlap between M and M′ frontier molecular orbitals in such polar-covalent M–M′ bonds in this family of molecules. The Au → Ag bonding is reminiscent of classical Werner-type coordinate-covalent bonds such as H₃N: → Ag in [Ag(NH₃)₂]⁺, as demonstrated herein quantitatively. Solid-state and molecular modeling illustrate electron flow from the π-basic gold trimer to the π-acidic silver trimer with augmented contributions from ligand-to-ligand’ (LL′CT) and metal-to-ligand (MLCT) charge transfer.

A stacked Ag₃–Au₃ bonded (66 kcal mol⁻¹) complex obtained crystallographically exhibits charge-transfer characteristics arising from multiple cooperative supramolecular interactions.     

Modified cyclodextrins solubilize elemental sulfur in water and enable biological sulfane sulfur delivery

An important form of biological sulfur is sulfane sulfur, or S⁰, which is found in polysulfide and persulfide compounds as well as in elemental sulfur. Sulfane sulfur, often in the form of S₈, functions as a key energy source in the metabolic processes of thermophilic Archaean organisms found in sulfur-rich environments and can be metabolized both aerobically and anaerobically by different archaeons. Despite this importance, S₈ has a low solubility in water (∼19 nM), raising questions of how it can be made chemically accessible in complex environments. Motivated by prior crystallographic data showing S₈ binding to hydrophobic motifs in filamentous glycoproteins from the sulfur reducing Staphylothermus marinus anaerobe, we demonstrate that simple macrocyclic hydrophobic motifs, such as 2-hydroxypropyl β-cyclodextrin (2HPβ), are sufficient to solubilize S₈ at concentrations up to 2.0 ± 0.2 mM in aqueous solution. We demonstrate that the solubilized S₈ can be reduced with the common reductant tris(2-carboxyethyl)phosphine (TCEP) and reacts with thiols to generate H₂S. The thiol-mediated conversion of 2HPβ/S₈ to H₂S ranges from 80% to quantitative efficiency for Cys and glutathione (GSH). Moreover, we demonstrate that 2HPβ can catalyze the Cys-mediated reduction of S₈ to H₂S in water. Adding to the biological relevance of the developed systems, we demonstrate that treatment of Raw 264.7 macrophage cells with the 2HPβ/S₈ complex prior to LPS stimulation decreases NO₂⁻ levels, which is consistent with known activities of bioavailable H₂S and sulfane sulfur. Taken together, these investigations provide a new strategy for delivering H₂S and sulfane sulfur in complex systems and more importantly provide new insights into the chemical accessibility and storage of S⁰ and S₈ in biological environments.

Sulfane sulfur, or S⁰, is found in polysulfide and persulfide compounds in biology. We demonstrate that modified cyclodextrins can solubilize S₈ in water, increase its reactivity with biological nucleophiles, and enable delivery to live cells.