Quenching of biotinylated aequorin bioluminescence by dye-labeled avidin conjugates: application to homogeneous bioluminescence resonance energy transfer assays

[see reaction]. Avidin conjugates containing the covalently attached dyes QSY-7 and dabcyl were prepared and shown to quench the bioluminescence of biotinylated aequorin. Quenching efficiency was shown to be dependent on both the label-to-avidin ratio and the concentration of the avidin conjugate. These properties were exploited to develop a homogeneous bioluminescence resonance energy transfer (BRET) assay for biotin.     

CdTe quantum dots with green fluorescence generated by bioluminescence resonance energy transfer from aequorin

The need for external excitation sources limits the utility of quantum dots (QDs) in multiplexed detection schemes and in in vivo imaging, because it can lead to strong background by surface illumination and tissue autofluorescence. In this work, the authors describe the use of oxidized dextran as a support to conjugate the photoprotein aequorin to QDs in order to obtain self-illuminating QDs and an efficient QD-based bioluminescence (BL) resonance energy system. On addition of Ca²⁺, BL is generated by immobilized aequorin and transferred to the QDs which thereby become photoexcited. Hence, these QDs will fluoresce without being excited by an external light source and therefore have the typical merits (such as very low background) of bioluminescent systems. The half-life of the BL of aequorin peaking at 460 nm is 1.6 s, and that of the QD-conjugated aequorin (peaking at 528 nm) is 6.4 s. We perceive that by labeling antibodies with these nanocomposites, highly advanced multiplex immunoassays will become possible.

Open image in new window

Graphical abstract The photoprotein aequorin was conjugated to CdTe quantum dots coated wit denatured and reduced bovine serum albumin (dBSA)  by using oxidized dextran as a cross linker, which leads to the formation of self-illuminating QDs.

     

Applications of fluorescence and bioluminescence resonance energy transfer to drug discovery at G protein coupled receptors

The role of G protein coupled receptors (GPCRs) in numerous physiological processes that may be disrupted or modified in disease makes them key targets for the development of new therapeutic medicines. A wide variety of resonance energy transfer (RET) techniques such as fluorescence RET and bioluminescence RET have been developed in recent years to detect protein–protein interactions in living cells. Furthermore, these techniques are now being exploited to screen for novel compounds that activate or block GPCRs and to search for new, previously undiscovered signaling pathways activated by well-known pharmacologically classified drugs. The high resolution that can be achieved with these RET methods means that they are well suited to study both intramolecular conformational changes in response to ligand binding at the receptor level and intermolecular interactions involving protein translocation in subcellular compartments resulting from external stimuli. In this review we highlight the latest advances in these technologies to illustrate general principles.     

Quantum pathways for resonance energy transfer

A quantum electrodynamical calculation is presented that focuses individually on the two quantum pathways or time orderings for resonance energy transfer. Conventional mathematical procedures necessitate summing the quantum pathway amplitudes at an early stage in the calculations. Here it is shown, by the adoption of a different strategy that allows deferral of the amplitude summation, that it is possible to elicit key information regarding the relative significance of the two pathways and their distinct distance dependences. A special function integration method delivers equations that also afford new insights into the behavior of virtual photons. It is explicitly demonstrated that both time-ordered pathways are effective at short distances, while in the far field the dissipation of virtual traits favors one pathway. Hitherto unknown features are exhibited in the oblique asymptotic behavior of the time-ordered contributions and their quantum interference. Consistency with the rate equations of resonance energy transfer is demonstrated and results are presented graphically.     

Buffer enhanced bioluminescence resonance energy transfer sensor based on Gaussia luciferase for in vitro detection of protease

Bioluminescence resonance energy transfer (BRET) has gained favors in recent years as a detection technology for protease activity due to its extreme reliability, high sensitivity and low intrinsic backgrounds. Because of the sensitivity of the donors, substrates and the acceptors, it is expected that BRET systems are sensitive to buffer environments. However, no systematic study has been reported on how buffer components would affect the BRET ratio, and thus affect the determination of protease activity based on BRET. We present here that several environmental factors, including buffer agents, pH and divalent metal ions, influenced BRET ratio significantly, when humanized Gaussia luciferase (hGluc) was utilized as the donor and enhanced yellow fluorescence protein (EYFP) as the acceptor. Based on these findings, an enhancing solution was optimized to improve the performance of the BRET sensor for analysis of enterokinase activity in vitro, resulting in 10-fold and 7-fold improvement of the sensitivity and the detection limit, respectively. We anticipate the system will be applicable for improving performance of other in vitro BRET protease sensors, especially when the optimal conditions for protease activity would severely affect the BRET signal.     

The smallest resonance energy transfer acceptor for tryptophan

The utility of diazirine ligands as acceptors in resonance energy transfer (RET) distance measurements with tryptophan or tryptophan analogues as donor is reported. The principle is demonstrated for a diazirine derivative of d-mannitol, 2-azi-2-deoxy-d-arabino-hexitol, and single-tryptophan-containing mutants of the mannitol transporter, EIImtl, from E. coli. The F?rster distance is 10 A for the tryptophan-diazirine donor-acceptor couple, allowing the measurement of distances up to 17 A. The versatility of tryptophan as an intrinsic spectroscopic probe in protein chemistry and the small size of the diazirine group makes this a very attractive donor-acceptor couple for accurate RET distance information in protein chemistry.     

Polaron-exciton model of resonance energy transfer

It is shown that F?rster's expression for the electronic energy transfer rate can be recast in a form predicted for exciton motion that interacts strongly with molecular vibrations. Using a simple model based on the Kennard-Stepanov theory, F?rster's expression for the spectral overlap is shown to be of a thermally activated form, as obtained previously by multiphonon theory. In contrast, the high-frequency internal vibrations contribute a factor which results from tunneling through a potential barrier between potential curves in the configuration coordinate diagram. We thus show that resonance energy transfer is equivalent to phonon-assisted hopping of a trapped excitonic polaron.     

Quantum efficiency improvement of a cesium based resonance fluorescence detector by helium-induced collisional excitation energy transfer

Quantum efficiency improvement of a cesium based resonance fluorescence detector (RFD) was achieved by enhancing the transfer in a particular channel of the RFD excitation scheme with noble gas-induced collisional excitation energy transfer (CEET). The influence of Cs–Ar and Cs–He collisional mixing between the 6D and 7P states in cesium on the quantum efficiency of the 6S → 6D → 7P → 6S excitation scheme was investigated by fluorescence measurements at relevant transitions. Ar-induced CEET was found to have little effect on the fluorescence response and quantum efficiency of the Cs RFD excitation scheme. However, a 35 fold quantum efficiency increase in the cesium resonance fluorescence detector response at only moderate He pressures was observed.     

Quantum dot-based multiplexed fluorescence resonance energy transfer

We demonstrate the use of luminescent quantum dots (QDs) conjugated to dye-labeled protein acceptors for nonradiative energy transfer in a multiplexed format. Two configurations were explored: (1) a single color QD interacting with multiple distinct acceptors and (2) multiple donor populations interacting with one type of acceptor. In both cases, we showed that simultaneous energy transfer between donors and proximal acceptors can be measured. However, data analysis was simpler for the configuration where multiple QD donors are used in conjunction with one acceptor. Steady-state fluorescence results were corroborated by time-resolved measurements where selective shortening of QD lifetime was measured only for populations that were selectively engaged in nonradiative energy transfer.     

Fluorescence resonance energy transfer in dye-labeled DNA

We present the results of molecular modeling of dye-labeled, double-stranded DNA. The structural information obtained from the simulations are used as input to an analysis of energy transfer in this system. The simulations reveal the nature of the interaction between a pair of fluorophores and DNA. The donor, tetramethylrhodamine, TMR, attached to the 5′-end of DNA with a six-carbon tether, interacts primarily with DNA's minor groove, but occasionally stacks against the DNA base pairs. The acceptor, Cy5, attached to the opposite strand at positions n (n = 7, 12, 14, 16, 19, 24, 27), binds in the major groove in two distinct locations on the upper and lower part of the groove. We analyzed in detail the dye-to-dye distances, dipole orientation factors and fluorescence resonance energy transfer (FRET) rates. Tests of the validity of the Förster model were conducted using the transition density cube (TDC) method, which provides the exact Coulombic interaction within a certain model chemistry. Our studies show that the use of long tethers does not guarantee rotational freedom of the dyes, as intended in the experiments. Instead, the tethers allow Cy5 to bind in two different geometries, which causes a large uncertainty in the dye-to-dye distances. Our results also show significant fluctuation in the orientation factor, κ², which, together with uncertainty in dye-to-dye distances, cause considerable uncertainty in interpreting FRET measurements. We suggest that molecular modeling, combined with the TDC method, provides a useful tool in designing and interpreting FRET experiments.     

Single-molecule quantum-dot fluorescence resonance energy transfer.

Colloidal semiconductor quantum dots are promising for single-molecule biological imaging due to their outstanding brightness and photostability. As a proof of concept for single-molecule fluorescence resonance energy transfer (FRET) applications, we measured FRET between a single quantum dot and a single organic fluorophore Cy5. DNA Holliday junction dynamics measured with the quantum dot/Cy5 pair are identical to those obtained with the conventional Cy3/Cy5 pair, that is, conformational changes of individual molecules can be observed by using the quantum dot as the donor.     

Fluorescence resonance energy transfer in polydiacetylene liposomes

Conjugated polydiacetylene (PDA) possessing stimuli-responsive properties has been intensively investigated for developing efficient sensors. We report here fluorescence resonance energy transfer (FRET) in liposomes synthesized using different molar ratios of dansyl-tagged diacetylene and diacetylene-carboxylic acid monomers. Photopolymerization of diacetylene resulted in cross-linked PDA liposomes. We used steady-state electronic absorption, emission, and fluorescence anisotropy (FA) analysis to characterize the thermal-induced FRET between dansyl fluorophores (donor) and PDA (acceptor). We found that the monomer ratio of acceptor to donor ( R ad) and length of linkers (functional part that connects dansyl fluorophores to the diacetylene group in the monomer) strongly affected FRET. For R ad = 10 000, the acceptor emission intensity was amplified by more than 18 times when the liposome solution was heated from 298 to 338 K. A decrease in R ad resulted in diminished acceptor emission amplification. This was primarily attributed to lower FRET efficiency between donors and acceptors and a higher background signal. We also found that the FRET amplification of PDA emissions after heating the solution was much higher when dansyl was linked to diacetylene through longer and flexible linkers than through shorter linkers. We attributed this to insertion of dansyl in the bilayer of the liposomes, which led to an increased dansyl quantum yield and a higher interaction of multiple acceptors with limited available donors. This was not the case for shorter and more rigid linkers where PDA amplification was much smaller. The present studies aim at enhancing our understanding of FRET between fluorophores and PDA-based conjugated liposomes. Furthermore, receptor tagged onto PDA liposomes can interact with ligands present on proteins, enzymes, and cells, which will produce emission sensing signal. Therefore, using the present approach, there exist opportunities for designing FRET-based highly sensitive and selective chemical and biochemical sensors.     

An activated scheme for resonance energy transfer in conjugated materials

Energy transfer mechanism in conjugated materials has been demonstrated with an activated expression, which is equivalent to Fermi's golden rule. Spectral overlap integrals obtained from simulated spectra of model chromophores agree very well with the results obtained with the activated formula. Although this approach works best for chromophores with spectral profiles resembling a Gaussian distribution, the activated expression formula also performs quite well for chromophores with vibronically resolved spectra. Activation energies for exciton hopping can also be predicted using a phonon coupled exciton relaxation scheme. The accuracy of predictions with this new approach is quite attractive and hence should allow practical applications.     

Ultrafast dynamics of resonance energy transfer in cryptochrome

In this communication, we report the ultrafast dynamics of resonance energy transfer in a blue-light photoreceptor, Vibrio cholerae cryptochrome. The transfer was observed to occur in 60 ps. We also studied the local rigidity and solvation around the binding site of the photoantenna molecule. The results for the first time show energy transfer in cryptochrome suggesting some mechanistic similarities between photolyase that repairs damaged DNA and cryptochrome that mediates blue-light signaling.     

Solution-phase single quantum dot fluorescence resonance energy transfer

We present a single particle fluorescence resonance energy transfer (spFRET) study of freely diffusing self-assembled quantum dot (QD) bioconjugate sensors, composed of CdSe-ZnS core-shell QD donors surrounded by dye-labeled protein acceptors. We first show that there is direct correlation between single particle and ensemble FRET measurements in terms of derived FRET efficiencies and donor-acceptor separation distances. We also find that, in addition to increased sensitivity, spFRET provides information about FRET efficiency distributions which can be used to resolve distinct sensor subpopulations. We use this capacity to gain information about the distribution in the valence of self-assembled QD-protein conjugates and show that this distribution follows Poisson statistics. We then apply spFRET to characterize heterogeneity in single sensor interactions with the substrate/target and show that such heterogeneity varies with the target concentration. The binding constant derived from spFRET is consistent with ensemble measurements.     

Simple chemiluminescence aptasensors based on resonance energy transfer

In the present work, two aptamer-based probes and related sensor systems were developed with chemiluminescence signaling. The detection was based on "turning-on" chemiluminescence with switching "off" of the resonance energy transfer after the aptamer's recognition of the target molecule. In this design, a DNA/aptamer duplex linked a chemiluminescence group and a gold nanoparticle together. Only low-intensity chemiluminescence was obtained due to the highly efficient resonance energy transfer. After introducting the target molecule, structure-switching took place with turning off the energy transfer; thus, a restoration and turning on of the chemiluminescence was obtained. The two designs differed in the chemiluminescence groups, since one was a covalently linked luminol molecule, while the other was a conjugated horseradish peroxidase for the catalysis of further chemiluminescence reactions. These schemes provided simple and effective sensing toward a model analyte, adenosine.     

Fluorescence resonance energy transfer in conjugated polymer composites for radiation detection

Fluorescence resonance energy transfer in conjugated polymer composite materials was exploited for the detection of gamma ray dosage with high sensitivity and response linearity.