Nucleic acid detection using carbon nanoparticles as a fluorescent sensing platform

In this communication, we demonstrate for the first time the proof of concept that carbon nanoparticles (CNPs) can be used as an effective fluorescent sensing platform for nucleic acid detection with selectivity down to single-base mismatch. The dye-labeled single-stranded DNA (ssDNA) probe is adsorbed onto the surface of the CNP via π-π interaction, quenching the dye. In the target assay, a double-stranded DNA (dsDNA) hybrid forms, recovering dye fluorescence.     

水溶性碳纳米粒子的制备及其在DNA和单核苷酸多态性分析中的应用

利用电化学氧化的方法制备了水溶性好、粒径为7～12nm的碳纳米粒子,该碳纳米粒子通过π-π相互作用吸附荧光标记的单链DNA探针,并能有效地猝灭其荧光．当单链DNA探针与匹配的DNA目标分子杂交形成双链DNA时,猝灭的荧光被恢复,由此可以检测1-200nmol／L的DNA目标分子。此外,在碳纳米粒子存在时,由荧光标记的DNA探针和DNA目标分子形成的双链DNA的熔解温度可以简便地被测定,当双链DNA有错配碱基时,其熔解温度降低,由此可方便、快速地分析单核苷酸多态性．     

Electrochemical biosensor for microRNA detection based on hybridization protection against nuclease S1 digestion

Nuclease S1 can catalyze the nonspecific endo- and exonucleolytic cleavage of single-stranded DNA and RNA to yield nucleoside 5′-phosphates and 5′-phosphooligonucleotides. However, it cannot hydrolyze double-stranded DNA, double-stranded RNA, or DNA-RNA hybrid. Inspired by this specific property, a simple electrochemical method was developed for microRNA detection based on hybridization protection against nuclease S1 digestion. In the absence of hybridization process, the assembled probe DNA on the electrode surface can be easily digested by nuclease S1 and a strong electrochemical signal can be generated due to the decreased repulsive force towards the redox probe. However, after hybridization with target microRNA, the digestion activity of nuclease S1 is inhibited, which can lead to a weak electrochemical signal. Based on the change of the electrochemical signal, the detection of target microRNA-319a can be achieved. Under optimal experiment conditions, the electrochemical signal was proportional to microRNA-319a concentration from 1000 to 5 pM and the detection limit was 1.8 pM (S/N = 3). The developed method also showed high detection selectivity and reproducibility. Furthermore, the proposed method was successfully applied to assay the expression level of microRNA-319a in the leaves of rice seedlings after being incubated with different concentrations of 6-benzylaminopurine.     

Magnetic porous carbon nanocomposites derived from metal-organic frameworks as a sensing platform for DNA fluorescent detection

Metal-organic frameworks (MOFs) have emerged as very fascinating functional materials due to their tunable nature and diverse applications. In this work, we prepared a magnetic porous carbon (MPC) nanocomposite by employing iron-containing MOFs (MIL-88A) as precursors through a one-pot thermolysis method. It was found that the MPC can absorb selectively single-stranded DNA (ssDNA) probe to form MPC/ssDNA complex and subsequently quench the labelled fluorescent dye of the ssDNA probe, which is resulted from the synergetic effect of magnetic nanoparticles and carbon matrix. Upon the addition of complementary target DNA, however, the absorbed ssDNA probe could be released from MPC surface by forming double-stranded DNA with target DNA, and accompanied by the recovery of the fluorescence of ssDNA probe. Based on these findings, a sensing platform with low background signal for DNA fluorescent detection was developed. The proposed sensing platform exhibits high sensitivity with detection limit of 1 nM and excellent selectivity to specific target DNA, even single-base mismatched nucleotide can be distinguished. We envision that the presented study would provide a new perspective on the potential applications of MOF-derived nanocomposites in biomedical fields.     

A sensitive fluorescence turn-on assay of bleomycin and nuclease using WS2 nanosheet as an effective sensing platform

As an important antitumor drug, bleomycin (BLM) is widely used in the treatment of a variety of cancers. In addition, nucleases play a crucial role in DNA replication, recombination and repair which are associated with cancer development. Thus, the development of BLM and nuclease detection methods is of great significance in cancer therapy and related biological mechanism research. Here, a WS₂ nanosheet-based turn-on fluorescent sensing platform for simple, fast and sensitive detection of BLM and nuclease was reported. WS₂ nanosheet exhibits different affinity toward ssDNA with different length and excellent fluorescence quenching ability. A fluorescein (FAM)-labeled long ssDNA could be adsorbed on the surface of WS₂ nanosheet and the fluorescence was therefore quenched. In the presence of BLM·Fe(II) or S1 nuclease (a ssDNA-specific nuclease which was used as a model enzyme), an irreversible scission of long ssDNA was underwent through the BLM-induced oxidation cleavage or S1 nuclease-induced enzymatic hydrolysis. Short FAM-linked oligonucleotide fragments which could not be adsorbed on the nanosheet surface were then produced, resulting in a weak fluorescence quenching after mixing WS₂ nanosheets. Thus, the fluorescence signal was restored. The proposed sensor displays a wide linear range and a high sensitivity with a detection limit of 0.3 nM for BLM and 0.01 U mL⁻¹ for S1 nuclease. It also exhibits a good performance in complex biological samples. This method not only provides a strategy for BLM or S1 nuclease assay but also offers a potential application in biomedical and clinical study.     

Characterization of single- and double-stranded DNA on gold surfaces

Single- and double-stranded deoxy ribonucleic acid (DNA) molecules attached to self-assembled monolayers (SAMs) on gold surfaces were characterized by a number of optical and electronic spectroscopic techniques. The DNA-modified gold surfaces were prepared through the self-assembly of 6-mercapto-1-hexanol and 5'-C(6)H(12)SH -modified single-stranded DNA (ssDNA). Upon hybridization of the surface-bound probe ssDNA with its complimentary target, formation of double-stranded DNA (dsDNA) on the gold surface is observed and in a competing process, probe ssDNA is desorbed from the gold surface. The competition between hybridization of ssDNA with its complimentary target and ssDNA probe desorption from the gold surface has been investigated in this paper using X-ray photoelectron spectroscopy, chronocoulometry, fluorescence, and polarization modulation-infrared reflection absorption spectroscopy (PM-IRRAS). The formation of dsDNA on the surface was identified by PM-IRRAS by a dsDNA IR signature at approximately 1678 cm(-)(1) that was confirmed by density functional theory calculations of the nucleotides and the nucleotides' base pairs. The presence of dsDNA through the specific DNA hybridization was additionally confirmed by atomic force microscopy through colloidal gold nanoparticle labeling of the target ssDNA. Using these methods, strand loss was observed even for DNA hybridization performed at 25 degrees C for the DNA monolayers studied here consisting of attachment to the gold surfaces by single Au-S bonds. This finding has significant consequence for the application of SAM technology in the detection of oligonucleotide hybridization on gold surfaces.     

Highly sensitive determination of ssDNA and real-time sensing of nuclease activity and inhibition based on the controlled self-assembly of a 9,10-distyrylanthracene probe

We report here a fluorescent biosensor for highly sensitive determination of single-stranded DNA (ssDNA) with remarkable fluorescence enhancement and label-free sensing of S1 nuclease activity and inhibition in real time based on ssDNA-controlled self-assembly of a 9,10-distyrylanthracene (DSA) probe with the aggregation-induced emission (AIE) property, thereby avoiding a sophisticated fabrication process and aggregation-caused quenching (ACQ) effect. Compared with previous technologies, this assay has some advantages. First, since the DSA probe can be synthesized through a simple and effective synthetic route and the sensing technology adopts the unlabelled ssDNA, this biosensor shows advantages of simplicity and cost efficiency. Besides, for the determination of ssDNA, S1 nuclease, and inhibitor, the DSA-based probe provides high sensitivity and a good linear relationship due to the AIE property. As a result, we determined the DNA 24-mer concentration as low as 150 pM, and we are able to detect ssDNA lengths with a linear range from 6mer to 24mer (R?=?0.998) as well as DNA 24-mer concentrations with a linear range from 0 to 200 nM (R?=?0.998) and S1 nuclease concentrations with a linear range from 6 to 32 U ml^?1 (R?=?0.995), respectively. Moreover, the fluorescent intensity with various concentrations of S1 nuclease becomes highly discriminating after 3–16 min. Thus, it is possible to detect nuclease activity within 3–16 min, which demonstrates another advantage of a quick response of the present biosensor system.     

富含胞嘧啶单链DNA-银纳米簇荧光探针用于S1核酸酶的灵敏检测

以富含胞嘧啶（C）的单链DNA为模板合成银纳米簇,将其作为功能化探针,建立了一种无标记荧光检测S1核酸酶的方法.S1核酸酶可以特异性识别单链DNA,在最适的酶催化反应条件下,可将其降解为单核苷酸或寡核苷酸片段.当S1核酸酶不存在时,富含C的单链DNA可以有效地合成荧光银纳米簇;当S1核酸酶存在时,单链DNA模板被特异性识别并降解,导致无法形成银纳米簇,使体系荧光信号降低.实验结果表明,银纳米簇的荧光强度随着S1核酸酶浓度的增加而降低.在优化的条件下,体系荧光信号（F/F₀）与S1核酸酶的浓度在5.0×10^-5~4.0×10^-3 U/μL范围内呈线性关系,检出限为2.0×10^-6 U/μL.该荧光探针选择性好,可用于RPMI 1640细胞培养基中S1核酸酶的检测,回收率达到91.8%~109.5%.     

基于银纳米粒子构建荧光传感平台用于核酸检测

报道了基于银纳米粒子构建的荧光传感平台,并用于核酸检测.此荧光传感平台对核酸检测基于以下策略:首先,荧光团标记的单链DNA探针被吸附到银纳米粒子的表面,荧光团与银纳米粒子近距离接触,发生荧光猝灭;加入与探针DNA序列互补的目标DNA,两者杂交形成双链DNA,并从银纳米粒子的表面脱离,荧光得到恢复.这种银纳米粒子构建的荧...     

Development of Flow Cytometric Assay for Detecting Papillary Thyroid Carcinoma Related hsa-miR-146b-5p through Toehold-Mediated Strand Displacement Reaction on Magnetic Beads

In this work, a simple enzyme-free flow cytometric assay (termed as TSDR-based flow cytometric assay) has been developed for the detection of papillary thyroid carcinoma (PTC)-related microRNA (miRNA), hsa-miR-146b-5p with high performance through the toehold-mediated strand displacement reaction (TSDR) on magnetic beads (MBs). The complementary single-stranded DNA (ssDNA) probe of hsa-miR-146b-5p was first immobilized on the surface of MB, which can partly hybridize with the carboxy-fluorescein (FAM)-modified ssDNA, resulting in strong fluorescence emission. In the presence of hsa-miR-146b-5p, the TSDR is trigged, and the FAM-modified ssDNA is released form the MB surface due to the formation of DNA/RNA heteroduplexes on the MB surface. The fluorescence emission change of MBs can be easily read by flow cytometry and is strongly dependent on the concentration of hsa-miR-146b-5p. Under optimal conditions, the TSDR-based flow cytometric assay exhibits good specificity, a wide linear range from 5 to 5000 pM and a relatively low detection limit (LOD, 3σ) of 4.21 pM. Moreover, the practicability of the assay was demonstrated by the analysis of hsa-miR-146b-5p amounts in different PTC cells and clinical PTC tissues.     

A novel fluorescent biosensor for sequence-specific recognition of double-stranded DNA with the platform of graphene oxide

A fluorescent biosensor for sequence-specific recognition of double-stranded DNA (dsDNA) was developed based upon the DNA hybridization between dye-labeled single-stranded DNA (ssDNA) and double-stranded DNA. The fluorescence of FAM-labeled single-stranded DNA was quenched when it adsorbed on the surface of graphene oxide (GO). Upon addition of the target dsDNA, a homopyrimidine·homopurine part of dsDNA on the Simian virus 40 (SV40) (4424-4440, gp6), hybridization occurred between the dye-labeled DNA and the target dsDNA, which induced the dye-labeled DNA desorbed from the surface of GO, and turned on the fluorescence of the dye. Under the optimum conditions, the enhanced fluorescence intensity was proportional to the concentration of target dsDNA in the range 40.0-260 nM, and the detection limit was found to be 14.3 nM alongside the good sequence selectivity.     

A graphene-based real-time fluorescent assay of deoxyribonuclease I activity and inhibition

Using the remarkable difference in the affinity of graphene oxide (GO) with double strand DNA (dsDNA) and short DNA fragments, we report for the first time a GO-based nonrestriction nuclease responsive system. Our system was composed of GO and a fluorescent dye fluorescein amidite (FAM)-labeled dsDNA substrate (F-dsDNA). At first, the fluorescence of this F-dsDNA substrate was quenched upon addition of GO. When nuclease was added to the mixture of dsDNA and GO, hydrolysis of dsDNA was initiated and small DNA fragments were produced. As a result, the short FAM-linked DNA fragments were released from GO due to the weak affinity of GO with short DNA fragments, and the fluorescence got a restoration. At present, many sensing systems are based on the fact that GO prefers to bind long single strand DNA (ssDNA) over dsDNA or short ssDNA. As for our system, GO has a prior binding with dsDNA over short DNA fragments. Compared with previous methods, this assay platform has some advantages. First, since GO can be prepared in large quantities from graphite available at very low cost, this method shows advantages of simplicity and cost efficiency. Besides, the proposed GO-based nuclease assay provides high sensitivity due to the super quenching capacity of GO. Using deoxyribonuclease I (DNase I) as a model system, DNase I activity can be quantitatively analyzed by the velocity of the enzymatic reaction, and 1.75 U mL⁻¹ DNase I can be significantly detected. Moreover, the fluorescent intensity with various concentrations of nuclease becomes highly discriminating after 3–8 min. Thus, it is possible to detect nuclease activity within 3–8 min, which demonstrates another advantage of quick response of the present system. Finally, use of dsDNA as substrate, our method can achieve real-time nuclease activity/inhibition assay, which is time-saving and effortless.     

Topographical and functional characterization of the ssDNA probe layer generated through EDC-mediated covalent attachment to nanocrystalline diamond using fluorescence microscopy

The covalent attachment method for DNA on nanocrystalline diamond (NCD), involving the introduction of COOH functionalities on the surface by photoattachment of 10-undecenoic acid (10-UDA), followed by the 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC)-mediated coupling to NH 2-labeled ssDNA, is evaluated in terms of stability, density, and functionality of the resulting biological interface. This is of crucial importance in DNA biosensor development. The covalent nature of DNA attachment will infer the necessary stability and favorable orientation to the ssDNA probe molecules. Using confocal fluorescence microscopy, the influence of buffer type for the removal of excess 10-UDA and ssDNA, the probe ssDNA length, the probe ssDNA concentration, and the presence of the COOH-linker on the density and functionality of the ssDNA probe layer were investigated. It was determined that the most homogeneously dense and functional DNA layer was obtained when 300 pmol of short ssDNA was applied to COOH-modified NCD samples, while H-terminated NCD was resistant for DNA attachment. Exploiting this surface functionality dependence of the DNA attachment efficiency, a shadow mask was applied during the photochemical introduction of the COOH-functionalities, leaving certain regions on the NCD H-terminated. The subsequent DNA attachment resulted in a fluorescence pattern corresponding to the negative of the shadow mask. Finally, NCD surfaces covered with mixtures of the 10-UDA linker molecule and a similar molecule lacking the COOH functionality, functioning as a lateral spacer, were examined for their suitability in preventing nonspecific adsorption to the surface and in decreasing steric hindrance. However, purely COOH-modified NCD samples, patterned with H-terminated regions and treated with a controlled amount of probe DNA, proved the most efficient in fulfilling these tasks.     

Carbon nanotube-DNA hybrid used for activity monitoring and inhibitor screening of nuclease

Carbon nanotubes (CNTs) can efficiently quench the fluorescence of the adsorbed fluorophores and nonconvalently interact with soft single-stranded DNA (ssDNA). Upon disruption of CNTs–fluorescent oligonucleotides hybrid by nuclease S1, fluorescence turn-on was observed. Using this strategy, a platform based on fluorescence signal for monitoring the activity of nuclease with advantages of high sensitivity and commonality was established, and a linear relationship between initial cleavage reaction rate and nuclease S1 concentration is found in the range of 0.6–8.0 U mL⁻¹ with a detection limit of 0.08 U mL⁻¹. Furthermore, by taking pyrophosphate as an example, we use the assay to evaluate the prohibition effect on nuclease, and the extent of fluorescence recovery decreased linearly with increasing the concentration of pyrophosphate in the range of 0.2–1.4 mM, implying that the cleavage reaction by nuclease S1 was prohibited, and therefore this fluorescence assay can also be conveniently utilized for inhibitor screening of nuclease.     

Tethered thiazole orange intercalating dye for development of fibre-optic nucleic acid biosensors

Single-stranded DNA (ssDNA) oligonucleotide in solution, or that is immobilized onto a surface to create a biosensor, can be used as a selective probe to bind to a complementary single-stranded sequence. Fluorescence enhancement of thiazole orange (TO) occurs when the dye intercalates into double-stranded DNA (dsDNA). TO dye has been covalently attached to probe oligonucleotides (homopolymer and mixed base 10mer and 20mer) through the 5′ terminal phosphate group using polyethylene glycol linker. The tethered TO dye was able to intercalate when dsDNA formed in solution, and also at fused silica surfaces using immobilized ssDNA. The results indicated the potential for development of a self-contained biosensor where the fluorescent label was available as part of the immobilized oligonucleotide probe chemistry. The approach was shown to be able to operate in a reversible manner for multiple cycles of detection of targeted DNA sequences.     

Non-covalent anionic porphyrin functionalized multi-walled carbon nanotubes as an optical probe for specific DNA detection

With water-soluble anionic tetra (p-carboxyphenyl) porphyrin (TCPP) to solubilize multi-walled carbon nanotubes (MCNTs), we obtained a suspension that could be stable more than 1 week. With this TCPP/MCNTs suspension, we propose a spectrofluorometric method of DNA hybridization in this contribution. Our basic finding for this work is that the fluorescence from a dye-tagged single stranded DNA (ssDNA), which was directly added to the TCPP/MCNTs suspension, gets quenched, and the fluorescence could be remained if the dye-tagged single stranded DNA is first to be hybridized with its complementary target DNA to form a double stranded DNA (dsDNA) hybrid and added into the TCPP/MCNTs suspension. Mechanism investigations showed that the reason for the former is due to the adsorption of ssDNA on the surfaces of MCNTs, and that for the latter is due to the strong electrostatic repulsion force between the negative charge TCPP/MCNTs complexes and dsDNA. Thus, target DNA in a DNA sample and single-base mismatch in DNA sequences could be easily detected.     

Label‐Free and Label Based Electrochemical Detection of Hybridization by Using Methylene Blue and Peptide Nucleic Acid Probes at Chitosan Modified Carbon Paste Electrodes

A chitosan modified carbon paste electrode (ChiCPE) based DNA biosensor for the recognition of calf thymus double stranded DNA (dsDNA), single stranded DNA (ssDNA) and hybridization detection between complementary DNA oligonucleotides is presented. DNA and oligonucleotides were electrostatically attached by using chitosan onto CPE. The amino groups of chitosan formed a strong complex with the phosphate backbone of DNA. The immobilized probe could selectively hybridize with the target DNA to form hybrid on the CPE surface. The detection of hybridization was observed by using the label‐free and label based protocols. The oxidation signals of guanine and adenine greatly decreased when a hybrid was formed on the ChiCPE surface. The changes in the peak currents of methylene blue (MB), an electroactive label, were observed upon hybridization of probe with target. The signals of MB were investigated at dsDNA modified ChiCPE and ssDNA modified ChiCPE and the increased peak currents were observed, in respect to the order of electrodes. The hybridization of peptide nucleic acid (PNA) probes with the DNA target sequences at ChiCPE was also investigated. Performance characteristics of the sensor were described, along with future prospects.     

DNA and PNA sensing on mercury and carbon electrodes by using methylene blue as an electrochemical label

Described here are the electrochemical parameters for MB on binding to DNA at hanging mercury drop electrode (HMDE), glassy carbon electrode (GCE), and carbon paste electrode (CPE) in the solution and at the electrode surface. MB, which interacts with the immobilized calf thymus DNA, was detected by using single-stranded DNA-modified HMDE or CPE (ssDNA-modified HMDE or CPE), bare HMDE or CPE, and double-stranded DNA-modified HMDE or CPE (dsDNA-modified HMDE or CPE) in combination with adsorptive transfer stripping voltammetry (AdTSV), differential pulse voltammetry (DPV), and alternating current voltammetry (ACV) techniques. The structural conformation of DNA and hybridization between synthetic peptide nucleic acid (PNA) and DNA oligonucleotides were determined by the changes in the voltammetric peak of MB. The PNA and DNA probes were also challenged with excessive and equal amount of noncomplementary DNA and a mixture that contained one-base mismatched and target DNA. The partition coefficient was also obtained from the signal of MB with probe, hybrid, and ssDNA-modified GCEs. The effect of probe, target, and ssDNA concentration upon the MB signal was investigated. These results demonstrated that MB could be used as an effective electroactive hybridization indicator for DNA biosensors. Performance characteristics of the sensor are described, along with future prospects.     

Probe accessibility effects on the performance of electrochemical biosensors employing DNA monolayers

Surface-confined DNA probes are increasingly used as recognition elements (or presentation scaffolds) for detection of proteins, enzymes, and other macromolecules. Here we demonstrate that the density of the DNA probe monolayer on the gold electrode is a crucial determinant of the final signalling of such devices. We do so using redox modified single-stranded and double-stranded DNA probes attached to the surface of a gold electrode and measuring the rate of digestion in the presence of a non-specific nuclease enzyme. We demonstrate that accessibility of DNA probes for binding to their macromolecular target is, as expected, improved at lower probe densities. However, with double-stranded DNA probes, even at the lowest densities investigated, a significant fraction of the immobilized probe is inaccessible to nuclease digestion. These results stress the importance of the accessibility issue and of probe density effects when DNA-based sensors are used for detection of macromolecular targets.