微孔-微孔复合分子筛的结构特征及应用

微孔-微孔复合分子筛是指两种(或多种)微孔分子筛的复合晶体,不仅具备单一分子筛的特性,而且由于复合过程中产生的结构畸变使其具有独特的孔道结构和酸性质,进而体现出优异的催化反应特性,成为当今分子筛领域的研究热点。微孔-微孔复合分子筛可分为共晶分子筛和共生分子筛两种,前者通过两种分子筛晶体的无限成分单元重排,有利于构成新的完整的晶体结构,后者则是两种分子筛共生长过程中得到的两相交错生长的复合体,产生微结构畸变和界面效应。本文对微孔-微孔复合分子筛进行归纳和分类,并系统介绍了微孔-微孔复合分子筛的研究进展,着重阐述了共晶分子筛和共生分子筛的合成与微结构特点以及在催化反应领域中的应用。     

微孔-介孔复合结构分子筛的合成及表征研究

以工业现有的ZSM-5作为原料,经一定化学处理的ZSM-5作为部分硅铝源,与介孔分子筛的凝胶在水热条件下进行组装得到具有微孔、介孔双孔分布的复合分子筛,并采用XRD、N2吸附脱附、IR、SEM、TEM等测试手段对合成样品进行分析表征,考察了主要合成条件对分子筛性能的影响.结果表明,合成过程中微孔与介孔结构之间会相互转化,样品中微孔与介孔特征峰存在此消彼长的关系.非临氢反应结果表明,复合分子筛具有较高的异构化选择性.     

载金微孔分子筛催化剂研究进展

长期以来金被认为是化学惰性的,虽然早期对它的催化活性有所研究,但直到20世纪80年代中期,才相继出现了两个突破性的进展:1985年,英国威尔士大学的Hutchings教授,发现Au-Pd催化剂能够催化乙炔氢氯化反应~([1]);日本首都东京大学的Haruta教授发现,负载型纳米金催化剂具有优异的低温催化CO氧化活性~([2]).之后纳米金催化剂吸引了众多学者的目光,它的应用范围也越来越广泛.研究表明,影响纳米金催化剂催化性能的因素主要有载体的种类和性质、纳米金粒子的尺寸(常小于10 nm)形貌、氧化状态等,如何制备较小纳米金颗粒以及控制其粒径长大是获得高活性高稳定性金催化剂的关键~([3～5]).     

微孔-介孔复合结构分子筛的研究新进展

微孔分子筛是现代石油工业中重要的择形催化剂,具有均匀发达的微孔结构、酸性强和水热稳定性好的特点,已在许多领域得到广泛应用.     

一种新的活性自由基聚合:单电子转移-活性自由基聚合

介绍了一种新的活性自由基聚合-单电子转移活性自由基聚合(SET-LRP)。SET-LRP的机理是基于Cu(I)在某些溶剂中的歧化反应和Cu(0)通过外层电子转移(OSET)使引发剂R-X生成自由基离子[R-X].-,自由基离子通过异裂生成自由基R.,从而引发单体进行聚合。讨论了引发剂、催化剂、溶剂和配体对SET-LRP的影响。通过与原子转移自由基聚合(ATRP)的对比,表明用于ATRP的引发剂也能广泛应用于SET-LRP,而用于SET-LRP的配体必须是能使络合物高度不稳定、能够使Cu(I)迅速发生歧化反应的配体;通过比较还显示出SET-LRP巨大的优越性:单体适应范围广、反应速率快、反应条件简单、催化剂容易脱除、反应产物没有颜色变化。总之,SET-LRP将有其广阔的应用前景。     

分子筛材料研究及其在催化裂化过程中的应用前景

对近年来新合成的分子筛材料,如超大微孔分子筛、介孔分子筛、含D4R结构单元的分子筛的孔结构及合成技术进行综述,并探讨了这些新分子筛材料在催化裂化过程中的应用前景。     

电子转移过程的理论——1992年诺贝尔化学奖

1992年10月14日瑞典皇家科学院宣布1992年诺贝尔化学奖授予美国加州理工学院Rudolph A. Marcus教授,以表彰1956—1965年期间他在“电子转移过程理论”方面所做出的重要贡献。电子转移过程可发生于众多的体系之中,如:在溶液中或在胶体中的有机化合物分子;在不同界面如金属/液体界面、半导体/液体以及液体/液体界面的电子转移过程,还有生命体系     

光诱导电子转移反应在有机合成中的应用

对近十年来报道的在有机合成中有重要意义的光诱导电子转移反应做了简要的总结. 包括六个部分: (1)光诱导电子转移(PET)反应的基本原理, (2) PET诱导的自由基离子裂解和去保护基反应, (3) PET诱导的加成和环加成反应, (4) PET诱导的环化反应和串联环化反应, (5)不对称PET反应, (6)微反应器中的PET反应.     

孔道型微孔和介孔分子筛的改性及超级绝热性能

在水热体系中合成了具有规则孔道结构的微孔分子筛ZSM-5和介孔分子筛MCM-41,SBA-15,MAS-5,通过改变材料表面的电性对介孔材料进行了化学修饰.采用X射线衍射(XRD)和扫描电子显微镜(SEM)对样品的结构、形貌进行了表征;通过氮气吸附-脱附测试了产物的比表面积,采用BJH法计算孔分布和孔容;将制得的样品压制成绝热材料后,进行导热性质测定.常温(25℃)常压下,有序介孔分子筛MCM-41的导热系数为0.038 W·m-1·K-1,具有少量微孔结构的MAS-5的导热系数为0.035W·m-1·K-1,二者均为超级绝热材料.材料经改性后,绝热性能有所提高:MCM-41的导热系数降至0.028 W·m-1·K-1,MAS-5的导热系数降至0.017 W·m-1·K-1.结合纳米介孔材料导热理论模型进行分析,发现纳米孔绝热材料的孔径越小,孔隙率越大,绝热性能好;介孔分子筛的导热系数与其孔壁厚度、孔径大小以及孔隙率有关.     

HY分子筛为模板合成的微孔炭及其电化学电容性能

以HY分子筛为模板, 采用糠醇浸渍炭化法和糠醇浸渍-乙腈气相沉积炭化法制备了多种微孔炭材料, 分别标记为PFA系列和AN系列, 并研究了其电化学电容性能. X射线衍射(XRD)测试表明AN系列炭材料较好地复制了HY分子筛模板的孔结构有序性. X射线光电子能谱仪(XPS)测试表明, 乙腈气相沉积在炭材料中引入丰富的含氮官能团. 氮气吸附测试表明, 炭材料是典型的微孔材料, 具有较高的比表面积, 较窄的孔径分布范围. 电化学测试表明, AN系列炭材料电容性能较好, 并具有明显的赝电容, 其中AN8的比电容最大可达210 F·g^-1. AN系列炭材料的电容保持率与材料的导电性和介孔率有关.     

Theoretical study on electron transfer in biological systems (III)

Iritramolwular electron transfer of nlctal-containing spiro π-electron system was studied by AM1 method in the MOPAC-ET program developed by the present group. The results indicated that with the increasing of the outer electric field F, the activation energy of the reaction decreased. When F reaches a certain threshold value, the activation energy barrirr becomcs zero and the rate of reaction achieves the largest value. The results also indicated that electron transfer matrix elements V_AB and reorganization energy λ were not obviously affected by outer electric field while the exothermicity ΔE was directly proportional to it.     

TTF-porphyrin dyads as novel photoinduced electron transfer systems

A TTF-linked porphyrin dyad and its zinc complex have been synthesized as novel photosystems with a redox-active pendant. The two chromophores of these dyads are not interactive in the absorption spectra, but the fluorescence of the porphyrin chromophore is dramatically quenched by intramolecular electron transfer from the TTF pendant.     

Unexpected electron transfer in cryptochrome identified by time-resolved EPR spectroscopy

Subtle differences in the local sequence and conformation of amino acids can result in diversity and specificity in electron transfer (ET) in proteins, despite structural conservation of the redox partners. For individual ET steps, distance is not necessarily the decisive parameter; orientation and solvent accessibility of the ET partners, and thus the stabilization of the charge-separated states, contribute substantially.     

生物体系中电子转移机理的研究Ⅱ: 分子间电子转移及 电子供、受体间不同基 团的影响

利用自编程序MOPAC-ET中AM1方法,及KT(Koopman'sTheorem)法,研究了二苯负离子体系的分子间电子转移现象,计算了其电子供、受体在不同距离下的V~A~B及它们之间的相关性,另外,还对两苯环间不同介入基团对电子转移的影响做了初步研究,发现不同的介入基团存在着较大的差异。     

Photoinduced electron transfer on aqueous carbon nanohorn-pyrene-tetrathiafulvalene architectures

Water-soluble carbon-nanohorn-tetrathiafulvalene (CNH-TTF) nanoensembles were prepared by utilizing positively charged pyrene as an assembly medium and characterized by spectroscopy and electron microscopy. Electronic interactions within the nanoensemble were probed by optical spectroscopy, indicating electron transfer between the TTF units and CNHs after light illumination.     

Internal reorganization energy in return electron transfer within geminate radical ion pairs

The internal reorganization energies λ_v for return electron transfer (ET) reactions within geminate radical ion pairs were studied using the extended Nelsen method. In the ET systems studied, the common acceptor was 9,10-dicyanoanthracene (DCA). The donors were methyl-substituted compounds of benzene, biphenyl, naphthalene and phenanthrene. The calculated results indicated that the λ_v values were associated mainly with the carbon atoms of the aromatic rings and the atoms linked directly to the aromatic rings. Systems with similar substituted conditions are expected to have similar internal reorganization energies. For systems in which the two aromatic rings of the donor can rotate relative to each other, the calculated λ_v values include a contribution from the change in torsional angle in the ET process. Compared with the system in which the donor is a fluorene molecule, the contributions of the torsional angles (low-frequency vibration) to λ_v were estimated.     

Spontaneous ionization of N-alkylphenothiazine molecules adsorbed in channel-type zeolites: effects of alkyl chain length and confinement on electron transfer

The mere mixing of N-alkylphenothiazines with three channel-type acid zeolites with various structures (ferrierite, H-MFI, and mordenite) induces the spontaneous ionization of the heterocyclic molecule in high yield upon adsorption. The diffuse reflectance UV-visible absorption and Raman scattering spectra show that the accessibility of the highly polarizing acid sites is not indispensable to induce the spontaneous ionization process. Due to their particularly low ionization potential values (6.7 eV), the adsorption of the molecules on the external surface or in the inner volume is the key parameter to generate the radical cation. However, the ionization yield and charge stabilization are intimately correlated to the possibility of the zeolites accommodating molecules inside their channels. Moreover, the higher electrostatic field gradient induced by high confinement is required to favor the second ionization and dication formation. The alkyl chain length plays a decisive role by either slowing down the diffusion process or blocking the molecule at the pore entry. Therefore, the efficiency of the ionization process that depends on the number of adsorbed molecules decreases significantly from phenothiazine to the N-alkylphenothiazines. The spectral data demonstrate that deformation of the alkyl group is necessary to allow the diffusion of the molecules into the channels.     

肽链体系中的长程电子转移: 酪氨酸与色氨酸间电子转移的理论研究

用电子转移的半经典模型和量子化学半经验方法对色氨酸-酪氨酸二肽体系进行电子转移动力学参数计算.用AM1方法分别优化给体、受体和桥体几何构型,用线性反应坐标的构造了给体和受体分子间电子转移的双势阱,得到两透热势能面交叉处的反应坐标为R=(约等于)0.10,并确定了反应的内重组能及反应热.对色氨酰酪氨酸和酪氨酰色氨酸体系进行闭壳层HF自洽场计算,按Koopmans定理计算体系分子轨道分裂能值A(三角形),在R约为0处发现了A(三角形)的极小值,从而获得色氨酰酪氨酸及酪氨酰色氨酸体系分子内电子转移的电子转移矩阵元V~D~A分别为0.96kJ.mol^-^1和0.87kJ.mol^-^1.采用Marcus双球模型估算反应的溶剂重组能为64.60kJ.mol^-^1。     

Synthesis of amphiphilic ABC triblock copolymers by single electron transfer nitroxide radical coupling reaction in tetrahydrofuran

A series of ABC triblock copolymers, that is, polyisoprene‐block‐polystyrene‐block‐poly(ethylene oxide) (PI‐PS‐PEO), PI‐block‐poly(tert‐butyl acrylate)‐block‐PEO (PI‐PtBA‐PEO), and PI‐block‐poly(acrylic acide)‐block‐PEO (PI‐PAA‐PEO) were obtained by combination of anionic technique, atom transfer radical polymerization (ATRP), and single electron transfer nitroxide coupling (SETNRC) reaction. Anionic polymerization of isoprene followed by end capping with ethylene oxide yielded hydroxyl‐terminated PI. After esterification, PI with Br end group was used as a macroinitiator to initiate the polymerization of styrene and tBA by ATRP that was then trapped by 2,2,6,6‐tetramethylpiperidine‐1‐oxyl (TEMPO) group in PEO by SETNRC reaction rapidly with high efficiency in tetrahydrofuran at room temperature. The effect of reaction time and polymer chain length on SETNRC reaction was discussed in detail. In the presence of Cu⁰/tris[2‐(dimethylamino)ethyl]amine, SETNRC between PI‐PS‐Br and PEO‐TEMPO was carried out with the efficiency of up to 91.6% in 2 h. With the increase in polymer chain length, the efficiency decreased fleetly. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011