The Radial Distribution of Ions and Electrons in RF Inductively Coupled H<Subscript>2</Subscript>/T<Subscript>2</Subscript>B Plasmas

A glow discharge polymer (GDP) was fabricated using trans-2-butene (T₂B) and hydrogen (H₂) via a plasma-enhanced chemical vapor deposition (PECVD) system. The uniformity of the GDP films was significantly affected by the radial distribution of the H₂/T₂B plasma parameters. The plasma properties while discharging by a multi-carbon gas source of mixed H₂/T₂B were investigated during the GDP deposition process. The main positive ions and ion energy distributions in inductively coupled H₂/T₂B plasmas were analyzed by energy-resolved mass spectrometer (MS), and the electron density and the effective electron temperature were mainly analyzed using a Langmuir probe. The MS results show that the main positive ions in the plasmas are \({\text{C}}_{ 2} {\text{H}}_{ 4}^{ + }\), \({\text{C}}_{ 2} {\text{H}}_{ 6}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 3}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 6}^{ + }\), \({\text{C}}_{ 3} {\text{H}}_{ 8}^{ + }\), \({\text{C}}_{ 4} {\text{H}}_{ 5}^{ + }\), \({\text{C}}_{ 4} {\text{H}}_{ 1 0}^{ + }\), \({\text{C}}_{ 5} {\text{H}}_{ 5}^{ + }\), and \({\text{C}}_{ 5} {\text{H}}_{ 7}^{ + }\) with mass-to-charge ratios (m/e) of 28, 30, 39, 42, 44, 53, 58, 65, and 67, respectively. For a normalized ion intensity, the relative intensities of saturated CH ions increase with increasing radial distance, while the unsaturated CH ions decrease with increasing radial distance. The ion energy distribution of \({\text{C}}_{ 2} {\text{H}}_{ 6}^{ + }\) (m/e = 30) presents a bimodal structure. Additionally, both the electron density and the effective electron temperature decrease with increasing radial distance.     

Heteroatomic derivatives of aziridine

The reaction of ethyleneimine with sulfenyl chlorides RSCl at –10 C in the presence of a hydrogen chloride acceptor (triethylamine) leads to the formation of N-organylthioaziridines . Compounds with R=n-C₅H₁₁, C₆H₅, o-O₂NC₆H₄ and C₆H₆CH₂ have been obtained by this method. and . have been synthesized analogously.The properties and IR spectra of these compounds have been studied. The action of methyl iodide on N-phenylthioaziridine leads to disproportionation of the molecule with the formation of diphenyl disulfide, -iodoethyltrimethylammonium iodide, and free iodine.For communication VI, see [I].     

Hierarchical enumeration of Kekulé’s benzenes,Ladenburg’s benzenes,Dewar’s benzenes,and benzvalenes by using combined-permutation representations

The group hierarchy for each skeleton of ligancy 6 is formulated to be: point group (PG \({\varvec{G}}_{\sigma }\)) \(\subseteq \) RS-stereoisomeric group (RS-SIG \({\varvec{G}}_{\sigma \widetilde{\sigma }\widehat{I}}\)) \(\subseteq \) stereoisomeric group (SIG \(\widetilde{{\varvec{G}}}_{\sigma \widetilde{\sigma }\widehat{I}}\)) \(\subseteq \) isoskeletomeric group (ISG \(\widetilde{\widetilde{{\varvec{G}}}}_{\sigma \widetilde{\sigma }\widehat{I}}\) = \({\varvec{S}}^{[6]}_{\sigma \widehat{I}}\)), where we start from the PG \({\varvec{G}}_{\sigma }\) = \({\varvec{D}}_{6h}\) for the Kekulé benzene skeleton, from the PG \({\varvec{G}}_{\sigma }\) = \({\varvec{D}}_{3h}\) for the Ladenburg benzene skeleton, from the PG \({\varvec{G}}_{\sigma }\) = \({\varvec{C}}_{2v}\) for the Dewar benzene skeleton, or from the PG \({\varvec{G}}_{\sigma }\) = \({\varvec{C}}_{2v}\) for the benzvalene skeleton. After these groups are constructed as combined-permutation representations, the calculation of the respective cycle indices with chirality fittingness (CI-CFs) and the introduction of ligand-inventory functions are conducted to give generation functions for 3D-based enumerations (for PGs and RS-SIGs) and 2D-based enumerations (for SIGs and ISGs). The enumeration results are discussed by means of isomer-classification diagrams, in which equivalence classes under enantiomerism (for PGs), RS-stereoisomerism (for RS-SIGs), stereoisomerism (for SIGs), and isoskeletomerism (for ISGs) are illustrated schematically. The implicit connotations of the conventional terms “skeletal isomerism”, “positional isomerism”, and “constitutional isomerism” are discussed, where the effects of the concept of isoskeletomerism are emphasized.     

Redox behavior of $${\text{VO}}^{2 + } / {\text{VO}}_{2}^{ + }$$ as a simulant of $${\text{NpO}}_{2}^{ + } / {\text{NpO}}_{2}^{2 + }$$NpO2+/NpO22+ in boiling nitric acid solution

To evaluate the redox behavior of \({\text{VO}}^{2 + } / {\text{VO}}_{2}^{ + }\) as a simulant of \({\text{NpO}}_{2}^{ + } / {\text{NpO}}_{2}^{2 + }\) in boiling nitric acid solution, i.e., typical operating conditions for nuclear fuel reprocessing plants, oxidation rate measurements for VO²⁺ in boiling and non-boiling nitric acid solutions, thermodynamic calculations, and kinetic calculations were performed. The results indicated that the apparent oxidation rate of VO²⁺ to \({\text{VO}}_{2}^{ + }\) is accelerated by a decrease in \({\text{NO}}_{2}^{ - }\) and HNO₂ concentrations owing to the boiling phenomena of nitric acid solution.     

Vibratio nal assig nme nts,co nformatio nal a nalysis,a nd molecular structures of $$\left[ {\text{C}_{\text{ n}} \text{mim}} \right]\left[ {\text{NTF}_{\text{2}} } \right]$$C nmimNTF2 ( n = 2, 4, 6, a nd 8) imidazolium-based io nic liquids: a combi ned experime ntal a nd qua ntum chemical approach

This work is aimed at providing physical insights about the interactions of cations, anion, and ion pairs of four imidazolium-based ionic liquids of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) with varying alkyl chain lengths (n = 2, 4, 6, and 8) using both DFT calculations and vibrational spectroscopic measurements (IR absorption and Raman scattering) in the mid- and far regions. The calculated Mulliken charge distributions of \(\left[ {{\text{C}}_{\text{n}} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) ion pairs indicate that hydrogen-bonding interactions between oxygen and nitrogen atoms (more negative charge) on \(\left[ {{\text{NTF}}_{2} } \right]^{ - }\) anion and the hydrogen atoms (more positive charge) on the imidazolium ring play a dominating role in the formation of ion pair. Thirteen stable conformers of \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) were optimized. According to our results, the strongest and weakest hydrogen bonds were existing in \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), respectively. A redshift of 290, 262, 258, and 257 cm^?1 has been observed for cations involving \(\left[ {{\text{C}}_{2} {\text{mim}}} \right]^{ + }\), \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]^{ + }\),\(\left[ {{\text{C}}_{6} {\text{mim}}} \right]^{ + }\), and stretching vibrations of \({\text{C}}12{-}{\text{H}}3\), respectively. By increasing the chain length, the strength of hydrogen bonds decreases as a result of \({\text{C}}12{-}{\text{H}}3\) bond elongation and less changes are observed in stretching vibrations of \({\text{C}}12{-}{\text{H}}3\) compared to the free cations. To the best of our knowledge, this research is the first work which reports the far-IR of \(\left[ {{\text{C}}_{4} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), \(\left[ {{\text{C}}_{6} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\), and \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\) and the mid-IR of \(\left[ {{\text{C}}_{8} {\text{mim}}} \right]\left[ {{\text{NTF}}_{2} } \right]\).     

Thermochemical Properties of Dissolution of Nicotinic Acid C<Subscript>6</Subscript>H<Subscript>5</Subscript>NO<Subscript>2</Subscript>(s) in Aqueous Solution

Nicotinic acid (also known as niacin) was recrystallized from anhydrous ethanol. X-ray crystallography was applied to characterize its crystal structure. The crystal belongs to the monoclinic system, space group P2₍₁₎/c. The crystal cell parameters are a = 0.71401(4) nm, b = 1.16195(7) nm, c = 0.71974(6) nm, α = 90°, β = 113.514(3)°, γ = 90° and Z = 4. Molar enthalpies of dissolution of the compound, at different molalities m/(mol·kg^?1) were measured with an isoperibol solution–reaction calorimeter at T = 298.15 K. The molar enthalpy of solution at infinite dilution was calculated, according to Pitzer’s electrolyte solution model and found to be \( \Delta_{\text{sol}} H_{m}^{\infty } = ( 2 7. 3 \pm 0. 2) \) kJ·mol^?1 and Pitzer’s parameters (\( \beta_{{\text{MX}}}^{{\text{(0)}L}} \), \( \beta_{{\text{MX}}}^{{\text{(1)}L}} \) and \( C_{{\text{MX}}}^{\phi L} \)) were obtained. The values of apparent relative molar enthalpies (\( {}^{\phi }L \)) and relative partial molar enthalpies (\( \overline{{L_{2} }} \) and \( \overline{{L_{1} }} \)) of the solute and the solvent at different molalities were derived from the experimental enthalpy of dissolution values of the compound. Also, the standard molar enthalpy of formation of the anion \( {\text{C}}_{ 6} {\text{H}}_{ 4} \text{NO}_{2}^{-} \) in aqueous solution was calculated to be \( {\Delta_{\text{f}}^{} H}_{\text{m}}^{\text{o}} ({\text{C}}_{ 6} {\text{H}}_{ 4} {\text{NO}}_{2}^{-} \text{,aq}) = - \left( {603.2 \pm 1.2} \right)\;{\text{kJ}}{\cdot}{\text{mol}}^{-1} \).     

Porous electrospun nanocomposite mats based on chitosan–cellulose nanocrystals for wound dressing: effect of surface characteristics of nanocrystals

Randomly oriented fiber mats of chitosan–polyethylene oxide matrix reinforced with cellulose nanocrystals (CNCs) were prepared by electrospinning technique. The cellulose nanocrystals used were isolated using hydrochloric acid (CNC_HCl) or sulphuric acid (\({\text{CNC}}_{{{\text{H}}_{ 2} {\text{SO}}_{ 4} }}\)) and the concentration of CNCs was 50 wt% in the electrospun mats. The surface characteristics of the nanocrystals were found to affect the dispersion, viscosity, conductivity and zeta-potential of the respective spinning solutions and resulted in better spinnability, homogeneity as well as crosslinking of CNC_HCl based nanocomposite fiber mats compared to \({\text{CNC}}_{{{\text{H}}_{ 2} {\text{SO}}_{ 4} }}\) ones. The microscopy studies showed that the diameter of the electrospun fibers decreased with the inclusion of both types of nanocrystals and that crosslinking decreased the porosity of the mats. The tensile strength and tensile modulus of the mats increased with the addition of nanocrystals and increased further for the CNC_HCl based mats (58 MPa, 3.1 GPa) after crosslinking. The as-spun CNC_HCl based mats had average pore diameters of 1.6 μm and porosity of 38 %. The water vapor permeability and the O₂/CO₂ transmission increased with the addition of CNC_HCl. The used nanocrystals as well as electrospun mats showed non-cytotoxic impact on adipose derived stem cells (ASCs), which was considered favorable for wound dressing.     

Fluidized-bed Fenton-like oxidation of a textile dye using natural magnetite

Degradation of Acid Orange 7 (AO7) as a model azo dye was investigated in a recirculating pilot fluidized-bed reactor by a Fenton-like process using natural magnetite (NM) and potassium persulfate (K₂S₂O₈). Scanning electron microscopy was performed to characterize the magnetite sample. The heterogeneous Fenton-like process (NM/\({\text{S}}_{2} {\text{O}}_{8}^{2 - }\)) is a modified method owing to its enhanced mass transfer. It can be operated reliably and simply by reducing the produced iron oxide sludge in the conventional Fenton process. Degradation efficiency (DE %) of AO7 by NM/ \({\text{S}}_{2} {\text{O}}_{8}^{2 - }\) process was affected by operational parameters. The DE % of 75 % was obtained for the AO7 treatment (15 mg/L) at the desired conditions, such as pH 5, 0.2 mM \({\text{S}}_{2} {\text{O}}_{8}^{2 - }\), and 0.5 g/L NM after 120 min of reaction time. The dye degradation rate in all the experiments followed the pseudo-second-order kinetic with high correlation coefficients (R ² ≥ 0.98). The low released iron concentration, successive reusability at milder pH and the recirculation mode with the proper mixing are the significant advantages of the NM/\({\text{S}}_{2} {\text{O}}_{8}^{2 - }\) process.     

Analysis on the removal of ammonia nitrogen using peroxymonosulfate activated by nanoparticulate zero-valent iron

Nanoparticulate zero-valent iron (Fe⁰) was used to activate peroxymonosulfate (PMS) to remove low concentration of ammonia nitrogen in the aqueous system. The removal process was investigated under various conditions. It was indicated that the removal of \({\text{NH}}_{4}^{ + }\) followed the pseudo-first-order kinetic model for the initial reactions. The removal rate increased with the ascending of pH and Fe⁰ dosage, while declined with the ascent of initial \({\text{NH}}_{4}^{ + }\) concentration. The existence of nitrogenous compounds would inhibit the reactions, especially for the compounds with carboxyl structure functional groups. The identification of free radical proved that \(\cdot {\text{SO}}_{4}^{ - }\) is the main radical in Fe⁰/PMS for the removal of ammonia nitrogen. The inorganic products including \({\text{NO}}_{2}^{ - }\), \({\text{NO}}_{3}^{ - }\), Fe²⁺ and Fe³⁺ were detected with the detailed mechanism proposed. The results demonstrated that Fe⁰/PMS process was more effective on ammonia removal compared to single Fe⁰, Fe⁰/persulfate and Fe⁰/H₂O₂. This study proposed a cost-effective process for \({\text{NH}}_{4}^{ + }\) removal at very low concentration of sulfate radicals.     

Comparing the photocatalytic activity of N-doped and S-doped titanium dioxide nanoparticles for water splitting under sunlight radiation

The objective of this research is to compare the photocatalytic activity of nanoparticles of N-doped and S-doped titanium dioxide in water splitting by using sunlight radiation for hydrogen production. The sol–gel method was used for the preparation of nanoparticles of doped TiO₂ and the weight percent of doping element was 2, 4, 6 and 8. The prepared nanoparticles were identified by absorbance spectra of UV–Vis and FT-IR, TGA, XRD patterns, FE-SEM images and EDX spectra. The nanoparticles of S–\({\text{TiO}}_{2}\) indicated the lower band gap and lesser particle size versus N–\({\text{TiO}}_{2}\) nanoparticles. Nevertheless, the nanoparticles of N–\({\text{TiO}}_{2}\) showed the higher photocatalytic activity in hydrogen production process. The activity of doped samples with sulfur (S–\({\text{TiO}}_{2}\)) was reduced by the presence of sulfate anions, and the absorption of radiation in the samples surface was due to a decrease in the number of electron–hole pair in photocatalyst. The photocatalytic activity of N–\({\text{TiO}}_{2}\) was also increased with the increasing in weight fraction of N atoms, and the highest hydrogen production was obtained in 6 wt% of nitrogen.     

Solvent extraction of calcium and strontium into nitrobenzene by using synergistic mixture of hydrogen dicarbollylcobaltate and diphenyl-<Emphasis Type="Italic">N</Emphasis>-butylcarbamoylmethyl phosphine oxide

Extraction of microamounts of calcium and strontium by a nitrobenzene solution of hydrogen dicarbollylcobaltate (H⁺B^?) in the presence of diphenyl-N-butylcarbamoylmethyl phosphine oxide (DPBCMPO, L) has been investigated. The equilibrium data have been explained assuming that the species HL⁺, \( {\text{HL}}_{2}^{ + } \), \( {\text{ML}}_{2}^{2 + } \), \( {\text{ML}}_{3}^{2 + } \) and \( {\text{ML}}_{4}^{2 + } \) (M²⁺ = Ca²⁺, Sr²⁺) are extracted into the organic phase. The values of extraction and stability constants of the cationic complexes in nitrobenzene saturated with water have been determined. In the considered nitrobenzene medium, it was found that the stability of the \( {\text{SrL}}_{2,{\text{org}}}^{2 + } \) complex is somewhat higher than that of species \( {\text{CaL}}_{2,{\text{org}}}^{2 + } \), while the stability constants of the remaining strontium complexes \( {\text{SrL}}_{3,{\text{org}}}^{2 + } \) and \( {\text{SrL}}_{4,{\text{org}}}^{2 + } \) are smaller than those of the corresponding complex species \( {\text{CaL}}_{n}^{2 + } \) (n = 3, 4).     

Densities,Ultrasonic Velocities,Excess Properties and IR Spectra of Binary Liquid Mixtures of Organic Esters (Ethyl Lactate,Some Organic Carbonates)

Organic esters of carbonic acid {dimethyl carbonate (DMC)/diethyl carbonate (DEC)/propylene carbonate (PC)}, in combination with a lactate ester {ethyl lactate (EL)}, with green chemistry characteristics were chosen for the present study of molecular interactions in binary liquid mixtures. Densities (ρ) and ultrasonic velocities (U) of the pure solvents and liquid mixtures were measured experimentally over the entire composition range at temperatures (303.15, 308.15, 313.15 and 318.15) K and atmospheric pressure. The experimental data was used to calculate thermodynamic and acoustic parameters \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \), \( L_{\text{f}}^{\text{E}} \), \( \bar{V}_{\text{m,1}}^{{}} \), \( \bar{V}_{\text{m,2}}^{{}} \), \( \bar{V}_{\text{m,1}}^{\text{E}} \), \( \bar{V}_{\text{m,2}}^{\text{E}} \), \( \bar{V}_{ 1}^{\text{E,0}} \) and \( \bar{V}_{ 2}^{\text{E,0}} \) and the excess functions were fitted with the Redlich–Kister polynomial equation to obtain the binary solution coefficients and the standard deviations. It was observed that the values of \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \) and \( L_{\text{f}}^{\text{E}} \) are positive for the mixtures of (EL + DMC/DEC) and negative for those of (EL + PC) over the entire range of composition and temperature. The positive values of \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \) and \( L_{\text{f}}^{\text{E}} \) indicate the action of dispersion forces between the component molecules of (EL + DMC/DEC) mixtures whereas negative values for the mixture (EL + PC) suggest the existence of strong specific interactions between the component molecules, probably resulting from chemical and structural contributions. The excess properties have also been analyzed by using the reduced (\( Y^{\text{E}} /x_{1} x_{2} \)) excess function approach and the results are found to be in agreement with those from the corresponding \( Y^{\text{E}} \)(= \( V_{\text{m}}^{\text{E}} \), \( \kappa_{S}^{\text{E}} \) and \( L_{\text{f}}^{\text{E}} \)) values. This is further supported by FTIR spectral analysis.     

Thermodynamic Properties of Ternary Ionic Liquid Mixture Containing a Common Ion: Excess Molar Volumes,Excess Isentropic Compressibilities,Excess Molar Enthalpies and Excess Heat Capacities

In the present investigations, the excess molar volumes, \( V_{ijk}^{\text{E}} \), excess isentropic compressibilities, \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), and excess heat capacities, \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \), for ternary 1-butyl-2,3-dimethylimidazolium tetrafluoroborate (i) + 1-butyl-3-methylimidazolium tetrafluoroborate (j) + 1-ethyl-3-methylimidazolium tetrafluoroborate (k) mixture at (293.15, 298.15, 303.15 and 308.15) K and excess molar enthalpies, \( \left( {H^{\text{E}} } \right)_{ijk} \), of the same mixture at 298.15 K have been determined over entire composition range of x _i and x _j . Satisfactorily corrections for the excess properties \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) have been obtained by fitting with the Redlich–Kister equation, and ternary adjustable parameters along with standard errors have also been estimated. The \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) data have been further analyzed in terms of Graph Theory that deals with the topology of the molecules. It has also been observed that Graph Theory describes well \( V_{ijk}^{\text{E}} \), \( \left( {\kappa_{S}^{\text{E}} } \right)_{ijk} \), \( \left( {H^{\text{E}} } \right)_{ijk} \) and \( \left( {C_{p}^{\text{E}} } \right)_{ijk} \) values of the ternary mixture comprised of ionic liquids.     

Imidazolium-Based Ionic Liquids Containing the Trifluoroacetate Anion: Thermodynamic Study

New experimental vapor pressures and vaporization enthalpies of the ionic liquids \( [ {\text{C}}_{2} {\text{mim][CF}}_{3} {\text{CO}}_{2} ] \) and \( [ {\text{C}}_{4} {\text{mim][CF}}_{3} {\text{CO}}_{2} ] \) have been measured by the QCM method. The solution enthalpies of these ionic liquids were measured by using high-precision solution calorimetry and were used for calculation the aqueous enthalpy of formation \( \Delta_{\text{f}} H_{\text{m}}^{ \circ } ({\text{CF}}_{ 3} {\text{CO}}_{2}^{ - } ,_{{}} {\text{aq}}) \) of the anion for combination with quantum-chemical results. The solubility parameters of the ILs under study have been derived from experimental \( \Delta_{\text{l}}^{\text{g}} H_{\text{m}}^{ \circ } \)(298.15 K) values and were used for estimation of miscibility of some common solutes with \( [ {\text{C}}_{n} {\text{mim][CF}}_{3} {\text{CO}}_{2} ] \).     

Thermo Physical and Spectroscopic Properties of Binary Liquid Systems: Ethanoic Acid/Propanoic Acid/Butanoic Acid with 2-Methylaniline

Densities (ρ), speeds of sound (u), and viscosities (η) are reported for binary mixtures of 2-methylaniline with carboxylic acids (ethanoic acid, propanoic acid and butanoic acid) over the entire composition range of mole fraction at T?=?(303.15–318.15) K and at atmospheric pressure (0.1 MPa). The excess properties such as excess molar volume (V _m ^E ), excess isentropic compressibility (κ _S ^E ) and excess Gibbs energy of activation of viscous flow (G^*E) are calculated from the experimental densities, speeds of sound and viscosities. Excess properties are correlated using the Redlich–Kister polynomial equation. The partial molar volumes, \( \bar{V}_{\text{m,1}} \) and \( \bar{V}_{\text{m,2}} \), partial molar isentropic compressibilities, \( \bar{K}_{\text{s,m,1}} \) and \( \bar{K}_{\text{s,m,2}} \), excess partial molar volumes, \( \bar{V}_{\text{m,1}}^{\text{E}} \) and \( \bar{V}_{\text{m,2}}^{\text{E}} \), and excess partial molar isentropic compressibilities, \( \bar{K}_{\text{s,m,1}}^{\text{E}} \) and \( \bar{K}_{\text{s,m,2}}^{\text{E}} \), over whole composition range, partial molar volumes, \( \bar{V}_{\text{m,1}}^{ \circ } \) and \( \bar{V}_{\text{m,2}}^{ \circ } \), partial molar isentropic compressibilities, \( \bar{K}_{\text{s,m,1}}^{ \circ } \) and \( \bar{K}_{\text{s,m,2}}^{ \circ } \), excess partial molar volumes, \( \bar{V}_{\text{m,1}}^{{ \circ {\text{E}}}} \) and \( \bar{V}_{{{\text{m}},2}}^{{ \circ {\text{E}}}} \), and excess partial molar isentropic compressibilities, \( \bar{K}_{\text{s,m,1}}^{{ \circ {\text{E}}}} \) and \( \bar{K}_{\text{s,m,2}}^{{ \circ {\text{E}}}} \), of the components at infinite dilution have also been calculated from the analytically obtained Redlich–Kister polynomials. The excess molar volume V^E results are analyzed using the Prigogine–Flory–Patterson theory. Analysis of each of the three contributions viz. interactional V^E(int.), free volume V^E(fv.) and characteristic pressure p* to V^E showed that the interactional contributions are positive for all systems while the free volume and characteristic pressure p* contributions are negative for all the binary mixtures. The results are analyzed in terms of attractive forces between 2-methylaniline and carboxylic acids molecules. Good agreement is obtained between excess quantities and spectroscopic data.     

Additional Aspects of Complexation of Gold(I) with Thiomalate

Some equilibria involving gold(I) thiomalate (mercaptosuccinate, TM) complexes have been studied in the aqueous solution at 25 °C and I?=?0.2 mol·L^?1 (NaCl). In the acidic region, the oxidation of TM by \( {\text{AuCl}}_{4}^{ - } \) proceeds with the formation of sulfinic acid, and gold(III) is reduced to gold(I). The interaction of gold(I) with TM at n_TM/n_Au?≤?1 leads to the formation of highly stable cyclic polymeric complexes \( {\text{Au}}_{m} \left( {\text{TM}} \right)_{m}^{*} \) with various degrees of protonation depending on pH. In general, the results agree with the tetrameric form of this complex proposed in the literature. At n_TM/n_Au?>?1, the processes of opening the cyclic structure, depolymerization and the formation of \( {\text{Au}}\left( {\text{TM}} \right)_{2}^{*} \) occur: \( {\text{Au}}_{4} ( {\text{TM)}}_{4}^{8 - } + {\text{TM}}^{3 - } \rightleftharpoons {\text{Au}}_{ 4} ( {\text{TM)}}_{5}^{11 - } \), log₁₀ K₄₅?=?10.1?±?0.5; 0.25 \( {\text{Au}}_{4} ( {\text{TM)}}_{4}^{8 - } + {\text{TM}}^{3 - } \rightleftharpoons {\text{Au(TM)}}_{2}^{5 - } \), log₁₀ K₁₂?=?4.9?±?0.2. The standard potential of \( {\text{Au(TM)}}_{2}^{5 - } \) is \( E_{1/0}^{ \circ } = -0. 2 5 5\pm 0.0 30{\text{ V}} \). The numerous protonation processes of complexes at pH?<?7 were described with the use of effective functions.     

Inclusion complexes of $$\hbox{cholesteryl-(}\varepsilon\hbox{-caprolactone})_{\overline{10}}$$ functionalized polymer with γ-cyclodextrin

An inclusion complex (IC) of γ-cyclodextrin with biodegradable \(\hbox{cholesteryl-(}\varepsilon\hbox{-caprolactone})_{\overline{10}}\) \(\hbox{(Chol-(CL)}_{\overline{10}})\) functionalized polymer was prepared by using a general method of mixing solution. The formation of \(\gamma \hbox{-CD-Chol-(CL)}_{\overline{10}}\) IC was determined by Fourier transform infrared (FTIR),¹H-NMR, differential scanning calorimetry (DSC), and wide angle X-ray diffraction (WAXD), respectively. The results indicated that the \(\hbox{oligo}(\varepsilon\hbox{-CL})_{\overline{10}}\) blocks as well as the end cholesteryl moiety of the functionalized polymer were included and covered by γ-CD in a single-stranded mode in the \(\gamma \hbox{-CD-Chol-(CL)}_{\overline{10}}\) ICs. Moreover, the \(\gamma \hbox{-CD-Chol-(CL)}_{\overline{10}}\) ICs had a channel-type crystalline structure similar to that formed between the poly(propylene glycol) (PPG) and γ-CD. Finally, TGA revealed that the ICs had better thermal stability than their free components due to the inclusion complexation.     

Densities and Speeds of Sound of Binary Liquid Mixtures of 1,4-Butanediol with 2-Methoxyethanol and 2-Propoxyethanol at <Emphasis Type="Italic">T</Emphasis> = (303.15, 308.15, 313.15 and 318.15) K

Densities, ρ, and speeds of sound, u, for the binary liquid mixtures of 1,4-butanediol (1,4-BD) + 2-alkoxyethanols {2-methoxyethanol (2-ME), or 2-propoxyethanol (2-PE)} over the whole composition range have been measured at T = (303.15, 308.15, 313.15 and 318.15) K, and at atmospheric pressure (p = 0.1 kPa). Experimental data for the densities and speeds of sound have been used to derive the quantities like excess molar volume, \( V_{\text{m}}^{\text{E}} \), excess isentropic compressibility, \( \kappa_{S}^{\text{E}} \), excess molar isentropic compressibility, \( K_{{S,{\text{m}}}}^{\text{E}} \), excess speed of sound, \( u^{\text{E}} \), and excess isobaric thermal expansion \( \alpha_{p}^{\text{E}} \). These excess parameters were correlated by Redlich–Kister polynomials. Excess partial molar volumes (\( \bar{V}_{\text{m,1}}^{\text{E}} \) and \( \bar{V}_{\text{m,2}}^{\text{E}} \)) and their limiting values at infinite dilution (\( \bar{V}_{\text{m,1}}^{{ 0 {\text{E}}}} \) and \( {\bar{\text{V}}}_{\text{m,2}}^{{ 0 {\text{E}}}} \)) have been calculated from the experimental density measurements and were analytically obtained using the Redlich–Kister polynomials. The results are discussed in terms of intermolecular interactions and their dependence on composition and temperature.     

Solubility constants and free enthalpies of metal sulphides,part 6: A new solubility cell

A solubility cell which can be operated continuously over the temperature range 5–95 °C has been developed. The solubility of Fe_0.88S (monoclinic pyrrhotite) in solutions $$S_0 = ([H^ + ]) = H{\text{ }}m,{\text{ }}[Na^ + ] = (1.00---H) m,{\text{ }}[ClO_{4^ - } ] = 1.00 m)$$ at fixed partial pressures of H₂S has been investigated at 50.7 °C. The hydrogen ion concentration and the total concentration of iron(II) ion in equilibrium with the solid phase was determined by e.m.f. and analytical methods respectively. The data were consistent with $$\log ^* K_{pso} = \log \frac{{[Fe^{2 + } ]pH_2 S}}{{[H^ + ]^2 }} = 3.80 \pm {\text{ }}0.10{\text{ }}[50.7^\circ C,{\text{ }}1 m(Na)ClO_4 ]$$ according to the overall reaction $$1.14{\text{ }}Fe_{0.88} S_{(s)} {\text{ }} + {\text{ }}2H_{(I = 1m)}^ + {\text{ }} \rightleftharpoons {\text{ }}Fe_{(I = 1m)}^{2 + } {\text{ }} + {\text{ H}}_{\text{2}} S_{(g)} {\text{ }} + {\text{ }}0.14{\text{ }}S_{(s)} $$