Synthesis and Magnetic Properties of Fe（Ⅱ） and Nd（Ⅲ） Complexes of Poly（N-2-thiazolylacrylamide）

N-2-Thiazolylacrylamide （NTA） was polymerized by a radical route to obtain the polymer in good yield. The polymer with a pendent heterocyclic group is soluble in common organic solvents, which allow to prepare the corresponding metal complexes with higher loads easily. FTIR, ^1H NMR, elemental analysis, and energy-dispersive X-Ray spectroscopy （EDX） were applied to characterize these materials. The magnetic behavior of Fe（Ⅱ） and Nd（Ⅲ） complexes of poly（N-2-thiazolylacrylamide） was examined by a PPMS-9T magnetometer, exhibiting the characteristics of a soft ferromagnet. It is found that the Nd（Ⅲ） complex has an extremely high relative saturation magnetization of 35 emu/g.     

Synthesis and Characterization of Ion-exchange Sulfonated Poly （ether sulfone）

N,N'-Bis(3-hydroxyphenyl)-1,8,4,5-naphthalenetetracarboxylic bisimide was prepared from the reaction of 1,8,4,5-naphthalenetetrcarboxylic acid dianhydride and 2-aminophenol in N, N-dimethylformamide. Polymerization of this bisimide with 4,4'-difluorodiphenylsulfone and disodium 3,3'-disulfonate4,4'-difluorodiphenylsulfone gave ion-exchange sulfonated poly(ether sulfone). The structure of the title compound was characterized with 1H-NMR and its polymer was characterized with FT-IR.     

Synthesis and characterization of biodegradable polymer： Poly （ethene maleic acid ester-co-D,L-lactide acid）

A novel biodegradable polymer--poly （ethene maleic acid ester-co-D,L-lactide acid） was synthesized by copolymerizing lactide and prepolymer, which was prepared by the condensation of maleic anhydride and glycol, using p-toluene sulphonic acid as a catalyst, attempting to improve the hydrophilicity, increase flexibility and modulate the degradation rate. FTIR,^1H NMR, MALLS and DSC were employed to characterize these polymers.     

Synthesis and Crystal Structure of a New Diamine Complex CuC14（H2tn）

In an attempt to synthesize a new pyrimidine complex of copper(H) in a solution reaction of CuBr2 with 2,2‘-bis(hexahydropydmidine) and hydro-chloric acid, we unexpectedly obtained a bright yellow chip-like crystal of CuCl4(H2tn) [H2tn=(H3NCH2CH2CH2NH3)^2 ]. Its structure was determined by single-crystal X-ray diffraction analysis. The crystal belongs to orthorhombic system, space group Pnma, with cell parameters: a=0.7216(2)nm, b=1.8308(6)nm, c=0.7553(3)nm, V=0.9953(6)nm^3, Z=4, F(000)=564, Mr=281.49, Dc=1.879 g/cm^3. u(Mo Ka)=3.204 mm^-1, R1=0.0248, wR2=0.0575. The analysis of the crystal structure indicates that the complex has a three-dimensional network structure, which is formed by hydrogen bonds and electrostatic interaction.     

Synthesis of Hydrophobically Modified Poly（acrylic acid） gels and Interaction of the gels with Cationic／Anionic Surfactants

Poly(acrylic acid)(PAA) gel network with only chemical crosslinking and hydorophobically modified PAA(HM-PAA)gels with both chemical and physical crosslinking were synthesized by radical polymerization in tert-butanol,using ethylene glycol dimethacrylate (EGDMA) as crossliker,and 2-(N-ethylperfluorooctanesulfoamido)ethyl methacrylate (FMA),stearyl acrylate (SA) or lauryl acrylate (LA) as Hydrophobic comonomer respectively.The effcet of the fractions and the species of the hydrophobes on swelling properties of HM-PAA gels and the interaction of gels and surfactants were studied.The results showed that the swelling ratio of HM-PAA gels exhibited a sharp decrease with increasing hydrophobic comomomer comcentration,Which Could be sacribed to the formation of strong hydrophobic association among hydrophobic groups.It was proved that two kinds of binding mechanisms of surfactan/gel and different kinds of hydrophobic clusters existed in gels containing both physical and chemical networks.     

Aliphatic Hyperbranched Poly（amido amine）s （PAMAMs） ： Preparation and Modification

A series of water soluble aliphatic hyperbranched poly(amido amine)s(PAMAMs) with the same or similar chemical structure of poly(amido amine) dendrimer was successfully synthesized from commercially available AB and Cn types of monomers by one-pot polymerization via the couple-monomer methodology(CMM). The AB type monomer used in this paper was methyl acrylate, and Cn monomers were multi-amino compounds such as ethylenediamine (EDA), diethylenetriamine (DETA), triethylenetetraamine (TETA). tetraethylenepentaamine (TEPA) and pentaethylenehexamine (PEHA). The reaction mechanism was investigated by means of the mass spectra of the reaction intermediates. Adjusting the feed ratio of AB to Cn. hyperbranched polymers with different terminal groups and properties were obtained. FTIR, NMR, DSC. and TGA were used to characterize the polymers. It was found that the polymers‘ properties such as solubility, thermal behaviour and encapsulation capability varied with changing the feed ratio of AB to Cn. Benzoyl and palmitoyl groups were introduced into these macromolecules by acidylation to form amphiphilic hyperbranched polymers which have a high capability to encapsulate water soluble dyes such as Congo red. It is expected that the hyperbranched PAMAMs can play an important role in the industrial applications, such as coatings, cross-linking and phase-transferring agents because of their versatility and availability.     

Synthesis and Crystal Structure of a 1-D Coordination Polymer [Pb（ANS）2（phen）]n

A new one-dimensional coordination polymer, [Pb(phen)(ANS)2]n (ANS = 2-ami- nonaphthalene-1-sulfonate, phen = 1,10-phenanthroline), has been prepared by hydrothermal synthesis and structurally characterized by elemental analysis, IR and single-crystal X-ray diffrac- tion. The results determined by XRD reveal that the complex crystallizes in monoclinic, space group P21/c with a = 16.8374(14), b = 16.9825(14), c = 9.9392 (8) , β = 95.9830(10)o, V = 2826.5(4) 3, Mr = 831.86, Dc = 1.955 g/cm3, μ(MoKα) = 6.173 mm-1, F(000) = 1624, Z = 4, the final R = 0.0272 and wR = 0.0694 for 4305 observed reflections (I > 2σ(I)). In the complex, the adjacent lead(II) ions are bridged through the oxygen atoms of sulfonate groups in a syn-syn conformation, yielding an infinite zigzag chain. And the intermolecular N–H···O hydrogen bonds link the chains into two-dimensional layered networks, which are further assembled into a separate two-layer-film-like packing structure.     

Synthesis,Crystal Structure and Characterization of a Cobalt Coordination Polymer： [Co（1,4-ndc）（L） （H2O）]n

The title coordination polymer, [Co（1,4-ndc）（L）（H2O）]n 1 （1,4-H2ndc = 1,4-na- phthalenedicarboxylic acid and L =1-（5-（1H-imidazol- 1-yl）pentyl）- 1H-imidazole） has been hydrothermally synthesized and characterized by IR and single-crystal X-ray diffraction. It crystallizes in monoclinic, space group P21/n with a = 12.4333（12）, b = 13.2963（13）, c = 13.4678（13）A, α =β = 90°, y =107.302（2）°, V= 2125.7（4）A^3, Z = 4, CoC22H22N4O5, Mr = 481.37, De = 1.504 g/cm^3, F（000） = 996, μ（MoKa） = 0.850 mm^-1, R = 0.0472 and wR = 0.0984. Compound 1 exhibits a two-dimensional layer structure. The O-H...O and C-H...O hydrogen bonds stabilize the structure of 1.     

Synthesis and Crystal Structure of a New One-dimensional Double Helical-chain Polymer, {Zn（O2CC12H8CO2）（H2O）}n

1 INTRODUCTION Pronounced interest has been put in the field of coordination polymeric complexes owing to their fas- cinating molecular topologies[1～3] along with poten- tial applications as functional materials[4～6]. In par- ticular, complexes with helical structures attract much attention of scientists[7, 8] mainly due to their simi- larity to the structure of DNA molecule. To obtain new complexes, solv- and hydrothermal routes are currently used. In this way, the organic ligand act…     

Synthesis and Characterization of Poly （hydroxylethyl, octanediamine）-DL-aspartamide： a New Tissue Engineering Scaffolds

Collagen is the most widely used tissue-derived natural polymer for its goodbiocompatibility and cell adhesion but offers a limited range of mechanical properties1.The construction and properties of synthesized polypeptides are similar to collagen havethe…     

Synthesis and Characterization of a Novel Biomaterial： Maleic Anhydride-modified Poly（dl-lactic acid）

A novel modified poly(dl-lactic acid) (PDLLA) was obtained by covalently grafting of maleic anhydride onto the backbone of PDLLA, attempting to improve PDLLA‘s hydrophilicity and cell affinity and to provide reactive groups for further chemical modification. FTIR, ^13 C NMR and DSC were used to characterize the maleic anhydride-modified PDLLA.     

Synthesis and characterization of poly(d,l-lactide-co-glycolide) modified by maleic anhydride and 1,4-butanediamine

Bone tissue engineering is sought to apply strategies for bone defects healing biodegradable porous scaffolds without limitations and shortcomings. In this work, we have developed a novel maleic anhydride (MAH) and 1,4-butanediamine modified poly(lactide-co-glycolide) polymer (BMPLGA). The synthesized polymer was characterized by Fourier transform infrared spectrometry (FTIR), Nuclear magnetic resonance spectra (¹H NMR), gel permeation chromatography (GPC) and contact angle measurements. In addition, cell morphologies in the extracts and cell cytotoxity were also studied. The results showed that the BMPLGA was successfully obtained by introducing MAH and 1,4-butanediamine into PLGA in bulk. The introduction of anhydride and amino groups improved the hydrophilicity of PLGA. Fibroblastic cells showed normal morphologies in BMPLGA extracts, and the BMPLGA materials showed no cell cytotoxicity. The synthetic BMPLGA material may have potentials for biomedical applications due to improving hydrophilicity.     

Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution

Poly(lactic acid)(PLA)is one of the most important bio-plastics,and chemical modification of the already-polymerized poly(lactic acid)chains may enable optimization of its material properties and expand its application areas.In this study,we demonstrated that poly(lactic acid)can be readily dissolved in acrylic acid at room temperature,and acrylic acid can be graft-polymerized onto poly(lactic acid)chains in solution with the help of photoinitiator benzophenone under 254 nm ultraviolet(UV)irradiation.Similar photo-grafting polymerization of acrylic acid(PAA)has only been studied before in the surface modification of polymer films.The graft ratio could be controlled by various reaction parameters,including irradiation time,benzophenone content,and monomer/polymer ratios.This photo-grafting reaction resulted in high graft ratio(graft ratio PAA/PLA up to 180%)without formation of homopolymers of acrylic acid.When the PAA/PLA graft ratio was higher than 100%,the resulting PLA-g-PAA polymer was found dispersible in water.The pros and cons of the photo-grafting reaction were also discussed.     

苯乙烯/马来酸酐共聚物修饰碳纳米管的研究

利用羟基碳纳米管上的羟基与马来酸酐之间的简单反应, 在碳纳米管上引入双键, 进一步引发苯乙烯聚合, 在碳纳米管表面接枝苯乙烯马来酸酐共聚物, 同时采用羟基碳纳米管与苯乙烯马来酸酐共聚物直接反应也在碳纳米管的表面引入了苯乙烯马来酸酐共聚物. 经IR, Raman, TG和TEM测定, 证明了碳纳米管与苯乙烯马来酸酐共聚物之间为化学键连接关系.     

In vitro degradation behaviour of non-porous ultra-fine poly(glycolic acid)/poly(l-lactic acid) fibres and porous ultra-fine poly(glycolic acid) fibres

The in vitro degradation behaviour of non-porous ultra-fine poly(glycolic acid)/poly(l-lactic acid) (PGA/PLA) fibres and porous ultra-fine PGA fibres was investigated. The non-porous ultra-fine PGA/PLA fibres were prepared by electrospinning of a PGA/PLA solution in 1,1,1,3,3,3-hexafluoro-2-propanol and the porous ultra-fine PGA fibres were obtained from them via selective removal of PLA with chloroform. Since PLA has a lower degradation rate than PGA, the degradation rates of the ultra-fine PGA/PLA fibres decreased with increasing content of PLA. The porous ultra-fine PGA fibres were degraded in vitro in the order of non-porous PGA > P-PGA/PLA(90/10) > P-PGA/PLA(70/30) > P-PGA/PLA(50/50) > P-PGA/PLA(30/70) due to autocatalytic hydrolysis.     

聚L-谷氨酸可注射水凝胶的制备及性能

通过活化改性聚L-谷氨酸（PLGA）制备酰肼化PLGA（PLGA-ADH）和3-氨基-1,2-丙二醇改性的PLGA（PLGA-OH）,PLGA-OH经高碘酸钠氧化制得醛基化PLGA（PLGA-CHO）,以PLGA-ADH和PLGA-CHO为前驱体,通过席夫碱交联反应构建了PLGA可注射水凝胶.研究了酰肼化和醛基化改性前后PLGA的结构变化,考察了固含量对水凝胶成胶时间、溶胀行为、机械性能、体外降解性能、药物释放行为及微观形貌等的影响,并进行了初步的细胞培养实验及裸鼠皮下注射成胶实验.结果表明,该PLGA可注射水凝胶在组织工程领域具有良好的应用前景.     

苯胺链段为侧基的聚酰胺酸的合成及性质

采用三元共聚法制备了苯胺齐聚物为侧链的接枝型聚酰胺酸. 通过红外光谱、核磁共振谱及高效凝胶渗透色谱等技术对聚合物结构进行了表征. 该材料亚胺化后具有十分优异的热稳定性. 紫外-可见光谱和电化学测试结果表明, 该聚合物具有独特的光谱性质和可逆的电化学活性. 聚酰胺酸/ITO电致变色电极具有颜色变化明显, 响应速度较快, 着色效率高等优点, 是一种综合性能较好的电致变色聚合物材料.     

聚甲基丙烯酸与修饰聚丙烯酰胺间的络合作用

利用荧光各向异性,荧光探针和荧光猝灭等静态光物理技术研究了稀水溶液中聚甲基丙烯酸（ＰＭＡＡ）与阳离子修饰聚丙烯酰胺（ＱＣＰＡＭ）间的络合作用。结果表明：在ｐＨ＝２－８范围内,ＰＭＡＡ与ＱＣＰＡＭ之间发生明显络合,但以ｐＨ为４时络合作用最大,最佳络合本比为１：１（单体单元比）,络合作用的发生大大地改变了ＰＭＡＡ的构象行为,ＰＭＡＡ构象对ｐＨ和络合作用的双重依赖性有可能在新型“智能”凝胶的设计合成上获     

溶剂诱导的聚乳酸/聚乳酸衍生物共结晶行为

通过溶液浇铸法制备不同组分的左旋聚乳酸(PLLA)和聚(L-2-羟基-3-甲基丁酸)(PL-2H3MB)共混物.运用差示扫描量热仪(DSC)、偏光显微镜(POM)、广角X射线衍射(WAXD)和热重分析仪(TGA)分析共混物的结晶、熔融行为和热稳定性.通过观察到DSC加热曲线中新的熔融峰判断PLLA和PL-2H3MB共晶...     

基于聚乙二醇结构调控高分子量聚乳酸立构复合体系的结晶行为

设计合成了梳形聚(聚乙二醇甲醚丙烯酸酯)(PPEGA)及其与聚乙二醇(PEG)的嵌段共聚物(PEG-b-PPEGA).通过与高分子量左旋聚乳酸(PLLA)和右旋聚乳酸(PDLA)共混探究了PEG不同的结构对PLA立构复合体系(sc-PLA)结晶的影响.结果 表明线形PEGA和PEG能与sc-PLA完全相容,两者均能促进...