Synergistic extraction of cesium,strontium, and europium with adamantylated thiacalix[4]arenes in the presence of chlorinated cobalt dicarbollide

Synergistic extraction of long-lived fission products ¹³⁷Cs⁺, ⁸⁵Sr²⁺, and ¹⁵²Eu³⁺ from dilute HNO3 into dichloroethane with ligands derived from p-(1-adamantyl)thiacalix[4]arene in mixtures with chlorinated cobalt dicarbollide was studied. An extraordinary synergistic effect is observed in extraction of europium with p-(1-adamantyl)thiacalix[4]arene tetraacetate derivative. Amides of p-(1-adamantyl)thiacalix-[4]arene tetracarboxylic acid are selective toward europium, although their extraction ability toward the examined ions is lower than that of the classical extractant, p-(1-adamantyl)calix[4]arene tetracarboxylic acid diethylamide.     

Anionic alkyl diglycoldiamides with covalently bonded cobalt bis(dicarbollide)(1−) ions for lanthanide and actinide extractions

Ionic diamides composed of a N,N′-dialkyl diglycolyl complexing group and two cobalt bis(dicarbollide)(1−) anions were synthesized with the aim to develop efficient extraction agents for liquid-liquid extraction of polyvalent cations, i.e. lanthanides and actinides from high-level activity nuclear waste. Compounds of general formulation [{(N,N-(8-CH₂-CH₂O)₂-1,2-C₂B₉H₁₀)(1′,2′-C₂B₉H₁₁)-3,3′-Co)(N′,N′-R)NCOCH₂}₂O]Na₂, where R = n-C₄H₉, n-C₈H₁₇, n-C₁₂H₂₅ and 1-C₆H₄-4-CH₃ (1-4), were prepared and characterized by combination of ¹¹B ¹H, ¹³C NMR spectroscopy, ESI-MS, HPLC and other techniques. Effects of different nitrogen substitution in the structures of 1-4 on the extraction properties were tested. The study resulted in the observation that the compounds are significantly (2-3 orders in magnitude) more efficient extractants for Eu(III) and Am(III) than synergic mixtures of organic N,N′-tetra n-octyl diglycolic acid diamide (TODGA) and chlorinated cobalt bis(dicarbollide) at the same concentrations of both groups. Low polar mixtures of n-dodecane (D) and hexyl methyl ketone (HMK) can be applied as an auxiliary solvent for extraction, replacing thus the polar and less environmentally friendly nitro-, fluoro- and chloro- solvents used in the current dicarbollide liquid-liquid extraction process.     

Rapid concentrating of radiostrontium from model fallout,drinking and technological water,using solvent extraction with cobalt dicarbollide and Slovafol 909

The optimum concentration of the extractants for rapid radiostrontium concentration is 0.1M HB (chlorinated cobalt dicarbollide acid) and 1.5% vol. of Slovafol 909 in a mixture of CCl₄(40%) and nitrobenzene. The recommended initial carrier concentration is 2·10^–4 M Sr, initial aq. pH4.3, time of shaking 3 min. Yield in the range 80–97% can be achieved in rapidly concentrating Sr from 1 dm³ aqueous phase into 10–20 ml of the extract. The yield decreases with increasing Ca concentration in the model water. The time needed for the concentrating does not exceed 30 min.     

Extraction chromatographic study on the separation of Am<Superscript>3+</Superscript> and Eu<Superscript>3+</Superscript> using ethyl-BTP as the extractant

Ethyl-substituted bis-triazinylpyridine (Et-BTP), a nitrogen containing soft-donor extractant, was used in investigations pertaining to the separation of Am³⁺ and Eu³⁺ from dilute nitric acid feed solutions by extraction chromatography using XAD-4 as the inert support, chlorinated dicarbollide as the modifier and 2-nitrophenyloctylether (NPOE) as the diluent. After carrying out a series of experiments, the optimum composition of the extractant mixture for the resin was found out to be 0.1 M Et-BTP and 0.025 M CCD in NPOE. Separation factor values were encouraging to carry out subsequent batch uptake studies at varying nitrate ion concentration which indicated favourable separation behaviour up to NaNO₃ concentration of 2 M. Column studies have been carried out and conditions for elution and separation of Am³⁺ from Eu³⁺ have been found out. Long term stability of the resin was also investigated.     

2,2′-Dipyridyl-6,6′-dicarboxylic acid diamides: Synthesis,complexation and extraction properties

New ligands for complexing of the post-transition metals – diamides of 2,2′-bipyridyl-6,6′-dicarboxylic acid were developed, synthesised and characterised. They were proposed to be effective extractants towards americium. The structures of the amides were studied in solid as well as in solution. The extraction of Am and lanthanides depending on diamide structure, chlorinated cobalt dicarbollide (CCD) – diamide ratio, type of diluent was studied. The optimal conditions for Am/REE separation were determined. The properties of new potentiometric sensors on the base of 2,2′-dipyridyl-6,6′-dicarboxylic acid diamides were studied. The correlation structure vs. properties of ionophores (i.e. extractants), their sensitivity and selectivity in sensor analysis and extraction are discussed.     

Synthesis, structures, and conductivities of salts (BEDT-TTF)[9,9′(12′)-I2-3,3′-Co(1,2-C2B9H10)2] and (TTF)[9,9′,12,12′-I4-3,3′-Co(1,2-C2B9H9)2]

The radical cation salts of tetrathiafulvalene (TTF) and bis(ethylenedithio)tetrathiafulvalene (BEDT-TTF) with iodo derivatives of cobalt bis(dicarbollide), (TTF)[9,9′,12,12′-I₄-3,3′-Co(1,2-C₂B₉H₉)₂] and (BEDT-TTF)[9,9′(12′)-I₂-3,3′-Co(1,2-C₂B₉H₁₀)₂], respectively, were synthesized and their crystal structures were determined. The introduction of iodine atoms into the lower rim of the dicarbollide ligands, unlike the substitution at the upper rim, leads to insignificant changes in the crystal structure and the conductivity of the radical cation salts compared to the analogous salts based on unsubstituted cobalt bis(dicarbollide).     

Dibutyl phosphoric acid and its acid zirconium salt as an extractant for the separation of transplutonium elements and rare earths and for their partitioning

Acid Zr salt of dibutyl phosphoric acid (ZS HDBP) dissolved in 30% TBP with isoparaffines was investigated and successfully tested on “hot” rigs as TBP-compatible solvents for TPE and RE recovery from simulated and real HLW, containing 1–3 mol/L HNO₃, and for their partitioning with DTPA in formic media. Mo was also separated. The possibility of the use of 1–1.5 mol/L HDBP solutions in meta-nitrobenzotrifluoride (F-3) for these purposes is demonstrated as well. Addition of chlorinated cobalt dicarbollide (CCD) to ZS HDBP solution in F-3 gives rise to synergetic effect during extraction and, in combination with PEG, allows to extract Cs and Sr along with TPE and RE from HLW of mentioned acidity, and to separate the elements to fractions by their valence.     

Extraction of europium and americium by a mixture of CMPO and dicarbollide

The extraction of Eu³⁺ and Am³⁺ by a mixture of CMPO and dicarbollide in nitrobenzene has been studied. The synergetic effect of dicarbollide is pronounced at low acidities but still lower than for previously studied DBDECMP. Separation properties towards Am/Eu pair are small.     

Cationic complexes of Eu(III) and Sr(II) with diphosphine dioxides in organic extracts

IR spectroscopy was used to study the structure and composition of Eu(III) and Sr(II) complexes formed by cation-exchange extraction of these metals from their aqueous nitrate solutions with dichlorethane solutions of mixtures of chlorinated cobalt(III) dicarbollide (CCD) as a superacid with diphenyldiphosphine dioxides containing a methyl (Me-DPDO), ethyl (Et-DPDO), or polyoxyethylene bridge between two phosphorus atoms of phosphine oxide groups. At molar ratios DPDO/CCD ≤ 1, [Eu(H₂O)_nL₄]³⁺ complexes are formed in organic phases, whereas with an excess of DPDO relative to CCD, Eu(NO₃)L ₄ ²⁺ complexes are formed, where L = Me-or Et-DPDO. Polyoxyethylenediphosphine dioxide forms anhydrous complexes of composition Eu:L = 1:1 and 1:2 with Eu(III) and outer-spheric complexes of composition Sr:L = 1:1 and 1:2 with Sr(II), where the organic ligand molecules envelop the hydrated Sr(H₂O) _n ²⁺ cation. The peculiarities of extraction of the complexes are explained based on data about their composition and structure.     

Novel potentiometric copper (II) selective membrane sensors based on cyclic tetrapeptide derivatives as neutral ionophores

Two novel membrane sensors sensitive and reasonably selective for Cu²⁺ ions are described. These are based on the use of newly synthesized cyclic tetrapeptide derivatives as neutral ionophores and sodium tetraphenylborate (NaTPB) as an anionic excluder in plasticized PVC membranes. The sensors exhibit fast and stable near-Nernstian response over the concentration range 1.0 × 10⁻⁶ mol l⁻¹ to 1.0 × 10⁻² mol l⁻¹ Cu²⁺ with a cationic slope of 30.2-25.9 mV per decade at pH 4.5-7 with a lower detection limit of 0.05-0.13 μg ml⁻¹. Effects of plasticizers, lipophilic salts and various foreign common ions are tested. The sensors display long life-span, long term stability, high reproducibility, and short response time. Selectivity of both sensors is significantly high for Cu²⁺ over Fe³⁺, Al³⁺, Zn²⁺, Cd²⁺, Hg²⁺, Ni²⁺, Co²⁺, Mn²⁺, alkaline earth and alkali metal ions. The sensors are used for direct measurement of copper content in different rocks and industrial wastewater samples from electroplating factories. The results agree fairly well with data obtained using atomic absorption spectrometry.     

Extraction of fission products with 1,2-dichloroethane solutions of hexabromo derivative of cobalt dicarbollide from nitric acid medium

The dependence of the distribution of Cs, Sr, Ba, Eu, Ce between nitric acid solutions and 0.06M hexabromo derivative of cobalt dicarbollide (H⁺BBr ₆ ^– ) in dichloroethane has been investigated upon the concentration of the acid, the extractant and the synergistic additive Slovafol 909. The back-extraction due to the presence of propanol, hydrazine, nitric acid and NH₄NO₃ has been studied. The results were similar to those observed in analogous systems using nitrobenzene as the solvent.     

New boron-containing bacteriochlorin <Emphasis Type="Italic">p</Emphasis> cycloimide conjugate

A conjugate of the bacteriochlorophyll a derivative with the cobalt bis(dicarbollide) anion [3,3′-Co(1,2-C₂B₉H₁₁)₂]⁻ was synthesized.     

Structural variations and cation distributions in Mn3−xCoxO4 (0 ≤ x ≤ 3) dense ceramics using neutron diffraction data

Single phase ceramics of cobalt manganese oxide spinels Mn_3?xCo_xO₄ were structurally characterized by neutron powder diffraction over the whole solid solution range. For x < 1.75, ceramics obtained at room temperature by conventional sintering techniques are tetragonal, while for x ≥ 1.75 ceramics sintered by Spark Plasma Sintering are of cubic symmetry. The unit cells, metal–metal and metal–oxygen average bonds decrease regularly with increasing cobalt content. Rietveld refinements using neutron data show that cobalt is first preferentially substituted on the tetrahedral site for x < 1, then on the octahedral site for increasing x values. Structural methods (bond valence sum computations and calculations based on Poix's work in oxide spinels) applied to our ceramics using element repartitions and [M–O] distances determined after neutron data refinements allowed us to specify the cation distributions in all phases. Mn²⁺ and/or Co²⁺ occupy the tetrahedral site while Mn³⁺, Co²⁺, Co^III (cobalt in low-spin state) and Mn⁴⁺ occupy the octahedral site. The electronic conduction mechanisms in our highly densified ceramics of pure cobalt and manganese oxide spinels are explained by the hopping of polarons between adjacent Mn³⁺/Mn⁴⁺ and Co²⁺/Co^III on the octahedral sites.     

Effect of Ca<Superscript>2+</Superscript>, Mg<Superscript>2+</Superscript>, Fe<Superscript>3+</Superscript>, and Al<Superscript>3+</Superscript> Ions on the Deposition of Electrolytic Manganese Dioxide from Chloride Solutions

The effect of Ca²⁺, Mg²⁺, Fe³⁺, and Al³⁺ ions on the deposition of electrolytic manganese dioxide from chloride solutions was studied.__________Translated from Zhurnal Prikladnoi Khimii, Vol. 78, No. 5, 2005, pp. 751–754.Original Russian Text Copyright © 2005 by Kolosnitsyn, Minnikhanova, Karaseva, Dmitriev, Muratov.     

Synthesis of new benzimidazolium salts with tunable emission intensities and their application as fluorescent probes for Fe in pure aqueous media

A series of novel, water-soluble benzimidazolium salts with common ‘fluorophore–spacer–receptor’ PET design has been synthesized. Despite the common PET scaffold these benzimidazolium salts displayed diverse emission intensities in pure aqueous solutions. The observed emission intensities were found to be influenced by the functionalized alkyl side arms present on the benzimidazolium ring. These benzimidazolium salts were also found to act as selective sensors for Fe³⁺ ions over other metal ions like Na⁺, K⁺, Ca²⁺, Mg²⁺, Ba²⁺, Al³⁺, Cr³⁺, Co²⁺, Ni²⁺, Mn²⁺, Zn²⁺, Pb²⁺, Ag⁺, Cu²⁺ and Hg²⁺ in pure aqueous media.     

Adsorption of some hazardous radionuclides on cerium (IV) antimonate

Cerium(IV) antimonate was prepared by dropwise addition of 0.6M antimony pentachloride and 0.6M cerium ammonium nitrate solutions by a molar ratio of Ce/Sb 0.75. Exchange isotherms for H⁺/Co²⁺, H⁺/Cs⁺, H⁺/Zn²⁺, H⁺/Sr²⁺ and H⁺/Eu³⁺ were determined at 25, 40 and 60°C. Besides, it was proved that europium is physically adsorped, while zinc, strontium, cobalt and cesium are chemically adsorbed. Moreover, the heat of adsorption of zinc, strontium, cobalt and cesium on cerium (IV) antimonate was calculated and indicated that cerium(IV) antimonate is of endothermic behavior towards these ions. Also the distribution coefficients of these ions were determined and it was found that the selectivity is in the order: Eu³⁺>Sr²⁺>Cs⁺>Na⁺.     

Catalysis of the reaction of ozone with chloride ions by metal ions in an acidic medium

It was found that VO²⁺, Fe³⁺, Co²⁺, and Cu²⁺ ions catalyze the reaction of O₃ with Cl^- in an acidic medium. The dependence of the rate of Cl₂ liberation in the reaction of O₃ with Cl^- on the concentrations of H⁺, VO²⁺, Fe³⁺, Co²⁺, and Cu²⁺ ions in the reaction solution was studied. A reaction scheme was proposed to explain the experimentally found catalytic effects of these ions. The constants that characterize the steps of the proposed scheme were determined.Translated from Kinetika i Kataliz, Vol. 46, No. 1, 2005, pp. 147–152. Original Russian Text Copyright © 2005 by Levanov, Kuskov, Koiaidarova, Zosimov, Antipenko, Lunin.     

A microcalorimetric study of the toxicity of two cobalt compounds on <Emphasis Type="Italic">Escherichia coli</Emphasis> DH5α growth

Microcalorimetry was applied to study the toxic action of two cobalt compounds such as bis(salicylideniminato-3-propyl)methylaminocobalt(II) (denoted as Co(II)) and Co(III) sepulchrate trichloride (denoted as Co(sep)³⁺) on (E. coli) DH5α. The power-time curves of the E. coli DH5α growth were determined, and the thermokinetics parameters such as the growth rate constant k, the maximum power output P _m and the time (t _m) corresponding to the P _m were obtained. The half-inhibitory concentrations (IC₅₀) of Co(II) and Co(sep)³⁺ to E. coli DH5α were 15 and 42.1 mg mL⁻¹, respectively. The experimental results revealed that the toxicity of the Co(II) compound was larger than that of Co(sep)³⁺. On the other hand, the scanning electron microscopy (SEM) demonstrated that the two cobalt compounds had the same toxic mechanism on E. coli DH5α, which was attributed to the damage of cell wall of the bacteria caused by both Co(II) and Co(sep)³⁺. Furthermore, accumulation of intracellular cobalt of E. coli DH5α, due to the interaction of Co(II) or Co(sep)³⁺ and E. coli DH5α, has been found by using inductively coupled plasma (ICP) analytical technique.     

Evaluation of Native and Chemically Modified Sargassum glaucescens for Continuous Biosorption of Co(II)

In the present study, biosorption of stable cobalt was studied in an up-flow fixed-bed column using the brown alga Sargassum glaucescens treated with formaldehyde (FA) or MgCl₂. Notable increase in cobalt removal was observed for FA-treated biosorbent with 2.7 and 1.4 times higher dynamic capacity (DC) and uptake capacity (UC) than native alga, respectively. Consequently, FA-treated S. glaucescens was selected for further investigations. In particle size experiments, the DCs of 0.5–1 and 1–2 mm particles were both equal to 27.6 mg/g, and corresponding UCs were 34 and 38 mg/g, respectively. The maximum DC was obtained at residence time of 2.5 min. Studying the effect of additional ions indicated partial effect of Na⁺ and K⁺ ions on DC and UC, Mg²⁺ reduced highly the DC and slightly the UC while heavy metal ions (Ni²⁺, Cd²⁺, Cu²⁺, Zn²⁺, Pb²⁺ and Cr³⁺) caused decrease in both DC and UC about 1.5–4.7 and 1.8–3.2 times, respectively. Moreover, the column regeneration studies were carried out for four sorption–desorption cycles. The DC and the UC highly decreased in the second cycle, partially decreased or remained constant in the third and in the fourth one.     

Effect of the nature and concentration of salting-out agents on the extraction of cobalt(II) from chloride solutions with trialkylamine

The effect of chlorides of Ca²⁺, Ni²⁺, Mg²⁺, Al³⁺, Li⁺, Fe²⁺, Cr³⁺, Na⁺, NH ₄ ⁺ , La³⁺, Nd³⁺ on the extraction recovery of cobalt from chloride solutions with mixtures based on trialkylamine was studied. The series of the salting-out activity of differently charged cations and the degree of their coextraction were determined.