Chargements axisymétriques d'un bicouche transversalement isotropeAxisymmetric loading on a transversely isotropic two-layered medium

An exact three-dimensional analysis is developped for an axisymmetric loading acting on the surface of a semi-infinite medium composed by two transversely isotropic materials. The loading is assumed to be parallel to the elastic symmetry axis of the upper layer. The solutions of a concentrated force and a uniform loading distributed on a circle are obtained by exact integral expressions. The numerical results are performed to show the anisotropic effect with isovalue curves of stress. To cite this article: C. Ruimy, M. Dahan, C. R. Mecanique 330 (2002) 469–473.     

New integral formulation and self-consistent modeling of elastic–viscoplastic heterogeneous materials

Predicting the overall behavior of heterogeneous materials, from their local properties at the scale of heterogeneities, represents a critical step in the design and modeling of new materials. Within this framework, an internal variables approach for scale transition problem in elastic–viscoplastic case is introduced. The proposed micromechanical model is based on establishing a new system of field equations from which two Navier’s equations are obtained. Combining these equations leads to a single integral equation which contains, on the one hand, modified Green operators associated with elastic and viscoplastic reference homogeneous media, and secondly, elastic and viscoplastic fluctuations. This new integral equation is thus adapted to self-consistent scale transition methods. By using the self-consistent approximation we obtain the concentration law and the overall elastic–viscoplastic behavior of the material. The model is first applied to the case of two-phase materials with isotropic, linear and compressible viscoelastic properties. Results for elastic–viscoplastic two-phase materials are also presented and compared with exact results and variational methods.     

A combined viscoelastic–viscoplastic behavior of particle reinforced composites

This study formulates a micromechanical model for predicting effective viscoelastic–viscoplastic responses of composites. The studied composites consist of solid spherical particle reinforcements dispersed in a homogeneous matrix. The particle constituent is assumed linear elastic, while the matrix exhibits combined viscoelastic–viscoplastic responses. The Schapery integral model is used for the 3D isotropic non-linear viscoelastic responses. Two viscoplastic models are considered: the Perzyna model, having a rate-independent yield surface and an overstress function, and the Valanis endochronic model based on an irreversible thermodynamics without a yield surface. The Valanis model is suitable for materials when viscoplastic responses occur at early loadings (small stress levels). A unit-cell model with four particle and polymer sub-cells is generated to obtain homogenized responses of the particle-reinforced composites. Available micromechanical models and experimental data in the literature are used to verify the proposed micromechanical model in predicting effective time-dependent and inelastic responses of composites. Field variables in the homogenized composites are compared to the ones in heterogeneous composites. The heterogeneous composites, having detailed particle geometries, are modeled using finite element (FE) method.     

Application of finite strain viscoplasticity to polymeric fiber composites

The tensile behavior of polymer matrix fiber composites has been described in terms of an anisotropic model of finite viscoplasticity. Our constitutive approach is based on the kinematics of the additive form of the deformation rate tensor D generalized by Mandel [Mandel, J., 1971, Plasticité classique et viscoplasticité. Courses and Lectures, No. 97, International Center for Mechanical Sciences/Springer, Udine/Wien-New York] and Dafalias [Dafalias, Y.F., 1985. The plastic spin. ASME J. Appl. Mech. 52, 865–871]. The constitutive laws for D^p and W^p were written in accordance with the material anisotropy, whereas the constitutive law of hypoelasticity has been accordingly written in its objective form. Moreover, a viscoplastic model has been applied to represent the non-linear rate dependence. Experimental results performed in a wide strain rate region and in a wide strain range were simulated in a very accurate way. Additionally, the model was proved to predict creep behavior of the same material type as well.     

Macroscopic modelling of multiperiodic compositesModélisation macroscopique des composites multipériodiques

By a multiperiodic composite we mean a composite solid in which all constituents are periodically distributed in a matrix but a representative element (unit cell) may not exist. The aim of this Note is to propose a nonasymptotic approach to the formation of averaged (macroscopic) models of multiperiodic composites. The approach is based on the concept of tolerance averaging, which in [2] was applied to the modelling of periodic composites. The derived model, in contrast to homogenization, describes the effect of microstructure size on the overall solid behaviour and yields necessary conditions for the physical correctness of solutions to special problems. To cite this article: C. Wo?niak, C. R. Mecanique 330 (2002) 267–272.     

Kinematic shakedown by the Norton–Hoff–Friaa regularising method and augmented LagrangianAdaptation cinématique par la methode de régularisation de Norton–Hoff–Friaa et du Lagrangien augmenté

The shakedown analysis of elastic perfectly plastic structures is formulated as a discrete nonlinear mathematical programming problem by means of the finite element technique. The kinematical problem is regularized through the introduction of the Norton–Hoff viscoplastic material to overcome the non-differentiability of the objective function, and can be solved numerically by the augmented Lagrangian technique. To cite this article: M.A. Hamadouche, C. R. Mecanique 330 (2002) 305–311.     

Mechanical Performance of a Recycled Carbon Fibre/PP Composite

A composite made of recycled carbon fibres in recycled polypropylene matrix is studied experimentally to describe the features of the elastic and time dependent nonlinear mechanical behaviour. The properties of the developed material have a large variability to be addressed and understood. It was found that the stress-strain curves in tension are rather nonlinear at low strain rate and the strength is sensitive to strain rate. The elastic properties’ reduction for this composite after loading to high strains is rather limited. More important is that even in the “elastic region” due to viscoelastic effects the slope of loading–unloading curve is not the same and that at higher stress large viscoplastic strains develop and creep rupture is typical. The time and stress dependence of viscoplastic strains was analysed and described theoretically. The viscoelastic response of the composite was analysed using creep compliance, which was found to be slightly nonlinear.     

An anisotropic elastic–viscoplastic model for soft clays

Experimental evidences have shown deficiencies of the existing overstress and creep models for viscous behaviour of natural soft clay. The purpose of this paper is to develop a modelling method for viscous behaviour of soft clays without these deficiencies. A new anisotropic elastic–viscoplastic model is extended from overstress theory of Perzyna. A scaling function based on the experimental results of constant strain-rate oedometer tests is adopted, which allows viscoplastic strain-rate occurring whether the stress state is inside or outside of the yielding surface. The inherent and induced anisotropy is modelled using the formulations of yield surface with kinematic hardening and rotation (S-CLAY1). The parameter determination is straightforward and no additional experimental test is needed, compared to the Modified Cam Clay model. Parameters determined from two types of tests (i.e., the constant strain-rate oedometer test and the 24 h standard oedometer test) are examined. Experimental verifications are carried out using the constant strain-rate and creep tests on St. Herblain clay. All comparisons between predicted and measured results demonstrate that the proposed model can successfully reproduce the anisotropic and viscous behaviours of natural soft clays under different loading conditions.     

Second-order estimates for the large-deformation response of particle-reinforced rubbersEstimations homogénéisées pour le comportement mécanique des caoutchoucs renforcés en grandes déformations

This paper presents the application of a recently proposed ‘second-order’ homogenization method (J. Mech. Phys. Solids 50 (2002) 737–757) to the estimation of the effective behavior of hyperelastic composites subjected to finite deformations. The main feature of the method is the use of ‘generalized’ secant moduli that depend not only on the phases averages of the fields, but also on the phase covariance tensors. The use of the method is illustrated in the context of particle-, or fiber-reinforced elastomers and estimates analogous to the well-known Hashin–Shtrikman estimates for linear-elastic composites are generated. The new estimates improve on earlier estimates (J. Mech. Phys. Solids 48 (2000) 1389–1411) neglecting the use of fluctuations. In particular, the new estimates, unlike the earlier ones, are capable of recovering the exact incompressibility constraint when the matrix is also taken to be incompressible. To cite this article: O. Lopez-Pamies, P. Ponte Castañeda, C. R. Mecanique 331 (2003).     

Finite deformation of a polymer: experiments and modeling

The response of a polymer (polytetrafluoroethylene) to quasi-static and dynamic loading is determined and modeled. The polytetrafluoroethylene is extremely ductile and highly nonlinear in elastic as well as plastic behaviors including elastic unloading. Constitutive model developed earlier by Khan, Huang and Liang (KHL) is extended to include the responses of polymeric materials. The strain rate hardening, creep, and relaxation behaviors of polytetrafluoroethylene were determined through extensive experimental study. Based on the observation that both viscoelastic and viscoplastic deformation of polytetrafluoroethylene are time dependent and nonlinear, a phenomenalogical viscoelasto–plastic constitutive model is presented by a series connection of a viscoelastic deformation module (represented by three elements standard solid spring dashpot model), and a viscoplastic deformation module represented by KHL model. The KHL module is affected only when the stress exceeds the initial yield stress. The comparison between the predictions from the extended model and experimental data for uniaxial static and dynamic compression, creep and relaxation demonstrate that the proposed constitutive model is able to represent the observed time dependent mechanical behavior of polytetrafluoroethylene polytetrafluoroethylene qualitatively and quantitatively.     

Creep-rupture lifetime simulation of unidirectional metal matrix composites with and without time-dependent fiber breakage

A numerical simulation for predicting the axial creep-rupture lifetime of continuous fiber-reinforced metal matrix composites is proposed, based on the finite element method. The simulation model is composed of line elements representing the fibers and four-node isoparametric plane elements representing the matrix. While the fibers behave as an elastic body at all times, the matrix behaves as an elasto-plastic body at the loading process and an elasto-plastic creep body at the creep process. It is further assumed in the simulation that the fibers are fractured not only in stress criterion but time-dependently with random nature. Simulation results were compared with the creep-rupture lifetime data of a boron-aluminum composite with 10% fiber volume fraction experimentally obtained. The simulated creep-rupture lifetimes agreed well with the averages of the experimental data. The proposed simulation is further carried out to predict a possibility of creep-rupture for the composite without time-dependent fiber breakage. It is finally concluded that the creep-rupture of a boron-aluminum composite is closely related with the shear stress relaxation occurring in the matrix as well as time-dependent fiber breakage.     

The viscoelastic and viscoplastic behavior of low-density polyethylene

Three series of tensile tests with constant cross-head speeds (ranging from 5 to 200 mm/min), tensile relaxation tests (at strains from 0.03 to 0.09) and tensile creep tests (at stresses from 2.0 to 6.0 MPa) are performed on low-density polyethylene at room temperature. Constitutive equations are derived for the time-dependent response of semicrystalline polymers at isothermal deformation with small strains. A polymer is treated as an equivalent heterogeneous network of chains bridged by temporary junctions (entanglements, physical cross-links and lamellar blocks). The network is thought of as an ensemble of meso-regions linked with each other. The viscoelastic behavior of a polymer is modelled as thermally-induced rearrangement of strands (separation of active strands from temporary junctions and merging of dangling strands with the network). The viscoplastic response reflects mutual displacement of meso-domains driven by macro-strains. Stress–strain relations for uniaxial deformation are developed by using the laws of thermodynamics. The governing equations involve five material constants that are found by fitting the observations. Fair agreement is demonstrated between the experimental data and the results of numerical simulation. It is shown that observations in conventional creep tests reflect not only the viscoelastic, but also the viscoplastic behavior of an ensemble of meso-regions.     

Analytical elasto-creep model of interfacial thermal stresses and strains in trilayer assemblies

A two-dimensional model has been developed for thermal stresses, elastic strains, creep strains, and creep energy density at the interfaces of short and long trilayer assemblies under both plane stress and plane strain conditions. Both linear (viscous) and non-linear creep constitutive behavior under static and cyclic thermal loading can be modeled for all layers. Interfacial stresses and strains are approximated using a combination of exact elasticity solutions and elementary strength of materials theories. Partial differential equations are linearized through a simple finite difference discretization procedure. The approach is mathematically straightforward and can be extended to include plastic behavior and problems involving external loads and a variety of geometries. The model can provide input data for thermal fatigue life prediction in solder or adhesive joints. For a typical solder joint, it is demonstrated that the predicted cyclic stress–strain hysteresis shows shakedown and a rapid stabilization of the creep energy dissipation per cycle in agreement with the predictions of finite element analysis.     

Solutions exactes de fissure d'interface sous contact frottant avec un milieu indéformableExact solutions of the interface crack between elastic and rigid bodies under contact with friction

One considers an interface crack between an elastic half-plane and a rigid half-plane, in the presence of Coulomb's friction. There exists two singular solutions at the semi-infinite crack tip, which correspond physically to the push-in and the pull-out of a rigid fiber in an elastic matrix. The exact solutions show that only the mode II is present and there is no oscillatory behavior of the stress and the displacement near the crack tip, but an oscillatory behavior is observed at the transition point with the stress free zone. There exists four types of singular solutions for finite crack in bounded medium, but only one in an infinite medium. To cite this article: H.D. Bui, A. Oueslati, C. R. Mecanique 332 (2004).     

A homogenization theory for time-dependentnonlinear composites with periodic internal structures

A homogenization theory for time-dependent deformation such as creep andviscoplasticity of nonlinear composites with periodic internal structures is developed. To beginwith, in the macroscopically uniform case, a rate-type macroscopic constitutive relation betweenstress and strain and an evolution equation of microscopic stress are derived by introducing twokinds of Y-periodic functions, which are determined by solving two unit cell problems.Then, the macroscopically nonuniform case is discussed in an incremental form using thetwo-scale asymptotic expansion of field variables. The resulting equations are shown to beeffective for computing incrementally the time-dependent deformation for which the history ofeither macroscopic stress or macroscopic strain is prescribed. As an application of the theory,transverse creep of metal matrix composites reinforced undirectionally with continuous fibers isanalyzed numerically to discuss the effect of fiber arrays on the anisotropy in such creep.     

Uniform strain fields and exact results in an elastoplastic fibre-reinforced composite

This work is concerned with a two-phase material consisting of an elastoplastic matrix reinforced by linearly elastic fibres. It is first shown that uniform strain fields can be generated in this heterogeneous material. A return-mapping based algorithm is then proposed and used to find uniform strain loading paths. With the help of uniform strain fields, exact results, independent of the transverse geometry and arrangement of the fibres, are derived for the effective elastic properties and for the effective initial and current yield surfaces. To cite this article: Q.-C. He, H. Le Quang, C. R. Mecanique 332 (2004).     

A non-linear uniaxial integral constitutive equation incorporating rate effects,creep and relaxation

A previously proposed first order non-linear differential equation for uniaxial viscoplasticity, which is non-linear in stress and strain but linear in stress and strain rates, is transformed into an equivalent integral equation. The proposed equation employs total strain only and is symmetric with respect to the origin and applies for tension and compression. The limiting behavior for large strains and large times for monotonic, creep and relaxation loading is investigated and appropriate limits are obtained. When the equation is specialized to an overstress model it is qualitatively shown to reproduce key features of viscoplastic behavior. These include: initial linear elastic or linear viscoelastic response: immediate elastic slope for a large instantaneous change in strain rate normal strain rate sensitivity and non-linear spacing of the stress-strain curves obtained at various strain rates; and primary and secondary creep and relaxation such that the creep (relaxation) curves do not cross. Isochronous creep curves are also considered. Other specializations yield wavy stress-strain curves and inverse strain rate sensitivity. For cyclic loading the model must be modified to account for history dependence in the sense of plasticity.     

Cylindre transverse isotrope poroélastique chargé cycliquement : application à un ostéonCyclic loading of a transverse isotropic poroelastic cylinder: a model for the osteon

The poroelastic problem associated with a hollow cylinder under cyclic loading is solved. Both fluid and solid phases are supposed compressible. Solid matrix is modeled as an elastic transverse isotropic material. An explicit close-form solution for the steady state is obtained. This cylinder is considered as a model for an osteon, the basic unit of cortical bone. The fluid flow distribution as a function of poroelastic properties and cyclic loading is discussed, as this could influence bone remodeling. To cite this article: A. Rémond, S. Naili, C. R. Mecanique 332 (2004).     

Evolution of plastic zones in dynamically loaded plates using different elastic–viscoplastic laws

In the framework of viscoplastic theory many different laws were developed, accounting for material behaviors like creep, relaxation or evolution of overstresses. Though each model is able to predict in uni-axial material tests the values of stresses depending on plastic strains and plastic strain rates the question is if solutions of simulations are still realistic if the viscoplastic law is applied on structural deformations. In the present study strain rate sensitive metal plates are subjected to shock waves. The purpose is to compare simulation results obtained with different elastic–viscoplastic laws to experiments in order to determine the most appropriate material model. By subjecting circular metal plates experimentally to shock wave loadings realistic deformation histories are measured. The measurements are compared to simulation results obtained with different viscoplastic laws. The aim is to find out the accuracy of each model concerning the predictions of displacements, shape formings, spread of plastic zones and evolutions of inner bending moments.