基于天然高分子基元的阻隔层对磁性载药聚乳酸微球的控释作用

利用层层组装技术构建了基于天然高分子壳聚糖和海藻酸钠的阻隔层, 并研究了该阻隔层对磁性载药聚乳酸微球的药物释放作用. 实验结果表明, 阻隔层能够有效抑制模型药物的突释, 具有延缓药物释放的效果. 具有阻隔层的磁性载药体系具有药物释放平缓和生物相容性高等特点, 是理想的磁靶向载药体系.     

Application and mechanism of inhalation profile improvement of DPI formulations by mechanofusion with magnesium stearate

In our previous paper, we reported the inhalation properties of dry powder inhaler (DPI) formulations containing Compound A and mechanofusion-processed lactose carriers. The mechanofusion process with magnesium stearate (Mg-St) on the lactose carrier enhanced the fine particle fraction (FPF) value of the Andersen cascade impactor (ACI) study. The increase of FPF seemed to be associated with the increase of the dispersibility of drug particles. The objectives of this study were (1) to evaluate the applicability of lactose carrier mechanofusion-processed with Mg-St and (2) to examine the mechanism of FPF alteration by the mechanofusion process applied on the lactose carrier with or without additive. The inhalation profiles of DPI formulations containing four different pharmaceutical compounds were evaluated with an ACI. The dispersibility of the formulations was observed by particle size distribution measurement in the air stream and the adhesive force was measured bydirect separation method. It was found that higher FPF was obtained with lactose mechanofusion-processed with Mg-St as compared to control lactose carriers for all four compounds. This suggested that mechanofusion process with Mg-St is widely applicable in DPI formulations. The homogenization of surface adhesiveness was attributed to the increased FPF of the DPI including lactose mechanofusion-processed with Mg-St, as suggested by the combination of several physicochemical characteristics. Combination of different characterization methods would be of help to clarify the whole mechanism which defines the inhalation properties of DPI formulations.     

Multiparticulate chitosan-dispersed system for drug delivery

A multiparticulate chitosan-dispersed system (CDS), which is composed of the drug reservoir and the drug release-regulating layer, was developed for drug delivery. The drug release-regulating layer is a mixture of water-insoluble polymer and chitosan powder. The drug is released from CDS pellets in all regions of the gastrointestinal tract (from the stomach to the colon). CDS pellets containing chitosan powder were designed to dissolve chitosan powder partly in the release-regulating layer in the stomach and release part of drug. After passing through the stomach, the drug is released from CDS pellets at a constant speed in the small intestine. In the large intestine, CDS pellets were designed to disintegrate the remaining chitosan powder at an accelerated speed and the remaining drug in CDS pellets is released. The drug release rate can be controlled with the thickness of the chitosan-dispersed water-insoluble layer. Furthermore, for colon-specific drug delivery, an additional outer enteric coating is necessary to prevent drug release from CDS pellets in the stomach, because the chitosan-dispersed water-insoluble layer dissolves gradually under acidic conditions. The resulting enteric-coated CDS (E-CDS) pellets were found to permit colon-specific drug delivery. In this study, the multiparticulate CDS was adopted not only for colon-specific drug delivery but also for sustained drug release.     

Novel approach to DPI carrier lactose with mechanofusion process with additives and evaluation by IGC

The effect of lactose carrier surface property on the inhalation profile of dry powder inhaler (DPI) was evaluated using a micronized drug (Compound A) by inverse gas chromatography (IGC). Mechanofusion with magnesium stearate (Mg-St) or sucrose stearate increased the fine particle fraction (FPF), considered to be due to decrease in the interaction between Compound A and the lactose carrier. The effect of Compound A concentration on FPF was smaller in mechanofusion-processed lactose compared to intact lactose, especially when processed with Mg-St. The relationship between the IGC parameters of the lactose and FPF was also investigated. FPF increased as both the dispersive component of the surface energy and acidity similarity between the lactose carriers and Compound A increased. Although further investigation is necessary, it could be suggested that acidity similarity decreases the interaction between Compound A and lactose, thus contributing to the increase in the FPF. In conclusion, (1) mechanofusion with Mg-St or sucrose stearate could be an effective method to improve FPF of a DPI drug formulation; (2) IGC would be a valuable method to investigate the interaction between a drug and the DPI carrier; and (3) a relationship between surface acidity and inhalation profile was suggested.     

Properties of gastroretentive sustained release tablets prepared by combination of melt/sublimation actions of L-menthol and penetration of molten polymers into tablets

A novel floating sustained release tablet having a cavity in the center was developed by utilizing the physicochemical properties of L-menthol and the penetration of molten hydrophobic polymer into tablets. A dry-coated tablet containing famotidine as a model drug in outer layer was prepared with a L-menthol core by direct compression. The tablet was placed in an oven at 80°C to remove the L-menthol core from tablet. The resulting tablet was then immersed in the molten hydrophobic polymers at 90°C. The buoyancy and drug release properties of tablets were investigated using United States Pharmacopeia (USP) 32 Apparatus 2 (paddle 100 rpm) and 900 ml of 0.01 N HCl. The L-menthol core in tablets disappeared completely through pathways in the outer layer with no drug outflows when placed in an oven for 90 min, resulting in a formation of a hollow tablet. The hollow tablets floated on the dissolution media for a short time and the drug release was rapid due to the disintegration of tablet. When the hollow tablets were immersed in molten hydrophobic polymers for 1 min, the rapid drug release was drastically retarded due to a formation of wax matrices within the shell of tablets and the tablets floated on the media for at least 6 h. When Lubri wax? was used as a polymer, the tablets showed the slowest sustained release. On the other hand, faster sustained release properties were obtained by using glyceryl monostearate (GMS) due to its low hydrophobic nature. The results obtained in this study suggested that the drug release rate from floating tablets could be controlled by both the choice of hydrophobic polymer and the combined use of hydrophobic polymers.     

Preparation of floating drug delivery system by plasma technique

A novel intragastric floating drug delivery system (FDDS) has been prepared by pulsed plasma-irradiation on the double-compressed tablet of 5-Fluorouracil (5-FU) as a core material with outer layer composed of a 68/17/15 weight ratio of Povidone (PVP), Eudragit RL (E-RL) and NaHCO3. The plasma heat flux caused the thermal decomposition of NaHCO3 to generate carbon dioxide and the resultant gases were trapped in bulk phase of outer layer, so that the tablets turned to have a lower density than the gastric contents and remained buoyant in simulated gastric fluid for a prolonged period of time. In addition, the release of 5-FU from the tablet is sustained by occurrence of plasma-induced crosslink reaction on the outer layer of tablet and the release rate of 5-FU can be well controlled by plasma operational conditions.     

Analysis of the release process of phenylpropanolamine hydrochloride from ethylcellulose matrix granules

The release properties of phenylpropanolamine hydrochloride (PPA) from ethylcellulose (EC, ethylcellulose 10 cps (EC#10) and/or 100 cps (EC#100)) matrix granules prepared by the extrusion granulation method were examined. The release process could be divided into two parts, and was well analyzed by applying square-root time law and cube root law equations, respectively. The validity of the treatments was confirmed by the fitness of the simulation curve with the measured curve. At the initial stage, PPA was released from the gel layer of swollen EC in the matrix granules. At the second stage, the drug existing below the gel layer dissolved, and was released through the gel layer. Also, the time and release ratio at the connection point of the simulation curves was examined to determine the validity of the analysis. Comparing the release properties of PPA from the two types of EC matrix granules, EC#100 showed more effective sustained release than EC#10. On the other hand, changes in the release property of the EC#10 matrix granule were relatively more clear than that of the EC#100 matrix granule. Thus, it was supposed that EC#10 is more available for controlled and sustained release formulations than EC#100.     

REDV/雷帕霉素复合涂层构建内皮细胞选择性功能界面

运用复合涂层的概念构建了兼具药物洗脱和内皮促进作用的载药涂层. 以载雷帕霉素(Rapamycin, RAP)的聚乙二醇甲基丙烯酸酯(PEGMA)-甲基丙烯酸丁酯(BMA)(PEGMA-BMA, PEGB)为内层, Arg-Glu-Asp-Val(REDV)多肽修饰的PEGBN为外层包裹载药涂层. 体外药物释放结果表明, 雷帕霉素可以维持缓慢稳定的长效释放, 释放过程中没有出现暴释现象. 表面细胞生长行为表明, 雷帕霉素可以有效地阻抗内皮细胞和平滑肌细胞的黏附, 抑制细胞活性; 随着药物释放的进行, 雷帕霉素浓度逐渐减低, 但涂层依然维持对平滑肌细胞的非特异性阻抗; 而REDV修饰的外涂层开始呈现内皮细胞的选择性黏附, 随着释放时间延长, 内皮细胞特异选择性也逐渐加强. 雷帕霉素和REDV多肽协同构建的复合涂层能够有效抑制平滑肌细胞的增殖, 获得内皮细胞选择性黏附.     

Biomineralized polysaccharide beads for dual-stimuli-responsive drug delivery

Biomineralized polysaccharide-coated alginate beads containing PNIPAAM were prepared. The resulting beads can be used as carriers for sustained pH/temperature-sensitive drug delivery. Characterizations using SEM, EDS, FTIR, and POM revealed that the beads were covered by the calcium-phosphate-mineralized alginate/chitosan membrane. The drug-release behavior was examined using indomethacin as a model drug, and the release profile of the developed materials was found to be responsive to pH and temperature. The release profile could be sustained under neutral conditions, indicating that the mineralized polysaccharide membrane could prevent the permeability of the encapsulated drug and reduce the drug release rate.     

Synthesis, characterization and sustaining controlled release effect of mesoporous SBA-15/ramipril composite drug

A loading of ramipril in SBA-15 (Santa Barbara Amorphous) mesoporous material was studied. (SBA-15)-ramipril composite material was characterized by chemical analysis, infrared spectroscopy, powder X-ray diffraction, low temperature N₂ adsorption–desorption at 77 K characterization techniques. Ramipril drug release processes from SBA-15 host to simulated body fluid (SBF), simulated gastric juice (SGJ), simulated intestinal fluid (SIF) were monitored in a simulated way and actions of the sustained release of (SBA-15)-ramipril was studied. The results showed that the loading amount of ramipril drug in SBA-15 was 90.30 mg/g. The cumulative sustained release rate of ramipril composite drug in SBF achieved 99.7 % after 27 h. When the sustained release of composite drug in SGJ was 8 h, the maximum cumulative sustained release ratio achieved 54.9 %. When the sustained release of composite drug was 9 h in SIF, the maximum cumulative sustained release ratio achieved 34.9 %. The method described in this study is suitable for carrying ramipril drug on SBA-15, and a new carrier to load ramipril drug was found. Meanwhile, the efficacy of ramipril drug and time efficacy could be improved.     

Stimuli‐responsive zein‐based nanoparticles as a potential carrier for ellipticine: Synthesis,release, and in vitro delivery

In the present research, we have investigated a drug delivery system based on the pH‐responsive behaviors of zein colloidal nanoparticles coated with sodium caseinate (SC) and poly ethylene imine (PEI). These systematically designed nanoparticles were used as nanocarriers for encapsulation of ellipticine (EPT), as an anticancer drug. SC and PEI coatings were applied through electrostatic adsorption, leading to the increased size and improved polydispersity index of nanoparticles as well as sustained release of drug. Physicochemical characteristics such as hydrodynamic diameter, size distribution, zeta potential and morphology of nanoparticles prepared using different formulations and conditions were also determined. Based on the results, EPT was encapsulated into the prepared nanoparticles with a high drug loading capacity (5.06%) and encapsulation efficiency (94.8%) under optimal conditions. in vitro experiments demonstrated that the release of EPT from zein‐based nanoparticles was pH sensitive. When the pH level decreased from 7.4 to 5.5, the rate of drug release was considerably enhanced. The mechanism of pH‐responsive complexation in the drug encapsulation and release processes was extensively investigated. The pH‐dependent electrostatic interactions and drug state were hypothesized to affect the release profiles. Compared to the EPT‐loaded zein/PEI nanoparticles, the EPT‐loaded zein/SC nanoparticles exhibited a better drug sustained‐release profile, with a smaller initial burst release and longer release period. According to the results of in vitro cytotoxicity experiments, drug‐free nanoparticles were associated with a negligible cytotoxicity, whereas the EPT‐loaded nanoparticles displayed a high toxicity for the cancer cell line, A549. Our findings indicate that these pH‐sensitive protein‐based nanoparticles can be used as novel nanotherapeutic tools and potential antineoplastic drug carriers for cancer chemotherapy with controlled release.     

Hepatic-targeting microcapsules construction by self-assembly of bioactive galactose-branched polyelectrolyte for controlled drug release system

We describe the construction of hepatic-targeting microcapsules by self-assembly of chemo-enzymatic synthesized poly(vinyl galactose ester-co-methacryloxyethyl trimethylammonium chloride) (PGEDMC) containing galactose branches, which can be specifically recognized by membrane bound galactose receptors (ASGPR), for acyclovir (ACV) controlled release system. Alternate deposition of PGEDMC and poly(sodium 4-styrenesulfonate) (PSS) was carried out on ACV microcrystals. It was revealed that the drug release rate decreases with the increase of coated layer number and a microcapsule-drying treatment would enhance the sustained release effect probably because of a multilayer shrink and tightness during the process. The complete release of ACV yielded a hollow PGEDMC/PSS multilayered network with favorable integrity and nano-thickness by TEM and SEM. The potential targetability of the system was proved in vitro by PNA lectin recognition. Lectin hardly adsorbed on the film where the outmost layer was a polyanion or a polycation without galactose component. Whilst the galactose-containing layer (PGEDMC) was the outmost layer, a significant lectin combination was observed. This technique could provide a promising way to encapsulate and deliver various target substances in biological and pharmaceutical applications.     

Preparation and Characterization of a Novel Drug Delivery System: Biodegradable Nanoparticles in Thermosensitive Chitosan/Gelatin Blend Hydrogels

A novel injectable in situ gelling drug delivery system (DDS) consisting of biodegradable N-(2-hydroxyl) propyl-3-trimethyl ammonium chitosan chloride (HTCC) nanoparticles and thermosensitive chitosan/gelatin blend hydrogels was developed for prolonged and sustained controlled drug release. Four different HTCC nanoparticles, prepared based on ionic process of HTCC and oppositely charged molecules such as sodium tripolyphosphate, sodium alginate and carboxymethyl chitosan, were incorporated physically into thermosensitive chitosan/gelatin blend solutions to form the novel DDSs. Resulting DDSs interior morphology was evaluated by scanning electron microscopy. The effect of nanoparticles composition on both the gel process and the gel strength was investigated from which possible hydrogel formation mechanisms were inferred. Finally, bovine serum albumin (BSA), used as a model protein drug, was loaded into four different HTCC nanoparticles to examine and compare the effects of controlled release of these novel DDSs. The results showed that BSA could be sustained and released from these novel DDSs and the release rate was affected by the properties of nanoparticle: the slower BSA release rate was observed from DDS containing nanoparticles with a positive charge than with a negative charge. The described injectable drug delivery systems might have great potential application for local and sustained delivery of protein drugs.     

Nanoaggregate of thermosensitive chitosan-Pluronic for sustained release of hydrophobic drug

A thermo-sensitive chitosan-Pluronic copolymer (CP) was prepared by grafting mono-carboxyl Pluronic onto the chitosan using 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide (EDC) and N-hydroxysuccinimide (NHS). Indomethacin (IMC)-loaded nanoaggregate (NA) was prepared using the synthesized CP by the direct dissolution method. The critical aggregate concentration (CAC), hydrodynamic size and surface morphology of the prepared CP nanoaggregate (CPNA) were characterized by fluorescence spectroscopy, dynamic light scattering (DLS), and transmission electron microscopy (TEM), respectively. The resulting CAC and the average diameter of CPNA were about 0.31 g/l and 120 nm, indicating high structural stability of CPNA and size favorable for intravenous delivery of drugs. In vitro release test of the IMC encapsulated into CPNA showed sustained release rate of IMC as compared with that from Pluronic micelle. Therefore, we can conclude that our CPNA can be a novel type of superior drug carrier for sustained delivery of hydrophobic drugs.     

Preparation of thin polymer films with controlled drug release

Poly(N-isopropylacrylamide) (PAAm) is a thermal responsive polymer that undergoes a structural change in aqueous solution at its lower critical solution temperature (LCST). PAAm-modified silicon substrates were prepared and the effect of PAAm density on the thermal response of the modified surface was examined in terms of changes in the water contact angle as a basis for applying the structural change of the polymer to controlled drug release. Changes with temperature in the ability to load and release of the modified layer for drug were also examined using 2-acetoxybenzoic acid (aspirin) as a model drug. The amount of PAAm was found to greatly affect the thermal response and the ability to load and release of the modified layer for aspirin.     

Release from or through a wax matrix system. IV. Generalized expression of the release process for a reservoir device tablet

Generalization of the release process through the wax matrix layer was examined by use of a reservoir device tablet. The wax matrix layer of the reservoir device tablet was prepared from a physical mixture of lactose and hydrogenated castor oil to simplify the release properties. Release through the wax matrix layer showed zero-order kinetics in a steady state after a given lag time, and could be divided into two stages. The first stage was the formation process of water channel by dissolving the soluble component in the wax matrix layer. The lag time obtained by applying the square root law equation was well connected with the amount of the matrix layer and mixed weight ratio of components in this layer. The second stage was the zero-order release process of drug in the reservoir through the wax matrix layer, because the effective surface area was fixed. The release rate constants were connected with thickness of the matrix layer and permeability coefficient, and the permeability coefficients were connected with the diffusion coefficient of drug and porosity. Hence the release rate constant could be connected with the amount of matrix layer and the mixed weight ratio of components in the matrix layer. It was therefore suggested that the release process could be generalized using the amount of matrix layer and the mixed weight ratio of components in the matrix layer.     

Nano engineered biodegradable capsules for the encapsulation and kinetic release studies of ciprofloxacin hydrochloride

Polyelectrolyte based nano and micro capsules have been extensively studied as promising drug carrier in recent years. Natural degradable capsules have received great deal of attention due to their fascinating structural and morphological characteristics, biocompatibility, sustained and targeted-release capabilities. In this work, chitosan - dextran sulphate nano capsules were prepared via Layer-by-Layer (L-b-L) technique using sacrificial template for drug delivery applications. The loading and in vitro release studies were performed using ciprofloxacin hydrochloride as a model drug. The release media used in the study are plain water and Phosphate Buffered Saline (PBS). The optimum drug load was 389 ​μg, at a loading pH of 2.1 and a temperature of 25 ​°C for 50 ​min encapsulation time. The drug loaded capsules exhibited a slow and sustained release up to 24 ​h and the maximum release rate was obtained at pH 1.2 in water and pH 7.4 in PBS. Least amount of drug release occurred at pH 5.0 in both the release media. The amounts of drug release in water at pH 1.2, pH 5.0 and pH 7.4 are 309 ​μg, 163 ​μg and 251 ​μg respectively where as the corresponding values in the case of PBS (at pH 1.2, pH 5.0 and pH 7.4) are 236 ​μg, 198 ​μg and 251 ​μg respectively. Two different models namely, Ritger - Peppas and Higuchi models were chosen to study the release kinetics behaviour of ciprofloxacin hydrochloride. The prepared bio-degradable capsules had potential as drug carrier for targeting antibacterial drugs with diverse functionality.     

Effect of Sodium Alginate on the Properties of Thermosensitive Hydrogels

Sodium alginate (SA ) was combined with poly(N ‐isopropylacrylamide) (PNIPAAm ) to prepare thermosensitive hydrogels through semi‐interpenetrating polymer network (semi‐IPN ) and fully interpenetrating polymer network (full‐IPN ). The thermosensitive, swelling, mechanical, and thermal properties of pure PNIPAAm , SA /PNIPAAm semi‐IPN , and Ca‐alginate/PNIPAAm full‐IPN hydrogels were investigated. The formation of semi‐IPN and full‐IPN significantly improved the hydrogels’ swelling capability and mechanical properties without altering their thermosensitivity. 5‐Fluorouracil (5‐Fu) was selected as a model drug to study the release behaviors of the hydrogels. It was found that in vitro controlled drug release from semi‐IPN hydrogels showed an initial release burst, followed by a slower and sustained release, before reaching equilibrium. Full‐IPN hydrogels showed slow and sustained release during the whole process. Temperature and pH were found to affect the rate of drug release. Ca‐alginate/PNIPAAm full‐IPN hydrogels have potential application as drug delivery matrices in controlled drug release.     

Modification of the physicochemical properties of minocycline hydrochloride ointment with cyclodextrines for optimum treatment of bedsore

Modification to find the best physicochemical properties of minocycline hydrochloride ointment for optimum treatment of bedsore was investigated by coformulating various types of cyclodextrins (CyD) in the ointment base. It was found that the drug release rate from the ointment base was modified according to the preparation method of ointment base and the type of CyD admixed. The physicochemical properties, such as viscosity, elution volume, water absorption of ointment base were also modified by those factors. The mechanism of physicochemical modification with CyD was explained by the structural change of ointment base and the change of surface tension of emulsifying agent solution with the CyD. The stability of ointment was investigated by confirming the reproducibility of drug release rate after storage at ambient and cooled temperature conditions. In conclusion, a fused mixed ointment with beta-CyD was found to be preferable for treatment of bedsore, because of the improved drug release rate, lowered viscosity and increased elution volume of the resultant ointment.     

Tunable self-assembled stereocomplexed-polylactic acid nanoparticles as a drug carrier

In this study, a model hydrophilic drug (porphyrin) was encapsulated within hydrophobic polylactic acid (PLA) nanoparticles (NPs) with different crystallinity and the relevant release behaviors were investigated. The crystalline modification was done using a modified nanoprecipitation method, where homo and stereocomplexed PLA NPs with different average diameters based on varying polymer concentrations and solvent/nonsolvent ratios (S/N) were prepared. Entrapment efficiency and drug release of sterocomplexed-PLA NPs were compared with neat poly(l -lactic acid) (PLLA) NPs. Furthermore, to get the more sustained release, porphyrin-loaded NPs were immobilized within electrospun poly(d ,l -lactide-co-glycolide (PLGA) nanofibers (NFs). Outcomes revealed that solution concentration and solvent/nonsolvent ratio play significant roles in the formation of homo and stereocomplexed NPs. On the other hand, it was found that the formation of stereocrystals did not significantly affect the size and morphology of NPs compared with neat NPs. With regard to the entrapment efficiency and drug content, stereocomplexd-PLA NPs behave relatively the same as neat PLLA NPs while the more sustained release was observed for stereocomplexed NPs. Also, it was observed that electrospinning of PLGA solution loaded by NPs led to the uniform distribution of NPs into PLGA fibers. Encapsulating the drug-loaded NPs into nanofibers decreased the rate of drug release by 50% after 24 h, compared with direct loading of drug into PLGA NFs. We conclude that it is possible to tune the entrapment efficiency and modify the release rate of the drug by giving small changes in the process parameters without altering the physical properties of the original drug substance and polymer.