Thermogravimetric study of uranium phosphates

The thermal decomposition of (UO₂)₃(PO₄)₂ and U(HPO₄)₂ ·xH₂O in the temperature range 25–1600?, was investigated. (UO₂)₃(PO₄)₂ decomposed first to 1/3[U₃O₈ + 3U₂O₃P₂O₇] and then to U₃O₅P₂O₇ before a loss of phosphorus was observed above 1350?. Decomposition in air and in inert atmospheres was nearly identical. Reduction with H₂ or with carbon black in argon gave U₃O₅P₂O₇ and [UO₂ + + (UO)₂P₂O₇] before pure UO₂ was formed. U(HPO₄)₂ ·xH₂O decomposed to UP₂O₇ in argon. It oxidized partly in air before the same product was obtained. The high temperature stability of UP₂O₇ and U₃(PO₄)₄ was also investigated.     

Study of structural parameters on the adsorption selectivity of a molecularly imprinted polymer

This work was focused on the influence of match degree of structure parameters i.e. molecular size, volume and polarity (denoted as R_d, V_d and P_d) between imprinted cavities in Qu-MIP and Xn on the adsorption selectivity. The results presented that the influence of R_d on the adsorption selectivity was the largest and the most regular, while the influence of P_d was the smallest and the most irregular. Besides, the influence degree of V_d was decreased in general with the increase of R_d. However, as R_d was in the threshold of [0.99, 1.02], V_d would rise to the major influence factor. Furthermore, utilizing data obtained from experiment, the influence authority of R_d, V_d and P_d on the adsorption selectivity was calculated theoretically through multiple linear regression and principal component analysis of IBM SPSS Statistics 20, and results showed the authority order was R_d, V_d and P_d at any circumstance despite the value was different, which was in accordance with the result we directly inducted from the experiment.     

A study of the selenites of cerium

The solubilities of the systems CeO₂-SeO₂-H₂O and Ce₂O₃-SeO₂-H₂O were studied at 100°C. The field of crystallization of Ce(SeO₃)₂ was established in the system CeO₂-SeO₂-H₂O, and fields of crystallization of Ce₂(SeO₃)₃ and Ce₂(SeO₃)₃H₂SeO₃ were established in the system Ce₂O₃-SeO₂-H₂O. The compound obtained were identified by means of chemical, X-ray and derivatograph analysis. The mechanism of thermal dissociation of Ce(SeO₃)₂, Ce₂(SeO₃)₃ and Ce₂(SeO₃)₃·H₂SeO₃ was studied. This revised version was published online in August 2006 with corrections to the Cover Date.     

Synthesis and structures of cis -WO2 complexes with 2,3-dihydroxynaphthalene

{Na(OCH₃)[H₃N(CH₂)₂NH₂]₂}[WO₂(C₁₀H₆O₂)₂] (1) was obtained by the reaction of Na₂WO₄ · 2H₂O with 2,3-dihydroxynaphthalene and ethylenediamine. [H₂N(CH₂)₃NH₃]₂[WO₂(C₁₀H₆O₂)₂] (2) was synthesized by the reaction of Na₂WO₄ · 2H₂O with 2,3-dihydroxynaphthalene and 1,3-propylenediamine. Complex 1 was a one-dimensional chain-like structure and the Na atom is in the structure, while complex 2 was a discrete monomer without Na in its structure. The two complexes were synthesized in the same reaction conditions, except that protonated ethylenediamine was used in reaction 1, but 1,3-propylenediamine in reaction 2.     

富氧条件下乙炔选择催化还原NOx

Acetylene as a reducing agent of metal exchanged HY catalysts, for selective catalytic reduction of NO in the reaction system of 0.16% NO, 0 （C2H2-SCR） was investigated over a series 08% C2H2, and 9.95% O2 （volume percent） in He. 75% of NO conversion to N2 with hydrocarbon efficiency about 1.5 was achieved over a Ce-HY catalyst around 300 ℃. The NO removal level was comparable with that of selective catalytic reduction of NOx by C3H6 reported in literatures, although only one third of the reducing agent in carbon moles was used in the C2H2-SCR of NO. The protons in zeolite were crucial to the C2H2-SCR of NO, and the performance of HY in the reaction was significantly promoted by cerium incorporation into the zeolite. NO2 was proposed to be the intermediate of NO reduction to N2, and the oxidation of NO to NO2 was rate-determining step of the C2H2-SCR of NO over Ce-HY. The suggestion was well supported by the results of the NO oxidation with O2, and the C2H2 consumption under the conditions in the presence or absence of NO.     

Kinetic Analysis of the Decomposition of Chelates of Di-alkyldithiocarbamate of Cd(II)

The thermal decomposition kinetics of the solid complexes Cd(S₂ CNR₂ )₂ , where R =C₂ H₅ , n -C₃ H₇ , n -C₄ H₉ or iso -C₄ H₉ , was studied by using isothermal and non-isothermal thermogravimetry. The superimposed TG/DTG/DSC curves revealed that thermal decomposition reactions occur in the liquid phase. The kinetic model that best fitted the experimental isothermal TG data was the one-dimensional phase-boundary reaction-controlled process R₁ . The thermal analysis data suggested the thermal stability sequence Cd(S₂ CNBuⁿ ₂ )₂ >Cd(S₂ CNPrⁿ ₂ )₂ >Cd(S₂ CNBuⁱ ₂ )₂ >Cd(S₂ CNEt₂ )₂ , which accords with the sequence of stability of the apparent activation energies. This revised version was published online in July 2006 with corrections to the Cover Date.     

Electrochemical Studies on Effects of Psychostimulants,Opioids and Alcohol Intake Towards Level of Hydrogen Peroxide in the Brain Striatum

Hydrogen peroxide (H₂O₂) was the main types of many peroxides produced in living mammalian cells that consumed oxygen. In the brain, the main source of H₂O₂ was the superoxide dismutase (SOD)‐catalyzed reaction in mitochondria. However, the level of H₂O₂ would be elevated through administration of control drugs and alcohol by dopamine metabolism of monoamine oxidase. In this study, a H₂O₂ microsensor was used to investigate the level of H₂O₂ in the brain striatum after administration of methamphetamine (MAP), morphine (MrP) or ethanol (Eth). The placement of microsensor in the brain was done at coordinates A/P 1.1 from bregma, M/L+2.6 and D/V‐1.5. A working potential of +0.05 V vs. Ag/AgCl was applied. The H₂O₂ concentration was measured direct from the current generated by its catalytic reaction at the electro active surface of the electrode. A significant increase of H₂O₂ level was observed after 7 successive injections of the controlled drugs or alcohol. The initial measurement of H₂O₂ is essential as excess dosage of H₂O₂ during treatment will contribute to the formation of neurotoxin oxygenated radicals. The H₂O₂ was the precursor of O_2? and OH radicals. Thus, this study provided a mean to monitor H₂O₂ level in the brain.     

Metallocene systems in propylene polymerization: Effect of triisobutylaluminum and lewis bases on the behavior of catalysts and properties of polymers

For two stereospecific metallocene catalysts, namely, syndiospecific Ph₂CCpFluHfMe₂ and isospecific rac-Me₂SiInd₂ZrMe₂, the introduction of Lewis bases into a reaction medium was shown to promote a marked rise in the efficiency of catalytic systems. In the case of the syndiospecific metallocene, the maximum effect of the base (a 10-fold increase in activity) was achieved using the (Ph₂CCpFluHfMe₂ + Ph₃N)/CPh₃B(C₆F₅)₄ catalytic system in the presence of Al-i-Bu₃ at a molar ratio of Al: Hf: B: N = 15: 1: 1: 1. When the polymerization of propylene was carried out in the presence of Al-i-Bu₃ and Ph₃N, an elastomeric stereoblock syndio/atactic polypropylene was produced. For the (rac-Me₂SiInd₂ZrMe₂ + amine)/CPh₃B(C₆F₅)₄ catalytic system, a 15-to 30-fold increase in activity was observed upon introduction of amines of the aniline type: Me₂NPh, Me-n-BuNPh, and NPh₃.     

Rates of copolymerization of acrylonitrile and ethylenesulfonic acid

Use was made of differential absorption in the near-infrared region to follow the rates of copolymerization of acrylonitrile (AN, M₁) with ethylenesulfonic acid (ESA, M₂) in aqueous zinc chloride solution. The concentrations of the monomers were followed separately and simultaneously. It was found experimentally that the ratios d log [M₁]/dt and d log [M₂]/dt were each constant. This was interpreted to mean that the product of the reactivity ratios of the two monomers (r₁,r₂) is unity and that the ratio of termination rate constants is equal to the propagation reactivity ratio. It was found that d log [M₁]/d log [M₂] = r₁ = 4.5₂. This value is in fair agreement with polymer composition data obtained independently. In the Q—e system the equality r₁r₂ = 1 is equivalent to the monomers having equal e values. Thus, in the AN—ESA system, P₁/P₂ = k₁₁/k₂₁ = k₁₂/k₂₂ = k_1T/k_2T, where P₁ is the resonance constant of polymer radicals ending in units of M₁; and k₁₁, k₁₂, and k_1T are the rate constants involving the reaction of this radical with M₁, M₂, and T (terminating agent), respectively. A gel effect was not observed even at M₁ conversions as high as 88%.     

石墨型氮化碳对氨硼烷放氢性能的影响

利用石墨型氮化碳(C₃N₄)和氨硼烷(NH₃BH₃,AB)球磨制备了AB-C₃N₄体系,发现C₃N₄的加入使AB放氢反应温度明显降低,但是副产物氨气浓度有所升高. 因此,利用LiBH₄改性的C₃N₄(LC₃N₄)同AB球磨合成出了AB-LC₃N₄体系,并采用X射线衍射、程序升温脱附-质谱联用、热重-差热分析及核磁共振等技术考察了该体系的脱氢性能. 结果表明,由于LC₃N₄的加入,AB的放氢反应温度明显降低,放氢反应速率加快,放氢诱导期缩短,同时抑制了副产物无机苯的生成. 另外,C₃N₄的化学修饰也降低了AB-LC₃N₄放氢过程中生成氨气的浓度. 动力学分析和核磁共振结果表明,AB-LC₃N₄分解过程依然遵循NH₃BH₂NH₃BH₄诱导的氨硼烷自分解机理.     

不同结构的磷酸盐对凝胶体系中草酸钙晶体物相和相组成的影响

泌尿系结石的形成是一种病理性生物矿化过程，不同地区的结石发病率在3％～15％之间。且50％(美国)至80％(中国)的人会复发。结石中约70％以上为草酸钙(CaC2O4)结石。CaC2O4结石的形成与其热力学(过饱和度)和动力学(成核、生长和聚集)因素有关。由于结石患者尿液和正常人尿液中     

Studies of Photon Correlation Spectroscopy of the Microemulsion of H2O/Tween 80/Benzene Derivative

The microemulsion of the H₂O/Tween 80/benzene derivative (C₆H₆, CH₃C₆H₅, NO₂C₆H₅ and NH₂C₆H₅) was investigated by the technique of Photon correlation spectroscopy. Autocorrelation data were measured at 90 scattering angle and were analyzed by using a quadratic fit and linear fit. The quadratic fit was found to describe all Properties better than the linear fit, and thus the linear fit was limited to the region of very short sampling time. When the amount of benzene derivative added to the sample solution was lower than V_max, the Z-average mean radius, <r>_z, and the polydispersit Y, μ2/Γ², increased as the amount of benzene derivative was increased. When the amount of benzene derivative was larger than V_max, the aqueous and organic phases separated and the <r> z, and μ₂/Γ² of all phases remained constant. Emulsification did not occur in the organic phase of the H₂O/Tween 80/aniline system. When we adjusted the Tween 80 concentration, it was found that <r>z and μ₂/Γ² decreased as the Tween 80 concentration increased.     

Preparation of MoO3/g-Al2O3 catalyst by the reaction of a-boehmite with MoO3/H2O slurry - dual role of MoO3 as active phase and texture stabilizer during calcination

Summary Catalyst MoO₃/g-Al₂O₃ was prepared by the reaction of a-boehmite with molybdic acid in slurry MoO₃/H₂O followed by calcination. The deposited MoO₃ functioned as thermal stabilizer and inhibited sintering of Al₂O₃ phase during calcination. After calcination at 550 and 650^oC the surface area of Al₂O₃ obtained from a-boehmite was 207 and 172 m² g^-1, respectively, and of MoO₃/Al₂O₃ obtained from MoO₃/a-boehmite was 323 and 285 m² g^-1, respectively. On the other hand, molybdic acid did not work as peptization agent and the mechanical strength of MoO₃/Al₂O₃ was not higher than of Al₂O₃. The catalyst was sulfided and its activity in thiophene hydrodesulfurization was tested; it exhibited about the same activity as reference industrial MoO₃/Al₂O₃ catalyst.     

Role of added Lewis base and alkylaluminum halide on living cationic polymerization of vinyl ether

In the living cationic polymerization of isobutyl vinyl ether (IBVE) by the CH₃CH (OiBu) OCOCH₃ ( 1 )/EtAlCl₂ initiating system in the presence of the added base in hexane at +40°C, the stability of the initiating system 1 /EtAlCl₂, which form initiating species CH₃CH^⊕ (OiBu) derived from 1 , was investigated. In the presence of the Lewis base such as ethyl acetate or 1,4-dioxane, the active species was stable for 300 min even at +40°C in the absence of IBVE, and the living polymers were quantitatively obtained by adding IBVE. However, the active species was partly consumed by side reactions during the standing time for 60 min in the presence of a less basic additive such as ethyl benzoate, and about 50% of the active species was deactivated in the presence of methyl chloroacetate. Consequently, in the case of a less basic additive such as methyl chloroacetate (which was effective for the fast living polymerization), it can be seen that the careful selection of polymerization conditions was required. The living polymerization rate was dependent on the second order of EtAlCl₂ concentration. EtAlCl₂ induced the cleavage of 1 into CH₃CH^⊕ (OiBu) and EtAl^?Cl₂(OCOCH₃), and the reactivity of CH₃CH^⊕ (OiBu) and propagating carbocation may be controlled by EtAl^?Cl₂(OCOCH₃) with the aid of other EtAlCl₂. Et_1.5AlCl_1.5 exists as a bimetallic complex of EtAlCl₂ and Et₂AlCl, and it is expected that the polymers having a bimodal molecular weight distribution will be obtained due to two kinds of counteranions coming from EtAlCl₂ and Et₂AlCl. However, in the cationic polymerization of IBVE by 1 /Et_1.5AlCl_1.5 in the presence of ethyl acetate, the living polymer exhibiting a unimodal and very narrow molecular weight distribution was obtained. Thereby, it was suggested that the counteranions, EtAl^?Cl₂(OCOCH₃) and Et₂Al^?Cl(OCOCH₃), exchange rapidly with each other. © 1994 John Wiley & Sons, Inc.     

LixNi0.5Co0.5O2的态密度计算及电化学性能研究

>为获得综合性能更好的锂离子二次电池正极材料, 分析了Co掺杂对Li_xNiO₂电化学性能的影响. 采用密度泛函DFT理论对Li_xNiO₂和Li_xNi_0.5Co_0.5O₂的平均放电电压和态密度进行了计算. 同时, 用共沉淀法制备了Li_xNiO₂和Li_xNi_0.5Co_0.5O₂锂离子二次电池正极材料, 并对其进行了XRD结构分析和恒流充放电测试. 实验和计算结果表明: 随锂离子嵌入正极(电池放电), 电池的电压逐渐降低, 材料的态密度峰向低能量方向移动; 与Li_xNiO₂相比, Li_xNi_0.5Co_0.5O₂的电压平台相对较高(当0.25≤x≤0.5), 而且在Li^＋嵌/脱时, Li_xNi_0.5Co_0.5O₂的结构变化相对较小; Co离子的掺入, 减小了NiO₆八面体的畸变度, 使材料的电化学稳定性得以提高. 在钴掺杂镍酸锂体系中, NiO₆和CoO₆具有相互的稳定作用.     

Complexation of poly(ethylene glycol) with some salts of alkali-earth metals

The interaction of poly(ethylene glycol) with some salts of alkali-earth metals (Mg(ClO₄)₂, BaCl₂, SrCl₂, SrBr₂ and CaCl₂) in methanolic solutions was investigated by electroconductivity, viscometry, X-ray diffractometry and NMR. It was established that the conformation of macromolecules is strongly changed in the presence of Mg(ClO₄)₂. Chlorides and bromides of alkali-earth metals have a weak influence on macromolecule size. The formation of amorphous complexes in the PEG–Mg(ClO₄)₂ system and crystalline complexes in PEG–chloride systems of alkali-earth metals was shown.     

碱金属硫酸盐-SDS-PEG三维浓度变化对SDS的束缚胶束聚集数的影响

采用稳态荧光猝灭技术测定了三种碱金属(Li, Na或K)硫酸盐-SDS-PEG三元体系中SDS(十二烷基硫酸钠)的束缚胶束聚集数N_b, 考察了SDS浓度c、碱金属硫酸盐浓度c_e及PEG(聚乙二醇)浓度c_p变化时SDS的N_b的变化规律. 对SDS的N_b数据进行二次响应面分析, 得知SDS的N_b是c的线性增大函数、c_e的对数函数以及c_p的反比例函数, 据此对SDS的N_b实验值建立含二次交互作用项的函数表达式. 按上述表达式进行回归, 得到相应于Li₂SO₄, Na₂SO₄或K₂SO₄体系的系数a₀～a₈. 据此计算得到SDS的N_b预期值并与实验值进行比较, 其间的绝对误差在3以内, 相对误差在4%以内. 该结果为用SDS的N_b 预测表面活性剂-大分子软模板的尺寸和化学微环境、并用于调控所制备的金属纳米粒子的大小提供依据.     

Study of the stability of solid polyoxometalate Mo72Fe30 with a buckyball structure

Samples of polyoxometalate Mo₇₂Fe₃₀: [Mo₇₂Fe₃₀O₂₅₂(CH₃COO)₁₂{Mo₂O₇(H₂O)}₂ {H₂Mo₂O₈(H₂O)}(H₂O)₉₁] · ??150H₂O with a buckyball structure, which can be both crystalline and amorphous, were synthesized. It was shown that such samples can be studied by neutron diffraction. The stability of Mo₇₂Fe₃₀ to heating and UV light exposure (in poly(vinyl alcohol) and polyvinylpyrrolidone films) was studied by IR, EPR, and electronic absorption spectroscopy; thermal analysis; and mass spectrometry. Mo₇₂Fe₃₀ was found to be less stable to heating and irradiation in a poly(vinyl alcohol) film as compared with the related polyoxometallate Mo₁₃₂ free of iron. The sorption properties of Mo₇₂Fe₃₀ to organic vapors and its stability under sorption conditions were studied. It was demonstrated that, in addition to sorption, organic substances cause the destruction of buckyballs.     

Kinetics of the iodine transfer polymerization of vinylidene fluoride

The kinetics of the iodine transfer polymerization (ITP) of vinylidene fluoride (VDF) was achieved in the presence of three different chain‐transfer agents (CTAs): 1‐iodoperfluorohexane (C₆F₁₃I), 1‐iodo‐2H,2H‐perfluorooctane (C₆F₁₃CH₂CF₂I), and 1,1,2,2‐tetrafluoro‐3‐iodopropane (HCF₂CF₂CH₂I). ITPs of VDF carried out in the presence of C₆F₁₃I and C₆F₁₃CH₂CF₂I showed the following: (1) a linear increase in DP_n versus α_VDF, which evidenced the controlled character of ITP, although the polydispersity indices were slightly high (ca 1.5), and (2) theoretical DP_n values close to the targeted ones. In contrast, neither of these statements was observed for the ITP of VDF in the presence of HCF₂CF₂CH₂I achieved under the same conditions, even if the synthesized oligomers could be reactivated. Although the C_Tr values of C₆F₁₃I and C₆F₁₃CH₂CF₂I were close (i.e., 7.7 at 75 °C), that of HCF₂CF₂CH₂I was lower (0.3 at 75 °C). The percentages of ? CF₂I and ? CH₂I functionalities were also assessed, and in the course of the reaction, a reduction of ? CF₂I end groups was noted. Then, the mechanism of the ITP of VDF was proposed. © 2006 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 44: 5763–5777, 2006     

超临界条件下离子液体催化苯与丙烯烷基化的反应机理研究

用FT-IR和¹H NMR分析KOH无水乙醇溶液滴定前后的盐酸三乙胺无水乙醇溶液, 发现(C₂H₅)₃NHCl中的H具有显著的质子酸性, 且在滴定过程中有KCl生成, 滴定后的¹H NMR谱中δ 7.3处的谱峰完全消失. 将合成的(C₂H₅)₃NHCl/AlCl₃离子液体脱水, 在超临界条件下催化全氘代苯与丙烯的烷基化. 用同位素取代法, 研究了反应机理. 结果表明, 脱水后的离子液体仍然可以催化烷基化反应, 液体产物的GC-MS分析结果支持正碳离子机理. 对比反应前后离子液体的¹H NMR谱图发现, 反应后离子液体中盐酸三乙胺中与N相连H的谱峰强度较反应前降低了80.12%, 可能是引发反应消耗了这部分H.