Perovskite-type SrTi1−xNbx(O,N)3 compounds: Synthesis, crystal structure and optical properties

The synthesis, crystal structure, thermal stability and absorbance spectra of perovskite-type oxynitrides with the general formula SrTi_1−xNb_x(O,N)₃ (x=0.05, 0.10, 0.20, 0.50, 0.80, 0.90, 0.95) have been investigated. Oxide samples were prepared by a polymerized complex synthesis route and post-treated under ammonia at 850 °C for 24 h to substitute nitrogen for oxygen. Synchrotron X-ray powder diffraction (XRD) evidenced that the mixed oxide phases were all transformed into oxynitrides with perovskite-type structure during a thermal ammonolysis. SrTi_1−xNb_x(O,N)₃ with compositions x≤0.80 crystallized in a cubic and samples with x≥0.90 in a tetragonal structure. The Rietveld refinement indicated a continuous enlargement of the lattice parameters towards higher niobium content of the samples. Thermogravimetric analysis (TGA) and hotgas extraction revealed the dependence of the nitrogen incorporation upon the degree of niobium substitution. It showed that more nitrogen was detected in the samples with higher niobium content. Furthermore, TGA disclosed stability for all oxynitrides at T≤400 °C. Diffuse reflectance spectroscopy indicated a continuous decrease of the band gap’s width from 3.24 eV (SrTi_0.95Nb_0.05 (O,N)₃) to 1.82 eV (SrTi_0.05Nb_0.95(O,N)₃) caused by the increasing amount of nitrogen towards the latter composition.     

Structure and phase composition of nanocrystalline Ce1−xLuxO2−y

The microstructure and phase stability of nanocrystalline mixed oxide Lu_xCe_1−xO_2−y (x=0-1) are described. Nano-sized (3-4 nm) oxide particles were prepared by the reverse microemulsion method. Morphological and structural changes upon heat treatment in an oxidizing atmosphere were studied by transmission electron microscopy (TEM), X-ray diffraction (XRD), Raman and Yb³⁺ emission spectroscopy, the latter ion being present as an impurity in the Lu₂O₃ starting material. Up to 950 °C, the samples were single phase, with structure changing smoothly with Lu content from fluorite type (F) to bixbyite type (C). For the samples heated at 1100 °C phase separation into coexisting F- and C-type structures was observed for 0.35<x<0.7. It was also found that addition of Lu strongly hinders the crystallite growth of ceria during heat treatment at 800 and 950 °C.     

Charge compensation and oxidation in NaxCoO2−δ and LixCoO2−δ studied by XANES

A comparative study on the oxidation and charge compensation in the A_xCoO_2−δ systems, A=Na (x=0.75, 0.47, 0.36, 0.12) and Li (x=1, 0.49, 0.05), using X-ray absorption spectroscopy at O 1s and Co 2p edges is reported. Both the O 1s and Co 2p XANES results show that upon removal of alkali metal from A_xCoO_2−δ the valence of cobalt increases more in Li_xCoO_2−δ than in Na_xCoO_2−δ. In addition, the data of O 1s XANES indicate that charge compensation by oxygen is more pronounced in Na_xCoO_2−δ than in Li_xCoO_2−δ.     

Chemical shifts of atomic core levels and structure of K1−xTi1−xSbxOPO4, x=0-0.23, solid solutions

Antimony-doped K_1−xTi_1−xSb_xOPO₄, x=0.23, crystals have been prepared by spontaneous nucleation from the flux in the quaternary system K₂O-TiO₂-P₂O₅-Sb₂O₅. Crystal structure observation with TEM method reveals the presence of superstructure ordering. Core level electronic parameters have been studied by X-ray photoelectron spectroscopy. Strong effect of Sb doping has been detected for inner shells of Ti⁴⁺ ions. Prominent decreasing of the binding energy difference Δ(O 1s-Ti 2p_3/2) correlates with the shortening of mean oxide bond length L(Ti−O) at x=0.23 that suggests increased ionicity of Ti−O bonds in K_1−xTi_1−xSb_xOPO₄ solid solutions.     

New synthesis of excellent visible-light TiO2−xNx photocatalyst using a very simple method

An excellent visible-light-responsive (from 400 to 550 nm) TiO_2−xN_x photocatalyst was prepared by a simple wet method. Hydrazine was used as a new nitrogen resource in this paper. Self-made amorphous titanium dioxide precursor powders were dipped into hydrazine hydrate, and calcined at low temperature (110 °C) in the air. The TiO_2−xN_x was successfully synthesized, following by spontaneous combustion. The photocatalyst was characterized by X-ray diffraction (XRD), Brunauer-Emmett-Teller (BET), transmission electron microscope (TEM), UV-Vis diffuse reflectance spectrometer (DRS), and X-ray photoelectron spectroscopy (XPS). Analysis of XPS indicated that N atoms were incorporated into the lattice of the titania crystal during the combustion of hydrazine on the surface of TiO₂. Ethylene was selected as a target pollutant under visible-light excitation to evaluate the activity of this photocatalyst. The newly prepared TiO_2−xN_x photocatalyst with strong photocatalytic activity and high photochemical stability under visible-light irradiation was firstly demonstrated in the experiment.     

Phase segregation in the Gd1−xSrxFeO3−δ series

Gd_1−xSr_xFeO_3−δ ferrites have been studied by means of X-ray powder diffraction in the whole composition range. Single-phase solid solution is found for x<0.09 and for x>0.63. At intermediate Sr content, phase segregation takes place. Compounds with x?0.05 crystallize in the orthorhombic structure, space group Pbnm. Oxygen-deficient Gd_1−xSr_xFeO_3−δ with x?2/3 are cubic or nearly cubic. The oxygen vacancies stabilize the cubic phase for x=2/3 whereas highly oxidized samples show an orthorhombic distortion, which has not been observed earlier. Magnetic and electrical properties have been measured for the single-phase solid solutions. Gd_1−xSr_xFeO_3−δ compounds with x?2/3 order antiferromagnetically below ∼100 K. In the paramagnetic region, their susceptibility follows the Curie-Weiss law in all but SrFeO_2.96 compound. These ferrites show semiconducting behavior in the electrical transport likely related to atomic disorder. We find that the conductivity activation energy becomes larger by increasing either the Gd content or the oxygen vacancies.     

Structural and magnetic properties of Zn1−xSbxCr2−x/3Se4 (x=0.11, 0.16 and 0.20) single crystals

Single crystals of Zn_1−xSb_xCr_2−x/3Se₄ based on the ZnCr₂Se₄ spinel, which is known to exhibit interesting magnetic and electronic transport properties, have been prepared by solid state reaction from the appropriate selenides. Three compounds of different Sb content (x=0.11, 0.16, and 0.20) were studied by X-ray diffraction, X-ray photoelectron scattering technique and macroscopic magnetic measurements with the aim to determine (i) stability of the cubic symmetry and (ii) influence of the Sb admixture on the magnetic properties. The results show that the Sb³⁺ and Zn²⁺ ions share the tetrahedral sites in the spinel structure, while the Cr³⁺ions carrying magnetic moments, are located in the octahedral sites. The X-ray photoelectron spectroscopy (XPS) data indicate that in this series of compounds the chromium ions have a 3d³ electronic configuration. The three samples studied order antiferromagnetically at low temperatures, with the magnetic characteristics being hardly altered with respect to those reported for the parent ZnCr₂Se₄ compound.     

Synthesis of layered cathode material Li[CoxMn1−x]O2 from layered double hydroxides precursors

Cathode materials Li[Co_xMn_1−x]O₂ for lithium secondary batteries have been prepared by a new route—precursor method of layered double hydroxides (LDHs). In situ high-temperature X-ray diffraction (HT-XRD) and thermogravimetric analysis coupled with mass spectrometry (TG-MS) were used to monitor the structural transformation during the reaction of CoMn LDHs and LiOH·H₂O: firstly the layered structure of LDHs transformed to an intermediate phase with spinel structure; then the distortion of the structure occurred with the intercalation of Li⁺ into the lattice, resulting in the formation of layered Li[Co_xMn_1−x]O₂ with α-NaFeO₂ structure. Extended X-ray absorption fine structure (EXAFS) data showed that the Co-O bonding length and the coordination number of Co were close to those of Mn in Li[Co_xMn_1−x]O₂, which indicates that the local environments of the transitional metals are rather similar. X-ray photoelectron spectroscopy (XPS) was used to measure the oxidation state of Co and Mn. The influences of Co/Mn ratio on both the structure and electrochemical property of Li[Co_xMn_1−x]O₂ have been investigated by XRD and electrochemical tests. It has been found that the products synthesized by the precursor method demonstrated a rather stable cycling behavior, with a reversible capacity of 122.5 mAh g⁻¹ for the layered material Li[Co_0.80Mn_0.20]O₂.     

Evolution of structure and magnetic properties in electron-doped double perovskites, Sr2−xLaxMnWO6 (0?x?1)

Powder neutron and X-ray diffraction studies show that the double perovskites in the region 0?x?1 exhibit two crystallographic modifications at room temperature: monoclinic P2₁/n and tetragonal I4/m, with a boundary at 0.75<x<0.9. Magnetic susceptibility measurements indicate that for x=0 and 0.5 Sr_2−xLa_xMnWO₆ orders antiferromagnetically (AFM) at 15 and 25 K, respectively, for 0.75?x<1.0, a contribution of weak ferromagnetism (FM), probably due to canted-AFM order, increases with increasing x. The end point compound SrLaMnWO₆ shows the strongest FM cluster effect; however, no clear evidence of magnetic order is discernable down to 4.2 K. X-ray absorption spectroscopy (XAS) confirms Mn²⁺ and mixed-valent W^6+/5+ formal oxidation states in Sr_2−xLa_xMnWO₆.     

Visible light-sensitive yellow TiO2−xNx and Fe-N co-doped Ti1−yFeyO2−xNx anatase photocatalysts

Nitrogen substituted yellow colored anatase TiO_2−xN_x and Fe-N co-doped Ti_1−yFe_yO_2−xN_x have been easily synthesized by novel hydrazine method. White anatase TiO_2−δ and N/Fe-N-doped samples are semiconducting and the presence of ESR signals at g ∼1.994-2.0025 supports the oxygen vacancy and g∼4.3 indicates Fe³⁺ in the lattice. TiO_2−xN_x has higher conductivity than TiO_2−x and Fe/Fe-N-doped anatase and the UV absorption edge of white TiO_2−x extends in the visible region in N, Fe and Fe-N co-doped TiO₂, which show, respectively, two band gaps at ∼3.25/2.63, ∼3.31/2.44 and 2.8/2.44 eV. An activation energy of ∼1.8 eV is observed in Arrhenius log resistivity vs. 1/T plots for all samples. All TiO₂ and Fe-doped TiO₂ show low 2-propanol photodegradation activity but have significant NO photodestruction capability, both in UV and visible regions, while standard Degussa P-25 is incapable in destroying NO in the visible region The mid-gap levels that these N and Fe-N-doped TiO₂ consist may cause this discrepancy in their photocatalytic activities.     

Structure refinement, dielectric, pyroelectric and Raman characterizations of Ba1−xLax(1−y)/2Euxy/2Nax/2TiO3 solid solution

The perovskite-type oxides Ba_1−xLa_x(1−y)/2Eu_xy/2Na_x/2TiO₃ (0?x?0.5 and xy=0.04) were synthesized and characterized by X-ray diffraction as well as dielectric measurements and Raman spectroscopy. The crystal structure of these ceramics has been determined by the Rietveld refinement powder X-ray diffraction data at room temperature. These compounds crystallize at room temperature in tetragonal space group P4mm for 0?x?0.1 and in the cubic group for 0.2?x?0.5. The phase transition temperature T_C (or T_m) decreases as x content increases. The degree of diffuseness of the phase transition is more pronounced for higher x content, implying the existence of a composition-induced diffuse phase transition of the ceramics with x?0.1. The evolution of the Raman spectra was studied as a function of various compositions at room temperature. The polarization state was checked by pyroelectric measurements.     

Probing the local structure of crystalline ZITO: In2−2xSnxZnxO3 (x≤0.4)

The local structure of In₂O₃ cosubstituted with Zn and Sn (In_2−2xSn_xZn_xO₃, x≤0.4 or ZITO) was determined by extended X-ray absorption fine structure (EXAFS) for x=0.1, 0.2, 0.3 and 0.4. The host bixbyite In₂O₃ structure is maintained up to the enhanced substitution limit (x=0.4). The EXAFS spectra are consistent with random substitution of In by the smaller Zn and Sn cations, a result that is consistent with the “good-to-excellent” conductivities reported for ZITO.     

Structural characterization, magnetic behavior and high-resolution EELS study of new perovskites Sr2Ru2−xCoxO6−δ (0.5?x?1.5)

New oxides of general formula Sr₂Ru_2−xCo_xO_6−δ (0.5?x?1.5) have been synthesized as polycrystalline materials and characterized structurally by X-ray diffraction. For 0.5?x<0.67 the orthorhombic, Pnma, perovskite structure of the end member, SrRuO₃, is found. At x=0.67 a phase separation into an Ru-rich Pnma phase and a Co-rich I2/c phase occurs. The I2/c form is also found for x=1.0 but another orthorhombic phase, Imma, obtains for x=1.33 and 1.5. Reductive weight losses indicate negligible oxygen non-stoichiometry, i.e., δ∼0, for all compositions even those rich in Co. High-resolution electron energy loss spectroscopy (EELS) indicates that cobalt is high-spin Co³⁺ or high-spin Co⁴⁺ for all x. Appropriate combinations of Ru⁴⁺, Ru⁵⁺, HS Co³⁺ and HS Co⁴⁺ are proposed for each x which are consistent with the observed Ru(Co)-O distances. Significant amounts of Co⁴⁺ must be present for large x values to explain the short observed distances. Broad maxima in the d.c. susceptibilities are found between 78 and 97 K with increasing x, along with zero-field-cooled (ZFC) and field-cooled (FC) divergences suggesting glassy magnetic freezing. A feature near 155 K for all samples indicates a residual amount of ferromagnetic SrRuO₃ not detected by X-ray diffraction.     

Selective substitution of vanadium for molybdenum in Sr2(Fe1−xVx)MoO6 double perovskites

The crystal and magnetic structures of Sr₂(Fe_1−xV_x)MoO₆ (0.03?x?0.1) compounds are refined by alternately using X-ray powder diffraction (XRD) and neutron powder diffraction (NPD) data collected at room temperature. The refinement results reveal that the V atoms selectively occupy the Mo sites instead of the Fe sites for x?0.1. The 3d/4d cation ordering decreases with the increase of the V content. Slight distortions in the lattice and metal octahedra are shown at 300 K, and the distortions increase at 4 K. The magnetic structure at 4 K can be modeled equally well with the moments aligning along [001], [110] or [111] directions. The total moments derived from the NPD data for the [110] and [111] direction models agree well with the magnetic measurements, whereas the [001] model leads to a smaller total moment. Bond valence analysis indicates that Sr ions are properly located in the structure and Mo ions are compatible with both the Fe sites and the Mo sites. The electronic effects are suggested to be responsible for the selective occupation of the V on the Mo sites due to the different distortions of the FeO₆ and MoO₆ octahedra.     

Structural and magnetic properties of nanocrystalline Ni1−xCuxFe2O4 prepared through oxalates precursors

Spinel ferrites of the composition Ni_1−xCu_xFe₂O₄ (x = 0.0-1.0) have been prepared through the thermal decomposition of their respective impregnated oxalates. The oxalate decomposition process was followed using differential thermal analysis-thermogravimetry techniques (DTA-TG). The synthesized nanocrystallites were characterized using X-ray diffraction (XRD), transmission electron microscopy (TEM) and Fourier transform infrared spectroscopy (FT-IR). The formation of single-phase ferrite is confirmed by XRD. Tetragonal deformation is observed for samples with composition x ? 0.7. The increase in the lattice parameter with increasing Cu content can be explained based on the relative ionic radius. The TEM image shows spherically non-agglomerated particles with an average crystallite size that agrees well with that obtained from XRD. FT-IR studies show two absorption bands (ν₁ and ν₂) near to 600 and 400 cm⁻¹ for the tetrahedral and octahedral sites, respectively. The hysteresis measurements were done using a vibrating sample magnetometer (VSM). The cation distribution in these compositions is calculated from the magnetization data. With increasing Cu content, the saturation magnetization (M_s) was observed to decrease while the coercivity (H_c) increases. The possible reasons responsible for the composition dependence of the magnetic properties were discussed. The Curie temperature, measured through the temperature dependence of the dc-molar magnetic susceptibility, was found to decrease with increasing Cu content.     

A structural study of the perovskite series Ca1−xNaxTi1−xTaxO3

Compounds in the solid solution series Ca_1−xNa_xTi_1−xTa_xO₃ were synthesized at 1300 °C, followed by annealing at 850 °C or 800 °C with quenching and/or slow cooling to room temperature. Rietveld refinement of their powder X-ray diffraction patterns show that all compounds are single-phase ternary perovskites which adopt the space group Pbnm (a≈b≈√2a_p; c≈2a_p; Z=4) at ambient conditions. The unit cell parameters and cell volumes of the compounds increase regularly with increasing values of x. The coordination of the A-site cations changes throughout the series from eight for CaTiO₃ to nine for NaTaO₃. Compounds with 0?x ?0.4 have A-site cations in eight fold coordination, whereas the coordination of those with 0.4<x<0.9 is ambiguous. Analysis of the crystal chemistry of the compounds shows that the change in coordination at x=0.4 is related to the departure of the B-site cations from the second coordination sphere of the A-site cations, as in compounds with x>0.4 the A-^IIO distances become less than the A-B intercation distances. Contemporaneous with these coordination changes, the tilt angles of the BO₆ polyhedra decrease with increasing values of x. This solid solution series is unusual in that these structural and coordination changes occur regardless that Goldschmidt tolerance factors remain essentially constant at approximately 0.89, and observed tolerance factors, assuming eight fold coordination of the A-site cations, range only from 0.91 to 0.93 (0?x?0.8).     

Order-disorder transition and valence state of ytterbium in YbAuxGa2−x (0.26≤x≤1.31)

The intermetallic compounds YbAu_xGa_2−x (0.26≤x≤1.31) were synthesized by melting of elemental components and subsequent annealing. The crystal structure of YbAu_1.04Ga_0.96 was investigated using single-crystal X-ray diffraction data: structure type TiNiSi, space group Pnma, a=7.1167(3) Å, b=4.5019(3) Å, c=7.7083(3) Å, R_F=0.028 for 27 variables and 441 reflections. At 600 °C this compound is described as partially substituted TiNiSi type and shows a homogeneity range around the equiatomic composition YbAu_xGa_2−x (0.94≤x≤1.19). For the gallium- (0.26≤x≤0.83) and gold-rich (1.21≤x≤1.31) regions, the KHg₂ type of crystal structure (space group Imma) with mixed Au/Ga occupation is found. A temperature-driven phase transition for the composition YbAuGa from ordered TiNiSi to disordered KHg₂ structure type is observed at 629 °C. Yb L_III X-ray absorption spectra indicate an intermediate valence of +2.5 for Yb atoms in YbAuGa. For samples deviating from this composition a further reduced valence of Yb is observed. Magnetic susceptibility studies show a non-magnetic 4f¹⁴ ground state of Yb atoms with thermal fluctuations towards the 4f¹³ state.     

Local environment in Ba2In2−xWxO5+3x/2 oxide ion conductors

The actual oxygen environment of the tungsten dopant in the Ba₂In_2−xW_xO_5+3x/2 solid solution was revealed by combining X-ray absorption spectroscopy at the tungsten L_I and L_III edges and at the indium L_I edge. Whatever the substitution ratio, the tungsten atoms exhibit a regular octahedral environment. When the substitution ratio increases, the oxygen vacancies are progressively filled until their total occupancy for x=2/3. For x?0.3, the perovskite structure is stabilised; the tungsten atoms are randomly distributed in the structure. Although X-ray diffraction revealed a cubic symmetry for these compositions, a local distortion of the indium environment is observed when a tungsten atom is in its surrounding.     

Spin-driven ferroelectricity in the delafossite CuFe1−xRhxO2 (0≤x≤0.15)

The effect of substitution at the Fe site in the CuFeO₂ delafossite is known to induce a magnetic structure responsible for the appearance of electric polarization. A CuFe_1−xRh_xO₂ series of ceramic samples is studied in order to determine the composition range exhibiting such a polar state. It is found that for the CuFe_1−xRh_xO₂ (x≤0.15) solid solution, the Néel temperature T_N2 decreases monotonously with x from 11.5 K to 5.9 K, for x=0.00 to 0.15, respectively, and that the dielectric peak and the polarization transition temperatures coincide with T_N2. In contrast, the dielectric peak and polarization magnitudes go through an optimum for CuFe_0.92Rh_0.08O₂ (x=0.08). These results demonstrate that, compared to other substituting elements, the Rh³⁺ for Fe³⁺ substitution in CuFeO₂ allows to extend significantly the ferroelectric region in the (x, T) phase diagram in connection with the slower T_N2 decrease.     

Formation of apatite oxynitrides by the reaction between apatite-type oxide ion conductors, La8+xSr2−x(Si/Ge)6O26+x/2, and ammonia

Following growing interest in the use of ammonia as a fuel in solid oxide fuel cells (SOFCs), we have investigated the possible reaction between the apatite silicate/germanate electrolytes, La_8+xSr_2−x(Si/Ge)₆O_26+x/2, and NH₃ gas. We examine how the composition of the apatite phase affects the reaction with ammonia. For the silicate series, the results showed a small degree of N incorporation at 600 °C, while at higher temperatures (800 °C), substantial N incorporation was observed. For the germanate series, partial decomposition was observed after heating in ammonia at 800 °C, while at the lower temperature (600 °C), significant N incorporation was observed. For both series, the N content in the resulting apatite oxynitride was shown to increase with increasing interstitial oxide ion content (x/2) in the starting oxide. The results suggest that the driving force for the nitridation process is to remove the interstitial anion content, such that for the silicates the total anion (O+N) content in the oxynitrides approximates to 26.0, the value for an anion stoichiometric apatite. For the germanates, lower total anion contents are observed in some cases, consistent with the ability of the germanates to accommodate anion vacancies. The removal of the mobile interstitial oxide ions on nitridation suggests problems with the use of apatite-type electrolytes in SOFCs utilising NH₃ at elevated temperatures.