Ethylene glycol-regulated ammonium vanadate with stable layered structure and favorable interplanar spacing as high-performance cathode for aqueous zinc ion batteries

Ammonium vanadate compounds featuring large capacity, superior rate capability and light weight are regarded as promising cathode materials for aqueous zinc ion batteries (AZIBs). However, the controllable synthesis of desired ammonium vanadates remains a challenge. Herein, various ammonium vanadate compounds were successfully prepared by taking advantage of ethylene glycol (EG) regulated polyol-reduction strategy and solvent effect via hydrothermal reaction. The morphology and crystalline phase of resultant products show an evolution from dendritic (NH₄)₂V₆O₁₆ to rod-like NH₄V₄O₁₀ and finally to lamellar (NH₄)₂V₄O₉ as increasing the amount of EG. Specifically, the NH₄V₄O₁₀ product exhibits a high initial capacity of 427.5 mAh/g at 0.1 A/g and stable cycling with a capacity retention of 90.4% after 5000 cycles at 10 A/g. The relatively excellent electrochemical performances of NH₄V₄O₁₀ can be ascribed to the stable open-framework layered structure, favorable (001) interplanar spacing, and peculiar rod-like morphology, which are beneficial to the highly reversible Zn²⁺ storage behaviors. This work offers a unique way for the rational design of high-performance cathode materials for AZIBs.     

Recent advances and perspectives on vanadium-and manganese-based cathode materials for aqueous zinc ion batteries

The growing demand for energy storage has inspired researchers' exploration of advanced batteries.Aqueous zinc ion batteries (ZIBs) are promising secondary chem...     

Nanocomposite of manganese ferrocyanide and graphene: A promising cathode material for rechargeable lithium ion batteries

A nanocomposite of potassium manganese ferrocyanide and graphene (12% C, 88% K_1.8Mn_1.1Fe(CN)₆∙ 0.27H₂O) was prepared by ball milling of graphene oxide powder and nanoparticles of manganese–iron Prussian Blue. It exhibits enhanced electrochemical performance compared to pure Prussian Blue with a specific capacity of 150 mAhg^− 1 at average 3.8 V vs. Li⁺/Li and a good cyclability. The nanocomposite can be considered as competitive to standard cathode materials of present rechargeable lithium ion batteries like cobalt oxide, iron phosphate or NMC.     

Polymer engineering for electrodes of aqueous zinc ion batteries

With the increasing demand for scalable and cost-effective electrochemical energy storage, aqueous zinc ion batteries(AZIBs) have a broad application prospect as an inexpensive, efficient, and naturally secure energy storage device. However, the limitations suffered by AZIBs, including volume expansion and active materials dissolution of the cathode, electrochemical corrosion, irreversible side reactions, zinc dendrites of the anode, have seriously decelerated the civilianization process of AZIB...     

Thermal explosion synthesis of LiFePO4 as a cathode material for lithium ion batteries

Research on Chemical Intermediates - Olivine-type LiFePO4 cathode material was successfully synthesized by a simple method of thermal explosion (TE) using hexamethylenetetramine (C6H12N4) as fuel....     

A carbonyl-rich covalent organic framework as a high-performance cathode material for aqueous rechargeable zinc-ion batteries

Aqueous rechargeable zinc-ion batteries (ZIBs) provide high theoretical capacity, operational safety, low-cost and environmental friendliness for large-scale energy storage and wearable electronic devices, but their future development is plagued by low capacity and poor cycle life due to the lack of suitable cathode materials. In this work, a covalent organic framework (Tp-PTO-COF) with multiple carbonyl active sites is synthesized and successfully introduced in aqueous rechargeable ZIBs for the first time. Tp-PTO-COF delivers high specific capacities of 301.4 and 192.8 mA h g⁻¹ at current densities of 0.2 and 5 A g⁻¹, respectively, along with long-term durability and flat charge–discharge plateaus. The remarkable electrochemical performance is attributed to the abundance of nucleophilic carbonyl active sites, well defined porous structure and inherent chemical stability of Tp-PTO-COF. Moreover, the structural evolution and Zn²⁺ ion intercalation mechanism are discussed and revealed by the experimental analysis and density functional theory calculations. These results highlight a new avenue to develop organic cathode materials for high performance and sustainable aqueous rechargeable ZIBs.

A covalent organic framework (Tp-PTO-COF) with carbonyl active sites was proposed as a novel cathode material and successfully applied in aqueous rechargeable zinc-ion batteries (ZIBs).     

Nickel tetrathiooxalate as a cathode material for potassium batteries

We report a nickel tetrathiooxalate (NiTTO) coordination polymer as a cathode material for potassium batteries. In a potential range of 1.3–3.6 V vs. K⁺/K, the specific capacity of the material is 209 mA h g^?1 at a current density of 0.1 A g^?1, which roughly corresponds to the two-electron reduction of polymer repeating units. The charge–discharge mechanisms of NiTTO in potassium cells were examined using operando Raman spectroscopy.     

A graphene-amorphous FePO4 hollow nanosphere hybrid as a cathode material for lithium ion batteries

Amorphous FePO(4) hollow nanospheres were directly grown on graphene for use as a cathode material in lithium ion batteries. This hybrid exhibits high rate capability and good cycle stability because of efficient Li(+) ion diffusion through the thin wall of the hollow nanospheres and fast electron transport through the graphene.     

Oxide-based cathode materials for rechargeable zinc ion batteries:Progresses and challenges

With the increasing demands for electrical energy storage technologies,rechargeable zinc ion batteries (ZIBs) have been rapidly developed in recent years owing ...     

Organic 3D interconnected graphene aerogel as cathode materials for high-performance aqueous zinc ion battery

Aqueous rechargeable zinc ion batteries are very attractive in large-scale storage applications,because they have high safety,low cost and good durability.Nonetheless,their advancements are hindered by a dearth of positive host materials(cathode)due to sluggish diffusion of Zn2+in the solid inorganic frameworks.Here,we report a novel organic electrode material of poly 3,4,9,10-perylentetracarboxylic dianhydride(PPTCDA)/graphene aerogel(GA).The 3D interconnected porous architecture synthesized through a simple solvothermal reaction,where the PPTCDA is homogenously embedded in the GA nanosheets.The self-assembly of PPTCDA/GA coin-type cell will not only significantly improve the durability and extend lifetime of the devices,but also reduce the electronic waste and economic cost.The self-assembled structure does not require the auxiliary electrode and conductive agent to prepare the electrode material,which is a simple method for preparing the coin-type cell and a foundation for the next large-scale production.The PPTCDA/GA delivers a high capacity of≥200 m Ah g^–1 with the voltage of 0.0~1.5 V.After 300 cycles,the capacity retention rate still close to 100%.The discussion on the mechanism of Zn2+intercalation/deintercalation in the PPTCDA/GA electrode is explored by Fourier transform infrared spectrometer(FT-IR),X-ray diffraction(XRD)and X-ray photoelectron spectroscopy(XPS)characterizations.The morphology and structure of PPTCDA/GA are examined by scanning electron microscopy(SEM)and transmission electron microscopy(TEM).     

Review of vanadium-based electrode materials for rechargeable aqueous zinc ion batteries

In recent years,rechargeable aqueous zinc ion batteries(ZIBs),as emerging energy storage devices,stand out from numerous metal ion batteries.Due to the advantages of low cost,environmentally friendly characteristic and safety,ZIBs can be considered as alternatives to lithium-ion batteries(LIBs).Vanadiumbased compounds with various structures and large layer spacings are considered as suitable cathode candidates for ZIBs.In this review,the recent research advances of vanadium-based electrode materials are systematically summarized.The electrode design strategy,electrochemical performances and energy storage mechanisms are emphasized.Finally,we point out the limitation of vanadium-based materials at present and the future prospect.     

Electrochemically activated MnO as a cathode material for sodium-ion batteries

Besides classical electrode materials pertaining to Li-ion batteries, recent interest has been devoted to pairs of active redox composites having a redox center and an intercalant source. Taking advantage of the NaPF₆ salt decomposition above 4.2 V, we extrapolate this concept to the electrochemical in situ preparation of F-based MnO composite electrodes for Na-ion batteries. Such electrodes exhibit a reversible discharge capacity of 145 mAh g^− 1 at room temperature. The amorphization of pristine MnO electrode after activation is attributed to the electrochemical grinding effect caused by substantial atomic migration and lattice strain build-up upon cycling.     

Recent advances in interfacial modification of zinc anode for aqueous rechargeable zinc ion batteries

To tackle energy crisis and achieve sustainable development, aqueous rechargeable zinc ion batteries have gained widespread attention in large-scale energy storage for their low cost, high safety, high theoretical capacity, and environmental compatibility in recent years. However, zinc anode in aqueous zinc ion batteries is still facing several challenges such as dendrite growth and side reactions(e.g., hydrogen evolution), which cause poor reversibility and the failure of batteries. To address ...     

Nano-LiCoO2 as cathode material of large capacity and high rate capability for aqueous rechargeable lithium batteries

Crystalline nanoparticles of LiCoO₂ are prepared by a sol–gel method at 550 °C and characterized by X-ray diffraction. Their electrochemical behaviors were characterized by cyclic voltammograms, capacity measurement and cycling performance. Results show that the reversible capacity of the nano-LiCoO₂ can be up to 143 mAh/g at 1000 mA/g and still be 133 mAh/g at 10,000 mA/g (about 70C) in 0.5 mol/l Li₂SO₄ aqueous electrolyte. In addition, their cycling behavior is also very satisfactory, no evident capacity fading during the initial 40 cycles. These data present great promise for the application of aqueous rechargeable lithium batteries.     

Fan-like MnV2O6 superstructure for rechargeable aqueous zinc ion batteries

In recent years, vanadate has attracted the attention of researchers for its application in electrode materials due to its high specific capacity and layered crystal structure. Herein, a typical manganese vanadium oxides (MnV₂O₆) product is efficient synthesis via a simple one-step hydrothermal method at 200 °C for 16 h. The as-prepared MnV₂O₆ sample is found to be the unique one-dimensional fan-like superstructure consist of several nanorods. From a microcosmic point of view, VO₆ octahedra sheets are connected by sharing edges which provides highly-open framework for rapid the intercalation and deintercalation of guest ions Therefore, stable MnV₂O₆ was prepared and used as a cathode material in aqueous zinc ion batteries, which displayed favorable specific discharge capacity, excellent coulombic efficiency and well cycling performance.     

InP as new anode material for lithium ion batteries

InP thin film has been successfully fabricated by pulsed laser deposition (PLD) and was investigated for its electrochemistry with lithium for the first time. InP thin film presented a large reversible discharge capacity around 620 mAh g^?1. The reversibility of the crystalline structure and electrochemical reaction of InP with lithium were revealed by using ex situ XRD and XPS measurements. The high reversible capacity and stable cycle of InP thin film electrode with low overpotential made it one of the promise energy storage materials for future rechargeable lithium batteries.     

A Fe-rich sodium iron orthophosphate as cathode material for rechargeable batteries

Phosphate compounds have been intensively investigated as cathode materials for sodium ion batteries. Here we report the synthesis and electrochemical performance of a novel iron-rich sodium iron orthophosphate. This new compound was synthesized by a conventional solid state reaction method, and was found to be electrochemically active, delivering a reversible capacity of 85 mAhg^− 1 at an average voltage of c.a. 3.0 V vs. Na/Na⁺. Besides, the desodiated phase can be (de)intercalated by lithium ions when assembled into a lithium cell. Our discovery will open up the scope of phosphate family and reveal the importance of off-stoichiometric compounds as cathode materials.     

A flexible carbon nanotube@V2O5 film as a high-capacity and durable cathode for zinc ion batteries

Aqueous zinc-ion batteries (ZIBs) are receiving a continuously increasing attention for mobile devices,especially for the flexible and wearable electronics,due ...     

Calcium ion pinned vanadium oxide cathode for high-capacity and long-life aqueous rechargeable zinc-ion batteries

Science China Chemistry - Rechargeable aqueous zinc ion batteries (ZIBs), with the easy operation, cost effectiveness, and high safety, are emerging candidates for high-energy wearable/portable...     

A bi-component polyoxometalate-derivative cathode material showed impressive electrochemical performance for the aqueous zinc-ion batteries

Rechargeable aqueous zinc-ion batteries are recently gaining incremental attention because of low cost and material abundance, but their development is plagued by limited choices of cathode materials with satisfactory cycling performance. The polyoxometalates perform formidable redox stability and able to participate in multi-electron transfer, which was well-suited for energy storage. Herein, a bi-component polyoxometalate-derivative KNiVO (K₂[Ni(H₂O)₆]₂[V₁₀O₂₈]·4H₂O polyoxometalates after annealing) is firstly demonstrated as a cathode material for aqueous ZIBs. The layered KV₃O₈ (KVO) In the bi-component material constitutes Zn²⁺ migration and storage channels (K⁺ were substantially replaced by Zn²⁺ in the activation phase), and the three-dimensional NiV₃O₈ (NiVO) part acts as skeleton to stabilize the ion channels, which assist the cell to demonstrate a high-rate capacity and specific energy of 229.4 mAh/g and satisfactory cyclability (capacity retention of 99.1% after 4500 cycles at a current density of 4 A/g). These results prove the feasibility of POM as cathode materials precursor and put forward a novel pattern of the Zn²⁺ storage mechanism in the activated-KNiVO clusters, which also provide a new route for selecting or designing high-performance cathode for aqueous ZIBs and other advanced battery systems.