The study of controlling pore size on electrospun carbon nanofibers for hydrogen adsorption

Polyacrylonitrile (PAN)-based carbon nanofibers (CNFs) were prepared by using electrospinning method and heat treatment to get the media for hydrogen adsorption storage. Potassium hydroxide and zinc chloride activations were conducted to increase specific surface area and pore volume of CNFs. To investigate the relation between pore structure and the capacity of hydrogen adsorption, textural properties of activated CNFs were studied with micropore size distribution, specific surface area, and total pore volume by using BET (Brunauer-Emmett-Teller) surface analyzer apparatus and the capacity of hydrogen adsorption was evaluated by PCT (pressure-composition-temperature) hydrogen adsorption analyzer apparatus with volumetric method. The surface morphology of activated CNFs was observed by SEM (scanning electron microscope) images to investigate the surface change through activation. Even though specific surface area and total pore volume were important factors for increasing the capacity of hydrogen adsorption, the pore volume which has pore width (0.6-0.7 nm) was a much more effective factor than specific surface area and pore volume in PAN-based electrospun activated CNFs.     

Tuning the size of supramolecular single‐chain polymer nanoparticles

In this article we further investigate our recently devised method for folding polymer chains into nanoparticles using intramolecular, supramolecular interactions. Specifically, we show a direct relationship between molecular weight of the parent chain and size of the folded nanoparticle. This is investigated both analytically via the separation and subsequent characterization of a polydisperse nanoparticle sample into high and low molecular weight fractions, and by examining a family of poly(norbornenes) deliberately prepared with varying molecular weights. With these polymer nanoparticles in hand their assembly on surfaces is studied where larger structures are formed as a result of the interplay between the movement of the nanoparticles on the surface and the evaporation of solvent. © 2010 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2010     

Coaxial electrospinning with organic solvent for controlling the size of self-assembled nanoparticles

We show that coaxial electrospinning using organic solvent as the sheath fluid is a viable way to produce tailor-made nanofibers composed of polyvinylpyrrolidine, tristearic and naproxen. Self-assembled hybrid nanoparticles are generated from the composite nanofibers under aqueous conditions and particle size has a linear relationship with fiber diameter.     

Redox reactions of hydrogen adducts of thymine: Comparisons with the reactions of hydroxyl adducts

Hydrogen atoms form two kinds of adducts with thymine (oxidizing and reducing). Redox reactions of these two kinds, popularly known as 5-hydrogenated-6-thyminyl (reducing) and 6-hydrogenated-5-thyminyl (oxidizing), were investigated where ferric ions (oxidizing) and ferrous ions (reducing) were used as the corresponding redox partners. A steady-state gamma radiolytic system was chosen where hydroxyl radicals were scavenged using t-butyl alcohol in acidic (pH 1.8) solution. It is inferred that the redox potential of oxidizing hydrogenated thyminyl radicals lies between 0.77 and 1.4 V vs. NHE. The reducing hydrogenated thyminyl radical has a redox value less than 0.8 V because it efficiently undergoes electron transfer reaction with Fe(III). A probable range of redox values for hydroxyl adduct of thymine is included for comparison.     

Tuning metal hydride thermodynamics via size and composition: Li-H, Mg-H, Al-H, and Mg-Al-H nanoclusters for hydrogen storage

Nanoscale Li and intermetallic Al-Mg metal hydride clusters are investigated as a possible hydrogen storage material using the high-level quantum Monte Carlo computational method. Lower level methods such as density functional theory are qualitatively, not quantitatively accurate for the calculation of the enthalpy of absorption of H(2). At sizes around 1 nm, it is predicted that Al/Mg alloyed nanoparticles are stable relative to the pure compositions and the metal composition can be tuned in tandem with the size to tune the hydrogen absorption energy, making this a promising route to a rechargeable hydrogen storage material.     

Tuning the electrocatalytic activity of Pt nanoparticles on carbon nanotubes via surface functionalization

Polyelectrolytes with various characteristic functional groups as interlinkers to anchor Pt nanoparticles were used to functionalize carbon nanotubes (CNTs) as Pt electrocatalyst support. It was found that polyanions (poly(styrenesulfonic acid) (PSS), and poly(acrylic acid sodium) (PAA)) have a beneficial effect on methanol electrooxidation on Pt nanoparticles supported on carbon nanotubes via modifying their electronic structure through charge transfer from polyanions to Pt sites and supply of oxygen-containing species. The increased electron density around Pt sites by the charge transfer from polyanions would cause partial filling of Pt 5d-bands, resulting in the downshift of d-band center and weaker chemisorption with oxygen-containing species (e.g. CO_ad). The weakened chemisorption of CO on Pt nanoparticles would promote the methanol electrooxidation. On the contrary, polycations would have an opposite effect on the electronic structure and chemisorption properties of Pt nanoparticles.     

The effect of hydrogen adsorption on the electronic structure of gold nanoparticles

It has been demonstrated that hydrogen adsorption has an effect on the electronic structure of gold nanoparticles. The physicochemical properties of separate gold nanoparticles have been studied under an ultrahigh vacuum scanning tunneling microscope. The structure and electronic structure of gold–hydrogen clusters were modeled by the quantum-chemical density functional theory method. Hydrogen adsorption onto gold nanoparticles 4–5 nm is size at room temperature was experimentally revealed, and the lower limit of 1.7 eV for the Au–H bond energy was determined. The interaction of hydrogen with gold leads to a considerable rearrangement of the electronic subsystem of nanoparticles. The experimentally observed effects were supported by quantum-chemical calculations. The rearrangement mechanism is related to strong correlations in the electronic subsystem.     

Tuning particle morphology of mesoporous silica nanoparticles for adsorption of dyes from aqueous solution

Spherical and rod mesoporous silica nanoparticles with hexagonal mesostructure were prepared using the modified Stöber method. The morphology, size and internal pore structure can be controlled by simple changing of surfactant concentration and water:ethanol molar ratio. Monodispersed spheroid MCM-41 was obtained at 40 °C under basic conditions using cetyltrimethylammonium bromide (C₁₆TAB) as template. Obtained materials were characterized by X-ray diffraction (XRD), nitrogen physisorption (BET), transmission electron microscopy (TEM) and scanning electronic microscopy (SEM). The results reveal that the pore volume and surface area increase when the amount of C₁₆TAB increases whereas the pore diameter and particle size decrease. However, the use of ethanol as cosolvent led to an increase in the particles’ size. Moreover, the addition of a 3-aminopropyltriethoxysilane greatly influenced the final particle shape. The material was effectively used for the removal of two fluorescent dyes (Hoechst 33342 and rhodamine 6g) from aqueous solution. Adsorption isotherm models, Langmuir, Freundlich and Temkin were used to simulate the equilibrium data. The Langmuir model was found to fit the experimental data better than others models.     

Promotion of organic reactions by interfacial hydrogen bonds on hydroxyl group rich nano-solids

Surface hydroxyl group rich nano-structured solids dramatically increase the rate of several organic reactions; such effect is attributed to the formation of interfacial hydrogen bonds between the surface hydroxyl groups and the reactants; this catalytic effect is versatile and applicable for a broad range of reaction conditions.     

Three-site model for hydrogen adsorption on supported platinum particles: influence of support ionicity and particle size on the hydrogen coverage

Pt L(3) X-ray absorption edge data on small supported Pt particles (N < 6.5) reveals that at very low H(2) pressure or high temperature the strongest bonded H is chemisorbed in an atop position. With decreasing temperature or at higher H(2) pressure only n-fold (n = 2 or 3) sites are occupied. At high H(2) pressure or low temperature, the weakest bonded H is positioned in an "ontop" site, with the chemisorbing Pt already having a stronger bond to a H atom in an n-fold site. DFT calculations show that the adsorption energy of hydrogen increases for Pt particles on ionic (basic) supports. The combination of the DFT calculations with hydrogen chemisorption data and the analysis of the Pt L(3) X-ray absorption spectra implies that both the H coverage and/or the type of active Pt surface sites, which are present at high temperature catalytic reaction conditions, strongly depend on the ionicity of the support. The consequences for Pt catalyzed hydrogenolysis and hydrogenation reactions will be discussed.     

Cyclodextrins as growth controlling agents for enhancing the catalytic activity of PVP-stabilized Ru(0) nanoparticles

Cyclodextrins act as growth controllers in the synthesis of PVP-stabilized Ru(0) nanoparticles, leading to enhancement of the catalytic activity in the hydrogenation of furfural.     

Amperometric sensing of hydrogen peroxide via an ITO electrode modified with gold nanoparticles electrodeposited on a CoMn-layered double hydroxide

Microchimica Acta - An electrochemical sensor for hydrogen peroxide (H2O2) has been fabricated by electrodepositing gold nanoparticles (AuNPs) on an indium tin oxide (ITO) electrode modified with...     

An XPS and STM study of the size effect in NO adsorption on gold nanoparticles

The effect of the gold particle size, temperature of the model gold catalyst, and NO pressure on the composition of the adsorption layer was studied by in situ XPS and STM methods. Adsorption of nitric oxide was carried out on gold nanoparticles with a mean size of 2?C7 nm prepared on the thin film surface of alumina. In high-vacuum conditions (P _NO ?? 10^?5 Pa), only atomically adsorbed nitrogen is formed on the surface of gold nanoparticles. At about 1 Pa pressure of NO and in the temperature range from 325 to 475 K, atomically adsorbed nitrogen coexists with the N₂O adsorption complex. The surface concentration of the adsorbed species changes with a change in both the mean gold particle size and adsorption temperature. The saturation coverage of the surface with the nitrogen-containing complexes is observed for the sample with a mean size of gold particles of 4 nm. The surface of these samples is mainly covered with atomically adsorbed nitrogen, the saturation coverage of adsorbed nitrogen of about ??0.6 monolayer is attained at T = 473 K. The change in the composition of the adsorption layer with temperature of the catalysts agrees with the literature data on the corresponding temperature dependence of the selectivity of N₂ formation observed in the catalytic reduction of NO with carbon monoxide on the Au/Al₂O₃ catalyst. The dependences of the composition of the adsorption layer on the mean size of Au nanoparticles (size effect) and temperature of the catalyst are explained by the sensitivity of NO adsorption to specific features of the gold surface.     

Infrared spectroscopy study of adsorption and coadsorption of carbon monoxide and hydrogen on Ru/Al203

IR spectroscopy was used to study CO adsorption and coadsorption with H₂ on 5% Ru/Al₂O₃. By variation of sample pretreatment, CO pressures, contact time and temperature several surface species were identified: mono– and multicarbonyl species formed with ruthenium in different oxidation state and on various sites of the catalyst surface. During CO and H₂ coadsorption and interaction, a new band at 2030 cm^–1 was registered. It was assigned to a 'hydrocarbonyl' species on the metal particles. Thermal stability of some CO species was studied. Most stable and least reactive species was found to be a multicarbonyl giving rise to bands at 1980 and 2060 cm^–1.     

Particle size dependent adsorption and reaction kinetics on reduced and partially oxidized Pd nanoparticles

Combining scanning tunneling microscopy (STM), IR reflection absorption spectroscopy (IRAS) and molecular beam (MB) techniques, we have investigated particle size effects on a Pd/Fe(3)O(4) model catalyst. We focus on the particle size dependence of (i) CO adsorption, (ii) oxygen adsorption and (iii) Pd nanoparticle oxidation/reduction. The model system, which is based on Pd nanoparticles supported on an ordered Fe(3)O(4) film on Pt(111), is characterized in detail with respect to particle morphology, nucleation, growth and coalescence behavior of the Pd particles. Morphological changes upon stabilization by thermal treatment in oxygen atmosphere are also considered. The size of the Pd particles can be varied roughly between 1 and 100 nm. The growth and morphology of the Pd particles on the Fe(3)O(4)/Pt(111) film were characterized by STM and IRAS of adsorbed CO as a probe molecule. It was found that very small Pd particles on Fe(3)O(4) show a strongly modified adsorption behavior, characterized by atypically weak CO adsorption and a characteristic CO stretching frequency around 2130 cm(-1). This modification is attributed to a strong interaction with the support. Additionally, the kinetics of CO adsorption was studied by sticking coefficient experiments as a function of particle size. For small particles it is shown that the CO adsorption rate is significantly enhanced by the capture zone effect. The absolute size of the capture zone was quantified on the basis of the STM and sticking coefficient data. Finally, oxygen adsorption was studied by means of MB CO titration experiments. Pure chemisorption of oxygen is observed at 400 K, whereas at 500 K partial oxidation of the particles occurs. The oxidation behavior reveals strong kinetic hindrances to oxidation for larger particles, whereas facile oxidation and reduction are observed for smaller particles. For the latter, estimates point to the formation of oxide layers which, on average, are thicker than the surface oxides on corresponding single crystal surfaces.     

Low-temperature adsorption of hydrogen on nanoporous aluminophosphates: effect of pore size

Several nanoporous aluminophosphates (AlPOs) have been used to analyze the effect of pore diameter on the hydrogen adsorption characteristics. The heat of adsorption and adsorption capacity per unit micropore volume increase with decreasing pore size. AlPOs with smaller micropores favorably adsorb hydrogen at relatively low pressures. This work demonstrates that small pore size and large micropore volume are beneficial for high hydrogen uptake.     

Investigation of lead adsorption via the ionization of hydrogen adsorbed on platinized platinum

In the case of lead adsorption via the ionization of hydrogen adsorbed on platinized platinum, adsorbed Pb⁺ ions are also formed on, and partly desorbed from, the surface. The site requirement of an adsorbed lead atom is S=2.3 and 1.9.     

Copper oxide nanoparticles and ionic liquid modified carbon electrode for the non-enzymatic electrochemical sensing of hydrogen peroxide

The direct electrocatalytic reduction of hydrogen peroxide in alkaline medium at a carbon ionic liquid electrode modified with copper oxide nanoparticles was investigated. The electrode was prepared by mixing graphite particles, ionic liquid (n-octylpyridium hexafluorophosphate) and copper oxide nanoparticles. Unlike the film-modified electrode, the fabrication of this electrode is simple and highly reproducible. The combination of the good conductivity of the ionic liquid and the high catalytic activity of the nanoparticles resulted in an electrode with attractive properties for the determination of hydrogen peroxide. The concentration of NaOH and the loading of copper oxide nanoparticles were optimized. The linear range for the determination of hydrogen peroxide is from 1.0 μM to 2.5 mM, the detection limit is 0.5 μM. High stability, sensitivity, selectivity and reproducibility, fast response, the ease of preparation, and surface renewal made the electrode well suitable for the determination of hydrogen peroxide in real samples.