CoOx@Co-NC Catalyst with Dual Active Centers for Enhanced Oxygen Evolution: Breaking Trade-Off of Particle Size and Metal Loading

Increasing the metal loading and downsizing the metal particle size are two effective ways to boost the electrochemical performance of catalysts. However, it is difficult to simultaneously increase the metal loading and reduce the particle size since isolated individual atoms are easy to aggregate into nanoparticles when increasing the metal loading. To tackle this contradiction, we report a bottom-up ligand-mediated strategy to facilely prepare ultrafine CoO_x nanoclusters anchored on a Co-N-containing carbon matrix (CoO_x@Co-NC). The co-exist of N and O atoms prevent Co atoms agglomerating into large particles and allowing the formation of ultrafine dispersed Co species with large Co loading (up to 20 wt.%). Since the relationship between ultrasmall size and large metal loading is well balanced, the CoO_x nanoclusters have no inhibitory effect, but facilitate the catalytic performance of Co-N₄ sites during OER process. Consequently, due to the synergistic effect of ultrafine CoO_x nanoclusters and Co-N₄ macrocycles, the as-synthesized CoO_x@Co-NC exhibit promising OER activity (η₁₀=370 mV, Tafel plot=40 mV/dec), bettering than that of benchmark RuO₂ (η₁₀=411 mV, Tafel plot=72 mV/dec). This ligand-mediated strategy to synthesize carbonaceous materials containing dual active centers with large metal loading is promising for developing active and stable catalysts for electrocatalytic applications.     

In Situ Transformation of Prussian-Blue Analogue-Derived Bimetallic Carbide Nanocubes by Water Oxidation: Applications for Energy Storage and Conversion

Using bimetallic Prussian blue analogue (PBA) as a precursor is effective for preparing electrocatalysts for the oxygen evolution reaction (OER); however, the role of these PBA-derived catalysts in the OER is still ambiguous. Herein, by simply controlling synthesis temperature, a bimetallic PBA-derived O,N-codoped Ni–Fe carbide, can be well tuned to optimize structure and OER performance. Importantly, by a series of ex situ and in situ investigations, real active species of NiFeO_xH_y are in situ formed on the surface during the OER, which reveals a “pre-catalyst” role of O,N-codoped Ni–Fe carbides. Furthermore, it has been successfully applied to highly efficient Zn–air batteries and outplays its RuO₂ counterpart. When applied to photoelectrocatalytic water oxidation as the co-catalyst, it improves the performance of the BiVO₄ photoanode by enhancing hole collecting and transporting ability. We believe this research not only provides a highly efficient and low-cost electrocatalyst for the OER, but also unveils the “pre-catalyst” role of PBA-derived materials in energy-storage and conversion devices.     

A Permselective CeOx Coating To Improve the Stability of Oxygen Evolution Electrocatalysts

Highly active NiFeO_x electrocatalysts for the oxygen evolution reaction (OER) suffer gradual deactivation with time owing to the loss of Fe species from the active sites into solution during catalysis. The anodic deposition of a CeO_x layer prevents the loss of such Fe species from the OER catalysts, achieving a highly stable performance. The CeO_x layer does not affect the OER activity of the catalyst underneath but exhibits unique permselectivity, allowing the permeation of OH^? and O₂ through while preventing the diffusion of redox ions through the layer to function as a selective O₂‐evolving electrode. The use of such a permselective protective layer provides a new strategy for improving the durability of electrocatalysts.     

Controlled Assembly of Cu/Co-Oxide Beaded Nanoclusters on Thiolated Graphene Oxide Nanosheets for High-Performance Oxygen Evolution Catalysts

The use of water splitting modules is highly desired for the sustainable production of H₂ as a future energy carrier. However, the sluggish kinetics and demand of high anodic potential are the bottlenecks for half-the cell oxygen evolution reaction (OER), which severely hamper the overall conversion efficiency. Although transition metal oxides based electrocatalysts have been envisioned as cost-effective and potential contenders for this quest, nevertheless, their low conductivity, instability, and limited number of active sites are among the common impediments that need to be addressed to eventually enhance their inherent catalytic potential for enhanced OER activity. Herein, the controlled assembly of transition metal oxides, that is, Cu@CuO_x nanoclusters (NCs, ≈2 nm) and Co@CoO_x beaded nanoclusters (BNCs, ≈2 nm), on thiol-functionalized graphene oxide (G-SH) nanosheets is reported to form novel and highly efficient electrocatalysts for OER. The thiol (-SH) functionality was incorporated by selective epoxidation on the surface of graphene oxide (GO) to achieve chemically exfoliated nanosheets to enhance its conductivity and trapping ability for metal oxides in nanoscale dimensions (≈2 nm). During the electrocatalytic reaction, overpotentials of 290 mV and 310 mV are required to achieve a current density of 10 mA cm⁻² for BNCs and NCs, respectively, and the catalysts exhibit tremendous long-term stability (≈50 h) in purified alkaline medium (1 m KOH) with no dissolution in the electrolyte. Moreover, the smaller Tafel slopes (54 mV/dec for BNCs and 66 mV/dec for NCs), and a Faradic efficiency of approximately 96 % indicate not only the selectivity but also the tailored heterogeneous electrons transfer (HET) rate, which is required for fast electrode kinetics. It is anticipated that such ultrasmall metal oxide nanoclusters and their controlled assembly on a conducting surface (G-SH) may offer high electrochemical accessibility and a plethora of active sites owing to the drastic decrease in dimensions and thus can synergistically ameliorate the challenging OER process.     

Activating P2-NaxCoO2 for efficient water oxidation catalysis via controlled chemical oxidation

Electrocatalytic water oxidation is critically important for a wide range of emerging energy conversion devices. Co-based metal oxides are very promising candidates as high-performance oxygen evolution reaction (OER) catalysts. Here, it is shown that chemical oxidation of layered P2-Na_xCoO₂ could lead to compositionally tunable P2-Na_xCoO₂ with high OER activity. The optimal electrocatalytic activity emerges in a narrow range of sodium concentrations with Na_0·28CoO₂ exhibiting the lowest overpotential of 350 mV at 10 mA/cm² and a Tafel slope of 29 mV/dec in 0.1 M NaOH electrolyte, outperforming the benchmark RuO₂ catalyst and previous LiCoO₂-based electrocatalysts. Electrochemical measurements and X-ray spectroscopic investigations reveal that chemically oxidized P2-Na_xCoO₂ catalysts are intrinsically active toward OER, arising from the abundant oxygen vacancies, increased Co-O covalency, and enhanced conductivity after deintercalation of the Na⁺. Our findings provide new insights into the design and synthesis of cost-effective catalysts toward efficient and durable OER.     

Double Perovskite LaFexNi1−xO3 Nanorods Enable Efficient Oxygen Evolution Electrocatalysis

Perovskite‐based electrocatalysts are one of the most promising materials for oxygen evolution reaction (OER), but their activity and durability are still far from desirable. Herein, we demonstrate that the double perovskite LaFe_xNi_1?xO₃ (LFNO) nanorods (NRs) can be adopted as highly active and stable OER electrocatalysts. The optimized LFNO‐II NRs with Ni/Fe ratio of 8:2 achieve a low overpotential of 302 mV at 10 mA cm^?2 and a small Tafel slope of 50 mV dec^?1, outperforming those of the commercial Ir/C. The LFNO‐II NRs also show high OER stability with slight current decrease after 20 h. The enhanced activity is explained by the improved surface area, tailored electronic structure as well as strong hybridization between O and Ni.     

A Surface-Oxide-Rich Activation Layer (SOAL) on Ni2Mo3N for a Rapid and Durable Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is key to renewable energy technologies such as water electrolysis and metal–air batteries. However, the multiple steps associated with proton-coupled electron transfer result in sluggish OER kinetics and catalysts are required. Here we demonstrate that a novel nitride, Ni₂Mo₃N, is a highly active OER catalyst that outperforms the benchmark material RuO₂. Ni₂Mo₃N exhibits a current density of 10 mA cm⁻² at a nominal overpotential of 270 mV in 0.1 m KOH with outstanding catalytic cyclability and durability. Structural characterization and computational studies reveal that the excellent activity stems from the formation of a surface-oxide-rich activation layer (SOAL). Secondary Mo atoms on the surface act as electron pumps that stabilize oxygen-containing species and facilitate the continuity of the reactions. This discovery will stimulate the further development of ternary nitrides with oxide surface layers as efficient OER catalysts for electrochemical energy devices.     

A Dendritic Nanostructured Copper Oxide Electrocatalyst for the Oxygen Evolution Reaction

To use water as the source of electrons for proton or CO₂ reduction within electrocatalytic devices, catalysts are required for facilitating the proton‐coupled multi‐electron oxygen evolution reaction (OER, 2 H₂O→O₂+4 H⁺+4 e⁻). These catalysts, ideally based on cheap and earth abundant metals, have to display high activity at low overpotential and good stability and selectivity. While numerous examples of Co, Mn, and Ni catalysts were recently reported for water oxidation, only few examples were reported using copper, despite promising efficiencies. A rationally designed nanostructured copper/copper oxide electrocatalyst for OER is presented. This material derives from conductive copper foam passivated by a copper oxide layer and further nanostructured by electrodeposition of CuO nanoparticles. The generated electrodes are highly efficient for catalyzing selective water oxidation to dioxygen with an overpotential of 290 mV at 10 mA cm⁻² in 1 m NaOH solution.     

Bimetallic cobalt-nickel coordination polymer electrocatalysts for enhancing oxygen evolution reaction

Coordination polymers（CPs） have great potential to be used in electrocatalysis owing to their designable compositions and structures. It is highly challenging to apply CPs as electrocatalysts for oxygen evolution reaction（OER） on account of insufficient catalytic efficiency and relatively poor stability of current electrocatalysts. Herein, through a mixed-metal strategy, one-dimensional Co_xNi_1-x-HIPA with dual active sites was synthesized and studied for OER electrocatalyst...     

Amorphous Nanocages of Cu‐Ni‐Fe Hydr(oxy)oxide Prepared by Photocorrosion For Highly Efficient Oxygen Evolution

Electrochemical water splitting requires efficient, low‐cost water oxidation catalysts to accelerate the sluggish kinetics of the water oxidation reaction. A rapid photocorrosion method is now used to synthesize the homogeneous amorphous nanocages of Cu‐Ni‐Fe hydr(oxy)oxide as a highly efficient electrocatalyst for the oxygen evolution reaction (OER). The as‐fabricated product exhibits a low overpotential of 224 mV on a glassy carbon electrode at 10 mA cm^?2 (even lower down to 181 mV when supported on Ni foam) with a Tafel slope of 44 mV dec^?1 for OER in an alkaline solution. The obtained catalyst shows an extraordinarily large mass activity of 1464.5 A g^?1 at overpotential of 300 mV, which is the highest mass activity for OER. This synthetic strategy may open a brand new pathway to prepare copper‐based ternary amorphous nanocages for greatly enhanced oxygen evolution.     

A Surface‐Oxide‐Rich Activation Layer (SOAL) on Ni2Mo3N for a Rapid and Durable Oxygen Evolution Reaction

The oxygen evolution reaction (OER) is key to renewable energy technologies such as water electrolysis and metal–air batteries. However, the multiple steps associated with proton‐coupled electron transfer result in sluggish OER kinetics and catalysts are required. Here we demonstrate that a novel nitride, Ni₂Mo₃N, is a highly active OER catalyst that outperforms the benchmark material RuO₂. Ni₂Mo₃N exhibits a current density of 10 mA cm^?2 at a nominal overpotential of 270 mV in 0.1 m KOH with outstanding catalytic cyclability and durability. Structural characterization and computational studies reveal that the excellent activity stems from the formation of a surface‐oxide‐rich activation layer (SOAL). Secondary Mo atoms on the surface act as electron pumps that stabilize oxygen‐containing species and facilitate the continuity of the reactions. This discovery will stimulate the further development of ternary nitrides with oxide surface layers as efficient OER catalysts for electrochemical energy devices.     

Preferential Co substitution on Ni sites in Ni–Fe oxide arrays enabling large-current-density alkaline oxygen evolution

Developing low-cost and high-activity transition metal oxide electrocatalysts for an efficient oxygen evolution reaction (OER) at a large current density is highly demanded for industrial application and remains a big challenge. Herein, we report vertically aligned cobalt doped Ni–Fe based oxide (Co–NiO/Fe₂O₃) arrays as a robust OER electrocatalyst via a simple method combining hydrothermal reaction with heat treatment. Density functional theory calculation and XRD Rietveld refinement reveal that Co preferentially occupies the Ni sites compared to Fe in the Ni–Fe based oxides. The electronic structures of the Co–NiO/Fe₂O₃ could be further optimized, leading to the improvement of the intrinsic electronic conductivity and d-band center energy level and the decrease in the reaction energy barrier of the rate-determining step for the OER, thus accelerating its OER electrocatalytic activity. The Co–NiO/Fe₂O₃ nanosheet arrays display state-of-the-art OER activities at a large current density for industrial demands among Fe–Co–Ni based oxide electrocatalysts, which only require an ultra-low overpotential of 230 mV at a high current density of 500 mA cm⁻², and exhibit superb durability at 500 mA cm⁻² for at least 300 h without obvious degradation. The Co–NiO/Fe₂O₃ nanosheet arrays also have a small Tafel slope of 33.9 mV dec⁻¹, demonstrating fast reaction kinetics. This work affords a simple and effective method to design and construct transition metal oxide based electrocatalysts for efficient water oxidation.

Co–NiO/Fe₂O₃ nanosheets featuring Co substitution on Ni sites can effectively regulate electronic structures and exhibit high OER activities with low overpotential (η₅₀₀ = 230 mV), small Tafel slope (33.9 mV dec⁻¹) and superb durability for 300 h.     

Iron-Doped Nickel Molybdate with Enhanced Oxygen Evolution Kinetics

Electrochemical water splitting is one of the potential approaches for making renewable energy production and storage viable. The oxygen evolution reaction (OER), as a sluggish four-electron electrochemical reaction, has to overcome high overpotential to accomplish overall water splitting. Therefore, developing low-cost and highly active OER catalysts is the key for achieving efficient and economical water electrolysis. In this work, Fe-doped NiMoO₄ was synthesized and evaluated as the OER catalyst in alkaline medium. Fe³⁺ doping helps to regulate the electronic structure of Ni centers in NiMoO₄, which consequently promotes the catalytic activity of NiMoO₄. The overpotential to reach a current density of 10 mA cm⁻² is 299 mV in 1 m KOH for the optimal Ni_0.9Fe_0.1MoO₄, which is 65 mV lower than that for NiMoO₄. Further, the catalyst also shows exceptional performance stability during a 2 h chronopotentiometry testing. Moreover, the real catalytically active center of Ni_0.9Fe_0.1MoO₄ is also unraveled based on the ex situ characterizations. These results provide new alternatives for precious-metal-free catalysts for alkaline OER and also expand the Fe-doping-induced synergistic effect towards performance enhancement to new catalyst systems.     

Laser-Ablation-Produced Cobalt Nickel Phosphate with High-Valence Nickel Ions as an Active Catalyst for the Oxygen Evolution Reaction

Cost-effective, highly efficient and stable non-noble metal-based catalysts for the oxygen evolution reaction (OER) are very crucial for energy storage and conversion. Here, an amorphous cobalt nickel phosphate (CoNiPO₄), containing a considerable amount of high-valence Ni³⁺ species as an efficient electrocatalyst for OER in alkaline solution, is reported. The catalyst was converted from Co-doped Ni₂P through pulsed laser ablation in liquid (PLAL) and exhibits a large specific surface area of 162.5 m² g⁻¹ and a low overpotential of 238 mV at 10 mA cm⁻² with a Tafel slope of 46 mV dec⁻¹, which is much lower than those of commercial RuO₂ and IrO₂. This work demonstrates that PLAL is a powerful technology for generating amorphous CoNiPO₄ with high-valence Ni³⁺, thus paving a new way towards highly effective OER catalysts.     

MnO2-0.39IrOx复合氧化物用于酸性介质中水氧化反应的性能

通过Adams方法成功制备MnO₂-0.39IrO_x(0.39为Ir/Mn的原子比)催化剂并将其用于酸性介质中高效析氧反应(OER)。电化学测试发现,MnO₂-0.39IrO_x仅需253 mV的过电势即可驱动10 mA·cm^-2的水氧化电流密度,并可稳定运行200 h。在1.50 V(vs RHE)电势下,MnO₂-0.39IrO_x的贵金属Ir的质量活性为61.3 mA·mg^-1,是IrO₂的35.8倍,说明MnO₂掺杂大大提升了贵金属利用率。结构分析发现MnO₂-0.39IrO_x独特的片状结构大幅度提高了催化剂的电化学活性表面积,并且Ir位点与Mn位点之间存在一定的电子相互作用。催化过程分析表明,MnO₂-0.39IrO_x表面出现一定的重构现象,并且Mn组分对Ir位点的化学环境实现了持续优化,从而实现了催化剂的高效酸性OER性能。     

Improving the Electrocatalytic Activity of a Nickel-Organic Framework toward the Oxygen Evolution Reaction through Vanadium Doping

Metal-organic frameworks (MOFs) have been considered as potential oxygen evolution reaction (OER) electrocatalysts owning to their ultra-thin structure, adjustable composition, high surface area, and high porosity. Here, we designed and fabricated a vanadium-doped nickel organic framework (V_1−x−Ni_xMOF) system by using a facile two-step solvothermal method on nickel foam (NF). The doping of vanadium remarkably elevates the OER activity of V_1−x−Ni_xMOF, thus demonstrating better performance than the corresponding single metallic Ni-MOF, NiV-MOF and RuO₂ catalysts at high current density (>400 mA cm⁻²). V_0.09−Ni_0.91MOF/NF provides a low overpotential of 235 mV and a small Tafel slope of 30.3 mV dec⁻¹ at a current density of 10 mA cm⁻². More importantly, a water-splitting device assembled with Pt/C/NF and V_0.09−Ni_0.91MOF/NF as cathode and anode yielded a cell voltage of 1.96 V@1000 mA cm⁻², thereby outperforming the-state-of-the-art RuO₂⁽⁺⁾||Pt/C⁽⁻⁾. Our work sheds new insight on preparing stable, efficient OER electrocatalysts and a promising method for designing various MOF-based materials.     

Electrodeposition of Defect-Rich Ternary NiCoFe Layered Double Hydroxides: Fine Modulation of Co3+ for Highly Efficient Oxygen Evolution Reaction

The low-cost, high-abundance and durable layered double hydroxides (LDHs) have been considered as promising electrocatalysts for oxygen evolution reaction (OER). However, the easy agglomeration of lamellar LDHs in the aqueous phase limits their practical applications. Herein, a series of ternary NiCoFe LDHs were successfully fabricated on nickel foam (NF) via a simple electrodeposition method. The as-prepared Ni(Co_0.5Fe_0.5)/NF displayed an unique nanoarray structural feature. It showed an OER overpotential of 209 mV at a current density of 10 mA cm⁻² in alkaline solution, which was superior to most systems reported so far. As evidenced by the XPS and XAFS results, such excellent performance of Ni(Co_0.5Fe_0.5)/NF was attributed to the higher Co³⁺/Co²⁺ ratio and more defects exposed, comparing with Ni(Co_0.5Fe_0.5)-bulk and Ni(Co_0.5Fe_0.5)-mono LDHs prepared by conventional coprecipitation method. Furthermore, the ratio of Co to Fe could significantly tune the Co electronic structure of Ni(Co_xFe_1-x)/NF composites (x=0.25, 0.50 and 0.75) and affect the electrocatalytic activity for OER, in which Ni(Co_0.5Fe_0.5)/NF showed the lowest energy barrier for OER rate-determining step (from O* to OOH*). This work proposes a facile method to develop high-efficiency OER electrocatalysts.     

Nanoscale Trimetallic Metal–Organic Frameworks Enable Efficient Oxygen Evolution Electrocatalysis

Metal–organic frameworks (MOFs) are a class of promising materials for diverse heterogeneous catalysis, but they are usually not directly employed for oxygen evolution electrocatalysis. Most reports focus on using MOFs as templates to in situ create efficient electrocatalysts through annealing. Herein, we prepared a series of Fe/Ni‐based trimetallic MOFs (Fe/Ni/Co(Mn)‐MIL‐53 accordingly to the Material of Institute Lavoisier) by solvothermal synthesis, which can be directly adopted as highly efficient electrocatalysts. The Fe/Ni/Co(Mn)‐MIL‐53 shows a volcano‐type oxygen evolution reaction (OER) activity as a function of compositions. The optimized Fe/Ni_2.4/Co_0.4‐MIL‐53 can reach a current density of 20 mA cm^?2 at low overpotential of 236 mV with a small Tafel slope of 52.2 mV dec^?1. In addition, the OER performance of these MOFs can be further enhanced by directly being grown on nickel foam (NF).     

Interface‐Engineered Ni(OH)2/β‐like FeOOH Electrocatalysts for Highly Efficient and Stable Oxygen Evolution Reaction

Iron‐based (oxy)hydroxides are especially attractive electrocatalysts for the oxygen evolution reaction (OER) owing to their earth abundance, low cost, and nontoxicity. However, poor OER kinetics on the surface restricts the performance of the FeOOH electrocatalyst. Herein, a highly efficient and stable Ni(OH)₂/β‐like FeOOH electrocatalyst is obtained by facile electroactivation treatment. The activated Ni(OH)₂/β‐like FeOOH sample indicates an overpotential of 300 mV at 10 mA cm⁻² for the OER, and no clear current decay after 50 h of testing; this is comparable to the most efficient nickel‐ and cobalt‐based electrocatalysts on planar substrates. Furthermore, studies suggest that β‐like FeOOH plays a key role in remarkably enhancing the performance during the electroactivation process owing to its metastable tunnel structure with a lower barrier for interface diffusion of Ni²⁺ ions between the bilayer electrocatalyst. This study develops a new strategy to explore efficient and low‐cost electrocatalysts and deepens understanding of bilayer electrocatalysts for the OER.     

Heterostructured Inter‐Doped Ruthenium–Cobalt Oxide Hollow Nanosheet Arrays for Highly Efficient Overall Water Splitting

The development of transition‐metal‐oxides (TMOs)‐based bifunctional catalysts toward efficient overall water splitting through delicate control of composition and structure is a challenging task. Herein, the rational design and controllable fabrication of unique heterostructured inter‐doped ruthenium–cobalt oxide [(Ru–Co)O_x] hollow nanosheet arrays on carbon cloth is reported. Benefiting from the desirable compositional and structural advantages of more exposed active sites, optimized electronic structure, and interfacial synergy effect, the (Ru–Co)O_x nanoarrays exhibited outstanding performance as a bifunctional catalyst. Particularly, the catalyst showed a remarkable hydrogen evolution reaction (HER) activity with an overpotential of 44.1 mV at 10 mA cm^?2 and a small Tafel slope of 23.5 mV dec^?1, as well as an excellent oxygen evolution reaction (OER) activity with an overpotential of 171.2 mV at 10 mA cm^?2. As a result, a very low cell voltage of 1.488 V was needed at 10 mA cm^?2 for alkaline overall water splitting.