Rational design of freestanding necklace-like ZnSe with double N-doped carbon layer protection for efficient sodium storage

ZnSe, as a promising electrode material for sodium storage, has a high theoretical capacity, low cost, and excellent physicochemical properties. The poor reaction kinetics and huge volume variation of ZnSe hinder its practical applications. Therefore, in this study, ZnSe electrode materials embedded in carbon nanofibers (ZnSe@NC@NCNFs) were synthesized through electrospinning and selenization using a Zn-based metal-organic framework (Zn-MOF) precursor. During the calcination process, the MOF-derived porous N-doped carbon layer wraps the ZnSe nanoparticles, and the one-dimensional (1D) carbon nanofiber forms a second N-doped carbon protective layer. The interwoven nanofibers can be severed as a freestanding electrode for sodium storage without conductive and binder agents. In situ X-ray diffraction (XRD) demonstrates the formation of irreversible NaZn₁₃ during the initial discharge process, which can act as sodiophilic sites and buffering matrices for subsequent Na⁺ insertion/extraction. The ZnSe@NC@NCNFs exhibit significant electrochemical performance for sodium storage with high reversible capacity and desired rate performance.     

NiSe2 nanoparticles encapsulated in CNTs covered and N-doped TiN/carbon nanofibers as a binder-free anode for advanced sodium-ion batteries

Metal selenides are promising anodes for sodium-ion batteries (SIBs) due to the high theoretical capacity through conversion reaction mechanism. However, developing metal selenides with superior electrochemical sodium-ion storage performance is still a great challenge. In this work, a novel composite material of free-standing NiSe₂ nanoparticles encapsulated in N-doped TiN/carbon composite nanofibers with carbon nanotubes (CNTs) in-situ grown on the surface (NiSe₂@N-TCF/CNTs) is prepared by electrospinning and pyrolysis technique. In this composite materials, NiSe₂ nanoparticles on the surface of carbon nanofibers were encapsulated into CNTs, thus avoiding aggregation. The in-situ grown CNTs not only improve the conductivity but also act as a buffer to accommodate the volume expansion. TiN inside the nanofibers further enhances the conductivity and structural stability of carbon-based nanofibers. When directly used as anode for SIBs, the NiSe₂@N-TCF/CNT electrode delivered a reversible capacity of 392.1 mAh/g after 1000 cycles and still maintained 334.4 mAh/g even at a high rate of 2 A/g. The excellent sodium-ion storage performance can be attributed to the fast Na⁺ diffusion and transfer rate and the pseudocapacitance dominated charge storage mechanism, as is evidenced by kinetic analysis. The work provides a novel approach to the fabrication of high-performance anode materials for other batteries.     

Chain engineering-tailored microstructures and lithium storage performance of hydrothermally-synthesized linear polyimides

Polyimides with high capacity, fast kinetics, abundant resource, and structural diversity offer an exhilarating opportunity for developing sustainable rechargeable batteries. Herein, a series of 1,4,5,8-naphthalenetetracarboxylic dianhydride (NTCDA)-based polyimides were successfully crafted through a facile and eco-friendly hydrothermal synthesis route. The microstructure and lithium storage performance of polyimides were tailored by regulating diamine linkers between NTCDA units. Interestingly, the moderate increased length of flexible diamine units with ethylenediamine and diaminobutane can stabilize the polymer skeleton. This leads to the formation of honeycomb-like porous structures with a sufficient exposure of active carbonyl groups, thereby achieving a large capacity and high rate capability. Therefore, polyimides derived from ethylenediamine and diaminobutane show larger reversible capacities (123 and 113.5 mA h/g at 50 mA/g, respectively) and better rate capabilities with capacity retentions of up to 50% when the current increased from 50 to 2000 mA/g. This work would provide new insights into macromolecular engineering of polymers for advanced electrode materials.     

A Multi-Wall Sn/SnO2@Carbon Hollow Nanofiber Anode Material for High-Rate and Long-Life Lithium-Ion Batteries

Multi-wall Sn/SnO₂@carbon hollow nanofibers evolved from SnO₂ nanofibers are designed and programable synthesized by electrospinning, polypyrrole coating, and annealing reduction. The synthesized hollow nanofibers have a special wire-in-double-wall-tube structure with larger specific surface area and abundant inner spaces, which can provide effective contacting area of electrolyte with electrode materials and more active sites for redox reaction. It shows excellent cycling stability by virtue of effectively alleviating pulverization of tin-based electrode materials caused by volume expansion. Even after 2000 cycles, the wire-in-double-wall-tube Sn/SnO₂@carbon nanofibers exhibit a high specific capacity of 986.3 mAh g⁻¹ (1 A g⁻¹) and still maintains 508.2 mAh g⁻¹ at high current density of 5 A g⁻¹. This outstanding electrochemical performance suggests the multi-wall Sn/SnO₂@ carbon hollow nanofibers are great promising for high performance energy storage systems.     

自支撑多孔碳/硒复合柔性电极的制备及其电化学性能

以二氧化硅（SiO₂）为模板,结合静电纺丝与溶胶-凝胶法制备了多孔碳纳米纤维膜（PCNFS）,再通过熔融扩散法负载硒,制备了一种柔性的碳/硒复合电极（Se@PCNFS）。结合X射线衍射（XRD）、扫描电子显微镜（SEM）和透射电子显微镜（TEM）对材料的微观结构和形貌进行表征,结果显示多孔碳纤维直径约300 nm,硒均匀地嵌入碳纤维膜的孔洞中。电化学测试结果表明,1Se@PCNFS电极在锂硒电池中表现出优异的循环性能和倍率性能。在0.5C倍率下,初始放电比容量达到569 mAh·g^-1,循环500次后比容量为340 mAh·g^-1;在2C倍率时,比容量为403 mAh·g^-1。     

In‐Situ Fabrication of Bone‐Like CoSe2 Nano‐Thorn Loaded on Porous Carbon Cloth as a Flexible Electrode for Na‐Ion Storage

Sodium‐ion batteries (SIBs) based on flexible electrode materials are being investigated recently for improving sluggish kinetics and developing energy density. Transition metal selenides present excellent conductivity and high capacity; nevertheless, their low conductivity and serious volume expansion raise challenging issues of inferior lifespan and capacity fading. Herein, an in‐situ construction method through carbonization and selenide synergistic effect is skillfully designed to synthesize a flexible electrode of bone‐like CoSe₂ nano‐thorn coated on porous carbon cloth. The designed flexible CoSe₂ electrode with stable structural feature displays enhanced Na‐ion storage capabilities with good rate performance and outstanding cycling stability. As expected, the designed SIBs with flexible BL?CoSe₂/PCC electrode display excellent reversible capacity with 360.7 mAh g^?1 after 180 cycles at a current density of 0.1 A g^?1.     

Porous carbon framework nested nickel foam as freestanding host for high energy lithium sulfur batteries

Constructing 3 D multifunctional conductive framework as stable sulfur cathode contributes to develop advanced lithium-sulfur(Li-S) batteries.Herein,a freestanding electrode with nickel foam framework and nitrogen doped porous carbon(PC) network is presented to encapsulate active sulfur for Li-S batteries.In such a mutually embedded architecture with high stability,the interconnected carbon network and nickel foam matrix can expedite ionic/electro nic tra nsport and sustain volume variations of sulfur.Furthermore,rationally designed porous structures provide sufficient internal space and large surface area for high active sulfur loading and polar polysulfides anchoring.Benefiting from the synergistic superiority,the Ni/PC-S cathode exhibits a high initial capacity of around 1200 mAh/g at 0.2 C,excelle nt rate perfo rmance,and high cycling stability with a low decay rate of 0.059% per cycle after 500 cycles.This work provides a useful strategy to exploit freestanding porous framework for diverse applications.     

Enabling Superior Electrochemical Properties for Highly Efficient Potassium Storage by Impregnating Ultrafine Sb Nanocrystals within Nanochannel‐Containing Carbon Nanofibers

Sb‐based nanocomposites are attractive anode materials for batteries as they exhibit large theoretical capacity and impressive working voltage. However, tardy potassium ion diffusion characteristics, unstable Sb/electrolyte interphase, and huge volume variation pose a challenge, hindering their practical use for potassium‐ion batteries (PIBs). Now, a simple robust strategy is presented for uniformly impregnating ultrasmall Sb nanocrystals within carbon nanofibers containing an array of hollow nanochannels (denoted u‐Sb@CNFs), resolving the issues above and yielding high‐performance PIBs. u‐Sb@CNFs can be directly employed as an anode, thereby dispensing with the need for conductive additives and binders. Such a judiciously crafted u‐Sb@CNF‐based anode renders a set of intriguing electrochemical properties, representing large charge capacity, unprecedented cycling stability, and outstanding rate performance. A reversible capacity of 225 mAh g^?1 is retained after 2000 cycles at 1 A g^?1.     

A Multi‐Wall Sn/SnO2@Carbon Hollow Nanofiber Anode Material for High‐Rate and Long‐Life Lithium‐Ion Batteries

Multi‐wall Sn/SnO₂@carbon hollow nanofibers evolved from SnO₂ nanofibers are designed and programable synthesized by electrospinning, polypyrrole coating, and annealing reduction. The synthesized hollow nanofibers have a special wire‐in‐double‐wall‐tube structure with larger specific surface area and abundant inner spaces, which can provide effective contacting area of electrolyte with electrode materials and more active sites for redox reaction. It shows excellent cycling stability by virtue of effectively alleviating pulverization of tin‐based electrode materials caused by volume expansion. Even after 2000 cycles, the wire‐in‐double‐wall‐tube Sn/SnO₂@carbon nanofibers exhibit a high specific capacity of 986.3 mAh g^?1 (1 A g^?1) and still maintains 508.2 mAh g^?1 at high current density of 5 A g^?1. This outstanding electrochemical performance suggests the multi‐wall Sn/SnO₂@ carbon hollow nanofibers are great promising for high performance energy storage systems.     

炭-/石墨烯量子点在超级电容器中的应用

炭-/石墨烯量子点作为新兴的炭纳米材料,因具有独特的小尺寸效应和丰富的边缘活性位点而在高性能超级电容器电极材料的研发方面展现出巨大潜力。针对目前炭-/石墨烯量子点在超级电容器电极材料方面的应用优势和存在的关键问题,本文以炭-/石墨烯量子点、量子点/导电炭复合材料、量子点/金属氧化物复合材料、量子点/导电聚合物复合材料以及量子点衍生炭这些电极材料为脉络,梳理了近年来该领域的发展状况,尝试阐释炭-/石墨烯量子点在电极材料、复合材料和衍生炭电极材料中所起到的关键作用,最后对炭-/石墨烯量子点电极材料的发展进行了展望。本综述以期为炭-/石墨烯量子点基电极材料的研究提供一定参考和依据。     

A high performance solid-state asymmetric supercapacitor based on Anderson-type polyoxometalate-doped graphene aerogel

The manufacture of single-atom transition metal-doping carbon nanocomposites as electrode materials is crucial for electrochemical energy storage with high energy and power density. However, the simple strategy for preparation of such active materials with controlled structure remains a great challenge. Here, cobalt-doped carbon nanocomposites (Co-POM/rGO) were synthesized successfully by deposition of Anderson-type polyoxometalate (POM) on the surface of reduced graphene oxide (rGO) aerogel via one-pot hydrothermal treatment. The resulting Co-POM/rGO possesses three-dimensional graphene-based frameworks with hierarchical porous structure, high surface area and uniform single-atom metal doping. These intriguing features render Co-POM/rGO to be a promising electrode for applications in electrochemical energy storage. As an electrode material of a supercapacitor, Co-POM/rGO shows high-performance electrochemical energy storage (211.3 F g^?1 at 0.5 A g^?1). Furthermore, the solid-state asymmetric supercapacitor (ASC) device, using Co-POM/rGO as a positive electrode, exhibits the outstanding energy density of 37.6 Wh kg^?1 at a power density of 500 W kg^?1, and high capacitance retention of 95.2% after 5000 charge–discharge cycles. These results indicate that the proposed strategy for rational design of single-atom-metal doped carbon nanocomposites for flexible ASC devices with excellent capacitive properties.

     

钠离子电池炭基负极材料研究进展

钠离子电池是目前新兴的低成本储能技术,因在大规模电化学储能中具有较好的应用前景而受到了国内外学者广泛的关注与研究。作为钠离子电池的关键电极材料之一,非石墨的炭质材料因具有储钠活性高、成本低廉、无毒无害等诸多优点,而被认为是钠离子电池实际应用时负极的最佳选择。本文详细综述了目前钠离子电池炭基负极材料的研究进展,重点介绍了炭质材料的储钠机理与特性,分析了炭材料结构与电化学性能之间的关系,探讨了其存在的问题,为钠离子电池炭基负极材料的发展提供有益的认识。     

Embedding antimony nanoparticles into metal–organic framework derived TiO2@carbon nanotablets for high-performance sodium storage

Titanium dioxide (TiO₂) has been widely investigated as a candidate for anode materials of sodium-ion batteries (SIBs) due to its low cost and high abundance. However, the intrinsic sluggish ion/electron transfer rate hinders its practical applications for high energy density storage devices. In contrast, antimony (Sb) shows high specific theoretical capacity (660 mAh/g) as well as excellent electron conductivity, but the large volume variation upon cycling usually leads to severe capacity fading. Herein, with the objective of achieving high-performance sodium storage anode materials, TiO₂@C-Sb nanotablets with a small amount of Sb content (6.4 wt%) are developed through calcination Ti-metal–organic framework (MIL-125) derived TiO₂@C/SbCl₃ mixture under reductive atmosphere. Benefitting from the synergetic effect of well-dispersed Sb nanoparticles as well as robust porous TiO₂@C substrate, the TiO₂@C-Sb shows enhanced electron/ion transfer rate and predominantly pseudocapacitive sodium storage behavior, delivering a reversible capacity of 219 mAh/g at 0.5 A/g even after 1000 cycles. More significantly, this method may be commonly used to incorporate other alloy-based high-theoretical materials into MIL-125-derived TiO₂@C, which is promising for developing high-energy-density TiO₂-based energy storage devices.     

Needle-like cobalt phosphide arrays grown on carbon fiber cloth as a binder-free electrode with enhanced lithium storage performance

Cobalt phosphide(CoP) is a promising anode candidate for lithium-ion batteries(LIBs) due to its high specific capacity and low working potential.However,the poor cycling stability and rate performance,caused by low electrical conductivity and huge volume variation,impede the further practical application of CoP anode materials.Herein,we report an integrated binder-free electrode featuring needle-like CoP arrays grown on carbon fiber cloth(CC) for efficient lithium storage.The as-prepared CoP/CC electrode integrates the advantages of 1 D needle-like CoP arrays for efficient electrolyte wettability and fast cha rge transpo rtation,and 3 D CC substrate for superior mechanical stability,flexibility and high conductivity.As a result,the CoP/CC electrode delivers an initial specific capacity of 1283 mAh/g and initial Coulombic effeciencies of 85.4%,which are much higher than that of conventional CoP electrode.Notably,the Co P/CC electrode shows outstanding cycling performance up to 400 cycles at 0.5 A/cm² and excellent rate performance with a discharge capacity of 549 mAh/g even at 5 A/cm².This work demonstrates the great potential of integrated CoP/CC hybrid as efficient bind-free and freestanding electrode for LIBs and future flexible electronic devices.     

钾离子电池负极的高性能潜在材料:锑

近年来随着对储能器件的需求增加,钾离子电池受到越来越多的关注。钾的物理化学性质与锂相似,且在地壳中的储量丰富,在储能领域中具有广阔的发展前景。但由于电极材料实际容量远小于理论容量等问题的存在导致应用在钾离子电池的性能仍有不足。金属锑(Sb)具有较高的理论容量被广泛应用在电极材料上,然而在充放电过程体积变化过大导致稳定性较差,需要通过形貌控制、合金化、与碳材料复合等形式来提高结构稳定性。本文主要介绍了Sb材料在钾离子电池负极材料的研究进展,并展望了Sb电极材料的应用前景。     

Polyimide-derived carbon nanofiber membranes as anodes for high-performance flexible lithium ion batteries

Heteroatoms-doped carbon nanofiber membranes with flexible features were prepared by electrospinning with heterocyclic polyimide (PI) structures containing biphenyl and pyrimidine rings. The products with optimized treatment could achieve 695 mAh/g at 0.1 A/g and retain 245 mAh/g at 1.5 A/g after 300 cycles when used as anode for Li-ion batteries.     

Unveiling the Advances of Nanostructure Design for Alloy‐Type Potassium‐Ion Battery Anodes via In Situ TEM

Nanostructure design and in situ transmission electron microscopy (TEM) are combined to demonstrate Sb‐based nanofibers composed of bunched yolk–shell building units as a significantly improved anode for potassium‐ion batteries (PIBs). Particularly, a metal–organic frameworks (MOFs)‐engaged electrospinning strategy coupled to a confined ion‐exchange followed by a subsequent thermal reduction is proposed to fabricate yolk–shell Sb@C nanoboxes embedded in carbon nanofibers (Sb@CNFs). In situ TEM analysis reveals that the inner Sb nanoparticles undergo a significant volume expansion/contraction during the alloying/dealloying processes, while the void space can effectively relieve the overall volume change, and the plastic carbon shell maintains the structural integrity of electrode material. This work provides an important reference for the application of advanced characterization techniques to guide the optimization of electrode material design.     

Natural nanomaterial as hard template for scalable synthesizing holey carbon naonsheet/nanotube with in-plane and out-of-plane pores for electrochemical energy storage

By tuning the structure of hard template kaolinite, we have achieved a template directed synthesis of holey carbon nanosheet/nanotube material. This carbon nanomaterial with in-plane and out-of-plane pores has shown promising electrochemical energy storage capacity.     

用于高性能钠离子电容器的高氮掺杂多孔碳纳米纤维的简易合成

选择合适的生物质材料是获得功能碳材料的有效途径之一。通过柠檬酸钾和三聚氰胺一步热解法制备高氮掺杂多孔碳纳米纤维(NPCF)。在电流密度为0.1和1.0 A·g^-1时,NPCF电极的容量分别为218和140 mAh·g^-1。同时,具有NPCF阳极的钠离子电容器(SIC)在1.0 A·g^-1下表现出优异的倍率性能和超长的使用寿命,可循环超过2 500次。     

用于高性能钠离子电容器的高氮掺杂多孔碳纳米纤维的简易合成

选择合适的生物质材料是获得功能碳材料的有效途径之一。通过柠檬酸钾和三聚氰胺一步热解法制备高氮掺杂多孔碳纳米纤维(NPCF)。在电流密度为0.1和1.0 A·g^-1时,NPCF电极的容量分别为218和140 mAh·g^-1。同时,具有NPCF阳极的钠离子电容器(SIC)在1.0 A·g^-1下表现出优异的倍率性能和超长的使用寿命,可循环超过2 500次。