Defects Promote Ultrafast Charge Separation in Graphitic Carbon Nitride for Enhanced Visible-Light-Driven CO2 Reduction Activity

Fundamental photocatalytic limitations of solar CO₂ reduction remain due to low efficiency, serious charge recombination, and short lifetime of catalysts. Herein, two-dimensional graphitic carbon nitride nanosheets with nitrogen vacancies (g-C₃N_x) located at both three-coordinate N atoms and uncondensed terminal NH_x species were prepared by one-step tartaric acid-assistant thermal polymerization of dicyandiamide. Transient absorption spectra revealed that the defects in g-C₃N₄ act as trapped states of charges to result in prolonged lifetimes of photoexcited charge carriers. Time-resolved photoluminescence spectroscopy revealed that the faster decay of charges is due to the decreased interlayer stacking distance in g-C₃N_x in favor of hopping transition and mobility of charge carriers to the surface of the material. Owing to the synergic virtues of strong visible-light absorption, large surface area, and efficient charge separation, the g-C₃N_x nanosheets with negligible loss after 15 h of photocatalysis exhibited a CO evolution rate of 56.9 μmol g⁻¹ h⁻¹ under visible-light irradiation, which is roughly eight times higher than that of pristine g-C₃N₄. This work presents the role of defects in modulating light absorption and charge separation, which opens an avenue to robust solar-energy conversion performance.     

Engineering oxygen into ultrathin graphitic carbon nitride: synergistic improvement of electron reduction and charge carrier dynamics for efficient photocatalysis

The fast separation rate of photogenerated carriers and the high utilization of sunlight are still a major challenge that restricts the practical application of carbon nitride (g-C₃N₄) materials in the field of photocatalytic hydrogen (H₂) evolution. Here, ultrathin oxygen (O) engineered g-C₃N₄ (named UOCN) was successfully obtained by a facial gaseous template sacrificial agent-induced bottom-up strategy. The synergy of O doping and exfoliating bulk into an ultrathin structure is reported to simultaneously achieve high-efficiency separation of photogenerated carriers, enhance the utilization of sunlight, and improve the reduction ability of electrons to promote photocatalytic H₂ evolution of UOCN. As a proof of concept, UOCN affords enhanced photocatalytic H₂ evolution (93.78 μmol h^?1) under visible light illumination, which was significantly better than that of bulk carbon nitride (named CN) with the value of 9.23 μmol h^?1. Furthermore, the H₂ evolution rate of UOCN at a longer wavelength (λ = 450 nm) was up to 3.92 μmol h^?1 due to its extended light absorption range. This work presents a practicable strategy of coupling O dopants with ultrathin structures about g-C₃N₄ to achieve efficient photocatalytic H₂ evolution. This integrated engineering strategy can develop a unique example for the rational design of innovative photocatalysts for energy innovation.     

Novel PtPd alloy nanoparticle-decorated g-C3N4 nanosheets with enhanced photocatalytic activity for H2 evolution under visible light irradiation

PtPd bimetallic alloy nanoparticle (NP)-modified graphitic carbon nitride (g-C₃N₄) nanosheet photocatalysts were synthesized via chemical deposition precipitation. Characterization of the photocatalytic H₂ evolution of the g-C₃N₄ nanosheets shows that it was significantly enhanced when PtPd alloy NPs were introduced as a co-catalyst. The 0.2 wt% PtPd/g-C₃N₄ composite photocatalyst gave a maximum H₂ production rate of 1600.8 μmol g^–1 h^–1. Furthermore, when K₂HPO₄ was added to the reaction system, the H₂ production rate increased to 2885.0 μmol g^–1 h^–1. The PtPd/g-C₃N₄ photocatalyst showed satisfactory photocatalytic stability and was able to maintain most of its photocatalytic activity after four experimental photocatalytic cycles. In addition, a possible mechanism for the enhanced photocatalytic activity was proposed and verified by various photoelectric techniques. These results demonstrate that the synergistic effect between PtPd and g-C₃N₄ helps to greatly improve the photocatalytic activity of the composite photocatalyst.     

Cascaded electron transition proved by femto-second transient absorption spectroscopy for enhanced photocatalysis hydrogen generation

Regulating flow direction of photo-excited electrons from interior to active sites in surface is critical to enhance the photocatalytic performance. Herein, photoinduced chemical reduction process was utilized to pinpoint deposit CdS and NiS nanodots sequentially onto g-C₃N₄ nanosheets. The resulted hybrid composite NiS/CdS/g-C₃N₄ was much more active under visible light, and eventually boosted the hydrogen evolution rate of 3015 μmol g^?1 h^?1, to be 2.4 folds better than that of g-C₃N₄. Because of the relative low content of CdS (around 3.0 wt%), the enhanced activity is due to the favoring band overlapping and promoting charge separation rather than increasing light absorption. Femto-second time-resolved transient absorption spectroscopy (fs-TAS) clearly reveals that the photo-excited electrons are from g-C₃N₄, and then migrate unidirectionally to CdS and finally to NiS, which is caused by the precisely regulate the position of CdS and NiS on g-C₃N₄ surface. This study elucidates the electron transfer kinetics and processes in multi-component system and affords a new avenue to construct stable photocatalysts with high activity.     

Tuning band structure of graphitic carbon nitride for efficient degradation of sulfamethazine: Atmospheric condition and theoretical calculation

Numerous approaches have been used to modify graphitic carbon nitride（g-C₃N₄） for improving its photocatalytic activity. In this study, we demonstrated a facial post-calcination method for modified graphitic carbon nitride（g-C₃N₄-Ar/Air） to direct tuning band structure, i.e., bandgap and positions of conduction band（CB）/valence band（VB）, through the control of atmospheric condition without involving any additional elements or metals or semiconductors. ...     

Vinylene-Linked Covalent Organic Frameworks (COFs) with Symmetry-Tuned Polarity and Photocatalytic Activity

The polarity of a semiconducting molecule affects its intrinsic photophysical properties, which can be tuned by varying the molecular geometry. Herein, we developed a D_3h-symmetric tricyanomesitylene as a new monomer which could be reticulated into a vinylene-linked covalent organic framework (g-C₅₄N₆-COF) via Knoevenagel condensation with another D_3h-symmetric monomer 2,4,6-tris(4′-formyl-biphenyl-4-yl)-1,3,5-triazine. Replacing tricyanomesitylene with a C_2v-symmetric 3,5-dicyano-2,4,6-trimethylpyridine gave a less-symmetric vinylene-linked COF (g-C₅₂N₆-COF). The octupolar conjugated characters of g-C₅₄N₆-COF were reflected in its scarce solvatochromic effects either in ground or excited states, and endowed it with more promising semiconducting behavior as compared with g-C₅₂N₆-COF, such as enhanced light-harvesting and excellent photo-induced charge generation and separation. Along with the matched energy level, g-C₅₄N₆-COF enabled the two-half reactions of photocatalytic water splitting with an average O₂ evolution rate of 51.0 μmol h⁻¹ g⁻¹ and H₂ evolution rate of 2518.9 μmol h⁻¹ g⁻¹. Such values are among the highest of state-of-the-art COF photocatalysts.     

Graphitic Carbon Nitride/Nitrogen‐Rich Carbon Nanofibers: Highly Efficient Photocatalytic Hydrogen Evolution without Cocatalysts

An interconnected framework of mesoporous graphitic‐C₃N₄ nanofibers merged with in situ incorporated nitrogen‐rich carbon has been prepared. The unique composition and structure of the nanofibers as well as strong coupling between the components endow them with efficient light‐harvesting properties, improved charged separation, and a multidimensional electron transport path that enhance the performance of hydrogen production. The as‐obtained catalyst exhibits an extremely high hydrogen‐evolution rate of 16885 μmol h^?1 g^?1, and a remarkable apparent quantum efficiency of 14.3 % at 420 nm without any cocatalysts, which is much higher than most reported g‐C₃N₄‐based photocatalysts even in the presence of Pt‐based cocatalysts.     

Carbon Quantum Dot Implanted Graphite Carbon Nitride Nanotubes: Excellent Charge Separation and Enhanced Photocatalytic Hydrogen Evolution

Graphite carbon nitride (g‐C₃N₄) is a promising candidate for photocatalytic hydrogen production, but only shows moderate activity owing to sluggish photocarrier transfer and insufficient light absorption. Herein, carbon quantum dots (CQDs) implanted in the surface plane of g‐C₃N₄ nanotubes were synthesized by thermal polymerization of freeze‐dried urea and CQDs precursor. The CQD‐implanted g‐C₃N₄ nanotubes (CCTs) could simultaneously facilitate photoelectron transport and suppress charge recombination through their specially coupled heterogeneous interface. The electronic structure and morphology were optimized in the CCTs, contributing to greater visible light absorption and a weakened barrier of the photocarrier transfer. As a result, the CCTs exhibited efficient photocatalytic performance under light irradiation with a high H₂ production rate of 3538.3 μmol g^?1 h^?1 and a notable quantum yield of 10.94 % at 420 nm.     

Semi-chemical interaction between graphitic carbon nitride and Pt for boosting photocatalytic hydrogen evolution

Owing to the exorbitant overpotential and serious carrier recombination of graphitic carbon nitride （gC₃N₄）,noble metal （NM） is usually served as the H₂evolution co-catalyst.Although the NM （such as Pt）nanoparticles can reduce the H₂evolution overpotential,the weak van der Waals interaction between Pt and g-C₃N₄makes against the charge transfer.Herein,the solvothermal method is developed to achieve semi-chemical interaction betwee...     

Efficient Visible‐Light‐Driven Carbon Dioxide Reduction by a Single‐Atom Implanted Metal–Organic Framework

Modular optimization of metal–organic frameworks (MOFs) was realized by incorporation of coordinatively unsaturated single atoms in a MOF matrix. The newly developed MOF can selectively capture and photoreduce CO₂ with high efficiency under visible‐light irradiation. Mechanistic investigation reveals that the presence of single Co atoms in the MOF can greatly boost the electron–hole separation efficiency in porphyrin units. Directional migration of photogenerated excitons from porphyrin to catalytic Co centers was witnessed, thereby achieving supply of long‐lived electrons for the reduction of CO₂ molecules adsorbed on Co centers. As a direct result, porphyrin MOF comprising atomically dispersed catalytic centers exhibits significantly enhanced photocatalytic conversion of CO₂, which is equivalent to a 3.13‐fold improvement in CO evolution rate (200.6 μmol g^?1 h^?1) and a 5.93‐fold enhancement in CH₄ generation rate (36.67 μmol g^?1 h^?1) compared to the parent MOF.     

Hydrocarbon production by addition of Cu-ZnO on g-C3N4 for CO2 conversion

In this study, copper/zinc oxide/graphite nitrogen carbide (Cu/ZnO/g-C₃N₄) is prepared using a hydrothermal method and applied as a photocatalyst for CO₂ photoreduction. The morphology and structural properties of the obtained Cu/ZnO/g-C₃N₄ are systematically characterized through X-ray powder diffraction, ultraviolet–visible absorption spectroscopy, transmission electronic microscopy, and photoluminescence spectroscopy. A 3 wt% Cu/ZnO/g-C₃N₄ photocatalyst exhibits high CH₄ (40.7 μmol g⁻¹ hr⁻¹), CO (65.1 μmol g⁻¹ hr⁻¹), and CH₃OH (92.5 μmol g⁻¹ hr⁻¹) production rates, which are 38.3, 77.1, and 58.1 fold higher than the pure g-C₃N₄. The production rate is higher than those for bulk g-C₃N₄ and ZnO/g-C₃N₄. Finally, the reaction mechanism of Cu/ZnO/C₃N₄ is proposed in this study.     

Multifunctional Nitrogen‐Doped Carbon Nanodots for Photoluminescence,Sensor, and Visible‐Light‐Induced H2 Production

Herein, multifunctional N‐doped carbon nanodots (NCNDs) were prepared through the one‐step hydrothermal treatment of yeast. Results show that the NCNDs can be used as a new photocatalyst to drive the water‐splitting reaction under UV light. Moreover, the NCNDs can efficiently catalyze the hydrogen evolution reaction. Under visible‐light irradiation, Eosin Y‐sensitized NCNDs exhibit excellent activity for hydrogen evolution. The hydrogen evolution rate of NCNDs (without any modification and co‐catalyst) reaches 107.1 μmol h^?1 (2142 μmol g^?1 h^?1). When Pt is loaded on the NCNDs, the hydrogen evolution rate reaches 491.2 μmol h^?1 (9824 μmol g^?1 h^?1) under visible‐light irradiation. In addition, the NCNDs show excellent fluorescent properties and can be applied as a fluorescent probe for the sensitive and selective detection of Fe³⁺.     

Hydrogen production and photocatalytic activity of g-C3N4/Co-MOF (ZIF-67) nanocomposite under visible light irradiation

Herein, cobalt (Co)-based metal–organic zeolitic imidazole frameworks (ZIF-67) coupled with g-C₃N₄ nanosheets synthesized via a simple microwave irradiation method. SEM, TEM and HR-TEM results showed that ZIF-67 were uniformly dispersed on g-C₃N₄ surfaces and had a rhombic dodecahedron shape. The photocatalytic properties of g-C₃N₄/ZIF-67 nanocomposite were evaluated by photocatalytic dye degradation of crystal violet (CV), 4-chlorophenol (4-CP) and photocatalytic hydrogen (H₂) production. In presence of visible light illumination, the photocatalytic dye results showed that 95% CV degradation and 53% 4-CP degradation within 80 min. The H₂ production of the g-C₃N₄/ZIF-67 composite was 2084 μmol g⁻¹, which is 3.84 folds greater than that of bare g-C₃N₄ (541 μmol g⁻¹).     

HKUST-1 Derived Hollow C-Cu2−xS Nanotube/g-C3N4 Composites for Visible-Light CO2 Photoreduction with H2O Vapor

As the main component of syngas, reducing CO₂ to CO with high selectivity through photocatalysis could provide a sustainable way to alleviate energy shortage issues. Developing a photocatalytic system with low cost and high performance that is environmentally friendly is the ultimate goal towards CO₂ photoreduction. Herein, an efficient and economic three-component heterojunction photocatalyst is designed and fabricated for converting CO₂ to CO in the absence of organic sacrificial agents. The heterojunction is made of Cu_2−xS nanotubes coated with a carbon layer (C-Cu_2−xS) and g-C₃N₄. By using the classical MOF material HKUST-1 as a precursor, hollow tubular-like metal sulfides (C-Cu_2−xS) with carbon coating were synthesized and further loaded on g-C₃N₄, forming a three-component heterojunction C-Cu_2−xS@g-C₃N₄. The carbon coat in C-Cu_2−xS@g-C₃N₄ acts as an electron reservoir, which facilitates electron–hole pair separation. The optimized C-Cu_2−xS@g-C₃N₄ acted as a photocatalyst in CO₂ reduction with a high reactivity of 1062.6 μmol g⁻¹ and selectivity of 97 %. Compared with bare g-C₃N₄ (158.4 μmol g⁻¹) and C-Cu_2−xS, the reactivity is nearly 7 and 23-fold enhanced and this CO generation rate is higher than most of the reported Cu₂S or g-C₃N₄ composites under similar conditions. The prominent activity may result from enhanced light adsorption and effective charge separation. This work might open up an alternative method for the design and fabrication of high-performance and low-cost photocatalysts for efficiently and durably converting CO₂ to CO with high selectivity.     

Integrating non-precious-metal cocatalyst Ni3N with g-C3N4 for enhanced photocatalytic H2 production in water under visible-light irradiation

Photocatalytic H₂ production via water splitting in a noble-metal-free photocatalytic system has attracted much attention in recent years. In this study, noble-metal-free Ni₃N was used as an active cocatalyst to enhance the activity of g-C₃N₄ for photocatalytic H₂ production under visible-light irradiation (λ > 420 nm). The characterization results indicated that Ni₃N nanoparticles were successfully loaded onto the g-C₃N₄, which accelerated the separation and transfer of photogenerated electrons and resulted in enhanced photocatalytic H₂ evolution under visible-light irradiation. The hydrogen evolution rate reached ～305.4 μmol h^?1 g^?1, which is about three times higher than that of pristine g-C₃N₄, and the apparent quantum yield (AQY) was ～0.45% at λ = 420. Furthermore, the Ni₃N/g-C₃N₄ photocatalyst showed no obvious decrease in the hydrogen production rate, even after five cycles under visible-light irradiation. Finally, a possible photocatalytic hydrogen evolution mechanism for the Ni₃N/g-C₃N₄ system is proposed.     

An Elemental Phosphorus Photocatalyst with a Record High Hydrogen Evolution Efficiency

Semiconductive property of elementary substance is an interesting and attractive phenomenon. We obtain a breakthrough that fibrous phase red phosphorus, a recent discovered modification of red phosphorus by Ruck et al., can work as a semiconductor photocatalyst for visible‐light‐driven hydrogen (H₂) evolution. Small sized fibrous phosphorus is obtained by 1) loading it on photoinactive SiO₂ fibers or by 2) smashing it ultrasonically. They display the steady hydrogen evolution rates of 633 μmol h^?1 g^?1 and 684 μmol h^?1 g^?1, respectively. These values are much higher than previous amorphous P (0.6 μmol h^?1 g^?1) and Hittorf P (1.6 μmol h^?1 g^?1). Moreover, they are the highest records in the family of elemental photocatalysts to date. This discovery is helpful for further understanding the semiconductive property of elementary substance. It is also favorable for the development of elemental photocatalysts.     

A Metal-Organic-Framework-Derived g-C3N4/α-Fe2O3 Hybrid for Enhanced Visible-Light-Driven Photocatalytic Hydrogen Evolution

As one of the most efficient systems for photocatalytic hydrogen evolution, the Z-Scheme system, consisting of different semiconductors with a reversible donor–acceptor pair, has attracted great attention. Considering the non-toxicity and low cost of photocatalysts, a series of g-C₃N₄/α-Fe₂O₃ hybrids were rationally constructed based on the Z-Scheme mechanism for the first time, using a metal-organic framework template approach that can fine tune the compositions and properties of the hybrids. An optimized hybrid, g-C₃N₄/α-Fe₂O₃-2, exhibited prominent photocatalytic water splitting performance with a visible light response. Under irradiation of visible light (λ>420 nm), the hybrid shows a high durability and superior hydrogen production rate of 2066.2 μmol g⁻¹ h⁻¹ from water splitting, which is approximately three times greater than that of bulk g-C₃N₄ because of the effective separation of photo-excited charge carriers by two narrow band gap semiconductors, tightly coupled with the Z-Scheme structural feature.     

二氨基马来腈共聚合改性氮化碳光催化剂

利用二氨基马来腈(DMNA)与二聚氰胺(DCDA)的高温共聚合反应, 制备了石墨相氮化碳 (g-C₃N₄), 并通过X射线衍射(XRD)、傅里叶变换红外(FT-IR)光谱、透射电镜 (TEM)、氮气吸脱附实验 (N₂-sorption)、电子顺磁共振 (EPR)、紫外-可见漫反射光谱 (UV-Vis DRS) 和荧光 (PL) 光谱等表征手段,系统考察了共聚合改性对g-C₃N₄晶体结构、化学结构、能带结构、织构、光吸收性能和光催化性能等的影响.研究结果表明:共聚合改性后氮化碳材料仍保持石墨相晶体结构, 但其π电子的离域性增强, 并在催化剂表面产生异质结构, 进而提高了氮化碳在可见光区域的光吸收性能, 并促进了光生载流子的有效分离. 性能评价结果显示, DMNA改性的氮化碳在可见光下光催化产氢活性明显高于未改性的样品, 当DMNA用量为0.01g时, 催化剂的产氢速率最高, 达到45.0 μmol·h^-1, 为纯氮化碳样品的4.5倍.     

Efficient Solar‐Driven Nitrogen Fixation over Carbon–Tungstic‐Acid Hybrids

Ammonia synthesis under mild conditions is of supreme interest. Photocatalytic nitrogen fixation with water at room temperature and atmospheric pressure is an intriguing strategy. However, the efficiency of this method has been far from satisfied for industrialization, mainly due to the sluggish cleavage of the N≡N bond. Herein, we report a carbon–tungstic‐acid (WO₃ ? H₂O) hybrid for the co‐optimization of N₂ activation as well as subsequent photoinduced protonation. Efficient ammonia evolution reached 205 μmol g^?1 h^?1 over this hybrid under simulated sunlight. Nitrogen temperature‐programmed desorption revealed the decisive role of carbon in N₂ adsorption. Photoactive WO₃ ? H₂O guaranteed the supply of electrons and protons for subsequent protonation. The universality of carbon modification for enhancing the N₂ reduction was further verified over various photocatalysts, shedding light on future materials design for ideal solar energy utilization.     

The facile synthesis of graphitic carbon nitride from amino acid and urea for photocatalytic H<Subscript>2</Subscript> production

We report on the facile synthesis of g-C₃N₄ based polymers by co-condensing urea with glycine for photocatalytic hydrogen evolution. The as-prepared photocatalysts were then characterized by powder X-ray diffraction, Fourier transform infrared spectroscopy, UV–Vis diffuse reflectance spectroscopy, photoluminescence emission spectrometry, electron paramagnetic resonance spectrometry and transmission electron microscopy. Compared with pristine g-C₃N₄, obtained from direct pyrolysis of urea, the CNU-G₅ photocatalyst showed largely enhanced photocatalytic H₂ activities about 75 μmol h^?1, which is 5 times higher than of the pristine CNU. The enhanced activities are ascribed to the larger specific area surface, strengthened optical absorption and improved electron transport ability. Our work opens up a new pathway for the synthesis graphitic carbon nitride photocatalysts with glycine modification to enhance photocatalytic activities.