A liquid chromatography-mass spectrometry method for the quantitation of aristololactam-I in rat plasma

A sensitive method with liquid chromatography-electrospray ionization mass spectrometry has been developed and validated for the determination of aristololactam-I in rat plasma after oral administration of aristolochic acid-I using finesteride as the internal standard. Chromatographic separation was achieved on a Lichrospher C(18) column using methanol:0.05% acetic acid in water (71:29, v/v) as a mobile phase delivered at a flow rate of 1 mL/min. The assay was linear for aristololactam-I over the range 0.3-300 ng/mL. The analysis of quality control samples demonstrated precision with coefficient of variation less than 20% (n = 5). Absolute recovery of aristololactam-I was 90.4-97.3%. The LC-MS method for the determination of aristololactam-I is sensitive, specific and can be used to investigate the toxicokinetics of aristololactam-I.     

On-line turbulent-flow chromatography-high-performance liquid chromatography-mass spectrometry for fast sample preparation and quantitation

A sensitive and selective liquid chromatography-mass spectrometry method has been developed for the simultaneous identification and quantitation of drug substances and metabolites in rat plasma. The method combines on-line turbulent-flow chromatography, high-performance liquid chromatography and mass spectrometry. This combination is considered to be a new approach suitable for fast bio-analysis in drug discovery. Dextromethorphan, and its two metabolites, dextrorphan and 3-methoxymorphinan served as model substances. The analytes present in plasma were collected on a Cyclone column using turbulent-flow chromatography and were subsequently transferred on-line to and focused on an X-Terra MS C8 column. The analytes were eluted by a linear gradient and detected by a fast scanning mass spectrometer. The detector response was quadratic and the dynamic range was estimated to be 0.5-100 ng/ml plasma or 12.5 pg to 2.50 ng injected into the system.     

Particle beam liquid chromatography-mass spectrometry on a double-focusing sector instrument

A commercially available particle beam interface developed by the Vestec Corporation has been coupled to a double-focusing high-resolution mass spectrometer (VG ZAB 2F) via a momentum separator. An ultraviolet detector was in-line with the interface and allowed monitoring of the eluting materials. With this instrumentation, complete electron-impact (EI) mass spectra on synthetic mixtures of steroids, nucleosides, and several derivatives of amino acids were recorded. Amongst these the EI mass spectra of 2,4-dinitrophenyl, 9-fluorenylmethoxycarbonyl and phenylthiohydantoin derivatives were obtained. The standard LC conditions used here (250 mm x 4.6 mm I.D., reversed-phase C18 column, 1.0 or 1.5 ml/min flow-rate, isocratic or gradient programming) allowed separation of the mixtures. The resulting mass spectra were compared with those obtained using a direct insertion probe. The agreement was excellent in most cases. Sensitivity measurements were performed on cholesterol and caffeine. A complete low-resolution mass spectrum can be obtained on 100 ng of cholesterol. Single-ion monitoring of the M+.of 200 pg of caffeine gave a 4:1 signal-to-noise ratio at m/z 194. Complete high-resolution mass spectra were obtained on 5 micrograms of cholesterol (loop injection) and on every peak of a five-steroid mixture of 5 micrograms each. The accuracy of the mass measurements were better than 5 m.m.u. for most cases. Three to four scans could be obtained for each liquid chromatographic peak. Mass-analyzed ion kinetic energy spectra were recorded on the M+.of 2.5 micrograms of cholesterol at m/z 386. Similarly the B/E linked scan of the same ion was recorded on 2.5 micrograms and 500 ng.     

2,4-Dinitro-3,5,6-trideuterophenylhydrazones for the quantitation of aldehydes and ketones in air samples by liquid chromatography-mass spectrometry

The quantification of carbonyl compounds in air samples using an internal calibration approach with stable isotope-labelled standards and HPLC-atmospheric pressure chemical ionization MS analysis is presented. 2,4-Dinitro-3,5,6-trideuterophenylhydrazine and various of its hydrazones have been synthesized and characterized for the first time. The respective stable isotope-labelled hydrazones of a series of aldehydes and ketones are applied as internal standards for the determination of the carbonyls in car exhaust samples. Various aldehydes are identified and quantified by MS detection. The results exhibit good agreement to quantification data obtained with UV detection.     

Ultrapure water for liquid chromatography-mass spectrometry studies

Improvements in trace enrichment techniques combined with the sensitivity of mass spectrometry offer enhanced opportunities to analyze ever lower concentrations of drugs, metabolites, pesticides or environmental pollutants. To perform HPLC and liquid chromatography-mass spectrometry (LC-MS) analyses under optimum conditions, the water used for mobile phase preparation needs to be highly purified and delivered on demand. Indeed, both UV photodiode array detection and MS detection methods are sensitive to organic contaminants (total organic carbon, TOC), and the water quality has a direct impact on the achievable detection limits. The benefits of UV photooxidation on TOC reduction for LC-MS studies were highlighted using electrospray ionization MS detection by comparing HPLC-grade bottled water, freshly produced UV185/254-treated water, and freshly produced non-UV-treated water.     

Radiochemical detection for packed capillary liquid chromatography-mass spectrometry

For the identification of trace level organic molecules, such as drug or pesticide metabolites, there is need of a practical method to do packed capillary liquid chromatography-mass spectrometry (LC-MS) with radiochemical detection. This problem has been successfully solved by use of a post column flow-splitter, with coaxially transported makeup flow that increases the split flow rate to a flow compatible with commercially available radiochemical flow cells. To test the device, 14C-labeled azoxystrobin, a commercial fungicide, was analyzed by liquid chromatography-radiochemical activity monitor-mass spectrometry (LC-RAM-MS) using a 0.32 mm i.d. packed capillary column. Azoxystrobin could be detected at 500 pCi with good signal/noise. The method is general and can be used with capillary LC columns of smaller diameters. Column efficiency of about 20,000 theoretical plates/m was achieved using either radiochemical or mass spectrometric data, thus demonstrating the lack of band broadening using the described method for radiochemical detection. The simple hardware described allows the routine use of packed capillary LC with radiochemical detection.     

Two-pump at-column-dilution configuration for preparative liquid chromatography-mass spectrometry

Preparative liquid chromatography-mass spectrometry (LC-MS) is widely used in parallel synthesis schemes to expedite purification. Recently, an alternative sample loading scheme, at column dilution, has been shown to dramatically increase the mass loading capacity of LC-MS purification methods. The prototype system utilized separate sample loading and binary gradient pumps. We report here a configuration for effecting at-column dilution using only the two pumps that provide the binary gradient flow. The advantages of a two-pump configuration are reduced cost, reduced space requirements, simplified control, and reduced service and maintenance issues. The two-pump at-column-dilution configuration is demonstrated for large- and small-scale LC-MS purifications. Purification on scales appropriate for high-throughput parallel synthesis can be achieved with small-scale chromatography using at-column dilution; purification of 20 mg of material is demonstrated using a 4.6 mm x 150 mm column and a flow rate of 3 mL/m. Reducing the scale of chromatography required for LC-MS purification has significant benefits, including the following. It requires less expensive columns, consumes less solvent, generates smaller-volume fractions (shorter dry-down time and the ability to collect into small-volume collector formats, such as 96-well plates), and has the potential for faster separations.     

Sonic spray ionization interface for liquid chromatography-mass spectrometry

A sonic spray ionization (SSI) interface for liquid chromatography-mass spectrometry (LC-MS) analysis was optimized for analysis of 2-[(1R)-3-[bis(1-methylethyl)amino]-1-phenylpropyl]-4-methyl-phenol (tolterodine), used as a model drug substance, and the influence of different parameter settings was evaluated using factorial design. A comparison between SSI and electrospray ionization (ESI) was made for tolterodine, tolterodine metabolites, and a set of steroids.SSI was found to give slightly poorer repeatability and broader peaks for tolterodine compared to ESI. However, there was no significant difference in chromatographic peak shape, and the repeatability using SSI was similar to that obtained using ESI if a ratio (area of tolterodine/area of metabolite) was used. In this study, the sensitivity was higher using SSI. For the analysis of pregnanolone, less water loss was obtained using SSI, probably due to less energy being transferred to the analyte upon ionization.     

气相色谱-质谱和液相色谱-质谱联用方法用于口腔癌代谢组学分析

口腔癌的发病率占全身恶性肿瘤的第6位,正确区分正常状态与良性和恶性口腔肿瘤,是恰当选择治疗方案的关键所在。本研究中,首先利用液相色谱-质谱和气相色谱-质谱联用方法分别得到健康人、良性口腔肿瘤患者和恶性口腔肿瘤患者血浆、尿液和唾液的代谢轮廓,然后应用正交信号校正的偏最小二乘法进行多变量统计分析。结果表明健康人、良性肿瘤患者和恶性肿瘤患者在血浆、尿液和唾液等3种体液代谢中都可以被区分开,而且找到和鉴定出19个重要差异代谢物。相关代谢通路分析显示,与健康人相比,良性和恶性口腔肿瘤患者都存在能量代谢紊乱和脂类代谢失衡的现象,但恶性口腔肿瘤患者还表现出三羧酸循环和肌醇代谢异常,这为临床诊断及治疗提供了重要信息。     

State-of-the-art in liquid chromatography-mass spectrometry.

Impressive progress has been made in the technology and application of combined liquid chromatography-mass spectrometry (LC-MS) in the past decennium. From a technique, that could only be used by a specialist, it has developed into a routinely applicable technique. LC-MS has become the method-of-choice of analytical support in many stages of drug development within pharmaceutical industries and has found its way into environmental, biochemical and other laboratories. This paper provides a perspective on the current technology, principles and applications of LC-MS.     

Metabolite identification by liquid chromatography-mass spectrometry

Metabolite identification (Met ID) is important during the early stages of drug discovery and development, as the metabolic products may be pharmacologically active or toxic in nature. Liquid chromatography-mass spectrometry (LC-MS) has a towering role in metabolism research.This review discusses current approaches and recent advances in using LC-MS for Met ID. We critically assess and compare various mass spectrometers, highlighting their strengths and limitations. Citing appropriate examples, we cover recent LC and ion sources, isotopic-pattern matching, hydrogen/deuterium-exchange MS, data dependent analyses, MS^E, mass defect filter, 2D and 3D approaches for the elucidation of molecular formula, polarity switching, and background-subtraction and noise-reduction algorithms. A flow chart outlines a comprehensive strategy for Met ID, including a focus on reactive metabolites.     

Thermospray liquid chromatography-mass spectrometry of corticosteroids.

A high-performance liquid chromatographic method was developed for thermospray mass spectrometric analysis of steroidal hormones. Using a Nova-Pak C18 reversed-phase column and isocratic elution with a solvent comprised of 25 mM ammonium formate in 30% acetonitrile, corticosteroids were separated within 10 min. This solvent also permitted ultraviolet absorbance detection down to 220 nm with low-nanogram sensitivity. The use of acetonitrile was favourable for thermospray mass spectrometric analysis because mass spectra were obtained with a pseudomolecular ion as the base peak. A combination of liquid chromatography, ultraviolet absorbance detection and thermospray mass spectrometry provided a sensitive and reliable method for unequivocal confirmation of the presence of steroidal drugs in equine urine.     

Biomedical applications of thermospray liquid chromatography-mass spectrometry

Thermospray liquid chromatography-mass spectrometry has been applied in the solution of a number of problems of biological and biomedical interest. These include the analysis of phenazines from the Gram negative bacterium Pseudomonas aeruginosa, steroids released by rat adrenals and eicosanoids generated by human inflammatory cells. The application of the technique to leukotrienes in blood is discussed. Isotopic labelling prior to analysis, to facilitate identification and structure elucidation is outlined with reference to the steroids.     

A mussel tissue certified reference material for multiple phycotoxins. Part 2: liquid chromatography-mass spectrometry, sample extraction and quantitation procedures

A freeze-dried mussel tissue certified reference material (CRM-FDMT1) containing multiple groups of shellfish toxins has been prepared. Toxin groups present in the material include okadaic acid and the dinophysistoxins, azaspiracids, yessotoxins, pectenotoxins, spirolides and domoic acid. In this work, analytical methods have been examined for the characterisation of the candidate CRM. A comprehensive extraction procedure was developed, which gave good recovery (>98%) for all lipophilic toxins studied. A fast liquid chromatography–mass spectrometry (LC-MS) method was developed that separates the major toxins according to the MS ionisation mode of optimum sensitivity. Matrix effects associated with analysis of these extracts using the developed LC-MS method were assessed. Standard addition and matrix-matched calibration procedures were evaluated to compensate for matrix effects. The methods and approaches will be used for the precise characterisation of the homogeneity and stability of the various toxins in CRM-FDMT1 and for the accurate assignment of certified values. The developed methods also have excellent potential for application in routine regulatory monitoring of shellfish toxins.     

Confirmatory and quantitative analysis using experimental design for the extraction and liquid chromatography-UV, liquid chromatography-mass spectrometry and liquid chromatography-mass spectrometry/mass spectrometry determination of quinolones in turkey muscle

The aim of this work is to established methods for determination of quinolones (ciprofloxacin, danofloxacin, enrofloxacin, difloxacin and flumequine), regulated by European Union, and sarafloxacin in turkey muscle. An experimental design has been applied for the optimization of the factors that influence the extraction of quinolones from turkey muscle in order to determine the experimental conditions for their extraction with high recoveries. Liquid chromatography with ultraviolet detection (LC-UV), liquid chromatography-mass spectrometry (LC-MS) and liquid chromatography tandem mass spectrometry (LC-MS/MS) have been used for the simultaneous quantification of quinolones antibiotics in turkey muscle. The proposed methods have been validated according to the Food Drugs Administration guideline and presents the limit of quantification below the maximum residue limits established by the European Union for quinolones in turkey muscle. The methods developed have been applied to quantification of enrofloxacin and its main metabolite ciprofloxacin in samples of turkey muscle obtained from animals treated with enrofloxacin.     

A high-performance liquid chromatography-tandem mass spectrometry method for quantitation of nitrogen-containing intracellular metabolites

A comprehensive method of quantifying intracellular metabolite concentrations would be a valuable addition to the arsenal of tools for holistic biochemical studies. Here, we describe a step toward the development of such method: a quantitative assay for 90 nitrogen-containing cellular metabolites. The assay involves reverse-phase high-performance liquid chromatography separation followed by electrospray ionization and detection of the resulting ions using triple-quadrupole mass spectrometry in selected reaction monitoring mode. For 79 of the 90 metabolites, the assay is linear with a limit of detection of 10 ng/mL or less. Using this method, 36 metabolites can be reliably detected in extracts of the bacterium Salmonella enterica, with the identity of each metabolite confirmed by the presence, on growing of the bacteria in (13)C-glucose, of a peak corresponding to the isotope-labeled form of the compound. Quantitation in biological samples is performed by mixing unlabeled test cell extract with (13)C-labeled standard extract, and determining the (12)C/(13)C-ratio for each metabolite. Using this approach, the metabolomes of growing (exponential phase) and carbon-starved (stationary phase) bacteria were compared, revealing 16 metabolites that are significantly down-regulated and five metabolites that are significantly up-regulated, in stationary phase.     

Determination of ink photoinitiators in packaged beverages by gas chromatography-mass spectrometry and liquid chromatography-mass spectrometry

A new analytical method, using gas chromatography-mass spectrometry (GC/MS) and liquid chromatography-mass spectrometry (LC/MS) techniques, was developed for the determination in packaged food beverages of five ink photoinitiator residues: 2-isopropylthioxanthone (ITX), benzophenone, 2-ethylhexyl-4-dimethylaminobenzoate (EHDAB), 1-hydroxycyclohexyl-1-phenyl ketone (IRGACURE 184) and ethyl-4-dimethylaminobenzoate (EDAB). Samples were extracted from selected beverages (milk, fruit juices and wine) and relative packagings, using n-hexane and dichloromethane, respectively, purified on solid-phase extraction (SPE) silica gel cartridges, and then analyzed in GC/MS and LC/MS. The recovery percentages, obtained spiking the beverage samples at concentrations of 4 and 10 microgl(-1) with a standard mixture of photoinitiators, were in the range 42-108% (milk), 50-84% (wine), and 48-109% (fruit juices). The repeatability of the method was assessed in all cases by the % of correlation value, that was lower than 19%. The lowest limits of detection (LODs) and limits of quantification (LOQs), obtained using GC/MS, were in the range 0.2-1 and 1-5 microgl(-1), respectively. The method was applied to the analysis of forty packaged food beverages (milk, fruit juices and wine samples). The most significant contamination was that of benzophenone, found in all samples in a concentration range of 5-217mugl(-1). Its presence was confirmed by an LC/Atmospheric-Pressure PhotoIonization (APPI)/MS/MS analysis. The photoinitiator (EHDAB) was found in eleven out of forty beverages in a concentration range of 0.13-0.8 microgl(-1). Less important was the ITX contamination, found in three out of forty samples in a range 0.2-0.24 microgl(-1). The work proposes a new method to analyze ink photoinitiator residues in polycoupled carton packaging and in contained food beverages.     

Comparative studies of the leachate of an industrial landfill by gas chromatography-mass spectrometry, liquid chromatography-nuclear magnetic resonance and liquid chromatography-mass spectrometry

Nowadays, the need to have a realistic characterization of industrial effluents in the environment has become more and more recognized. A palette of different analytical methods both for sample extraction and instrumental analysis are available today, some older, others introduced more recently. The aim of this research is to compare a number of these techniques. To do this we studied a real leachate from an industrial landfill and carried out chemical analyses for organic pollutants, using different extraction methods based on solid-phase extraction and solid-phase microextraction and different instrumental techniques such as GC-MS, LC-MS, NMR and LC-NMR. Results show the performances of the different techniques, which are complementary.