Electric‐Field Assisted In Situ Hydrolysis of Bulk Metal–Organic Frameworks (MOFs) into Ultrathin Metal Oxyhydroxide Nanosheets for Efficient Oxygen Evolution

Facile preparation of low‐cost electrocatalysts for efficient oxygen evolution reaction (OER) remains a big challenge. Herein, a novel strategy for ultrafast (20 s) transformation of bulk metal–organic frameworks (MOFs) into ultrathin metal oxyhydroxide nanosheets for efficient OER has been developed. For two isomeric MOFs ( FJI‐H25Fe and FJI‐H25FeCo ), only the metastable FJI‐H25FeCo bulk can immediately transform into FeCo‐oxyhydroxides nanosheets through electric‐field assisted hydrolysis. The potential evolution process from MOF bulk to FeCo‐oxyhydroxides nanosheets has been investigated in detail. The as‐made nanosheets exhibit excellent OER performances, showing an extremely low overpotential of 231 mV at the current density of 10 mA cm^?2, a relatively small Tafel slope of 42 mV dec^?1, and long‐term durability of at least 30 h. This work not only provides a novel strategy for facile preparation of low‐cost and efficient OER electrocatalysts, but also represents a new way for preparation of metal oxyhydroxides nanosheets with good crystallinity and morphology, and a fresh method for mild synthesis of nanosized derivatives from MOF materials.     

Two‐Dimensional Co@N‐Carbon Nanocomposites Facilely Derived from Metal–Organic Framework Nanosheets for Efficient Bifunctional Electrocatalysis

Metal–organic frameworks (MOFs) and MOF‐derived nanomaterials have recently attracted great interest as highly efficient, non‐noble‐metal catalysts. In particular, two‐dimensional MOF nanosheet materials possess the advantages of both 2D layered nanomaterials and MOFs and are considered to be promising nanomaterials. Herein, we report a facile and scalable in situ hydrothermal synthesis of Co–hypoxanthine (HPA) MOF nanosheets, which were then directly carbonized to prepare uniform Co@N‐Carbon nanosheets for efficient bifunctional electrocatalytic hydrogen‐evolution reactions (HERs) and oxygen‐evolution reactions (OERs). The Co embedded in N‐doped carbon shows excellent and stable catalytic performance for bifunctional electrocatalytic OERs and HERs. For OERs, the overpotential of Co@N‐Carbon at 10 mA cm^?2 was 400 mV (vs. reversible hydrogen electrode, RHE). The current density of Co@N‐Carbon reached 100 mA cm^?2 at an overpotential of 560 mV, which showed much better performance than RuO₂; the largest current density of RuO₂ that could be reached was only 44 mA cm^?2. The Tafel slope of Co@N‐Carbon was 61 mV dec^?1, which is comparable to that of commercial RuO₂ (58 mV dec^?1). The excellent electrocatalytic properties can be attributed to the nanosheet structure and well‐dispersed carbon‐encapsulated Co, CoN nanoparticles, and N‐dopant sites, which provided high conductivity and a large number of accessible active sites. The results highlight the great potential of utilizing MOF nanosheet materials as promising templates for the preparation of 2D Co@N‐Carbon materials for electrocatalysis and will pave the way to the development of more efficient 2D nanomaterials for various catalytic applications.     

Fabrication of Crystalline Microporous Membrane from 2D MOF Nanosheets for Gas Separation

Metal‐organic frameworks (MOFs)‐based membranes have shown great potentials as applications in gas separation. In this work, a uniform membrane based on 2D MOF Ni₃(HITP)₂ (HITP=2,3,6,7,10,11‐hexaaminotriphenylene) was fabricated on ordered macroporous AAO via the filtration method. To fabricate the membrane, we obtained the Ni₃(HITP)₂ nanosheets as building blocks via a soft‐physical exfoliation method successfully that were confirmed by AFM and TEM. We also studied the H₂, CO₂ and N₂ adsorption isotherms of Ni₃(HITP)₂ powder at room temperature, which shows Ni₃(HITP)₂ has high heats of adsorption for CO₂ and high selectivity of CO₂ over N₂. Gas permeation tests indicate that the Ni₃(HITP)₂ membrane shows high permeance and selectivity of CO₂ over N₂, as well as good selectivity of H₂ over N₂. The ideal separation factors of CO₂/N₂ and H₂/N₂ from sing‐gas permeances are 13.6 and 7.8 respectively, with CO₂ permeance of 3.15×10^?6 mol?m^?2?s^?1?Pa^?1. The membrane also showed good stability, durability and reproducibility, which are of potential interest for practical applications in the CO₂ separations.     

Water‐stable Adenine‐based MOFs with Polar Pores for Selective CO2 Capture

Here, we report two novel water‐stable amine‐functionalized MOFs, namely IISERP‐MOF26 ([NH₂(CH₃)₂][Cu₂O(Ad)(BDC)]?(H₂O)₂(DMA), 1 ) and IISERP‐MOF27 ([NH₂(CH₃)₂]_1/2[Zn₄O(Ad)₃(BDC)₂]?(H₂O)₂(DMF)_1/2, 2 ), which show selective CO₂ capture capabilities. They are made by combining inexpensive and readily available terephthalic acid and N‐rich adenine with Cu and Zn, respectively. They possess 1D channels decorated by the free amine group from the adenine and the polarizing oxygen atoms from the terephthalate units. Even more, there are dimethyl ammonium (DMA⁺) cations in the pore rendering an electrostatic environment within the channels. The activated Cu‐ and Zn‐MOFs physisorb about 2.7 and 2.2 mmol g^?1 of CO₂, respectively, with high CO₂/N₂ and moderate CO₂/CH₄ selectivity. The calculated heat of adsorption (HOA=21–23 kJ mol^?1) for the CO₂ in both MOFs suggest optimal physical interactions which corroborate well with their facile on‐off cycling of CO₂. Notably, both MOFs retain their crystallinity and porosity even after soaking in water for 24 hours as well as upon exposure to steam over 24 hours. The exceptional thermal and chemical stability, favorable CO₂ uptakes and selectivity and low HOA make these MOFs promising sorbents for selective CO₂ capture applications. However, the MOF′s low heat of adsorption despite having a highly CO₂‐loving groups lined walls is quite intriguing.     

Metal-organic framework membranes: From synthesis to electrocatalytic applications

Metal-organic frameworks (MOFs), as an emerging family of porous inorganic-organic crystal materials, exhibit widely applications in gas storage and separation, drug release, sensing, and catalysis, owing to easily adjustable pore sizes, uniformly distributed metal centers, high surface areas, and tunable functionalities. However, MOF crystal powders are usually difficult to be directly applied into specific devices because of their brittleness, insolubility and low compatibility. Therefore, to expand versatile MOF membranes with robustness and operational flexibility is urgent to satisfy practical applications. Although numerous reports have reviewed the synthesis and applications of MOF membranes, relatively few reports the electrocatalytic properties based on MOF membranes. Herein, this mini-review provides an overview of preparation of MOF membranes, including directed synthesis, secondary growth and electrochemical deposition method. Meanwhile, fabrication of ultrathin 2D MOF nanosheets those can be also defined as a kind of nanoscale MOF membranes is also mentioned. Electrocatalytic performance of oxygen reduction reaction (ORR), oxygen evolution reaction (OER), hydrogen evolution reaction (HER) and CO₂ reduction reaction (CO₂RR) for diverse MOF membranes/nanosheets and their derivatives are introduced.     

Combination of Optimization and Metalated‐Ligand Exchange: An Effective Approach to Functionalize UiO‐66(Zr) MOFs for CO2 Separation

The strategy to functionalize water‐stable metal–organic frameworks (MOFs) in order to improve their CO₂ uptake capacities for efficient CO₂ separation remains limited and challenging. We herein present an effective approach to functionalize a prominent water‐stable MOF, UiO‐66(Zr), by a combination of optimization and metalated‐ligand exchange. In particular, by systematic optimization, we have successfully obtained UiO‐66(Zr) of the highest BET surface area reported so far (1730 m² g^?1). Moreover, it shows a hybrid Type I/IV N₂ isotherm at 77 K and a mesopore size of 3.9 nm for the first time. The UiO‐66 MOF underwent a metalated‐ligand‐exchange (MLE) process to yield a series of new UiO‐66‐type MOFs, among which UiO‐66‐(COONa)₂‐EX and UiO‐66‐(COOLi)₄‐EX MOFs have both enhanced CO₂ working capacity and IAST CO₂/N₂ selectivity. Our approach has thus suggested an alternative design to achieve water‐stable MOFs with high crystallinity and gas uptake for efficient CO₂ separation.     

Electric-Field Assisted In Situ Hydrolysis of Bulk Metal–Organic Frameworks (MOFs) into Ultrathin Metal Oxyhydroxide Nanosheets for Efficient Oxygen Evolution

Facile preparation of low-cost electrocatalysts for efficient oxygen evolution reaction (OER) remains a big challenge. Herein, a novel strategy for ultrafast (20 s) transformation of bulk metal–organic frameworks (MOFs) into ultrathin metal oxyhydroxide nanosheets for efficient OER has been developed. For two isomeric MOFs ( FJI-H25Fe and FJI-H25FeCo ), only the metastable FJI-H25FeCo bulk can immediately transform into FeCo-oxyhydroxides nanosheets through electric-field assisted hydrolysis. The potential evolution process from MOF bulk to FeCo-oxyhydroxides nanosheets has been investigated in detail. The as-made nanosheets exhibit excellent OER performances, showing an extremely low overpotential of 231 mV at the current density of 10 mA cm⁻², a relatively small Tafel slope of 42 mV dec⁻¹, and long-term durability of at least 30 h. This work not only provides a novel strategy for facile preparation of low-cost and efficient OER electrocatalysts, but also represents a new way for preparation of metal oxyhydroxides nanosheets with good crystallinity and morphology, and a fresh method for mild synthesis of nanosized derivatives from MOF materials.     

pH‐Dependent Proton Conducting Behavior in a Metal–Organic Framework Material

A porous metal–organic framework (MOF), [Ni₂(dobdc)(H₂O)₂]?6 H₂O (Ni₂(dobdc) or Ni‐MOF‐74; dobdc^4?=2,5‐dioxido‐1,4‐benzenedicarboxylate) with hexagonal channels was synthesized using a microwave‐assisted solvothermal reaction. Soaking Ni₂(dobdc) in sulfuric acid solutions at different pH values afforded new proton‐conducting frameworks, H⁺@Ni₂(dobdc). At pH 1.8, the acidified MOF shows proton conductivity of 2.2×10^?2 S cm^?1 at 80 °C and 95 % relative humidity (RH), approaching the highest values reported for MOFs. Proton conduction occurs via the Grotthuss mechanism with a significantly low activation energy as compared to other proton‐conducting MOFs. Protonated water clusters within the pores of H⁺@Ni₂(dobdc) play an important role in the conduction process.     

Ultrathin Metal–Organic Framework Nanosheets with Ultrahigh Loading of Single Pt Atoms for Efficient Visible‐Light‐Driven Photocatalytic H2 Evolution

A surfactant‐stabilized coordination strategy is used to make two‐dimensional (2D) single‐atom catalysts (SACs) with an ultrahigh Pt loading of 12.0 wt %, by assembly of pre‐formed single Pt atom coordinated porphyrin precursors into free‐standing metal–organic framework (MOF) nanosheets with an ultrathin thickness of 2.4±0.9 nm. This is the first example of 2D MOF‐based SACs. Remarkably, the 2D SACs exhibit a record‐high photocatalytic H₂ evolution rate of 11 320 μmol g^?1 h^?1 via water splitting under visible light irradiation (λ>420 nm) compared with those of reported MOF‐based photocatalysts. Moreover, the MOF nanosheets can be readily drop‐casted onto solid substrates, forming thin films while still retaining their photocatalytic activity, which is highly desirable for practical solar H₂ production.     

Single-Layer 2D Ni−BDC MOF Obtained in Supercritical CO2-Assisted Aqueous Solution

The development of an efficient strategy for fabricating two-dimensional metal-organic framework (MOF) nanosheets with high yield and high stability is desirable. Herein, we demonstrate for the first time that large, single-layer 2D nickel-benzene dicarboxylate (Ni−BDC) MOF nanosheets can be fabricated with the assistance of supercritical (SC) CO₂ in a pure aqueous system. Detailed experimental evidence reveals that the SC CO₂ molecule can exchange with the lattice-coordinated H₂O molecules, side-on coordinate with the metal Ni¹ sites on the Ni−BDC surface, and finally break the interlayer hydrogen bond to exfoliate the bulk Ni−BDC into a 2D MOF. More importantly, a thin SC CO₂ layer building up at the water−Ni−BDC interfaces can transform the pristine hydrophilic interface into a super-hydrophobic one. This super-hydrophobic layer at the water-MOF interface can effectively prevent dissociation, thus promoting the stability of Ni−BDC in aqueous system.     

Synthesis of Two‐dimensional Microporous Carbonaceous Polymer Nanosheets and Their Application as High‐performance CO2 Capture Sorbent

The synthesis of two‐dimensional (2D) polymer nanosheets with a well‐defined microporous structure remains challenging in materials science. Here, a new kind of 2D microporous carbonaceous polymer nanosheets was synthesized through polymerization of a very low concentration of 1,4‐dicyanobenzene in molten zinc chloride at 400–500 °C. This type of nanosheets has a thickness in the range of 3–20 nm, well‐defined microporosity, a high surface area (～537 m² g^?1), and a large micropore volume (～0.45 cm³ g^?1). The microporous carbonaceous polymer nanosheets exhibit superior CO₂ sorption capability (8.14 wt % at 298 K and 1 bar) and a relatively high CO₂ selectivity toward N₂ (25.6). Starting from different aromatic nitrile monomers, a variety of 2D carbonaceous polymer nanosheets can be obtained showing a certain universality of the ionothermal method reported herein.     

Post-modification of metal-organic framework for improved CO2 photoreduction efficiency

Utilizing metal-organic frameworks (MOFs) to design photocatalysts for CO₂ reduction catalysts is an excellent idea but currently restricted by the relatively low activity. Enhancing CO₂ affinity and tuning the oxidation state of metal clusters in MOFs might be a solution to improve the catalytic performance. Herein, the Cl-bridge atoms in the metal clusters of a cobalt MOF were easily exchanged with OH^?, which simultaneously oxidized a portion of Co(II) to Co(III) and resulted in a much enhanced photocatalytic activity for CO₂ reduction. In contrast, the original framework does not exhibit such superior activity. Comprehensive characterizations on their physicochemical properties revealed that the introduction of hydroxyl group not only greatly increases the CO₂ affinity but also alters the oxidation state of metal clusters, resulting in significantly improved photocatalytic activities for CO₂ reduction. This work provides important insight into the design of efficient photocatalysts.     

Two-dimensional nanosheets of metal–organic frameworks with tailorable morphologies

The controlled preparation of two-dimensional (2D) nanosheets of metal–organic frameworks (MOFs), with tailorable methodologies, properties, and applications, is of significant importance. Here, in this work, by subtle control of the ultrasonic duration and solvent polarity, the iron(II)-based 2D MOF Fe(pyz)₂Cl₂ (pyz = pyrazine) has been elegantly tailored into 2D nanosheets (lateral size ≥500 nm in aqueous, with ultrasonic duration of 30 min) and one-dimensional (1D) nanoribbons (lateral size ≤100 nm in ethanol solution, with ultrasonic duration of 90 min). The aqueous suspension of 2D nanosheets was featured with thermal-induced spin-state transition at around room temperature and can be used as effective Fenton catalysts for degradation of water-soluble organic dyes, whereas the ethanol suspension of 1D nanoribbons can act as a versatile nanoplatform for trans-to-cis isomerization of 4, 4′-azopyridine. These results may provide a novel strategy for the controlled preparation of layered nanomaterials.     

Engineered Bifunctional Luminescent Pillared-Layer Frameworks for Adsorption of CO2 and Sensitive Detection of Nitrobenzene in Aqueous Media

Through a dual-ligand synthetic approach, five isoreticular primitive cubic (pcu)-type pillared-layer metal–organic frameworks (MOFs), [Zn₂(dicarboxylate)₂(NI-bpy-44)] ⋅ x DMF ⋅ y H₂O, in which dicarboxylate=1,4-bdc ( 1 ), Br-1,4-bdc ( 2 ), NH₂-1,4-bdc ( 3 ), 2,6-ndc ( 4 ), and bpdc ( 5 ), have been engineered. MOFs 1 – 5 feature twofold degrees of interpenetration and have open pores of 27.0, 33.6, 36.8, 52.5, and 62.1 %, respectively. Nitrogen adsorption isotherms of activated MOFs 1′ – 5′ at 77 K all displayed type I adsorption behavior, suggesting their microporous nature. Although 1′ and 3′ – 5′ exhibited type I adsorption isotherms of CO₂ at 195 K, MOF 2′ showed a two-step gate-opening sorption isotherm of CO₂. Furthermore, MOF 3′ also had a significant influence of amine functions on CO₂ uptake at high temperature due to the CO₂–framework interactions. MOFs 1 – 5 revealed solvent-dependent fluorescence properties; their strong blue-light emissions in aqueous suspensions were efficiently quenched by trace amounts of nitrobenzene (NB), with limits of detection of 4.54, 5.73, 1.88, 2.30, and 2.26 μm , respectively, and Stern–Volmer quenching constants (K_sv) of 2.93×10³, 1.79×10³, 3.78×10³, 4.04×10³, and 3.21×10³ m ⁻¹, respectively. Of particular note, the NB-included framework, NB@ 3 , provided direct evidence of the binding sites, which showed strong host–guest π–π and hydrogen-bonding interactions beneficial for donor–acceptor electron transfer and resulting in fluorescence quenching.     

Photochemical In Situ Exfoliation of Metal–Organic Frameworks for Enhanced Visible-Light-Driven CO2 Reduction

Two novel two-dimensional metal–organic frameworks (2D MOFs), 2D-M₂TCPE (M=Co or Ni, TCPE=1,1,2,2-tetra(4-carboxylphenyl)ethylene), which are composed of staggered (4,4)-grid layers based on paddlewheel-shaped dimers, serve as heterogeneous photocatalysts for efficient reduction of CO₂ to CO. During the visible-light-driven catalysis, these structures undergo in situ exfoliation to form nanosheets, which exhibit excellent stability and improved catalytic activity. The exfoliated 2D-M₂TCPE nanosheets display a high CO evolution rate of 4174 μmol g⁻¹ h⁻¹ and high selectivity of 97.3 % for M=Co and Ni, and thus are superior to most reported MOFs. The performance differences and photocatalytic mechanisms have been studied with theoretical calculations and photoelectric experiments. This study provides new insight for the controllable synthesis of effective crystalline photocatalysts based on structural and morphological coregulation.     

Microporous La–Metal–Organic Framework (MOF) with Large Surface Area

A microporous La–metal‐organic framework (MOF) has been synthesized by the reaction of La(NO₃)₃ ? 6 H₂O with a ligand 4,4′,4′′‐s‐triazine‐1,3,5‐triyltri‐p‐aminobenzoate (TATAB) featuring three carboxylate groups. Crystal structure analysis confirms the formation of 3D MOF with hexagonal micropores, a Brunauer–Emmett—Teller (BET) surface area of 1074 m² g^?1 and high thermal and chemical stability. The CO₂ adsorption capacities are 76.8 cm³ g^?1 at 273 K and 34.6 cm³ g^?1 at 293 K, a highest measured CO₂ uptake for a Ln–MOFs.     

Cu3(hexaiminotriphenylene)2: An Electrically Conductive 2D Metal–Organic Framework for Chemiresistive Sensing

The utility of metal–organic frameworks (MOFs) as functional materials in electronic devices has been limited to date by a lack of MOFs that display high electrical conductivity. Here, we report the synthesis of a new electrically conductive 2D MOF, Cu₃(HITP)₂ (HITP=2,3,6,7,10,11‐hexaiminotriphenylene), which displays a bulk conductivity of 0.2 S cm^?1 (pellet, two‐point‐probe). Devices synthesized by simple drop casting of Cu₃(HITP)₂ dispersions function as reversible chemiresistive sensors, capable of detecting sub‐ppm levels of ammonia vapor. Comparison with the isostructural 2D MOF Ni₃(HITP)₂ shows that the copper sites are critical for ammonia sensing, indicating that rational design/synthesis can be used to tune the functional properties of conductive MOFs.     

Thermoplastic Membranes Incorporating Semiconductive Metal–Organic Frameworks: An Advance on Flexible X‐ray Detectors

Semiconductive metal–organic frameworks (MOFs) have emerged in applications such as chemical sensors, electrocatalysts, energy storage materials, and electronic devices. However, examples of semiconductive MOFs within flexible electronics have not been reported. We present flexible X‐ray detectors prepared by thermoplastic dispersal of a semiconductive MOF ( SCU‐13 ) through a commercially available polymer, poly(vinylidene fluoride). The flexible detectors exhibit efficient X‐ray‐to‐electric current conversion with enhanced charge‐carrier mobility and low trap density compared to pelleted devices. A high X‐ray detection sensitivity of 65.86 μCGy_air^?1 cm^?2 was achieved, which outperforms other pelleted devices and commercial flexible X‐ray detectors. We demonstrate that the MOF‐based flexible detectors can be operated at multiple bending angles without a deterioration in detection performance. As a proof‐of‐concept, an X‐ray phase contrast under bending conditions was constructed using a 5×5 pixelated MOF‐based imager.     

Sequential Transformation of Zirconium(IV)‐MOFs into Heterobimetallic MOFs Bearing Magnetic Anisotropic Cobalt(II) Centers

Heterometallic metal–organic frameworks (MOFs) allow the precise placement of various metals at atomic precision within a porous framework. This new level of control by MOFs promises fascinating advances in basic science and application. However, the rational design and synthesis of heterometallic MOFs remains a challenge due to the complexity of the heterometallic systems. Herein, we show that bimetallic MOFs with MX₂(INA)₄ moieties (INA=isonicotinate; M=Co²⁺ or Fe²⁺; X=OH^?, Cl^?, Br^?, I^?, NCS^?, or NCSe^?) can be generated by the sequential modification of a Zr‐based MOF. This multi‐step modification not only replaced the linear organic linker with a square planar MX₂(INA)₄ unit, but also altered the symmetry, unit cell, and topology of the parent structure. Single‐crystal to single‐crystal transformation is realized so that snapshots for transition process were captured by successive single‐crystal X‐ray diffraction. Furthermore, the installation of Co(NCS)₂(INA)₄ endows field‐induced slow magnetic relaxation property to the diamagnetic Zr‐MOF.     

Controllable Synthesis of Porphyrin‐Based 2D Lanthanide Metal–Organic Frameworks with Thickness‐ and Metal‐Node‐Dependent Photocatalytic Performance

Synthesizing 2D metal–organic frameworks (2D MOFs) in high yields and rational tailoring of the properties in a predictable manner for specific applications is extremely challenging. Now, a series of porphyrin‐based 2D lanthanide MOFs (Ln‐TCPP, Ln=Ce, Sm, Eu, Tb, Yb, TCPP=tetrakis(4‐carboxyphenyl) porphyrin) with different thickness were successfully prepared in a household microwave oven. The as‐prepared 2D Ln‐TCPP nanosheets showed thickness‐dependent photocatalytic performances towards photooxidation of 1,5‐dihydroxynaphthalene (1,5‐DHN) to synthesize juglone. Particularly, the Yb‐TCPP displayed outstanding photodynamic activity to generate O₂^? and ¹O₂. This work not only provides fundamental insights into structure designing and property tailoring of 2D MOFs nanosheets, but also pave a new way to improve the photocatalytic performance.