Multi-millijoule, nonlinear preamplifier for high intensity femtosecond Yb:YAG chirped-pulse amplification lasers at 1030 nm

We report the highest energy broadband laser pulses at a center wavelength of 1030 nm based on optical parametric chirped-pulse amplification (OPCPA). We have demonstrated amplification of 1030 nm femtosecond laser pulses from a broadband Yb oscillator to over 6.5 mJ with a total gain of greater than 10⁷ achieved in a single pass through only 56 mm of gain material at a 10 Hz repetition rate. The amplified spectral bandwidth of 10.8 nm affords recompression to a 230 fs pulse duration following amplification. As an alternative to the regenerative amplifier (RA) this system is one of the more promising candidates for realizing compact, high intensity, direct diode-pumped, high repetition rate femtosecond Yb:YAG chirped-pulse amplification (CPA) in laser systems.     

Direct fabrication of periodic patterns with hierarchical sub-wavelength structures on poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate) thin films using femtosecond laser interference patterning

A simple optical interference method for the fabrication of simply periodic and periodic with a substructure on poly(3,4-ethylene dioxythiophene)-poly(styrene sulfonate) using femtosecond laser interference patterns is demonstrated. The femtosecond laser pulse was split by a diffractive beam splitter and overlapped with two lenses. Homogeneous periodic arrays could be fabricated even using a single laser pulse. In addition, multipulse irradiation resulted in reproducible sub-wavelength ripples oriented perpendicularly to the laser polarization with spatial period from 170 to 220 nm (around one-fourth of the laser wavelength). In addition, the observed size of the spatial period was not affected by the number of incident laser pulses or accumulated energy density. Using high energy pulses it was possible to completely remove the PEDOT:PSS layer without inducing damage to the underneath substrate.     

中红外可调谐大能量飞秒脉冲激光产生

可调谐中红外飞秒光纤激光器具有非常普遍的应用,从而引起了人们的广泛关注。目前,非线性光纤中的拉曼孤子自频移效应是实现大范围可调谐飞秒脉冲激光的理想方法之一。然而,非线性光纤中其他高阶非线性效应的产生通常会限制拉曼孤子脉冲的能量提升。本文提出了利用有源掺杂光纤作为非线性介质和增益介质实现可调谐大能量中红外飞秒激光脉冲的方法。在理论上研究了有源掺杂非线性光纤中高阶孤子劈裂和孤子自频移效应的产生,以及线性增益对波长移动拉曼孤子能量、脉宽、光谱的影响。结果表明,通过为波长红移的低能量拉曼孤子提供线性增益,孤子脉冲的能量得到了显著提升且保持了其单脉冲特性,脉冲宽度为45 fs,且孤子脉冲的波长可通过所提供的增益进行大范围调谐。因此,利用有源掺杂光纤作为非线性介质是实现大能量可调谐中红外飞秒脉冲激光的一种有效方法。     

Experimental generation of high-contrast Talbot images with an ultrashort laser pulse

A femtosecond Ti:sapphire laser oscillator emitting pulses with 800 nm central wavelength, 10.9 fs pulse width, and 75 MHz repetition rate, combined with a dispersion-compensated diffractive system, was used to implement a large-area, high-contrast, broadband optical interference technique based on the Talbot effect. Chromatic artifacts associated with the huge spectrum of the optical source (approximately 150 nm) are compensated for with an air-separated hybrid diffractive-refractive lens doublet. The spatial resolution of the chromatically compensated Talbot images under femtosecond illumination is nearly identical to that achieved under continuous wave monochromatic illumination. Furthermore, the temporal width of the signal at the Talbot planes is limited by the group-delay-dispersion coefficient which is shown to be small. High-contrast one-dimensional periodic structures of 96.1 μm spacing generated by Talbot diffractometry are experimentally demonstrated.     

利用棱镜减小自衍射信号光角色散的研究

自衍射效应在飞秒激光领域有非常重要的应用,如提高飞秒脉冲的时域对比度、作为自参考光谱干涉脉冲测量法的参考光、作为频率分辨光学开关法的信号光等.然而,具有较宽光谱带宽的飞秒激光在自衍射效应过程中产生的信号光存在明显的角色散,这给自衍射效应的应用带来不利影响.本文研究发现通过在自衍射效应的一个光路中加入等腰直角棱镜,当到棱镜的入射角为23fi时可以明显地减小飞秒激光脉冲自衍射信号的角色散.这就为以后将自衍射效应更好的应用到飞秒激光脉冲的研究提供了有用的参考.     

Maskless laser tailoring of conical pillar arrays for antireflective biomimetic surfaces

Herein, we report a facile approach for rapid and maskless production of subwavelength structured antireflective surfaces with high and broadband transmittance-direct laser interference ablation. The interfered laser beams were introduced into the surface of a bare optical substrate, where structured surfaces consisting of a micropillar array were produced by two-step laser irradiation in the time frame of seconds. A multiple exposure of the two-beam interference approach was proposed instead of multiple-beam interference to simply realize planar patterns of a high aspect ratio. Tall sinusoidal pillars were created and shaped by pulse shot number control. As an example of the application, zinc sulfide substrates were processed with the technology, from which high transmission at an infrared wavelength, over 92%, at normal incidence was experimentally achieved.     

To measure chirped ultrashort laser pulse by the Talbot effect of a grating

We study the Fresnel diffraction of a phase grating under the illumination of a chirped femtosecond laser pulse. Using spatial spectrum theory, first we extract the central wavelength signal from the diffraction wave of the chirped pulse through a diaphragm. Then the central wavelength waves are directed to interfere in remote regions by two reflectors. The interference stripes at different distance will be exactly the same in interference region. Since the intensity distribution of the stripes is related to the chirp parameter of the femtosecond pulse, through measuring the stripe intensity distribution, we can indirectly detect the chirp parameter of the femtosecond pulse.     

基于氧化镁晶体中级联四波混频过程的紫外飞秒光脉冲产生

紫外波段飞秒激光脉冲是研究超快化学和超快物理相关过程的重要工具,实现波长可调谐的宽带紫外飞秒光脉冲将有助于推动超快动力学及相关领域的研究.本文报道了以两束400 nm的飞秒光脉冲作为级联四波混频的抽运源,在氧化镁晶体中产生9阶频率上转换和5阶频率下转换边带信号的实验结果.边带波长范围从350 nm到450 nm连续可调谐,这些边带信号的发散角和波长与级联四波混频理论预测结果吻合.紫外边带相对于入射光的整体转化效率约为1.2%.同时,高阶边带的光谱形状呈现高斯型,其谱宽理论上支持傅里叶转换极限脉宽为20—50 fs.本文展示了一种高效产生波长可连续调谐的紫外飞秒光脉冲的便捷方法,为基于紫外超短脉冲的相关研究提供了有效工具.     

利用三色组合脉冲激光获得孤立阿秒脉冲发射

孤立阿秒脉冲因可以跟踪和控制原子及分子内电子的运动过程而备受关注.本文从理论上开展了氦原子在3束飞秒脉冲激光组合场辐照下产生的高次谐波和阿秒脉冲辐射的研究.组合激光场由16 fs/1600 nm,15 fs/1100 nm和5.3 fs/800 nm的钛宝石脉冲构成.与前两束脉冲合成的双色场产生谐波谱相比,附加钛宝石脉冲的三色场产生的高次谐波发射谱呈现出高转换效率及宽带超连续特性,超连续谱范围覆盖从230—690次谐波,傅里叶变换后实现了128 as高强度孤立短脉冲的产生.该结果归因于合成的三色场呈现出高功率及少周期的中红外飞秒脉冲激光特性,可以有效控制原子电离以及复合发生在中红外飞秒脉冲的一个有效光学周期内.     

Widely tunable sub-30-fs pulses from a compact erbium-doped fiber source

Coupling femtosecond light pulses from an all-fiber Er:laser system into a dispersion-shifted and highly non-linear fiber, we generate output spectra exhibiting two broadband and mutually coherent maxima. Depending on the chirp of the input pulse, the spectral separation is easily tunable over a wide range up to values exceeding 100 THz. In this way, the source provides access to an ultrabroadband wavelength interval from 1130 to 1950 nm. Because of soliton effects, the long-wave component exhibits a transform-limited pulse width of 40 fs directly after the nonlinear element. The high-frequency part propagating in the dispersive regime is recompressed to pulse durations as short as 24 fs with an optimized prism sequence.     

飞秒激光诱导水光学击穿阈值

为了研究飞秒激光诱导水光学击穿阈值随激光脉冲参数的变化关系,采用四阶RungeKutta方法对飞秒激光诱导水光学击穿的椭球体模型进行了不同脉宽(40～540fs)、波长(400～1200nm)和光斑尺寸(0～200μm)下的数值模拟。通过控制变量法得出阈值光强与这些激光脉冲参数的关系曲线图,据此定性分析了阈值光强与激光脉冲参数的变化特征趋势。应用光强与功率、能量、辐照曝光量和电场强度之间的关系,得到了它们随激光脉冲参数脉宽、波长和光斑尺寸的动态关系,这为进一步研究飞秒激光与水和含水介质的相互作用提供了理论依据。     

Real-time analysis of nonlinear transient response of weakly confined excitons

By means of the nonlocal transient-response theory, we elucidate the characteristics of the femtosecond transient response of thin films with a thickness beyond the long wavelength approximation (LWA) regime. In this regime, the contribution of higher excitonic states with a nondipole-type spatial structure becomes dominant and the interplay between the spatial structures of excitonic wavefunction and the radiation field plays an important role, causing an anomalous enhancement of nonlinear signal at specific size-energy resonant conditions. In addition, in the femtosecond pulse excitation, the interference of the signals from the multiple excitonic states, which are excited simultaneously by the incident pulse with a wide spectral width, can generate a greater diversity of optical response than expected by the steady-state analysis. This suggests the possibility that we can control the optical function of the nano-materials by the selective excitation of the aimed excitonic states using the laser pulse. This study serves as a theoretical basis for the nonlinear transient response by ultrashort pulse excitation of excitons confined in nano-structures.     

Generation of double pulses in-line by using reflective Dammann gratings

Doubled femtosecond laser pulses in-line are needed in the collinear pump-probe technique, collinear second harmonic generation frequency-resolved optical gating (SHG FROG) and the spectral phase interferometry for direct electric-field reconstruction (SPIDER), etc. Normally, it is generated by using a Michelson's structure. In this paper, we proposed a novel structure with two-layered reflective Dammann gratings and the reflective mirrors to generate doubled femtosecond laser pulses in line without transmission optical elements. Angular dispersion and spectral spatial walk-off are both compensated. In addition, this structure can also compress the positive chirped pulse, which cannot be realized with a Michelson's structure. By adopting triangular grating and blazed gratings, the efficiency of the system would in principle be increased as the Michelson's scheme. Experiments demonstrated that this method should be an alternative approach for generation of the double compressed pulses of femtosecond laser for practical applications.     

Design and fabrication of an optimum holographic optical element lens for a femtosecond laser pulse using a hologram computer-aided design tool

Design and fabrication of an optimum holographic optical element (HOE) lens for a femtosecond laser pulse using a hologram computer-aided design (CAD) tool is presented. The hologram CAD tool, which the authors have developed can design, analyze, and evaluate holograms fabricated by interferometrical technique. The function of the tool is extended to design and analyze a HOE lens illuminated with a femtosecond laser pulse. An optimum HOE lens for a laser pulse, which has 130 fs duration, 720 nm central wavelength, and 10 nm spectrum bandwidth, is designed by the tool. The optimum HOE lens gives both high diffraction efficiency and small amount of aberration. The designed HOE lens is fabricated and its optical characteristics have been experimentally evaluated. The reconstructed point images agree with the results of the numerical simulations by the tool. The tool demonstrates the capability of designing the optimum HOE lens for a femtosecond laser pulse.     

Broadband and high efficiency metal multi-layer dielectric grating based on non-quarter wave coatings as reflective mirror

This article deals with designing broadband and high efficiency metal multi-layer dielectric grating (MMDG) used to compress and stretch ultra-short laser pulse. The diffraction characteristics of MMDG are analysed with the method of rigorous coupled-wave method. The multi-layer dielectric used as reflective mirror is made up of non-quarter wave coatings. Taking the diffraction efficiency of the -1 order as the value of merit function, the parameters such as groove depth, residual thickness, duty cycle, and reflective mirror are optimized to obtain broadband and high diffraction efficiency. The optimized MMDG shows an ultra-broadband working spectrum with the average efficiency exceeding 97% over 160 nm wavelength centred at 1053 nm and TE polarization. The optimized MMDG should be useful for chirped pulse amplification.     

Fabrication of complex nanostructures on ZnO crystals by the interference of three femtosecond laser beams

By adjusting the laser polarization combinations, fluences and pulse numbers, we fabricated several types of two-dimensional (2D) complex nanostructures on the surface of c-cut ZnO single crystal by the interference of three femtosecond laser beams with central wavelength of 800 nm, pulse duration of 50 fs and pulse repetition frequency of 1 kHz. The hexagonal 2D nanostructures with a period of 600 nm are very regular and uniform, in which nanoparticles, nanorings and nanoripples with sizes of 200 nm are embedded. Excited by 800 nm femtosecond laser pulses, the photoluminescence (PL) micrographs reveal that the 2D nanostructures can emit purer and brighter blue light compared with the plane surface. These nanostructures have potential applications in blue light-emitting diodes (LEDs), high density optical storage and other optoelectronic devices.     

Isolated-attosecond-pulse generation by suppressing multiple rescatterings with plasmon-enhanced laser fields

An efficient scheme is proposed to generate broadband supercontinuum spectra and isolated attosecond laser pulses by suppressing multiple rescatterings with plasmon-enhanced laser fields. High-order harmonic generation from helium atoms in long wavelength is theoretically investigated. It is found that a quantum path interference and a multiple rescatterings interference are two fundamental limitations against the smooth degree of harmonic spectra. Numerical results show that the coherent superposition state in combination with plasmon-enhanced laser fields is robust for broadband supercontinuum generation. Then an isolated 78-as pulse can be directly generated.     

Picosecond ultrasonics time resolved spectroscopy using a photonic crystal fiber

We present a broadband picosecond ultrasonics time resolved spectroscopy. Detection of picosecond coherent acoustic phonons using a wavelength continuum generation in a photonic crystal fiber (PCF) with femtosecond laser pulses is developed. Measurements are performed for selected wavelengths of a broad wavelength probe pulse within a bandwidth of 250 nm with an 825 nm center wavelength on two samples made of tungsten and of gallium arsenide.     

Broadband and high efficiency metal multi-layer dielectric grating based on non-quarter-wave coatings as a reflective mirror

This article deals with designing a broadband and high efficiency metal multi-layer dielectric grating (MMDG) used to compress and stretch an ultrashort laser pulse. The diffraction characteristics of the MMDG are analysed by using the rigorous coupled-wave method. The multi-layer dielectric used as the reflective mirror is made up of non- quarter-wave coatings. Taking the diffraction efficiency of the 1 order as the value of merit function, the parameters such as groove depth, residual thickness, duty cycle, and reflective mirror are optimized to obtain broadband and high diffraction efficiency. The optimized MMDG shows an ultra-broadband working spectrum with the average efficiency exceeding 97% over 160 nm wavelength centred at 1053 nm and TE polarization. The optimized MMDG should be useful for chirped pulse amplification.     

Peculiarity of metal drilling with a commercial femtosecond laser

A commercial femtosecond pulse laser was used to study the interaction of ultrashort laser pulses with aluminum. Tests were conducted to measure the average drilling rate over a range of laser pulse energies in both air and vacuum at the wavelengths corresponding to the fundamental and second harmonic of the laser. For the fundamental wavelength, it was observed that the drilling rates in vacuum were significantly higher than that for drilling in atmospheric air. For the laser beam that was converted to second harmonic, the drilling rate in vacuum at the same energy was slightly lower than that for drilling in air. The observed results can be explained by the presence of an energetic nanosecond pedestal in the laser pulse produced by the femtosecond laser system. This nanosecond component provides a major contribution into drilling and it is strongly affected by the optical breakdown plasma that reduces the drilling rate in air. Conversion to second harmonic reduces the relative energy content of the nanosecond component resulting in a higher contrast femtosecond pulse that is not affected by the near surface plasma. The presence of air results in self-focusing of the second harmonic laser beam, causing an increased drilling rate as compared to the interaction in vacuum.