Improved visible light photocatalytic activity of sphere-like BiOBr hollow and porous structures synthesized via a reactable ionic liquid

BiOBr uniform flower-like hollow microsphere and porous nanosphere structures have been successfully synthesized through a one-pot EG-assisted solvothermal process in the presence of reactable ionic liquid 1-hexadecyl-3-methylimidazolium bromide ([C(16)mim]Br). The as-prepared samples were characterized by X-ray diffraction (XRD), X-ray photoelectron spectroscopy (XPS), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS) and diffuse reflectance spectroscopy (DRS). Possible formation mechanism for the growth of hollow microspheres was discussed. During the reactive process, ionic liquid [C(16)mim]Br played the role of solvent, reactant and template at the same time. Moreover, the photocatalytic activities of BiOBr flower-like hollow and porous structures were evaluated on the degradation of rhodamine B (RhB) under visible light irradiation. The results assumed that BiOBr porous nanospheres sample showed much higher photocatalytic activity than the conventionally prepared sample and TiO(2) (Degussa, P25). The relationship between the structure of the photocatalyst and the photocatalytic activities were also discussed in detail; it can be assumed that the enhanced photocatalytic activities of BiOBr materials could be ascribed to a synergistic effect, including high BET surface area, the energy band structure, the smaller particle size and light absorbance.     

Self-assembly and enhanced photocatalytic properties of BiOI hollow microspheres via a reactable ionic liquid

BiOI uniform flowerlike hollow microspheres with a hole in its surface structures have been successfully synthesized through an EG-assisted solvothermal process in the presence of ionic liquid 1-butyl-3-methylimidazolium iodine ([Bmim]I). The as-prepared samples were characterized by X-ray diffraction (XRD), scanning electron microscopy (SEM), transmission electron microscopy (TEM), energy-dispersive X-ray spectroscopy (EDS), nitrogen sorption, and diffuse reflectance spectroscopy (DRS). A possible formation mechanism for the growth of hollow microspheres was discussed. During the reactive process, ionic liquid not only acted as solvents and templates but also as an I source for the fabrication of BiOI hollow microspheres and was vital for the structure of hollow microspheres. Additionally, we evaluated the photocatalytic activities of BiOI on the degradation of methyl orange (MO) under visible light irradiation and found that as-prepared BiOI hollow microspheres exhibited higher photocatalytic activity than BiOI nanoplates and TiO(2) (Degussa, P25) did. On the basis of such analysis, it can be assumed that the enhanced photocatalytic activities of BiOI hollow microspheres could be ascribed to its energy band structure, high BET surface area, high surface-to-volume ratios, and light absorbance.     

Long TiO2 hollow fibers with mesoporous walls: sol-gel combined electrospun fabrication and photocatalytic properties

Long TiO2 hollow fibers with mesoporous walls have been fabricated with the sol-gel combined two-capillary spinneret electrospinning technique using a triblock copolymer (Pluronic, P123, (H(C2H5O)20(C3H7O)70 (C2H5O)20OH) as a pore-directing agent. The as-prepared hollow fibers were as long as 30 cm with an outer diameter of 0.1-4 microm and wall thickness of 60-500 nm. The diameters and wall thicknesses of the hollow fibers could be tuned by adjusting the electrospinning parameters. The fiber walls were composed of mesopores 6.7 nm in diameter as calculated from the N2 adsorption/desorption isotherm. The high-resolution TEM (HR-TEM) images exhibited that the mesopores were hexagonally aligned with a low order because of the curving of the pores. When comparing with other nanostructured TiO2 materials such as commercial TiO2 nanoparticles (P25, Degussa) and mesoporous TiO2 powders, the hollow fibers exhibited higher photocatalytic activities toward degradation of methylene blue and gaseous formaldehyde.     

TiO2-yNx纳米光催化剂的制备及其可见光响应机理

利用溶胶-凝胶技术,以尿素为氮源,采用原位掺杂方式制备了TiO2-yNx纳米粉体;以亚甲基蓝(MB)溶液在可见光下的光催化降解评价其可见光催化活性;考察了体系初始pH值、N的掺杂量和焙烧温度对样品可见光催化活性的影响。 结合XRD、XPS、ESR和DRS测试技术,研究了N掺杂纳米TiO2的可见光响应机理。 研究结果表明,TiO2-yNx纳米粉体的优化制备工艺条件为：体系初始pH=0.52,掺杂比n(N)∶n(Ti)=1∶6,焙烧温度为440 ℃。 此条件下制备的样品N含量为0.77%,为单一的锐钛矿相,平均粒径为19.0 nm,具有良好的可见光催化活性。 N掺杂导致TiO2纳米粉体的表面羟基含量增加,形成了大量束缚单电子的氧空位;N取代晶格O形成了N-Ti-O和O-N-Ti键合结构。 N掺杂导致TiO2纳米粒子的吸收带边红移,对可见光的吸收能力明显增强,这表明N掺杂改变TiO2电子结构,使带隙窄化,降低光响应阈值。 N掺杂TiO2纳米粒子的可见光响应归因于N取代掺杂形成的掺杂能级与氧空位形成的缺陷能级共同作用所致。     

Surfactant-assistant and facile synthesis of hollow ZnS nanospheres

Small and monodisperse ZnS hollow nanospheres with outer diameter ranging from 60 to 70 nm and wall thickness of 15-20 nm were fabricated in a large scale by a simple surfactant polyethylene glycol (PEG) assisted method. The diameter and the wall thickness of the hollow nanospheres could be controlled by manipulating the amount of PEG and the aging time, respectively. Moreover, the wall of these hollow nanospheres is very compact. The product was characterized by X-ray power diffraction (XRD), transmission electron microscopy (TEM), UV-vis spectrum and fluorescence spectroscopy. The photocatalytic activity of as-prepared ZnS hollow nanospheres was also evaluated by using methyl orange (MO) as a model organic compound and the result revealed that their photocatalytic activity is a little lower than that of Degussa P25 TiO(2) but better than that of ZnS nanocrystals prepared by literature method. Furthermore, a rational mechanism to the formation and evolution of the products is proposed.     

活性炭孔径和比表面积对TiO2/AC光催化性能的影响

采用“同步物理-化学活化法”二次活化商品活性炭, 制备不同孔径和比表面积的系列活性炭(AC)载体, 以偏钛酸为钛源, 利用均匀沉淀法制备TiO2负载型光催化剂(TiO2/AC), 用氮吸附、XRD、SEM等方法表征, 研究活性炭的孔径和比表面积对TiO2/AC性能的影响; 并通过降解水溶液中的亚甲基蓝(MB)研究TiO2/AC光催化氧化特性, 考察催化剂投加量、不同MB浓度等因素对光催化氧化的影响. 结果表明, 负载的TiO2粒子粒径为12-20 nm, 活性炭的比表面积大、平均孔径大有利于TiO2的均匀分散, 阻止TiO2晶粒生长, 有利于充分发挥TiO2小尺度效应; 另外, 活性炭吸附和TiO2光解的协同效应使TiO2/AC光催化剂对MB降解的效率显著提高. 动力学研究表明, TiO2/AC光催化降解MB反应符合表观一级动力学特征.     

陶瓷泡沫空气过滤器涂覆中孔TiO2薄膜用于室内空气净化中高效光催化降解NO

由于人们80%的时间呆在室内,室内空气的质量直接影响人类健康,因此近年来室内空气质量越来越受到人们的关注.室内污染物包括CO氮氧化物(NOx)和挥发性有机化合物(VOCs),它们给人体健康带来众多负面影响.更为重要的是,考虑到节能,现代建筑的空气密闭性大都较高,但这种减少吸入新鲜空气的设计直接导致室内各种污染物的累积.有些家用电器,如燃气灶和热水器,在使用的时候会涉及到煤、油和天然气的燃烧,特别是通风较差的情况下会成为室内主要的污染源.常规的治理技术,包括吸附和过滤,其成本相对较高,也不适用于低浓度污染物的治理.尤其是更换不及时的过滤器在排风系统中可能会成为VOCs的一个来源.因此,很有必要开发一种新型的技术以降低室内污染物的浓度和保持一个清洁的室内空气环境,从而保障人们的身体健康.光催化是去除室内空气污染物的有效方法.例如, TiO2、钛酸铋和钛酸锶等具有强氧化能力和稳定的光催化活性,因而是高效的光催化剂.一般而言,通常报道的TiO2光催化剂是高度分散的、或悬浮于液体介质中的细小颗粒或粉末.然而,粉末状的TiO2光催化剂不适宜于室内空气净化,因为它变得可吸入而对人体健康造成不利的影响.因此,人们尝试将TiO2颗粒作为薄膜固定在不同的刚性载体上,如玻璃、不锈钢和铝合金板.对基体进行涂覆可显著影响光催化时反应物的表面吸附行为.一般而言,光催化薄膜通常涂覆在平面上,如蜂窝空气过滤器.三维(3D)多孔的陶瓷泡沫对气体通过具有非常好的流体性质,因此本文以它作为涂覆的基体.这种陶瓷泡沫具有3D多孔结构,多种孔密度、比表面积和化学性质.3D多孔陶瓷泡沫空气过滤器的床层空隙率较高,因此使用时压降较低,且不像蜂窝空气过滤器,它具有复杂多变的孔结构,可增强流体的扰动和混合.另外,3D多孔陶瓷泡沫空气过滤器的开发多孔和网状的结构使得在催化体系具有非常好的气体动力学性质,催化剂表面和气体反应物有充分的接触.多孔材料在液相或气相催化反应中具有独特的优势,因此,陶瓷泡沫、多孔的氧化铝、多孔硅胶.分子筛和活性炭经常被用作催化剂载体.在固体基体上TiO2膜的形成可能使得TiO2光催化剂的有效比表面积降低,从而导致其光催化活性下降.然而,由于具有中孔结构的TiO2薄膜的比表面积大,其用于催化反应的活性位也更多,因此使用时仍然具有较高的活性.前期研究表明,涂覆在平面玻璃、不锈钢和氧化铝基体上的中孔TiO2薄膜用于环境净化时表现出增强的光催化效率.另外,室内环境中NO和NO2的浓度一般分别为几百个ppb之内和100 ppb以下.可见, NO是主要的室内空气污染物,对人体健康危害较大.基于此,本文首次采用反胶束法将中孔锐钛矿TiO2薄膜均匀一地涂覆在3D多孔高比表面积的泡沫过滤器上,采用X射线衍射、扫描电镜、X射线光电子能谱、N2吸附-脱附、紫外-可见光光谱和原子力显微镜对所制样品进行了表征,并将样品用于紫外光下催化降解NO,以揭示所制的中孔TiO2涂层具有高的比表面积和高的光催化活性,从而克服使用TiO2粉末所带来的不足.结果表明,由于中孔TiO2薄膜涂层具有较大的有效比表面积,其表面存在很多吸附活性位,用于吸附在反应过程中形成的水蒸汽、气相反应物和产物,因而具有更高的光催化活性,因此在陶瓷泡沫空气净化系统中可以高效地光催化NO降解：在所考察的不同孔密度的陶瓷泡沫过滤器涂覆的TiO2上400 ppb的NO单程转化率均在92.5%以上,高于涂覆在平面陶瓷砖上的TiO2.该陶瓷过滤器的3D多孔特性可增强流体的扰动和混合,使得气相反应物与光催化剂表面有着充分的接触;其大的孔密度也导致高的光催化速率.另外,本文所制样品在所有反应过程中均保持较高且稳定的NO降解速率,这表明其在NO降解反应中没有失活.     

Synthesis and photoluminescence of well-dispersible anatase TiO2 nanoparticles

High-purity anatase TiO(2) nanoparticles were prepared using a low-temperature sol-gel route. The as-prepared sample was characterized by X-ray diffraction, transmission electron microscopy, infrared spectroscopy, thermogravimetric analysis, UV-vis spectroscopy, and photoluminescence. It is shown that the as-prepared sample crystallized in a pure anatase phase with an average crystallite size of about 7 nm, and the surfaces were highly hydrated. These nanoparticles were stabilized as a water suspension via the cooperation of DLVO force and surface hydration force. These suspensions showed characteristic band-gap emission at 397+/-1.5 nm, which is a little red-shifted compared with the band-gap energy of indirect electronic transition measured in the UV-vis absorption spectrum. These observations were explained by the light-induced relaxation of polar water molecules in the surface hydration layer.     

ZnO和TiO2纳米粒子的光致发光性能及其与光催化活性的关系

采用沉淀法和溶胶-凝胶法制备了ZnO和TiO2及掺Zn2+的TiO2纳米粒子,用XRD和荧光光谱(FS)等手段对样品进行了表征,重点探讨了样品光致发光机制及与光催化活性的关系.结果表明,ZnO和TiO2样品在大于带隙能的光激发下均表现出明显的FS信号,热处理温度升高,FS信号强度下降,并且二者的FS信号类似,这可能与二者具有类似的电子能带结构有关,同时也说明FS信号主要源于表面氧空位以及吸附氧物种等引起的激子或表面态能级.掺杂Zn2+使TiO2纳米粒子FS信号增强,这主要与表面氧空位和缺陷等量增加有关;此外,在光催化氧化苯酚实验中,样品光催化活性与其FS信号强度顺序一致,即FS信号越强,活性越高.这是由于在光致发光过程中,FS信号主要源于表面氧空位,而在光催化反应中,表面氧空位有利于氧化反应进行.     

水热法合成多孔Ag_2S敏化二氧化钛催化剂及其可见光催化活性(英文)

Porous Ag2S sensitized TiO2 catalysts were synthesized by the hydrothermal process.The crystallization and porous structure of the Ag2S/TiO2 composite photocatalysts were investigated by X-ray diffraction,scanning electron microscopy with energy dispersive X-ray analysis,UV-Vis diffuse reflectance spectroscopy,and N2 adsorption.The Ag2S/TiO2 composites were mainly composed of anatase TiO2 and acanthite Ag2S.The absorption edge wavelengths of TiO2 and the Ag2S/TiO2 composite prepared with 3 mmol Na2S.5H2O were 400 and 800 nm,respectively,that is,the absorption edge of the composite had a pronounced red shift.The photocatalytic activity under visible light was investigated by the degradation of methylene blue with a UV-Vis spectrophotometer.The photocatalytic activities under visible light of the Ag2S/TiO2 photocatalysts were much higher than that of TiO2.     

C-N-S-TiO2光催化剂的制备、表征及其性能

以钛酸四丁酯为钛源、功能生物小分子胱氨酸为掺杂剂,采用溶胶-凝胶法同步合成了C-N-S-TiO2光催化剂,利用XRD、XPS、FT-IR和DRS等测试技术对样品的结构及物化性能进行了表征。XRD和DRS分析表明,共掺杂抑制了TiO2晶粒的生长,提高了晶相转变温度,且C-N-S-TiO2样品的吸收带边明显"红移",光吸收范围一直延长至800 nm左右。XPS分析结果显示,C-N-S-TiO2样品表面产生了杂质能级,C、S元素分别取代部分晶格Ti4+以CO23-和S6+形式存在;而N峰呈宽化状态,以O—Ti—N和Ti—O—N键存在,且样品表面羟基含量明显增加。以罗丹明B染料为模型污染物,考察了该催化剂的可见光催化活性。结果表明,与P25 TiO2比较,C-N-S-TiO2光催化剂活性得到改进,C-N-S-TiO2光催化剂在470～800 nm波长下辐射120 min后对罗丹明B的降解率可高达83%。     

负载型混晶纳米TiO_2/硅藻土复合材料的制备及其光催化性能

选用市售硅藻土作为载体,采用液相沉积法制备了负载型混晶纳米TiO2/硅藻土复合材料;采用扫描电镜、X射线衍射仪及红外光谱仪分析了复合材料的表面形貌和晶体结构;基于甲醛光催化降解实验考察了不同组成的负载型TiO2/硅藻土复合材料的光催化性能.结果表明,TiO2负载量为33.3%(TiO2与硅藻土的质量比为1∶2)的复合材料对甲醛光催化降解具有最佳催化活性.     

超声波辐射快速合成高光催化性能的BiOCl(Br)纳米片

在室温条件下,利用超声波辐射方法快速合成了四方状BiOCl(BiOBr)纳米片光催化剂。应用N2-物理吸附、X射线粉末衍射、扫描电镜、透射电镜、紫外可见光谱等手段对催化剂进行了表征,并以波长为λ=365 nm的紫外光和420 nm<λ<660 nm的可见光为光源,评价了该催化剂光催化降解酸性橙Ⅱ的活性。表征结果表明,超声波辐射可加速BiOCl和BiOBr晶化过程,显著提高BiOCl和BiOBr的结晶度,并使其晶粒发生细化,提高催化剂的比表面积。活性测试表明,声化学合成样品的光催化活性优于普通搅拌制备的样品。其中BiOCl的紫外光催化活性高于商业TiO2(P25)光催化剂。     

Photocatalytic Degradation of Acetaldehyde on Mesoporous TiO2: E?ects of Surface Area and Crystallinity on the Photocatalytic Activity

"Mesoporous TiO2 powder and films with worm-like channels were synthesized by an evaporation-induced self-assembly approach. The as-prepared samples were calcined at different temperature to investigate the effect of calcined temperature on the mesostructure and the photocatalytic activity. Acetaldehyde photodegradation in gas phase was employed to evaluate the photocatalytic activity of mesoporous TiO2. Results showed that all the calcined powder samples exhibited higher photocatalytic activities than that of Degussa P25. The sample calcined at 400 oC, which showed higher activity than other samples, possessed a homogeneous pore diameter of about 6.0 nm and an 11.0 nm crystalline anatase pore wall, as well as large surface area of 117 m2/g. It was speculated that two factors of surface area and crystallinity affected the photocatalytic activity of mesoporous TiO2 photocatalyst. The mesoporous TiO2 films fabricated by spin-coating also had high photocatalytic activities."     

Synthesis of carbon nitride hollow microspheres with highly hierarchical porosity templated by poly (ionic liquid) for photocatalytic hydrogen evolution

Hydrogen, as a sustainable and clean energy, has been considered as a promising candidate to replace fossil fuels. And it is meaningful to fabricate the photocatalysts to drive photocatalytic water splitting leading to hydrogen production. Herein, a facile approach was developed by the means of the template effect of poly (ionic liquid) and self-assembly of cyanuric acid and melamine through hydrogen bonds, to obtain carbon nitride hollow microspheres with highly hierarchical porosity. The influence of poly (ionic liquid) concentration on the structure and photocatalytic activity of as-prepared carbon nitride was investigated. The optimized carbon nitride hollow microspheres possessed the multiple porous channels and improved surface area (71 m²/g) due to the decomposition of poly (ionic liquid) and cyanuric acid-melamine supramolecular aggregates. Moreover, the as-prepared carbon nitride hollow microspheres exhibited a remarkable catalytic activity in the photocatalytic hydrogen evolution reaction under visible light irradiation. Especially, the sample CN-0.02 exhibits the highest hydrogen evolution rate (90.1 μmol h⁻¹). The outstanding photocatalytic activity is attributed to the high specific surface area, broad light absorption range and fast separation rate of photogenerated electron–hole pairs. This novel method opens up a new way toward the development of highly-active photocatalysts for water splitting.     

无定形TiO2可见光敏化降解染料污染物

采用一步水解法制备了无定形TiO2(Am-TiO2),并运用X射线衍射、X射线光电子能谱、N2吸附-脱附和紫外-可见漫反射光谱等手段对其进行了表征.结果表明,Am-TiO2具有大的比表面积(216m2/g)和丰富的表面羟基/化学吸附的水.与晶态TiO2相比,Am-TiO2的吸收带边明显蓝移(411nm→378nm),禁...     

Synthesis and visible light photocatalytic properties of polyoxometalate-thionine composite films immobilized on porous TiO2 microspheres

Multilayer films (PW(12)-TH)(n) (PW(12)=PW(12)O(40)(3-), TH=thionine) were immobilized on porous anatase TiO(2) microspheres by layer-by-layer (LbL) self-assembly method. The porous structure of TiO(2) was confirmed by transmission electron microscopy (TEM). Scanning electron microscopy (SEM) showed that TiO(2) template particles had a round shape with an average diameter of 250 nm. The composite films were characterized by FTIR spectroscopy, UV diffuse reflectance spectroscopy and XRD spectroscopy. The results confirmed the successful immobilization of (PW(12)-TH)(n) composite films onto TiO(2) microspheres, and the growth of PW(12)-TH layer pair was uniform. SEM and TEM were also used to characterize the morphology. When PW(12)-TH composite films were assembled on the template, the surface became rougher with the increasing number of layer pair. The lattice fringe of TiO(2) became weaker when immobilized (PW(12)-TH)(n). The photocatalytic properties of the microspheres toward a rhodamine B (RhB) solution were investigated under visible light irradiation. The combination of TiO(2) and PW(12) showed an excellent photocatalytic performance. Both TH sensitization and PW(12) adsorption played important roles during the process of photocatalysis. Moreover, the catalytic property and reusability of as-prepared catalyst were relevant to the number of PW(12)-TH bilayer. The kinetics of the photodecomposition to rhodamine B followed the first-order reaction.     

Hydrothermal synthesis, characterization, and photocatalytic performance of silica-modified titanium dioxide nanoparticles

Silica-modified titanium dioxides were prepared by a hydrothermal method and then characterized by XRD, FT-IR, XPS, TEM, and UV-visible spectroscopy. The silica-modified titanium dioxides were in anatase phase and had large surface areas. There was strong interaction between SiO2 and TiO2, and TiOSi bonds formed during the hydrothermal process. The addition of silica in TiO2 particles could effectively suppress the formation of the rutile phase and the growth of titanium dioxide crystals. DRS spectra proved an increase in the band-gap transition with the increase of silica. The silica-modified TiO2 nanoparticles exhibited better photocatalytic activity, which increased with the silica amount, in comparison with pure TiO2 nanoparticles. Due to better thermal stability, the photocatalytic activity of the silica-modified TiO2 sample held good photocatalytic activity even after calcined at 1273 K.     

中空Ta2O5/TiO2复合光催化剂的可控氧化制备及性能

以钛粉、钽粉为原料,炭黑作为反应性模板,通过熔盐法在炭黑表面原位生长了TaTiC₂纳米碳化物涂层,并以所得TaTiC₂/C复合物为碳化物前驱体,再经可控氧化制备出中空Ta₂O₅/TiO₂复合光催化剂。采用X射线粉末衍射（XRD）、扫描电子显微镜（SEM）、透射电子显微镜（TEM）、紫外-可见（UV-Vis）漫反射（DRS）及N₂物理吸附等手段对所制备的光催化剂进行形貌、显微结构及孔结构表征。以高压汞灯为紫外光源,以亚甲基蓝为目标降解物,通过光催化降解实验评价中空Ta₂O₅/TiO₂复合光催化剂的光催化活性。结果表明,熔盐法生长碳化物涂层厚度均匀（20~30 nm）,碳化物主要以TaTiC₂晶相存在且具有纳米级的颗粒尺寸。中空Ta₂O₅/TiO₂复合光催化剂同时具有200 nm左右的中空大孔结构及壳层10 nm左右的介孔结构。中空大孔和介孔的存在提高了所制备催化剂对亚甲基蓝的吸附能力。此外,TiO₂与Ta₂O₅通过电子能带结构的耦合,有效提高了光生电子和空穴的分离效率,从而显著提高了光催化活性。n_Ti∶n_Ta=2.5∶1.5时,相应的中空Ta₂O₅/TiO₂复合光催化剂表现出最佳的光催化活性,对亚甲基蓝的紫外光催化降解率高达97%。     

Enhanced photocatalytic degradation of C.I. Basic Violet 2 using TiO2-SiO2 composite nanoparticles

In this report, TiO(2) -SiO(2) composite nanoparticles were prepared by the thermal hydrolysis method using titanium tetrachloride and tetraethylorthosilicate as TiO(2) and SiO(2) precursors, respectively. The prepared nanoparticles were characterized by X-ray powder diffraction (XRD), Fourier-transform infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), energy dispersive X-ray spectroscopy (EDX), nitrogen adsorption/desorption and UV-Vis diffuse reflectance spectroscopy (DRS). The results indicated that, in comparison with pure TiO(2), TiO(2)-SiO(2) composite nanoparticles had a higher thermal stability, which prevents phase transformation from anatase to rutile. In addition, the TiO(2)-SiO(2) nanoparticles had a higher specific surface area, larger pore volume, greater band gap energy and smaller crystallite size. Thus, the surface area of TiO(2)-40% SiO(2) composite nanoparticles was about 17 times higher than that of pure TiO(2) nanoparticles. The photocatalytic activity of TiO(2)-SiO(2) composite nanoparticles in the photodegradation of C.I. Basic Violet 2 was investigated. The photodegradation rate of Basic Violet 2 using TiO(2)-40% SiO(2) nanoparticles calcined at 600°C was much faster than that using pure TiO(2) and Degussa P25 TiO(2) by 10.9 and 4.3 times, respectively. The higher photoactivity of the TiO(2)-SiO(2) composite nanoparticles was attributed to their higher surface area, larger pore volume, greater band-gap energy and smaller crystallite size compared with pure TiO(2).