铋—2,3,4—三羟基—4‘—磺基—偶氮苯配合物吸附波的研究

在０．０６ｍｏｌ／Ｌ柠檬酸钠－０．００３ｍｏｌ／Ｌ ＨＣｌ（ｐＨ６．５）介质中，２，３，４－三羟基－４＇－磺基－偶氮苯和铋产生灵敏的单扫描极谱导数峰，铋含量在０～６．７×１０＾－６ｍｏｌ／Ｌ范围内与波高成线性关系，检测限２．４×１０＾－８ｍｏｌ／Ｌ。用提出的方法测定了锡中的铋，并对反应机理进行了研究。     

一种基于形成杂多核络合物的荧光增敏效应的研究：Ⅲ.锰（Ⅱ）,钴（…

本研究了Ｍｎ＾２＋和Ｃｏ＾２＋对７－（８－羟基－３，６－二磺基萘偶氮）－８－羟基喹啉－５－磺酸－硼砂反应体系的混合荧光增敏作用。实验条件下，荧光增敏强度满足线性加和关系的范围是：Ｍｎ＾２＋浓度０￣２．９×１０＾－７ｍｏｌ／Ｌ；Ｃｏ＾２＋浓度０￣８．８～１０＾－７ｍｏｌ／Ｌ；总浓度不超过１．０×１０＾－６ｍｏｌ／Ｌ。检出限量为Ｍｎ＾２＋４．５×１０＾－９ｍｏｌ／Ｌ和Ｃｏ＾２＋１．４×１０＾－８ｍｏ     

硅钼杂多阴离子薄膜修饰电极线性扫描伏安法测定黑液中要溶性硅

本报导了以玻碳电极为基体的１∶１２硅钼杂多阴离子薄膜化学修，铈电极的制备及其电化学特性。并应用于导数伏安法测定。在４．０×１０＾－３ｍｏｌ／Ｌ９ＮＨ４）６Ｍｏ７Ｏ２４－６６．８×１０＾－２ｍｏｌ／ＬＮａ３Ｃｉｔ－０．４８ｍｏｌ／Ｌ ＮＨＯ３体系中，硅浓度在８．３×１０＾－７～１．７×１０＾－３ｍｏｌ／Ｌ。对可溶性硅（以ＳｉＯ２计）为２４５．０５ｍｇ／Ｌ的黑液，稀释１０倍后，取２．００ｍＬ平行测定     

高锰酸钾—抗坏血酸化学发光体系测定抗坏血酸

本文研究了高锰酸钾－抗坏血酸化学发光体系，建立了测定抗坏血酸的化学发光分析新方法，线性响应的浓度范围为５．０×１０＾－７ｍｏｌ／Ｌ～４．０×１０＾－５ｍｏｌ／Ｌ，检出限为３．０×１０＾－７ｍｏｌ／Ｌ，对２．５×１０＾－６ｍｏｌ／Ｌ抗坏血酸进行１０次平行测定，相对标准偏差为１．６％，考察了２２种物质的干扰情况。用于维生素Ｃ片剂及注射液中抗坏血酸含量测定，结果令人满意。     

鲁米诺—H2O2体系化学发光检测一氧化氮的研究

研究了用Ｌｕｍｉｎｏｌ－Ｈ２Ｏ２体系化学发光检测ＮＯ。优化实验条件下,当ＮＯ的浓度在１．７×１０＾－１２ｍｏｌ／Ｌ至１．７×１０＾－９ｍｏｌ／Ｌ范围内时,浓度的对数值与相对发光强度的对数值呈线性关系,检出限为１．７×１０＾－１３ｍｏｌ／Ｌ。     

吡哆醛的电化学行为研究

用单扫示波极谱法，吡哆醛在０．２ｍｏｌ／ＬＫＣｌ＋０．０２ｍｏｌ／Ｌ ｎａＯＨ底液中，产生一良好的寺阶导数峰，ＥＰ＝－１．３０±０．０１Ｖ（ＳＣＥ），其峰高与浓度在２×１０＾－７－２×１０＾－４ｍｏｌ／Ｌ范围内成线性关系，检出限为１×１０＾－７ｍｏｌ／Ｌ实验证明，其电极过程为伴有微弱吸附性质的的可逆扩散过程（ｎ＝２），不在弱酸性和中性介质中时，吡哆醛的电极过程为前行动力学过程，其电极反应机理为伴有     

化学发光法测定啤酒中的双乙酰

本报道了双乙酰被引入到鲁米诺－过氧化氢化学发光体系中可以增强发光强度的实验事实，建立了测定双乙酰的分析方法，地线范围为６．０×１０＾－７－１．２×１０＾－５ｍｏｌ／Ｌ，相对标准偏差为２％；检出限为４．１×１０＾－７ｍｏｌ／Ｌ，并应用于啤酒样品中双酰的分析，结果良好。     

聚氯乙烯膜氧氟沙星和曲马多选择电极的研制与应用

报道了以氧氟沙星碘化物与碘化铋的分子缔合物为电活性物的新型聚氯乙烯膜氧氟沙星选择电极。并以类似的方法报道了曲马多选择电极。氧氟沙星电极的特响应范围为１．０×１０＾－２－２．２×１０＾－５ｍｏｌ／Ｌ，斜率为３０ｍＶ／ＰＣ，检测限为１．６×１０＾－５ｍｏｌ／Ｌ。     

聚邻苯二胺修饰电极抗坏血酸氧化酶生物传感器的研究

本文报道了聚邻苯二胺／抗坏血酸氧化酶生物传感器，用这种传感器测定人体血清中的抗坏血酸，线性范围在１．０×１０＾－４～２．５×１０＾－７ｍｏｌ／Ｌ之间，响应时间为７ｓ，检测限为１．０×１０＾－８ｍｏｌ／Ｌ。该传感器具有选择性好、灵敏度高和响应时间短等特点。     

L—天冬门酰胺微生物电极的研制

以谷氨酸棒状杆菌作为生物催化剂，与基础氨气敏电极结合制成对Ｌ－天冬门酰胺响应的微生物电极，在３０℃时选择ＰＨ＝８．５的硼酸缓冲体系，测得电极的线性范围为７．１×１０＾－５－１．１×１０＾－２ｍｏｌ／Ｌ，斜率为５１．４ｍＶ／ｄｅｃ，检测下限为２．０×１０＾－５ｍｏｌ／Ｌ，响应时间为４－７ｍｉｎ寿命达３０ｄ以上。     

二氧化碳和丙烯直接合成甲基丙烯酸的NiPMo/TiO2催化剂的研究

用溶胶-凝胶法以磷钼酸(MPA)的镍盐溶液水解钛酸四丁酯制备了NiPMo/TiO2催化剂.使用ICP、 XRD、 TG-DTA、 IR、 TPD-MS和微反应技术研究了催化剂的化学组成、热稳定性、化学吸附性质和催化反应性能.杂多钼酸盐与TiO2通过O2-在TiO2表面发生了键合.在623 K下,杂多阴离子仍保持原有的Keggin结构.CO2在Lewis酸位Ni(Ⅱ)和Lewis碱位Ni-O-Mo的桥氧协同作用下生成CO2卧式吸附态Ni(Ⅱ)←O-(CO)←(O--Ni).丙烯有多种吸附态在催化剂上吸附.在563 K、 1 MPa和空速1500 h-1的反应条件下,丙烯的摩尔转化率为3.2%,产物MAA选择性为95%.     

Synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives

Different approaches for the synthesis of 1-benzyloxypyrazin-2(1H)-one derivatives from simple amino acids have been investigated. A library of 33 precursors for the preparation of N-hydroxy pyrazinones was obtained in moderate to good yields.     

Toward new camptothecins. Part 6: Synthesis of crucial ketones and their use in Friedländer reaction

In the context of the preparation of camptothecin and luotonin A analogs, the synthesis of some key keto-precursors and their use in Friedländer condensation are described. This paper also focuses on the stability of these keto intermediates and emphasizes the major differences between indolizinones and pyrroloquinazolinones series. Noteworthy is also the report of some original structures isolated as by-products of some experiments.     

CoFe2O4自形成磁性液体场致结构化对磁化的影响

The Langevin paramagnetic theory can’t describe the relation between magnetization of ferrofluids and applied magnetic field. The structuralization of ferrofluids, which is considered the main influence factor of the magnetization, is regarded. The part of magnetization works is deposited when the structure is forming. This action influences the magnetization of ferrofluids directly or indirectly. On the base of the “compressing” model, the Langevin function that usually describes the magnetization of ferrofluid is modified, and a well-fitted curve is obtained. An equation of the relation between the equivalent volume fraction after being “compressed” and the intensity of magnetic field is discovered, which approximately describes the process of magnetization. The relation between the approximate initial susceptibility and the volume fraction can be obtained from modified formula.     

Highly regioselective Buchwald–Hartwig amination at C-2 of 2,4-dichloropyridine enabling a novel approach to 2,4-bisanilinopyridine (BAPyd) libraries

The highly regioselective Buchwald–Hartwig amination at C-2 of the cheap and readily accessible reagent, 2,4-dichloropyridine with a range of anilines and heterocyclic amines is described. This new methodology is robust and provides a facile access to 4-chloro-N-phenylpyridin-2-amines on 0.25 mol scale. These intermediates undergo a further Buchwald–Hartwig amination at higher temperature to enable rapid exploration of the chemical space at C-4 and to provide a library of 2,4-bisaminopyridines.     

KMnO4-mediated oxidative CN bond cleavage of tertiary amines: Synthesis of amides and sulfonamides

KMnO₄-mediated oxidative CN bond cleavage of tertiary amines producing secondary amine was introduced, which was trapped by electrophiles (acyl chloride and sulfonyl chloride) to form amides and sulfonamides. The reaction could take place at mild condition, tolerating a wide range of function groups and affording products in moderate to excellent yields.     

Chemistry of heterocyclic compounds at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences, over 50 years (Review)

The review contains a concise historical account and information on the most significant researches undertaken by the staff at the A. E. Favorsky Irkutsk Institute of Chemistry, Siberian Branch of the Russian Academy of Sciences on the Chemistry of Heterocyclic Compounds. Dedicated to Academician of the Russian Academy of Sciences B. A. Trofimov on his 70th jubilee. Translated from Khimiya Geterotsiklicheskikh Soedinenii, No. 10, pp. 1443–1502, October, 2008.     

A general and convenient synthesis of 4-(tosylmethyl)semicarbazones and their use in amidoalkylation of hydrogen,heteroatom, and carbon nucleophiles

A general synthesis of previously unknown semicarbazone-based α-amidoalkylating reagents, 4-(tosylmethyl)semicarbazones, has been developed. The synthesis involved three-component condensation of semicarbazones of aliphatic or aromatic aldehydes with the same or other aldehydes and p-toluenesulfinic acid. The scope and limitations of this reaction were investigated. The compounds obtained were demonstrated to be an efficient α-(4-semicarbazono)alkylating agents. They were reacted with H- (sodium borohydride), O- (sodium methylate), S- (sodium phenylthiolate), N- (pyrrolidine, sodium succinimide), P- (trialkyl phosphites), and C-nucleophiles (sodium diethyl malonate) to give the corresponding products of the tosyl group substitution, 4-substituted semicarbazones, including analogues of nitrofurazone. Among the prepared compounds tested in vitro for antibacterial and antifungal activity, three nitrofuryl-containing semicarbazones exhibited high biological activities with minimum inhibitory concentration (MIC) values of 8–32 μg/mL.     

Sulfur-directed metal-free and regiospecific methyl C(sp3)–H imidation of thioanisoles

Regiospecific and direct imidation of the methyl C(sp³)–H bond of thioanisoles is realized under mild and metal-free conditions with N-fluorobis(benzenesulfonyl)imide as an oxidant and nitrogen source. Proposed mechanism suggests that thionium ion intermediates and a Pummerer-type reaction are involved. The imidation has advantages such as high step-economy, excellent functionality tolerance, and regiospecificity, giving structurally diverse imidation products.     

Synthesis of novel chiral bidentate hydroxyalkyl-N-heterocyclic carbene ligands and their application in palladium-catalyzed Mizoroki–Heck couplings and asymmetric addition of diethylzinc to benzaldehyde

A small library of new chiral bidentate hydroxyalkyl-imidazolium salts 1 is conveniently synthesized on multi-gram scale from inexpensive and commercially available chiral pool amino acids. The corresponding carbenes, generated by deprotonation of imidazolium salts 1, in combination with palladium(II) chloride were tested in the Mizoroki–Heck coupling reaction. The most significant results in terms of yields and reactivities were achieved with low catalyst loading. The catalytic activities of these imidazolium salts were also investigated in the asymmetric addition of diethylzinc to benzaldehyde. The use of MgO nanoparticles as an additive in conjunction with these ligands played a crucial role in increasing the efficiency of these reactions.