Ds介子几个重要衰变分支比的绝对测量

在正负电子对撞能量4.03GeV处,BES实验在BEPC对撞机上完成了D_s介子纯轻子衰变,半轻子衰变和φπ⁺分支比的绝对测量.文章详细描述了用于π与K识别的联合置信度方法,D_s单标记和双标记技术,以及计算Ds衰变分支比的最大似然函数.对所得物理结果做了讨论和评述.对未来D_s物理改进测量做了展望     

Ds衰变常数的测量

利用北京谱仪在e⁺e^－对撞质心能量4.03GeV所取得的约22.3pb^－1的数据,用先标记μ,后标记D_s的方法,共找到2个D_s→μv,3个D_s→τv→μvvv衰变候选事例,给出了D_s的纯轻子衰变的绝对分支比为:Br(D_s→μv)+0.72+0.70－0.44),Br(D_s→τv)=(14+11－8)%,并给出不依赖于模型假设的D_s衰变常数为:f_Ds=(355+96+28－90－28)MeV.     

微扰QCD方法计算稀有衰变B+→D+sK0

在标准模型中,稀有衰变道B⁺→D⁺_sK^*0只有通过纯湮没图才可以发生.这样这个衰变道的分支比很小.利用基于kT?因子化的微扰方法给出分支比的预测,发现它在10^－8的量级上.这个衰变道估计在将来的LHC上得到测量,对检验标准模型以及探寻新物理有着重要的意义.     

氮原子在800 nm附近的同位素位移

The Doppler-limited absorption spectra of ¹⁴N and ¹⁵N atoms were measured around 800 nm using concentration modulation spectroscopy to study their isotope shifts. The nitrogen atoms were generated by discharging molecular nitrogen buffered with helium in a homemade discharge tube. The isotope shifts of four multiplets (3s⁴P_J→3p⁴D_J^o, 3s⁴P_J→3p⁴P_J^o, 3s²D_J→5s²P_J^o, and 3p²P_J^o→5s²D_J^o) were measured and their J-dependent specific mass shifts were observed and discussed.     

关于D0→π－l+νl衰变过程的研究

用光锥QCD求和规则研究D⁰→π^－l⁺ν_l衰变过程, 首先计算D→π跃迁形状因子, 通过构造新的关联函数, 消除了twist-3波函数的不确定性给计算结果所带来的影响, 从而使计算结果更加精确. 计算得到的分支比与最近的实验数据相一致.     

QCD因子化方法下BS→π＋π－中湮灭强度的探索

利用QCD因子化方法, 并采用具有质量的有效胶子传播子来消除端点发散, 计算了纯湮没衰变B_S→π^＋π^－过程的CP平均分支比并对该过程的CP破坏进行了具体研究. 结果表明: 该过程的CP平均分支比为1.24×10^-7, 同时企鹅图对该过程起着主要贡献; B_S→π^＋π^－过程中直接CP破坏参数C_ππ估算为－0.05, 混合CP破坏参数S_ππ比较大,可达到0.18. 该过程在未来的LHC-b物理实验上是完全有可能被测量到的, 通过对该过程的研究能够使我们更好地了解B介子无璨衰变的动力学机制和胶子的性质.     

Pr3+离子单掺LiLuF4单晶的坩埚下降法生长及光谱性能研究

本文应用坩埚下降法技术在全密封铂金坩埚条件下生长了不同Pr³⁺离子掺杂浓度的高质量LiLuF₄单晶. 测定了单晶体从420 nm至500 nm的激发光谱. 在446 nm光激发下,观察到单晶体480 nm(³P₀→³H₄)蓝色发射带、522 nm(³P₁→³H₅)绿色发射及605 nm(¹D₂→³H₄)的红色发射,其对应的平均寿命分别为38.5、37.3和36.8 μs. 其荧光寿命明显大于Pr³⁺掺杂的氧化物单晶. 同时研究了激发波长和掺杂浓度对发射强度以及色度坐标的影响. 获得最佳的Pr³⁺浓度为∽0.5 mol%,并分析了环境温度从298 K 到443 K变化对荧光强度的影响. 结果表明随着温度的增加,荧光强度逐步变弱,其中³P₀→³H₄(480 nm)能级跃迁受温度影响最大,其次是³P₁→³H₅和¹D₂→³H₄.     

Bd0→φK0极化反常和Bd→φKS CP不对称的研究

在模型Ⅲ下, 仅考虑来自于中性规范玻色子H⁰, h⁰和 A⁰产生的树图阶味改变中性流的贡献, 并利用QCD因子化方法, 对B_d⁰→φK^*0衰变过程的极化反常和 B_d→φK_S衰变过程的CP不对称进行了研究, 经过计算发现, 在147<|λ_bsλ_ss|<165的参数范围内, 这两个过程中存在的反常现象能够同时给予解释.     

La2Zr2O7:Eu3+纳米棒的合成、表征及其荧光性能

采用传统固相法和水热法成功地制备出棒状La₂Zr₂O₇:Eu³⁺荧光粉. 利用X射线粉末衍射仪、透射电镜和荧光光谱仪等分析了产物的结构、形貌和发光特性. 结果表明红色荧光粉La₂Zr₂O₇:Eu³⁺有良好的晶相,属于立方结构,空间点群为Fd3m; 其形貌主要为纳米棒, 平均直径约47 nm, 长度为50～700 nm. 并对纳米棒的生长机理进行了探讨. 在466 nm蓝光激发下,La₂Zr₂O₇:Eu³⁺荧光粉能发射出Eu³⁺的特征红色荧光,发射主峰位于616 nm处,归属于Eu³⁺的⁵DO_→⁷F2_{超灵敏电偶极跃迁.此外,在产物的发射光谱中能够观察到⁵D}1_→⁷FJ _{(J=0, 1, 2)跃迁和⁵D}1_→⁷FJ _{(J=1, 2, 4)跃迁的劈裂峰,这说明Eu³⁺处在低对称性的晶体场格位中.}     

用Technicolor理论研究稀有辐射衰变Bc→Dsγ

在一代Technicolor(TCI)和带有一个无质量的标量二重态(TCⅡ)模型下,计算荷电的哥尔斯通粒子对衰变B_c→D_sγ的贡献,并把它们同标准模型的计算相比较,发现哥尔斯通粒子对电磁企鹅图的贡献很大(TCI下),在TCⅡ下贡献较小;而对弱湮没图的贡献可以忽略不计,还对同位旋三重态粒子π+p的质量进行了约束. 预言将来在LHC上能对不同模型下的分支比Br(B_c→D_sγ)的差异进行研究,进而对不同的模型进行检验.     

Hybrid Wavelength and Code Division Multiple Access in Optical Networks

A review of schemes for multiple access in fiber optic networks shows that a hybrid of wavelength and code division multiple access (WCDMA) combines the best features of both. In particular, the hybrid scheme retains the large information carrying capacity of wavelength division multiple access (WDMA) and flexibility of code division multiple access (CDMA). In this paper WDMA, optical CDMA (OCDMA), and WCDMA networks are discussed. In OCDMA networks, concept of incoherent and coherent coding including inverse decoding and matched filter is introduced. The delay performance of both WDMA and WCDMA networks, under the simple suboptimum access protocols based on cyclic search, is computed. It has been shown quantitatively that tuning delay significantly affects the delay performance of both WDMA and WCDMA networks. Futhermore, delay performance of WCDMA networks is always better than the WDMA networks for the same tuning delay, load, and number of users.     

Guided-Wave Two-Dimensional Acousto-Optic Scanner Using Proton-Exchanged Lithium Niobate Waveguide

Two-dimensional scanning of a 0.6328 mum guided-light beam has been realized using noncolinear acousto-optic (AO) coplanar Bragg diffraction together with colinear AO guided-mode to substrate radiation-mode conversion in a Z-cut Xpropagation LiNbO3 proton-exchanged (PE) waveguide. The two surface acoustic (SAW) waves utilized are at the center frequencies of 500 and 200 MHz, propagating in the Y and X axes, respectively. Two-dimensional scanning of approximately 720 resolvable light beam spots, namely, 18 40 (horizontal vertical) scanning, has been demonstrated using a light beam of 1.0 mm aperture. The total number of resolvable beam spots can be greatly increased from 720 by simply utilizing SAW transducers of larger bandwidth and a light beam of greater aperture. It should also be possible to significantly increase the diffraction efficiency from 3 % by optimizing the parameters of the PE waveguide and the SAWs.     

Femtosecond Transform-Limited Pulse Generation by Compensating for the Linear Chirp of SPM Spectra in Dispersion Shifted Fibers

A simple technique of pulse compression, based on the linear chirp compensation of self-phase modulation (SPM) spectra in dispersion shifted fibers, is demonstrated. The optimization procedure is carried out, for a short span of a single-mode fiber, using a parabolic law, which describes the behavior of the squared output pulse width versus the pump peak power in the case of Gaussian pulses. The experimental results give a minimum pulse duration of 233 fs, which is in good agreement with the model. Shorter and coherent pulses, down to 90 fs, have been obtained by inserting an interference filter at the optical output.     

Effect ofγ-radiation on the spectral luminescence characteristics of impure cadmium tungstate crystals

Results of a study of the effect of γ-radiation on the spectral luminescence properties of cadmium tungstate crystals doped with silver, bismuth, and molybdenum cations are presented. Spectral characteristics of the nondnnnoped crystals are briefly described. Absorption and photo and X-ray luminescence spectra of the crystals taken before and after exposure to γ-radiation (5.5·10⁴ Gy) are compared. It is found that the spectral characteristics of the crystals doped with silver, bismuth, and molybdenum cations do not change markedly after the exposure. The relation between the type of impurity-induced defects, individual characteristics of the impurity cations, and the character of the effect of γ-radiation on the spectral luminescence properties of impure crystals is analyzed (preliminarily). Translated from Zhurnal Prikladnoi Spektroskopii, Vol. 64, No. 1, pp. 55–60, January–February, 1997.     

Research on beamforming method for dual-line array with space mismatch between the two line arrays

The performance of port/starboard discrimination of dual-line array will be seriously degraded when the space between the two line arrays of the dual-line array is mismatched. The directivity function of the delay-sum and delay-subtract beamforming is deduced and the port/starboard discrimination of the delay-sum and delay-subtract beamforming is also studied both under the ideal status and the status under which the space between the two line arrays of the dual-line array is mismatched. Analysis results show the delay-subtract beamforming has better performance of port/starboard discrimination. At last, the sea trial results demonstrate the theoretical results.     

Sorting of bending magnets for the SSRF booster

The Shanghai Synchrotron Radiation Facility(SSRF)booster ring,a full energy injector for the storage ring,is deigned to accelerate the electron beam energy from 150MeV to 3.5GeV that demands high extraction efficiency at the extraction energy with low beam loss rate when electrons are ramping.Closed orbit distortion(COD)caused by bending magnet field uniformity errors which affects the machine performance harmfully could be effectively reduced by bending magnet location sorting.Considering the affections of random errors in measurement,both ideal sorting and realistic sorting are studied based on measured bending magnet field uniformity errors and one reasonable combination of bending magnets which can reduce the horizontal COD by a factor of 5is given as the final installation sequence of the booster bending magnets in this paper.     

Retrieval of ultraviolet skylight radiances and O3 slant column densities from balloon-borne limb spectrometer

With a novel light-weight and absolutely calibrated ultraviolet （UV） spectrometer, UV skylight radiances and O3 slant column densities are measured by balloon-borne limb measurements in Xinjiang area, China. UV skylight radiances measured at the height of 31 km are compared with the results from Modtran in the wavelength range from 290 to 420 nm. O3 slant column densities are derived from radiance spectra in the Huggins bands （320 - 335 nm） using differential optical absorption spectroscopy method. And the parameter exhibits a good correlation with the same value simulated by radiative transfer model （Tracy）. The O3 profile simultaneously measured by an O3 sonde is used as input in Tracy calculations. The O3 sonde is launched on the same balloon.     

Design optimization of highly sensitive LSPR enhanced surface plasmon resonance biosensors with nanoholes

For breaking through the sensitivity limitation of conventional surface plasmon resonance (SPR) biosensors, novel highly sensitive SPR biosensors with Au nanoparticles and nanogratings enhancement have been proposed recently.But in practice, these structures have obvious disadvantages.In this study, a nanohole based sensitivity enhancement SPR biosensor is proposed and the influence of different structural parameters on the performance is investigated by using rigorous coupled wave analysis (RCWA).Electromagnetic field distributions around the nanohole are also given out to directly explain the performance difference for various structural parameters.The results indicate that significant sensitivity increase is associated with localized surface plasmons (LSPs) excitation mediated by nanoholes.Except to outcome the weakness of other LSP based biosensors, larger resonance angle shift, reflectance amplitude, and sharper SPR curves' width are obtained simultaneously under optimized structural parameters.     

Polymer gratings based on photopolymerization for low-order distributed feedback polymer lasers

Novel polymer distributed feedback(DFB)gratings are fabricated based on photopolymerization to reduce lasing threshold of polymer lasers.A photopolymer formulation sensitive to 355-nm ultraviolet(UV)light is proposed for the fabrication of polymer gratings and it can be used to form polymer films by spin-coating process.A very low surface-relief depth ranging from 12.5 to about 1.0 nm has been demonstrated with a refractive-index modulation of about 0.012.The experimental results indicate that such polymer gratings have promising potentials for the fabrication of low-order DFB organic semiconductor lasers.     

A novel methodology for photometric compensation of projection display on patterned screen

We propose a novel methodology based on the projector-camera (ProCam) system to address the photometric compensation issue for the projection display on the patterned screen.The patterned screen is treated as the combination of a perfect white screen and a color modulator.The perfect white screen is used to automatically and accurately characterize the ProCam system offline using the polynomial model,and the parameters of the color modulator can be efficiently recovered by employing only two gray images based on the linear reflectance model.The experimental results show that the color artifacts of the display image can be greatly improved with this methodology,which demonstrates its feasibility and validity in the photometric compensation.