NiN(2)S(2) complexes as metallodithiolate ligands to Rh(I), Rh(II) and Rh(III)

Three molecular structures are reported which utilize the NiN(2)S(2) ligands -, (bis(mercaptoethyl)diazacyclooctane)nickel and -', bis(mercaptoethyl)diazacycloheptane)nickel, as metallodithiolate ligands to rhodium in oxidation states i, ii and iii. For the Rh(I) complex, the NiN(2)S(2) unit behaves as a bidentate ligand to a square planar Rh(I)(CO)(PPh(3))(+) moiety with a hinge or dihedral angle (defined as the intersection of NiN(2)S(2) and S(2)Rh(C)(P) planes) of 115 degrees . Supported by -' ligands, the Rh(II) oxidation state occurs in a dirhodium C(4) paddlewheel complex wherein four NiN(2)S(2) units serve as bidentate bridging ligands to two singly-bonded Rh(II) ions at 2.893(8) A apart. A compilation of the remarkable range of M-M distances in paddlewheel complexes which use NiN(2)S(2) complexes as paddles is presented. The Rh(III) state is found as a tetrametallic [Rh(-')(3)](3+) cluster, roughly shaped like a boat propeller and structurally similar to tris(bipyridine)metal complexes.     

Microbial metabolism of biologically active secondary metabolites from Nerium oleander L

Ursolic acid (1) and kaempferol (3) are two major constituents of the Mediterranean plant Nerium oleander L. Microbial metabolism of (1) with Aspergillus flavus (ATCC 9170) resulted in the formation of 3-oxo-ursolic acid derivative, ursonic acid (2). On the other hand, Cunninghamella blakesleeana (ATCC 8688A) was able to convert (3) into kaempferol 3-O-beta-D-glucopyranoside (4) as well as the new natural product kaempferol 4'-sulfate (5). Incubation of kaempferol with Mucor ramannianus (ATCC 9628) led to the isolation of one metabolite identified as kaempferol 4'-O-alpha-L-rhamnopyranoside (6). Transformation of kaempferol to the new compound kaempferol 7-O-beta-D-4-O-methylglucopyranoside (7) and herbacetin 8-O-beta-D-glucopyranoside (8) was observed after fermentation with Beauveria bassiana (ATCC 13144). Cytotoxic as well as antioxidant activities of the isolated metabolites were determined.     

Lewis base stabilized phosphanylborane

The abstraction of the Lewis acid from [W(CO)(5)(PH(2)BH(2)NMe(3))] (1) by an excess of P(OMe(3))(3) leads to the quantitative formation of the first Lewis base stabilized monomeric parent compound of phosphanylborane [H(2)PBH(2)NMe(3)] 2. Density functional theory (DFT) calculations have shown a low energetic difference between the crystallographically determined antiperiplanar arrangement of the lone pair and the trimethylamine group relative to the P-B core and the synperiplanar conformation. Subsequent reactions with the main-group Lewis acid BH(3) as well as with an [Fe(CO)(4)] unit as a transition-metal Lewis acid led to the formation of [(BH(3))PH(2)BH(2)NMe(3)] (3), containing a central H(3)B-PH(2)-BH(2) unit, and [Fe(CO)(4)(PH(2)BH(2)NMe(3))] (4), respectively. In oxidation processes with O(2), Me(3)NO, elemental sulfur, and selenium, the boranylphosphine chalcogenides [H(2)P(Q)BH(2)NMe(3)] (Q = S 5 b; Se 5 c) as well as the novel boranyl phosphonic acid [(HO)(2)P(O)BH(2)NMe(3)] (6 a) are formed. All products have been characterized by spectroscopic as well as by single-crystal X-ray structure analysis.     

Selective extraction of gallium from aluminum and indium using tripod phenolic ligands

Solvent extraction of trivalent group 13 metal cations such as aluminum, gallium and indium with tripod quadridentate phenolic ligand, tris(2-hydroxy-3,5-dimethylbenzyl)amine (H(3)tdmba), was investigated as fundamental study for their mutual separation. Gallium was extracted almost quantitatively as Ga(tdmba) (logK(ex)=-6.66+/-0.06 on using chloroform as extraction solvent), whereas aluminum and indium were hardly extracted due to steric hindrance on complexation of them with the ligand. The extracted Ga species was estimated as trigonal bipyramidal complex with one H(2)O molecule. Furthermore, extractability of Ga was increased by changing the ligand to more acidic tris(5-chloro-2-hydroxy-3-methylbenzyl)amine (H(3)tcmba) (logK(ex)=-6.18+/-0.18 on using dichloroethane as extraction solvent).     

Extraction of lead(II) and copper(II) from salicylate media by tributylphosphine oxide.

Tributylphosphine oxide (TBPO) is proposed as an extractant for the extraction of lead(II) and copper(II) from salicylate media. The optimum conditions were evaluated by varying the experimental parameters, such as the pH, sodium salicylate concentration, tributylphosphine oxide (TBPO) concentration, shaking period and various diluents. The probable extracted species, deduced from log-log plots were Pb(HSal)2.2TBPO and Cu(HSal)2.2TBPO. The extraction took place through a solvation mechanism. The method permits the binary separation of lead(II) and copper(II) from commonly associated elements as well as the mutual separation of lead(II) and copper(II). The method is applicable to the determination of lead(II) and copper(II) in various alloys as well as environmental and pharmaceutical samples.     

Compressional, temporal, and compositional behavior of H2-O2 compound formed by high pressure x-ray irradiation

X-ray irradiation was found to convert H(2)O at pressures above 2 GPa into a novel molecular H(2)-O(2) compound. We used optical Raman spectroscopy to explore the behavior of x-ray irradiated H(2)O samples as a function of pressure, time, and composition. The compound was found to be stable over a period of two years, as long as high pressure conditions (>2 GPa) were maintained. The Raman shifts for the H(2) and O(2) vibrons behaved differently from pure H(2) and O(2) as pressure was increased on the compound up to 70 GPa, indicating that it remains a distinct, molecular compound. Based on spectra taken from different locations in a single sample, it appears that multiple forms of the H(2)-O(2) compound exist. The structure and composition of the starting material plays an important role in compound formation, as we found that hydrogen-filled ice clathrate C(2) (H(2))H(2)O did not undergo the same dissociation as observed in ice VII upon x-ray irradiation until pressure was increased to above 10 GPa.     

Azimuthal Dipolar Rotor Arrays on Surfaces

A set of dipolar molecular rotor compounds was designed, synthesized and adsorbed as self-assembled 2D arrays on Ag(111) surfaces. The title molecules are constructed from three building blocks: (a) 4,8,12-trioxatriangulene (TOTA) platforms that are known to physisorb on metal surfaces such as Au(111) and Ag(111), (b) phenyl groups attached to the central carbon atom that function as pivot joints to reduce the barrier to rotation, (c) pyridine and pyridazine units as small dipolar units on top. Theoretical calculations and scanning tunneling microscopy (STM) investigations hint at the fact that the dipoles of neighboring rotors interact through space through pairs of energetically favorable head-to-tail arrangements.     

Preparation and photoelectron spectrum of the glycine molecular anion: assignment to a dipole-bound electron species with a high-dipole moment, non-zwitterionic form of the neutral core

We report the gas-phase preparation of negatively charged glycine as well as the Gly(H(2)O)(1,2) (-) complexes by entrainment of the neutral precursor into an ionized supersonic expansion tuned to optimize the (H(2)O)(n) (-)Ar(m) clusters. The photoelectron spectrum of Gly(-) displays the signature of a dipole-bound species, with sufficient vibrational fine structure to characterize the core neutral as a higher energy, non-zwitterionic isomer of the amino acid.     

Fabrication of bulk-modified carbon paste electrode containing alpha-PW12O40(3-) polyanion supported on modified silica gel: Preparation, electrochemistry and electrocatalysis

Alpha-PW(12)O(40)(3-) (PW(12)) supported on the surface of silica gel derivatized by 3-aminopropyl(triethoxy)silane (devoted briefly as SiNH(3)PW(12)) was synthesized and used as bulk modifier to fabricate a renewable three-dimensional chemically modified electrode. The electrochemical behavior of the modified electrode was characterized by cyclic voltammetry. There is an ionic bonding character between PW(12) and the surface amino groups of modified silica, which greatly improves the stability of SiNH(3)PW(12)-modified carbon paste electrode due to insolubility of silica gel in water. The SiNH(3)PW(12) bulk-modified carbon paste electrode not only maintains the electrochemical activity of PW(12), but also exhibits remarkable advantages of renewability, as well as simple preparation and inexpensive material. The modified electrode offers an excellent and stable electrocatalytic response for the reduction of IO(3)(-) and hydrogen peroxide. The SiNH(3)PW(12)-CPE is successfully applied as an electrochemical detector to monitor IO(3)(-) in flow injection analysis (FIA). The catalytic peak current was found to be linear with the IO(3)(-) concentration in the range 5x10(-6) to 1x10(-3)molL(-1). The detection limit of the proposed method was found to be 3.1x10(-6)molL(-1) for IO(3)(-) determination.     

Nanostructured pure gamma-Fe2O3 via forced precipitation in an organic solvent

Pure maghemite, gamma-Fe(2)O(3), was prepared as ultra fine particles in the nanometer-sized range via the forced precipitation method in an organic solvent. The precipitation of iron(III) ions, from iron(III) chloride in 2-propanol led selectively to highly dispersed particles of ferrihydrite, which upon treatment with temperatures higher than 200 degrees C under dynamic vacuum resulted in high-surface-area particles of gamma-Fe(2)O(3). Precipitation in water also led to ferrihydrite, but the final product, after heating at 300 degrees C, contained a mixture of gamma-Fe(2)O(3) and alpha-Fe(2)O(3) (hematite). The precipitation from iron(III) nitrate in water resulted in goethite which was converted to hematite upon heating. On the other hand, the final product in 2-propanol was a mixture of maghemite and hematite. The products were characterized by FTIR, TGA, XRD, and gas sorption analysis. Nitrogen gas adsorption studies for the pure gamma-Fe(2)O(3) samples revealed mesoporous particles with high surface areas in the range of 70-120 m(2) g(-1) after heat treatment at 300 degrees C. The gamma-Fe(2)O(3) particles retained their gamma-phase as well as their mesoporous structure at relatively high temperatures, as high as 400 degrees C.     

Two-dimensional resonance enhanced multiphoton ionization of H(i)Cl; i = 35, 37: state interactions, photofragmentations and energetics of high energy Rydberg states

Mass spectra were recorded for (2 + n) resonance enhanced multiphoton ionization (REMPI) of HCl as a function of resonance excitation energy in the 88865-89285 cm(-1) region to obtain two-dimensional REMPI data. Band spectra due to two-photon resonance transitions to number of Rydberg states (Ω' = 0, 1, and 2) and the ion-pair state V((1)Σ(+)(Ω' = 0)) for H(35)Cl and H(37)Cl were identified, assigned, and analyzed with respect to Rydberg to ion-pair interactions. Perturbations show as line-, hence energy level-, shifts, as well as ion signal intensity variations with rotational quantum numbers, J', which, together, allowed determination of parameters relevant to the nature and strength of the state interactions as well as dissociation and ionization processes. Whereas near-resonance, level-to-level, interactions are found to be dominant in heterogeneous state interactions (ΔΩ ≠ 0) significant off-resonance interactions are observed in homogeneous interactions (ΔΩ = 0). The alterations in Cl(+) and HCl(+) signal intensities prove to be very useful for spectra assignments. Data relevant to excitations to the j(3)Σ(0(+)) Rydberg states and comparison with (3 + n) REMPI spectra allowed reassignment of corresponding spectra peaks. A band previously assigned to an Ω = 0 Rydberg state was reassigned to an Ω = 2 state (ν(0) = 88957.6 cm(-1)).     

Monolayers (Langmuir films) behavior of multi-component systems composed of a bile acid with different sterols and with their 1:1 mixtures

Different physicochemical properties of Langmuir films (monolayers) composed of 10 mixed systems of a bile acid, deoxycholic acid (DC) with various plant sterols, such as stigmasterol (Stig), beta-sitosterol (Sito) and campesterol (Camp) and a stanol, cholestanol (Chsta) in addition to an animal sterol, cholesterol (Ch) [these sterols and Chsta are abbreviated as St] and DC with 1:1 St mixtures; (Ch+Chsta), (Ch+Stig), (Stig+Chsta), (Ch+Sito) and (Ch+Camp) on the substrate of 5M aqueous NaCl solution (pH 1.2) at 25 degrees C, were investigated in terms of mean surface area per molecule (A(m)), the partial molecular area (PMA), surface excess Gibbs energy (DeltaG((ex))), interaction parameter (I(p)) as well as activity coefficients (f(1) and f(2)) in 2-D phase of each binary (or ternary) component system and elasticity (Cs(-1)) of formed films; these were analyzed on the basis of the respective surface pressure (pi) versus A(m) isotherms as a function of mole fraction of Sts (X(st)) in the DC/St(s) mixtures at discrete surface pressures. Notable findings are: (i) all the binary component systems did form patched film type monolayers consisting of (a) DC-dominant film solubilizing a trace amount of St molecules and (b) St dominant film dissolving a small amount of DC molecules, (ii) DC in 2-D phase exhibited a transition from LE film to LC film at a constant pressure (pi(C)(1)) accompanied by compression and (iii) DeltaG((ex)) as well as I(p) was found to be greatly dependent on (a) the combinations of DC with different St species and (b) to be markedly varied by a difference in mixing ratio of DC to Sts. Compressibility (or elasticity) analyses and fluorescence microscopy images could support the above findings as well as interpretation.     

Iron tris(dibenzoylmethane)-centered polylactide stars: multiple roles for the metal complex in lactide ring-opening polymerization

Poly(lactic acid) (PLA)-supported dibenzoylmethane (dbm) and corresponding metal complexes have potential applications as biomaterials and catalysts. Using hydroxyl-functionalized dbm (i.e., dbmOH) as the initiator and Sn(oct)2 as the catalyst, lactide ring-opening polymerizations were unexpectedly slow (6 h), and PDIs broadened when molecular weights >10 000 were targeted. Because interactions between the dbm ligand and Sn(oct)2 may be responsible for the diminished catalyst activity and molecular weight control, iron(III) was employed as a protecting group to form Fe(dbmOH)3. Shorter reaction times (10 min) were noted with this trifunctional metalloinitiator and Sn(oct)2, and higher molecular weights were achievable. Moreover, it was discovered that Fe(dbmOH)3 serves not only as an initiator but also as a catalyst and activating group for the polymerization. Even without the tin catalyst, iron-centered polymers with low PDIs (<1.1) were obtained within 10 min ( approximately 70% monomer conversion). The resulting Fe(dbmPLA)3 stars were demetalated by acid treatment to generate dbmPLA for subsequent coordination to other metals. To explore the scope of iron beta-diketonate complexes as catalysts, additional studies were performed with dbmOH and benzyl alcohol initiators using either iron tris(dbm) or iron tris(acac) (acac = acetylacetonate) as the catalyst. Here too, PLA products were obtained, and the iron catalysts were readily separated by treatment with aqueous HCl.     

新型有机-无机杂化整体柱的制备及其在毛细管液相色谱及加压毛细管电色谱中的应用

以丙烯酰胺(AM)为单体,八乙烯基倍半硅氧烷(POSS)为交联剂,偶氮二异丁腈(AIBN)为引发剂,四氢呋喃(THF)为致孔剂,通过原位聚合法制备了poly(POSS-co-AM)有机-无机杂化整体柱,并对各反应物的配比进行了优化。结果表明,当功能单体与致孔剂、POSS与AM的质量比均为1.0: 5.0, AIBN的质量分数为0.1%时,杂化整体柱的柱效最高。无机材料的引入使整体柱结构均匀并具有良好的渗透性,该整体柱既能用于亲水色谱模式,也能用于反相色谱模式。将制备的整体柱用于毛细管液相色谱和加压毛细管电色谱分离核苷类、胺类、硝基苯胺类等化合物,获得了良好的效果。     

Aligned electrospun nanofibers for ultra-thin layer chromatography

The fabrication and implementation of aligned electrospun polyacrylonitrile (PAN) nanofibers as a stationary phase for ultra-thin layer chromatography (UTLC) is described. The aligned electrospun UTLC plates (AE-UTLC) were characterized to give an optimized electrospun mat consisting of high nanofiber alignment and a mat thickness of ∼25 μm. The AE-UTLC devices were used to separate a mixture of β-blockers and steroidal compounds to illustrate the properties of AE-UTLC. The AE-UTLC plates provided shorter analysis time (∼2–2.5 times faster) with improved reproducibility (as high as 2 times) as well as an improvement in efficiency (up to100 times greater) relative to non-aligned electrospun-UTLC (E-UTLC) devices.     

A comparison between electrokinetic capillary chromatography and absorption spectroscopy for the analysis of peptide-micelle association by weak hydrophobic interactions

Micellar electrokinetic capillary chromatography (MEKC) was compared to absorption spectroscopy to estimate equilibrium association constans (K(as)) for peptide-micelle systems involving three peptides (leucine-enkephalin, methionine-enkephalin and leucine-phenylalanine (LF)) and two surfactant micelles (sodium dodecyl sulfate (SDS) and cetyltrimethylammonium bromide (CTAB)). Buffer pH was chosen to minimize purely electrostatic interactions between peptides and micelles that could not be interrogated by absorption spectroscopy. Viscosity-corrected MEKC mobilities gave reasonably similar estimates of K(as) between the two methods for all three peptide-SDS micelle systems, with K(as) values ranging from 13.7 +/- 0.3 to 49 +/- 1 M(-1). For CTAB, estimates of K(as) for LF-CTAB micelle association were of the same order of magnitude as the SDS micelle by the two methods of estimation. On the other hand, enkephalin-CTAB micelle binding was about 10 times stronger (K(as) = 122 +/- 3 M(-1) to 311 +/- 9 M(-1)) than the enkephalin-SDS micelle binding. In addition, MEKC underestimated the K(as) values relative to spectroscopy by a factor of 2-3 for the enkephalin-CTAB system.     

Photocatalytic reduction of nitrite to dinitrogen in aqueous suspensions of metal-loaded titanium(IV) oxide in the presence of a hole scavenger: an ensemble effect of silver and palladium co-catalysts

Nitrite (NO(2)(-)) was photocatalytically reduced to dinitrogen (N(2)) in an aqueous suspension of two kinds of titanium(iv) oxide particles loaded with palladium and silver (Pd-TiO(2) and Ag-TiO(2)) at pH 8 under irradiation of UV light in the presence of sodium oxalate as a hole scavenger. The two metal-loaded TiO(2) photocatalysts had different roles in conversion of NO(2)(-) to N(2) and worked in an effective ensemble without conflict: (1) Pd-TiO(2) induced photocatalytic disproportionation of NO(2)(-) to N(2) and nitrate (NO(3)(-)) and (2) Ag-TiO(2) selectively reduced the thus-formed NO(3)(-) back to NO(2)(-) (partially to N(2)) with oxalate acting as a hole scavenger. When Pd-TiO(2) was used alone for NO(3)(-) reduction in the presence of sodium oxalate, Pd-TiO(2) induced fruitless photocatalytic decomposition of oxalate to carbon dioxide and dihydrogen. The presence of Ag-TiO(2) suppressed the fruitless decomposition of oxalate by Pd-TiO(2) because Ag-TiO(2) continuously provided NO(2)(-) in the reaction system using oxalate as a hole scavenger and Pd-TiO(2) therefore only worked as a photocatalyst for disproportionation of NO(2)(-) to N(2) and NO(3)(-) as it did when used alone.     

Sequential separation of actinides by ion chromatography coupled with on-line scintillation detection

The separation and measurement of actinides by ion chromatography (IC) coupled with on-line scintillation detection was investigated. Separation of (237)Np, (239)Pu, (241)Am, (244)Cm, (230)Th, and (233)U was accomplished using a Dionex CG5 guard column, CS5 separation column, and an elution program utilizing oxalic, diglycolic, and nitric acid eluents. Np(V) was eluted as a weak anionic oxalate complex or as free NpO(2)(+) cation, Am(III) and Cm(III) as anionic oxalate complexes, Pu(IV) and Th(IV) as nonionic diglycolate complexes, and U(VI) as a free uranyl cation. Response of the flow-cell detector was linear over the full range of activities tested (4-1500 Bq). The minimum detectable activities for the investigated analytes ranged from 3.6 Bq for (244)Cm to 5.4 Bq for (230)Th and (239)Pu. The corresponding minimum detectable concentrations based on a 1-L sample ranged from 3.6 to 5.4 KBq m(-3) (96 to 150 pCi L(-1)).     

Thermochemistry of fluorinated single wall carbon nanotubes.

The gradient corrected Perdew-Burke-Ernzerhof density functional in conjunction with a 3-21G basis set and periodic boundary conditions was employed to investigate the geometries and energies of C(2)F fluorinated armchair single wall carbon nanotubes (F-SWNT's) with diameters ranging from 16.4 to 4.2 A [(12,12) to (3,3)] as well as a C(2)F graphene sheet fluorinated on one side only. Using an isodesmic equation, we find that the thermodynamic stability of F-SWNT's increases with decreasing tube diameter. On the other hand, the mean bond dissociation energies of the C-F bonds increase as the tubes become thinner. The C-F bonds in the (5,5) F-SWNT's are about as strong as those in graphite fluoride (CF)(n)() and are also covalent albeit slightly (<0.04 A) stretched. Whereas a fluorine atom is found not to bind covalently to the concave surface of [60]fullerene, endohedral covalent binding is possible inside a (5,5) SWNT despite a diameter similar to that of the C(60) cage.     

A highly selective and sensitive thorium(IV) PVC membrane electrode based on a dithio-tetraaza macrocyclic compound.

A poly(vinyl chloride)-based membrane composed of dithio-tetraaza macrocyclic compound as a neutral carrier with sodium tetraphenylborate (NaTPB) as an anion excluder and nitrobenzene (NB) as plasticizer was prepared and investigated as a Th(IV)-selective electrode. The electrode exhibits a Nernstian slope of 14.2 +/- 0.3 mV per decade over a wide concentration range (1.0 x 10(-6) to 1.0 x 10(-1) M) with a detection limit of 8.0 x 10(-7) M between pH 3.5 and 9.5. The response time of the sensor is about 10 s and it can be used over a period of 5 months without any divergence in potential. The proposed membrane sensor revealed a good selectivity for Th(IV) over a wide variety of other metal ions and proved to be a better electrode in many respects than those reported in the literature. It was successfully applied as an electrode indicator as well as in the direct determination of thorium ions in standard and real samples.