Effect of lysine-28 side-chain acetylation on the nanomechanical behavior of alzheimer amyloid beta25-35 fibrils

Amyloid fibrils are self-associating filamentous structures formed from the 39- to 42-residue-long amyloid beta peptide (Abeta peptide). The deposition of Abeta fibrils is one of the most important factors in the pathogenesis of Alzheimer's disease. Abeta25-35 is a fibril-forming peptide that is thought to represent the biologically active, toxic form of the full-length Abeta peptide. We have recently shown that beta sheets can be mechanically unzipped from the fibril surface with constant forces in a reversible transition, and the unzipping forces differ in fibrils composed of different peptides. In the present work, we explored the effect of epsilon-amino acetylation of the Lys28 residue on the magnitude of the unzipping force of Abeta25-35 fibrils. Although the gross structure of the Lys28-acetylated (Abeta25-35_K28Ac) and wild-type Abeta25-35 (Abeta25-35wt) fibrils were similar, as revealed by atomic force microscopy, the fundamental unzipping forces were significantly lower for Abeta25-35_K28Ac (20 +/- 4 pN SD) than for Abeta25-35wt (42 +/- 9 pN SD). Simulations based on a simple two-state model suggest that the decreased unzipping forces, caused most likely by steric constraints, are likely due to a destabilized zippered state of the fibril.     

A strand-loop-strand structure is a possible intermediate in fibril elongation: long time simulations of amyloid-beta peptide (10-35)

A total of 6.2 micros molecular dynamics simulations of amyloid-beta (10-35) (Abeta) were performed in explicit water solvent. The results reveal that the collapsed-coil (cc) structure determined by experiments is stable at pH 5.6 for hundreds of nanoseconds, but it can exchange with a strand-loop-strand (SLS) structure on the microsecond time scale. The SLS structure has D23-K28 as a reverse loop and the central hydrophobic core and the C-terminal in hydrophobic contact. This SLS structure topologically resembles the proposed monomer conformation in fibrils. Since it has been suggested that a special conformation of Abeta is needed when the monomer binds to fibril ends to elongate fibrils, we propose that the SLS structure may be an important intermediate binding structure for Abeta fibril growth. Simulations at pH 2.0, which is used to mimic the mutation of E22Q and D23N, and at high temperature (400 K) indicate that the SLS structure is considerably populated under these conditions while the cc structure is disrupted. These results imply that the SLS structures may also be a binding intermediate in other conditions such as E22Q and/or D23N mutations and high temperature, which have been proved to promote fibril formation previously.     

Annular structures as intermediates in fibril formation of Alzheimer Abeta17-42

We report all-atom molecular dynamics simulations of annular beta-amyloid (17-42) structures, single- and double-layered, in solution. We assess the structural stability and association force of Abeta annular oligomers associated through different interfaces, with a mutated sequence (M35A), and with the oxidation state (M35O). Simulation results show that single-layered annular models display inherent structural instability: one is broken down into linear-like oligomers, and the other collapses. On the other hand, a double-layered annular structure where the two layers interact through their C-termini to form an NC-CN interface (where N and C are the N and C termini, respectively) exhibits high structural stability over the simulation time due to strong hydrophobic interactions and geometrical constraints induced by the closed circular shape. The observed dimensions and molecular weight of the oligomers from atomic force microscopy (AFM) experiments are found to correspond well to our stable double-layered model with the NC-CN interface. Comparison with K3 annular structures derived from the beta 2-microglobulin suggests that the driving force for amyloid formation is sequence specific, strongly dependent on side-chain packing arrangements, structural morphologies, sequence composition, and residue positions. Combined with our previous simulations of linear-like Abeta, K3 peptide, and sup35-derived GNNQQNY peptide, the annular structures provide useful insight into oligomeric structures and driving forces that are critical in amyloid fibril formation.     

Metal switch for amyloid formation: insight into the structure of the nucleus

The role of Zn2+ in pre-organizing Abeta(10-21) amyloid formation is shown to preferentially alter the relative rate of fibril nucleation and to have little influence on fibril propagation. Fibril morphology, as determined by small angle neutron scattering (SANS) and transmission electron microscopy (TEM), was unchanged in the presence and absence of Zn2+ in Abeta(10-21), as well as in a series of site-specifically altered variants. The metal-independence of the Abeta(10-21)H13Q peptide suggested that the increase in nucleation rate in Abeta(10-21) is due to Zn2+-mediated inter-sheet interactions, involving both histidine 13 and histidine 14.     

Molecular dynamics study of the beta amyloid peptide of Alzheimer's disease and its divalent copper complexes

The Abeta1-42 monomer structure was assessed with a 790 ns molecular dynamics (MD) simulation, and the results were compared with the NMR experiment on Abeta10-35 and Abeta1-40. Previous theoretical work in a model of the His13-His14 region of Abeta defined the possible Cu(II) binding geometries at this site (Raffa et al. J. Biol. Inorg. Chem. 2005, 10, 887-902). MD simulations totalling almost 2 micros were also carried out on Cu(II)/Abeta1-42 systems, using the ab initio structures as templates for the copper binding site. This work finds that the copper-free Abeta1-42 system may stabilize after approximately 350 ns into a collapsed coil conformation, and we find good agreement with some, but not all, of the structural features determined experimentally for the Abeta10-35 and Abeta1-40 peptides. The results of the Cu(II)/Abeta1-42 systems are compared to the Cu(II)-free Abeta1-42 simulation.     

Surface-induced aggregation of beta amyloid peptide by co-substituted alkanethiol monolayers supported on gold

The primary pathological characteristic of Alzheimer's disease is the presence in the brain of self-assembled beta amyloid (Abeta) protein fibrils, consisting of 35-43 amino acid residues. The toxicity of the aggregated protein structures has previously been proposed to be related to the interaction of Abeta fibrils with neuronal membranes (phospholipid bilayers). Here, surfaces consisting of self-assembled alkanethiol monolayers with different end groups--supported on Au--are used to test the effect of surface chemistry on the structure and morphology of aggregates formed from an active fragment (Abeta10-35) of the Abeta peptide. The influence of monolayer nature (end group) on the aggregation of Abeta10-35 was examined using reflection-absorption infrared spectroscopy (RAIRS) and scanning force microscopy (SFM). Evaluation of the SFM and RAIRS data reveals the presence of Abeta10-35 protein on the various monolayer surfaces, with the surface protein possessing predominantly beta-sheet and random-coil conformations. Time-dependent studies of the extent of Abeta10-35 aggregation and deposition on the various surfaces and the effect of the monolayers on seeding of Abeta10-35 aggregates in solution are also discussed.     

Amyloid beta-peptide oligomerization in silico: dimer and trimer

Soluble oligomers of Alzheimer's amyloid beta protein (Abeta) may act as effectors of neurotoxicity in early stages of Alzheimer's disease. Detailed information about the structure of Abeta in atomistic level and the dynamics of assembly of monomeric Abeta into oligomeric structures is rather elusive. We have performed replica exchange molecular dynamics (REMD) simulations on the formation of the dimer and trimer of Abeta10-35 peptide. We have observed spontaneous formation of several basic structural units that may act as a template or an intermediate for further aggregation of Alzheimer's Abeta protein. Various conformers, including interlocking structures of experimentally known bend double beta strands, are identified.     

Structure and dynamics of the Abeta(21-30) peptide from the interplay of NMR experiments and molecular simulations

We combine molecular dynamics simulations and new high-field NMR experiments to describe the solution structure of the Abeta(21-30) peptide fragment that may be relevant for understanding structural mechanisms related to Alzheimer's disease. By using two different empirical force-field combinations, we provide predictions of the three-bond scalar coupling constants ((3)J(H(N)H(alpha))), chemical-shift values, (13)C relaxation parameters, and rotating-frame nuclear Overhauser effect spectroscopy (ROESY) crosspeaks that can then be compared directly to the same observables measured in the corresponding NMR experiment of Abeta(21-30). We find robust prediction of the (13)C relaxation parameters and medium-range ROESY crosspeaks by using new generation TIP4P-Ew water and Amber ff99SB protein force fields, in which the NMR validates that the simulation yields both a structurally and dynamically correct ensemble over the entire Abeta(21-30) peptide. Analysis of the simulated ensemble shows that all medium-range ROE restraints are not satisfied simultaneously and demonstrates the structural diversity of the Abeta(21-30) conformations more completely than when determined from the experimental medium-range ROE restraints alone. We find that the structural ensemble of the Abeta(21-30) peptide involves a majority population (approximately 60%) of unstructured conformers, lacking any secondary structure or persistent hydrogen-bonding networks. However, the remaining minority population contains a substantial percentage of conformers with a beta-turn centered at Val24 and Gly25, as well as evidence of the Asp23 to Lys28 salt bridge important to the fibril structure. This study sets the stage for robust theoretical work on Abeta(1-40) and Abeta(1-42), for which collection of detailed NMR data on the monomer will be more challenging because of aggregation and fibril formation on experimental timescales at physiological conditions. In addition, we believe that the interplay of modern molecular simulation and high-quality NMR experiments has reached a fruitful stage for characterizing structural ensembles of disordered peptides and proteins in general.     

Amyloid-like formation by self-assembly of peptidolipids in two dimensions

The accumulation of beta-amyloid peptide (Abeta) in the human brain is known to be the major cause that drives Alzheimer's disease pathogenesis. Abeta, a 39-42 amino acid peptide, is the cleavage product of amyloid precursor protein in the hydrophobic transmembrane region. The present study employs a two-dimensional (2D) approach. Two synthetic peptidolipids, C18-IIGLM-OH and C18-IIGLM-NH2, are selected based on the fragment 31-35 of Abeta which is recognized as one of the determining segments that induces formation of amyloid fibril plaques. The aliphatic hydrocarbon chain C18 is attached to the N-terminal of the fragment 31-35 to facilitate the 2D study at the air-water interface. The aggregation process is observed by two measurements: (1) surface pressure-area and surface dipole moment-area isotherms and (2) epifluorescence microscopy of the Langmuir films to investigate the topography of the amyloid-like formation.     

Computational study on the structural diversity of amyloid Beta Peptide (abeta(10-35)) oligomers

We studied the oligomerization of Alzheimer amyloid beta peptide (Abeta) using a replica exchange molecular dynamics (REMD) simulation. The simulation was performed with Abeta(10-35) dimers, trimers, and tetramers. Extensive REMD simulations illustrated several possible oligomer conformations. As the size of the oligomer increased from a dimer to a tetramer, the number of possible configurations was reduced. We identified all the possible conformations for each oligomer and characterized their temperature dependence. It was found that the detailed structures of the oligomers, which may act as folding intermediates, are highly sensitive to the parameters of the simulation environment such as temperature and concentration. Structural diversities of Abeta oligomers suggest multiple pathways of the aggregation process.     

The unique Alzheimer's β-amyloid triangular fibril has a cavity along the fibril axis under physiological conditions

Elucidating the structure of Aβ(1-40) fibrils is of interest in Alzheimer's disease research because it is required for designing therapeutics that target Aβ(1-40) fibril formation at an early stage of the disease. M35 is a crucial residue because of its potential oxidation and its strong interactions across β-strands and across β-sheets in Aβ fibrils. Experimentally, data for the three-fold symmetry structure of the Aβ(9-40) fibril suggest formation of tight hydrophobic core through M35 interactions across the fibril axis and strong I31-V39 interactions between different cross-β units. Herein, on the basis of experimental data, we probe conformers with three-fold symmetry of the full-length Aβ(1-40). Our all-atom molecular dynamics simulations in explicit solvent of conformers based on the ssNMR data reproduced experimental observations of M35-M35 and I31-V39 distances. Our interpretation of the experimental data suggests that the observed ～5-7 ? M35-M35 distance in the fibril three-fold symmetry structure is likely to relate to M35 interactions along the fibril axis, rather than across the fibril axis, since our measured M35-M35 distances across the fibril axis are consistently above 15 ?. Consequently, we revealed that the unique Aβ(1-40) triangular structure has a large cavity along the fibril axis and that the N-termini can assist in the stabilization of the fibril by interacting with the U-turn domains or with the C-termini domains. Our findings, together with the recent cyroEM characterization of the hollow core in Aβ(1-42) fibrils, point to the relevance of a cavity in Aβ(1-40/1-42) oligomers which should be considered when targeting oligomer toxicity.     

Benchmarking implicit solvent folding simulations of the amyloid beta(10-35) fragment

A pathogenetic feature of Alzhemier disease is the aggregation of monomeric beta-amyloid proteins (Abeta) to form oligomers. Usually these oligomers of long peptides aggregate on time scales of microseconds or longer, making computational studies using atomistic molecular dynamics models prohibitively expensive and making it essential to develop computational models that are cheaper and at the same time faithful to physical features of the process. We benchmark the ability of our implicit solvent model to describe equilibrium and dynamic properties of monomeric Abeta(10-35) using all-atom Langevin dynamics (LD) simulations, since Alphabeta(10-35) is the only fragment whose monomeric properties have been measured. The accuracy of the implicit solvent model is tested by comparing its predictions with experiment and with those from a new explicit water MD simulation, (performed using CHARMM and the TIP3P water model) which is approximately 200 times slower than the implicit water simulations. The dependence on force field is investigated by running multiple trajectories for Alphabeta(10-35) using the CHARMM, OPLS-aal, and GS-AMBER94 force fields, whereas the convergence to equilibrium is tested for each force field by beginning separate trajectories from the native NMR structure, a completely stretched structure, and from unfolded initial structures. The NMR order parameter, S2, is computed for each trajectory and is compared with experimental data to assess the best choice for treating aggregates of Alphabeta. The computed order parameters vary significantly with force field. Explicit and implicit solvent simulations using the CHARMM force fields display excellent agreement with each other and once again support the accuracy of the implicit solvent model. Alphabeta(10-35) exhibits great flexibility, consistent with experiment data for the monomer in solution, while maintaining a general strand-loop-strand motif with a solvent-exposed hydrophobic patch that is believed to be important for aggregation. Finally, equilibration of the peptide structure requires an implicit solvent LD simulation as long as 30 ns.     

Why Is the C-terminus of Abeta(1-42) more unfolded than that of Abeta(1-40)? Clues from hydrophobic interaction

Abeta(1-40) and Abeta(1-42) are the main forms of amyloid beta (Abeta) peptides in the brain of Alzheimer's patients; however, the latter possesses much stronger aggregation and deposition propensity than the former, which is partially attributed to the more unfolded C-terminus of Abeta(1-42) than that of Abeta(1-40). To explore the physical basis underlying the different dynamic behaviors of both Abeta peptides, parallel molecular dynamics (MD) simulations on Abeta(1-40) and Abeta(1-42) were performed to investigate their thermal unfolding processes. It is revealed that the addition of residues 41 and 42 in Abeta(1-42) disrupts the C-terminal hydrophobic core, which triggers the unraveling of the C-terminal helix of Abeta(1-42). This conclusion is supported by the MD simulation on the I41A mutant of Abeta(1-42), in which the C-terminal helix possesses relatively higher conformational stability than that of wild type Abeta(1-42) owing to the change in hydrophobic interaction patterns.     

Amyloid beta-protein: monomer structure and early aggregation states of Abeta42 and its Pro19 alloform

The amyloid beta-protein (Abeta) is a seminal neuropathic agent in Alzheimer's disease (AD). Recent evidence points to soluble Abeta oligomers as the probable neurotoxic species. Among the naturally occurring Abeta peptides, the 42-residue form Abeta42 is linked particularly strongly with AD, even though it is produced at approximately 10% of the levels of the more abundant 40-residue form Abeta40. Here, we apply mass spectrometry and ion mobility to the study of Abeta42 and its Pro19 alloform. The Phe19 --> Pro19 substitution blocks fibril formation by [Pro19]Abeta42. Evidence indicates that solution-like structures of Abeta monomers are electrosprayed and characterized. Unfiltered solutions of Abeta42 produce only monomers and large oligomers, whereas [Pro19]Abeta42 solutions produce abundant monomers, dimers, trimers, and tetramers but no large oligomers. When passed through a 10,000 amu filter and immediately sampled, Abeta42 solutions produce monomers, dimers, tetramers, hexamers, and an aggregate of two hexamers that may be the first step in protofibril formation. These results are consistent with recently published photochemical cross-linking data and lend support to recent aggregation mechanisms proposed by Bitan, Teplow, and co-workers [J. Biol. Chem. 2003, 278, 34882-34889].     

Energy landscapes of the monomer and dimer of the Alzheimer's peptide Abeta(1-28)

The cytotoxicity of Alzheimer's disease has been linked to the self-assembly of the 4042 amino acid of the amyloid-beta (Abeta) peptide into oligomers. To understand the assembly process, it is important to characterize the very first steps of aggregation at an atomic level of detail. Here, we focus on the N-terminal fragment 1-28, known to form fibrils in vitro. Circular dichroism and NMR experiments indicate that the monomer of Abeta(1-28) is alpha-helical in a membranelike environment and random coil in aqueous solution. Using the activation-relaxation technique coupled with the OPEP coarse grained force field, we determine the structures of the monomer and of the dimer of Abeta(1-28). In agreement with experiments, we find that the monomer is predominantly random coil in character, but displays a non-negligible beta-strand probability in the N-terminal region. Dimerization impacts the structure of each chain and leads to an ensemble of intertwined conformations with little beta-strand content in the region Leu17-Ala21. All these structural characteristics are inconsistent with the amyloid fibril structure and indicate that the dimer has to undergo significant rearrangement en route to fibril formation.     

"Click peptide" based on the "o-acyl isopeptide method": control of A beta1-42 production from a photo-triggered A beta1-42 analogue

A clear understanding of the dynamic events of amyloid beta peptide (Abeta) 1-42, such as the folding, self-assembly, and aggregation processes, would be of great significance in Alzheimer's disease (AD) research. However, elucidation of these Abeta1-42 dynamic events is a difficult issue due to uncontrolled polymerization, which also poses a significant obstacle for establishing an experimental system that clarifies the pathological function of Abeta1-42. On the basis of the O-acyl isopeptide method, we herein developed a novel photo-triggered "click peptide" of Abeta1-42, for example, 26-N-Nvoc-26-AIAbeta42, in which the photocleavable 6-nitroveratryloxycarbonyl (Nvoc) group was introduced at the alpha-amino group of Ser26 in 26-O-acyl isoAbeta1-42 (26-AIAbeta42). From the results, (1) the click peptide did not exhibit the self-assembling nature under physiological conditions due to one single modified ester; (2) photoirradiation of the click peptide and subsequent O-N intramolecular acyl migration afforded the intact Abeta1-42 with a quick and one-way conversion reaction (so-called "click"), while the click peptide was stable under nonphotolytic or storage conditions. In addition, it is advantageous that no additional fibril inhibitory auxiliaries were released during conversion to Abeta1-42. This method provides a novel system useful for investigating the dynamic biological functions of Abeta1-42 in AD by inducible activation of Abeta1-42 self-assembly.     

Thermodynamics of beta-amyloid fibril formation

Amyloid fibers are aggregates of proteins. They are built out of a peptide called beta-amyloid (Abeta) containing between 41 and 43 residues, produced by the action of an enzyme which cleaves a much larger protein known as the amyloid precursor protein (APP). X-ray diffraction experiments have shown that these fibrils are rich in beta-structures, whereas the shape of the peptide displays an alpha-helix structure within the APP in its biologically active conformation. A realistic model of fibril formation is developed based on the 17 residues Abeta12-28 amyloid peptide, which has been shown to form fibrils structurally similar to those of the whole Abeta peptide. With the help of physical arguments and in keeping with experimental findings, the Abeta12-28 monomer is assumed to be in four possible states (i.e., native helix conformation, beta-hairpin, globular low-energy state, and unfolded state). Making use of these monomeric states, oligomers (dimers, tertramers, and octamers) were constructed. With the help of short, detailed molecular dynamics calculations of the three monomers and of a variety of oligomers, energies for these structures were obtained. Making use of these results within the framework of a simple yet realistic model to describe the entropic terms associated with the variety of amyloid conformations, a phase diagram can be calculated of the whole many-body system, leading to a thermodynamical picture in overall agreement with the experimental findings. In particular, the existence of micellar metastable states seem to be a key issue to determine the thermodynamical properties of the system.     

Absolute structural constraints on amyloid fibrils from solid-state NMR spectroscopy of partially oriented samples

We demonstrate that absolute, molecular-level structural information can be obtained from solid-state NMR measurements on partially oriented amyloid fibrils. Specifically, we show that the direction of the fibril axis relative to a carbonyl 13C chemical shift anisotropy (CSA) tensor can be determined from magic-angle spinning (MAS) sideband patterns in 13C NMR spectra of fibrils deposited on planar substrates. Deposition of fibrils on a planar substrate creates a highly anisotropic distribution of fibril orientations (hence, CSA tensor orientations) with most fibrils lying in the substrate plane. The anisotropic orientational distribution gives rise to distorted spinning sideband patterns in MAS spectra from which the fibril axis direction can be inferred. The experimentally determined fibril axis direction relative to the carbonyl CSA tensor of Val12 in fibrils formed by the 40-residue beta-amyloid peptide associated with Alzheimer's disease (Abeta1-40) agrees well with the predictions of a recent structural model (Petkova et al. Proc. Natl. Acad. Sci. U.S.A. 2002, 99, 16742-16747) in which Val12 is contained in a parallel beta-sheet in the cross-beta motif characteristic of amyloid fibrils.     

Effects of mutation on the amyloidogenic propensity of apolipoprotein C-II(60-70) peptide

Using experimental and computational methods we identified the effects of mutation on the structure and dynamics of the amyloidogenic peptide apoC-II(60-70), in monomeric and oligomeric states. Methionine (Met60) substitutions to hydrophilic Gln, hydrophobic Val, and methionine sulfoxide residues were investigated and the results compared with observations of fibril formation by the wild-type, Met60Gln, Met60Val, and oxidised Met60 (oxi-Met) apoC-II(60-70) peptides. ThT fluorescence measurements showed fibril formation by all peptides, however with different kinetics. The wild-type and Met60Val peptides formed fibrils fastest, while oxi-Met and Met60Gln peptides exhibited significantly longer lag phases. Molecular dynamics simulations showed that the mutated monomers exhibited structural features consistent with fibril-forming propensity, such as β-hairpin conformation and a hydrophobic core. However, important differences to the wild-type were also noted, such as increased structural flexibility (oxi-Met and Met60Gln systems) and a broader distribution of the aromatic angle orientation, which could contribute to the different fibrillation kinetics observed in these peptides. Our results also showed that the critical nucleus size for fibril formation by apoC-II(60-70) may not be very large, since tetrameric oligomers in anti-parallel configuration were very stable within the 100 ns of simulations. The single-point mutations Met60Val and Met60Gln had no significant effect on the structural stability of the tetramer. The rate of fibril formation by apoC-II(60-70) peptides was generally much faster compared to longer apoC-II(56-76) peptides. Also, the effects of amino acid modifications on the kinetics of peptide fibril formation differ from the effects observed for apoC-II(56-76) and full-length apoC-II, suggesting that additional mechanisms are involved in fibril formation by mature apoC-II.     

Formation and stabilization model of the 42-mer Abeta radical: implications for the long-lasting oxidative stress in Alzheimer's disease

Amyloid fibrils mainly consist of 40-mer and 42-mer peptides (Abeta40, Abeta42). Abeta42 is believed to play a crucial role in the pathogenesis of Alzheimer's disease because its aggregative ability and neurotoxicity are considerably greater than those of Abeta40. The neurotoxicity of Abeta peptides involving the generation of free radicals is closely related to the S-oxidized radical cation of Met-35. However, the cation's origin and mechanism of stabilization remain unclear. Recently, structural models of fibrillar Abeta42 and Abeta40 based on systematic proline replacement have been proposed by our group [Morimoto, A.; et al. J. Biol. Chem. 2004, 279, 52781] and Wetzel's group [Williams, A. D.; et al. J. Mol. Biol. 2004, 335, 833], respectively. A major difference between these models is that our model of Abeta42 has a C-terminal beta-sheet region. Our biophysical study on Abeta42 using electron spin resonance (ESR) suggests that the S-oxidized radical cation of Met-35 could be generated by the reduction of the tyrosyl radical at Tyr-10 through a turn structure at positions 22 and 23, and stabilized by a C-terminal carboxylate anion through an intramolecular beta-sheet at positions 35-37 and 40-42 to form a C-terminal core that would lead to aggregation. A time-course analysis of the generation of radicals using ESR suggests that stabilization of the radicals by aggregation might be a main reason for the long-lasting oxidative stress of Abeta42. In contrast, the S-oxidized radical cation of Abeta40 is too short-lived to induce potent neurotoxicity because no such stabilization of radicals occurs in Abeta40.