PHOTOSENSITIVITY OF CERIC ION INITIATED ACRYLAMIDE POLYMERIZATION

Polymerization of acrylamide initiated by ceric ammonium nitrate alone has been studied in aqueous medium. The effects of UV light irradiation on the initial rates of polymerization, the activation energy and on the polymer molecular weights have been investigated. Compared with that in the dark, the rate of polymerization under UV light was accelerated to eleven times higher, and the overall activation energy was lowered markedly.     

THE POLYMERIZATION OF d-ELEOSTEARIC ACID IN THE DIPALMITOYLPHOSPHATIDYLCHOLINE-α-ELEOSTEARIC ACID LIPOSOME*

The polymerization of α-eleostearic acid (α-ESA) in the dipalmitoylphosphatidylcholine (DPPC)-α-ESA liposome was studied. The polymerization was carried out by UV irradiation and was kineticfirst order. The rate constant depends on the ratio of DPPC to α-ESA in the liposome. A transitionpoint of reaction rate could be observed in the course of the polymerization, and it appearedearlier with elevated temperature. Before the transition point, the higher the DPPC to α-ESAratio the higher was the reaction rate; while after the transition point, the higher the DPPC to α-ESAratio the lower wa the reaction rate.     

PHOTOSENSITIVITY OF CERIC ION INITIATED METHYL ACRYLATE POLYMERIZATION

The polymerization of methyl acrylate was sensitive to UV light.Under UV light,the rate of polymerization is 8 times as high as the ratein dark.The overall activation energy was decreased by the UV light(313nm).A tentative explanation is given and the mechanism is discussed.     

"CAGE" VANADYL POLYCARBOXYLATE-THIOUREA COMPLEX FOR THE POLYMERIZATION OF ACRYLONITRILE

The polymerization of acrylonitrile (AN) in aqueous nitric acid initiated by " cage " vanadyl polycarboxylate (P=VO)-thiourea (TU) complex was investigated. The overall rate ofpolymerization isThe relationship between the induction period (τ) and the temperature of polymerization as well as the concentrations of reactants can be expressed as follows :The molecular weight of polyacrylonitrile increases with increasing monomer concentration and decreases with increasing temperature of polymerization and concentrations of vanadyl polycarboxylate and thioureaThe polymerization mechanism was proposed and discussed.     

Photocatalytic oxidation of phenol in aqueous solutions with oxygen catalyzed by supported metallophthalocyanine catalyst

In this paper, zinc tetraaminophthalocyanine (Zn-APc) was immobilized on cellulosic fiber by covalent bond to obtain a novel cellulosic fiber supported metallophthalocyanine, named Zn-TDTAPc-F. At pH 11, upon visible light irradiation for 6 h in the presence of O2, Zn-TDTAPc-F was found to be highly effective for the degradation of phenol in aqueous solution, and the degradation rate of phenol was more than 95%. HPLC was used to confirm formic acid, fumaric acid and maleic acid as its main degradation products.     

KINETICS OF POLYMERIZATION OF ACRYLONITRILE INITIATED BY VANADIUM(V)-THIOUREA REDOX SYSTEM

The kinetics of polymerization of acrylonitrile (AN) initiated by quinquevalent vanadium (V~(5+))-thiourea (TU) redox system has been investigated in aqueous nitric acid in the temperature range from 30 to 50℃. The polymerization rate (R_p) can be expressed as follows: In the copolymerization of acryionitrile with methyl acrylate (MA), the reactivity ratios were found to be 1.0 and 1.1, respectively. The experimental observations suggest that the initiating species is probably a complex consisting of a central ion of Lewis acid-VO_2~+ and the ligands of Lewis bases-acrylonitrile, thiourea, and nitrate anions, while the initiating system in lower concentration, the polymerization of acrylonitrile does not occur if the thiourea is acidified prior to its reaction with quinquevalent vanadium. This indicates that the primary radicals (or the monomeric radicals in the present article) are produced by associated thiourea rather than isothlourea.     

STUDY ON THE EFFECT OF POLYSTYRENE SULFONIC ACID MACROMOLECULES ON THE POLYMERIZATION OF ACRYLAMIDE

The effect of polystyrene sulfonic acid (PSSA) macromolecules on the polymerization of acrylamide (AM) has been studied. It was found that the rates of polymerization of AM were greatly increased in the presence of PSSA in the polymerization system.The maximum value of the rate of polymerization of AM was obtained when the ratio of [—SO_3H]: [AM] reached 3:1. When the insoluble crosslinked PSSA was used instead of the soluble one, this effect decreased considerably. The interaction between molecules of PSSA and AM was determined by infrared spectroscopy, elementary analysis and X-ray photoelectron spectroscopy. The combination form, —SO_3-NH_3~ CO—, formed between sulfonic group and amide group was found to be existed since the infrared absorption band of —NH_2 shifted from 3400cm~(-1) to 3150 cm~(-1), the binding energy of electron N_(18) changed from 399.7 eV to 401.3 eV, and the atomic ratio of N to S of the products was similar to the ratio of reagents. Based on these experimental results, the mechanism of AM polymerization in the presence of PSSA is proposed. The initial step is the combination of AM with sulfonic group to form —CONH_3~ , then followed by polymerization on the PSSA macromolecule. The role of PSSA on the polymerization of AM is discussed.     

Mechanism study on the reactions between biphenyl and HNO_2 initiated by 355 nm irradiation in aqueous phase

The reactions taking place in the mixed solution of biphenyl and nitrous acid after it was exposed to UV irradiation were studied in this research work. The transient species were identified with the nanosec- ond transient spectroscopic technique, and the final products were ascertained by GC-MS analysis. It was shown that the OH radical, generated by the direct photolysis of nitrous acid, would attack biphe- nyl molecule to form Bp-OH adduct with a rate constant of 9.5×109 L·mol?1·s?1. The Bp-OH adduct could either react with H or be oxidized by nitrous acid to form nitrosobiphenol. The reactions between biphenyl and nitrous acid under UV irradiation in atmospheric aqueous phase were therefore sug- gested to be one promising source of nitrocompounds in the environment.     

Mechanism study on the reactions between biphenyl and HNO<Subscript>2</Subscript> initiated by 355 nm irradiation in aqueous phase

The reactions taking place in the mixed solution of biphenyl and nitrous acid after it was exposed to UV irradiation were studied in this research work. The transient species were identified with the nanosecond transient spectroscopic technique, and the final products were ascertained by GC-MS analysis. It was shown that the OH radical, generated by the direct photolysis of nitrous acid, would attack biphenyl molecule to form Bp-OH adduct with a rate constant of 9.5×109 L·mol-1·s-1. The Bp-OH adduct could either react with H or be oxidized by nitrous acid to form nitrosobiphenol. The reactions between biphenyl and nitrous acid under UV irradiation in atmospheric aqueous phase were therefore suggested to be one promising source of nitrocompounds in the environment.     

MECHANISM FOR THE INITIATION OF ACRYLONITRILE POLYMERIZATION BY POLYPROPYLENE-BASED POLYAMIDOXIME-THIOUREA COMBINATION

Polymerization of acrylonitrile (AN) in aqueous nitric acid initiated by polypropylene-based polyamidoxime (PPAO)-thiourea (TU) combination has been investigated. The overall rate of polymerization (R_p) under the conditions of [TU]/[PPAO]<0.5 molar ratio isThe molecular weights of the polymers were found to be inversely proportional to 3/2-power of nitric acid concentration and 1-power of thiourea concentration. In addition, it is independent with the concentrations of monomer and PPAO, and decreases with increasing temperature.On the basis of these experimental results, a coordination-proton transfer mechanism for the initiation was proposed and discussed.     

Kinetics and Mechanism of Oxidation of Lactic Acid by Dihydroxyditelluratoargentate（Ⅲ）in Alkaline Medium

The kinetics of the oxidation of lactic acid(Lac) by dihydroxyditelluratoargentate(Ⅲ）[abbreviated as DDA of Ag(Ⅲ）]anions was studied in an aqueous alkaline medium by conventional spectrophotometry in a temperature range of 25-40℃.The order of the redox reaction of lactic acid and DDA was found to be first-order.The rates increased with the increase in [OH^-]and decreased with the increase in [tellurate].No free radical was detected.In the view of this the dihydroxymonotelluratoargentate(Ⅲ）species(DMA) is assumed to be the active species.A plausible mechanism involving a two-electron transfer is proposed,and the rate equation derived from the mechanism can be used to explain all the experimenttal results.The activation parameters(25℃）and the rate constants of the rate-determining step along with the preequilibrium constants at different temperatures were evaluated.     

Iron-mediated AGET ATRP of styrene and methyl methacrylate using ascorbic acid sodium salt as reducing agent

Atom transfer radical polymerization of styrene(St) and methyl methacrylate(MMA) in bulk and in different solvents using activators generated by electron transfer(AGET ATRP) were investigated in the presence of a limited amount of air using FeCl3·6H2O as the catalyst, ascorbic acid sodium salt(AsAc-Na) as the reducing agent, and a cheap and commercially available tetrabutylammonium bromide(TBABr) as the ligand. It was found that polymerization in THF resulted in shorter induction period than that in bulk and in toluene for AGET ATRP of St, while referring to AGET ATRP of MMA, polymerization in THF showed three advantages compared with that in bulk and toluene: 1) shortening the induction period, 2) enhancing the polymerization rate and 3) having better controllability. The living features of the obtained polymers were verified by chain end analysis and chain-extension experiments.     

AROMATIC AND HETEROCYCLIC DINITRILES AND THEIR POLYMERS ⅪⅤ. STUDY ON THE CATALYSTS OF THE POLYMERIZATION OF AROMATIC NITRILES*

Various catalysts for the polymerization ot aromatic nitriles were investigated. It was found that Lewis acid-metal is a preferable catalyst system for the polymerization of aromatic nitriles, and the polymerization rate is about 10 times faster than Lewis acid alone. The polymerization rate of benzonitrile catalyzed by Lewis acid and different metals was measured, and the activity of metals was in the following decreasing order ,magnesium, zinc, sodium, calcium. Furthermore, the polymerization of benzonitrile catalyzed by different Lewis acid and zinc was also investigated.     

STRUCTURAL EFFECT ON VINYL POLYMERIZATION INITIATED WITH AROMATIC TERTIARY AMINE

The polymerization mechanism of various vinyl monomers in the presence of aromatic tertiary amines has been studied. It was found that the mechanisms of different monomers are varied with the structures of monomers. Those monomers, such as methacrylic esters containing α-CH_3 group on the double bond could be polymerized with aromatic tertiary amine in the absence of light, while the monomers without α-CH_3 group, such as methyl acrylate, acrylonitrile etc. would polymerize only under light.The structural effects, both of the monomer and the amine, on the rate of photopolymerization were studied. The activities of monomers and amines may be arranged in the following orderMonomer: AN>MA>VA>St Amine: DMT>DMA>DMB>DNAIt is revealed that both the electro-negative group on the double bond of monomer which acts as an acceptor and the electro-positive group on the nitrogen atom of amine which acts as a donor would effectively increase the rate of photopolymerization.     

SYNTHESIS AND PROPERTIES OF ACRYLIC-BASED SUPERABSORBENTS WITH ENHANCED CROSSLINKING ON PARTICLE SURFACE

A series of acrylic-based superabsorbent resins were synthesized by inverse suspension polymerization, using potassium persulfate as the initiator, N, N＇-methylene bisacrylamide （BIS） and divinylbenzene （DVB） as the multiple crosslinking agents. The morphology of the resulting superabsorbent resins revealed by SEM demonstrated that a hard shell layer was indeed formed due to surface crosslinking. The swelling and deswelling properties, and the mechanical strength of superabsorbents were investigated. The results indicated that the adding time of DVB and the amount of DVB participated in the crosslinking show a significant influence on the properties of superabsorbents. When DVB was added in polymerization later, the amount of DVB participated in reaction decreases and the surface crosslinked shell becomes thinner. It is suitable for DVB to be introduced in the later stage of the polymerization process, because the absorption rate of resin is efficiently improved in conjunction with higher water absorption. Furthermore, it was found that the mechanical strength of swollen superabsorbent with surface crosslinking was indeed enhanced in comparison with that of the conventional one.     

Characters of the Plateau of Methanol Increment in Frontal Analysis in Reversed Phase Liquid Chromatography

With insulin methanol-water,and the ion-pairing agent,hydrochloric acid and trifluroacetic acid(TEA),the character of the first plateau(FP)on the elution curve of frontal analysis in reversed phase liquid chromatography(RPLC)was investigated by on-line UV-spectrometry and identified with nuclear magnetic resonance(NMR) spectrometry and mass spectrometry.The profile of the FP is the same as that of a usual elution curve of methanol in frontal analysis(FA).When the insulin concentration was limited to a certain range,the height of the FP was found to be proportional to the insulin concentration in mobile phase and its length companying to shorten,The FP profile on the intersection of two tangents reflects the components of the microstructure in the depth direction of the bonded stationary phase layer and the desorption dynamics of the displaced components.The displaced methanol was quantitatively determined by NMR and on-line UV spectrometries.TFA with high UV absorbance can not be used as an ionpairing agent for the investigation of the FP in RPLC,but if can be used as a good marker to investigate the complicated transfer process of components in the stationary phase in RPLC.A stoichiometric displacement process between solute and solvent was proved to be valid in both usual and FA in RPLC.From the point of view of dynamics of mass transfer, the solutes can only contact to the surface of stationary phase in usual RPLC,while solute can penetrate into it in FA of RPLC.The solvation of insulin in methanol and water solution as an example indicating the usage of the FP in the FA was also investigated in this paper.     

Influence and Characterization of Acidity on Fine Silicon Powder Immobilized Photocatalyst

TiO2 photocatalyst was supported with tetrabutyl titanate sol as precursor and fine silicon powder obtained from ferroalloys factory as carder to discuss the influence of pH value of gel precursor on microstructure and activity of photocatalyst in the process of synthesizing nano-TiO2 by using sol-gel method, the purpose of which is to provide fundamental data for the recycle of photocatalytic material. Under the irradiation of ultraviolet light, the photocatalytic degradation rate of methyl orange solution was used to characterize the photocatalytic activity of the sample. The specific surface area of the sample was tested by N2 desorption method, crystal form of TiO2 was analyzed by X-ray powder diffraction, and the microtopography of the sample was observed by scanning electron microscopy. The experimental results showed that the acidity of gel precursor could greatly affect the specific surface area and photocatalytic activity of the photocatalyst, and the optimum pH value of the precursor was determined as 2.0, and at this time the specific surface area of photocatalyst could reach 34.0 m^2/g. In the sample, the proporticn of anatase to rutile is 7：3, which makes l0 mg·L^-1 methyl orange solution fade after irradiation by 15W ultraviolet light for 24 h, and the degradation rate might be up to 98.1%.     

Partition of initiators in quasi-static precipitation polymerization of AAm/MAc

In order to investigate the partition of initiators for quasi-static precipitation polymerization of acrylamide(AAm) and methacrylic acid(MAc) in ethanol, azo-initiators were employed with various functional groups such as ―COOCH3(V-601, dimethyl 2,2′-azobis(isobutyrate)), ― CN(V-65, 2,2′-Azobis(2,4-diemthylvaleronitrile)), ― COOH(V-501, 4,4′-azobis(4-cyanovaleric acid)) and ―NH-(VA-061, 2,2′-azobis[2-(2-imidazolin-2-yl)propane]), respectively. Particle size, induction time and kinetics of polymerization were investigated by the scanning electron microscopy(SEM) and gravimetry. It was observed that the polymerization parameters, such as the particle size, induction time and polymerization rate, were considerably affected by the functional groups of initiators. Besides, the monomer concentration also played important roles in the particle formation. By using V-601, the polymerization rate was strongly correlated with the total surface area of particles and the concentration of initiators. However, by using V-501, the polymerization rate was strongly related to W0 Ci,0, where W0 is the initial concentration of monomers and Ci,0, the initial concentration of initiators. The results indicated that the different functional groups determined the different partition types of initiators between the minimonomer droplets and the continuous phase due to the molecular interactions of initiator and monomers. V-601 was all partitioned in the continuous phase, but a part of V-65 was partitioned in the minimonomer droplets. Besides the V-501 dissolved in the continuous phase, a part of V-501 was adsorbed on the surface of minimonomer droplets. VA-061 destroyed the stability of minimonomer droplets by the formation of zwitterions with MAA.     

FT-RAMAN SPECTROSCOPY FOR MONITORING THE POLYMERIZATION OF ACRYLIC ACID IN AQUEOUS SOLUTION

FT-Raman spectroscopy was used to monitor the polymerization of acrylic acid in aqueoussolution. A simple method to avoid the noise in the background during the signal processing via Fouriertransformation was used in this work. The effects of the amount of initiator used on the polymerization arestudied. When the amount of the initiator in the polymerization was increased, both the rate and extent ofpolymerization of acrylic acid will be increased.     

Photo-grafting Poly(acrylic acid) onto Poly(lactic acid) Chains in Solution

Poly(lactic acid)(PLA)is one of the most important bio-plastics,and chemical modification of the already-polymerized poly(lactic acid)chains may enable optimization of its material properties and expand its application areas.In this study,we demonstrated that poly(lactic acid)can be readily dissolved in acrylic acid at room temperature,and acrylic acid can be graft-polymerized onto poly(lactic acid)chains in solution with the help of photoinitiator benzophenone under 254 nm ultraviolet(UV)irradiation.Similar photo-grafting polymerization of acrylic acid(PAA)has only been studied before in the surface modification of polymer films.The graft ratio could be controlled by various reaction parameters,including irradiation time,benzophenone content,and monomer/polymer ratios.This photo-grafting reaction resulted in high graft ratio(graft ratio PAA/PLA up to 180%)without formation of homopolymers of acrylic acid.When the PAA/PLA graft ratio was higher than 100%,the resulting PLA-g-PAA polymer was found dispersible in water.The pros and cons of the photo-grafting reaction were also discussed.