Immunoaffinity extraction of testosterone by antibody immobilized monolithic capillary with on-line laser-induced fluorescence detection

An immunoaffinity capillary column has been made with poly (2-vinyl-4, 4-dimethylazlactone-co-2-hydroxyethyl methacrylate-co-ethylene dimethacrylate) (VDA-co-HEMA-co-EDMA) monolith as a support for the immobilized antibody. The monolith is prepared by UV-initiated in situ polymerization, followed by immobilizing anti-testosterone polyclonal antibody through the rapid reaction with VDA. Fluorescence labeled testosterone at C₃ is designed as a tracer to estimate the extraction ability of this immunoaffinity column, and to optimize the immunoextraction process, such as washing, eluting, incubation and injection. The performance in a more realistic application is then demonstrated successfully for the rapid extraction of testosterone (T) by competitive immunoassay and on-line laser-induced fluorescence (LIF) detection. This immunoaffinity monolith is easily prepared, with high mechanical strength and low flow resistance. It is a satisfactory material as an immunoextractor to detect small molecular compounds specifically and rapidly with high sensitivity (sub ng/mL level).     

Use of magnetic beads with immobilized monoclonal antibodies for isolation of highly pure plasma membranes

In plasma membrane proteome research, contamination of the isolated plasma membrane fraction with proteins from other organelles is still a problem. Even if highly specific isolation methods are used, such as density gradient centrifugation combined with selective extraction, contaminating proteins cannot be completely removed. To solve this problem, a protocol for the isolation of highly pure plasma membrane fractions from rat liver and two different hepatocellular carcinoma cell lines was developed. Magnetic beads with immobilized mAb's against highly expressed membrane proteins were used for specific binding of membrane vesicles and their separation from other organelles. Isolated plasma membranes were further selectively solubilized with different reagents and analyzed by use of different methods, such as Western blotting, 1- and 2-DE, and MS. Purification and further selective solubilization was validated by use of mAb's against the marker integral plasma membrane protein carcinoembryonic antigen cell adhesion molecule 1, and identification of isolated proteins by MS. The method presented here minimizes contamination with other organelles and enables further identification of membrane proteins.     

Sorption properties of cellulose filters with covalently immobilized thiosemicarbazide

A novel thin-layer cellulose adsorbent bearing chemically immobilized thiosemicarbaside is synthesized. The adsorbent is used for the preconcentration of cobalt(II), mercury(II), and cadmium(II) followed by their X-ray fluorescence quantification in the concentrate. The physicochemical parameters of metal sorption are determined.     

Direct isolation of monoclonal antibodies from tissue culture supernatant using the cation-exchange cellulose Express-Ion S

The chromatography of the murine hybridoma cell C595/102 culture supernatant expressing the therapeutic monoclonal antibody C595, on the cation-exchange cellulose Whatman Express-Ion Exchanger S has been investigated. Initial method scouting studies using purified C595 in 1-ml mini columns demonstrated that binding capacity and binding efficiency were dependent not only on decreasing pH but also on the buffer salts used to prepare the mobile phase. Under optimised conditions of 0.1 M sodium acetate buffer, pH 5.0, we were able to separate purified C595 from BSA, the major contaminant in tissue culture fluid. Under these conditions immunoreactive C595 could be isolated directly from tissue culture supernatant. A scale-down study was carried out using a 25-ml column operated at a flow-rate of 150 cm/h which also yielded purified immunoreactive antibody. This procedure should now be suitable for scale-up.     

In vitro evaluation of cellulose acetate hemodialyzer immobilized with heparin

In this study, heparin was immobilized onto cellulose acetate hollow fibers to improve the anticoagulation performance during hemodialysis. In vitro evaluation was carried out using mini‐hemodialyzer circulating with fresh porcine whole blood to simulate kidney therapy. The dialysis performance and hemocompatibility were estimated. The results showed that heparinized hemodialyzer could be used through out the whole dialysis time (4 hr) without injecting additional heparin to prevent coagulation in the dialysis system. In addition, the hemocompatibility was evaluated by measuring activated partial thromboplastin time (APTT), prothrombin time (PT), and fibrinogen time (FT). The complete blood count (CBC) including red blood cell (RBC), hemoglobin (Hgb), hematocrit (Hct), white blood cell (WBC), and platelet were determined. The results showed that heparinization could keep the CBC stable during dialysis, whereas unmodified cellulose acetate hemodialyzer would cause a decrease in RBC unless heparin was injected during dialysis. Heparinized hemodialyzer showed longer APTT, PT, and FT than unmodified hemodialyzer. Heparinized hemodialyzer also showed slightly higher clearance than unmodified hemodialyzer. These results indicated that the dialysis performance and hemocompatibility of cellulose acetate hemodialyzer could be improved by the immobilization of heparin. Copyright © 2006 John Wiley & Sons, Ltd.     

复合纤维素固定化脲酶对铜离子的吸附作用

脲酶对重金属离子极为敏感。由复合纤维素（CC）固定化脲酸对铜离子的吸附现象得出的结论是：脲酶吸附的Cu~(2+)总量与其活性没有定量关系，而是与固酶重量成比例。从而可以认为，重金属离子不是直接作用于脲酶活性部位使其中毒的，很可能是作用于脲酶大分子其他部位，使分子构象变形后导致脲酶失活的。由于CC固酶对Cu~(2+)有吸附作用，且又不污染系统，所以可用其除去食品、药物及水中的Cu~(2+)离子。     

An immunoradiometric assay for human follicle stimulating hormone using a monoclonal antibody coupled to magnetisable cellulose

A simple immunoradiometric assay for human follicle stimulating hormone (hFSH) was developed using a pair of monoclonal antibodies obtained from commercial sources. The system developed makes use of a capture antibody covalently coupled to magnetisable cellulose, which is a more economical and stable immunosorbent as compared to the other solid phases. The detector antibody is labeled with¹²⁵I using the chloramine-T oxidation method and purified by gel filtration. After initial cross-matching of the capture and detector antibodies, various assay parameters have been optimised. This assay does not show any significant cross reactivity with homologous hormones. A number of serum samples from men and women from reproductive age group was screened and compared with another commercially available kit (r=0.98). Sensitivity of the assay is 1.4 mIU/ml, interassay variation is <5% and intraassay variation around 15%. The assay is reproducible and sensitive enough for regular estimation of serum hFSH and is relatively inexpensive.     

Immunoaffinity carrier prepared by immobilization of antibody via Co3+-chelate

A method for the immobilization of antibodies to inert matrix represents an important factor that affects results of immunoaffinity chromatography. Binding antibodies to immobilized metal ions is an example of oriented immobilization that avoids a random coupling of a protein. Preparation of a stable immunoaffinity sorbent using immobilized metal ions was described. Antibodies were bound to chelated Co3+ ions that were prepared by oxidation of Co2+-iminodiacetic acid agarose using hydrogen peroxide. The formation of a stable complex of the antibody with immobilized Co3+ ions was proved. Antibodies bound by this way were not released with solutions of 50 mM EDTA, 6 M urea, 3 M NaCl, 20% v/v dioxane, 0.1 M imidazole and buffers of pH 2.5 and pH 11.0. If needed, antibody could be released from the carrier by the reduction of Co3+ ions with a reducing agent (e.g. dithiotreitol or 2-mercaptoethanol). Antibody released from the carrier could be then replaced by another antibody. The method described in this paper was used for the immobilization of polyclonal rabbit anti-ovalbumin antibody or egg yolk antibody (IgY) produced in chicken. In a model experiment, immobilized polyclonal rabbit antibodies were used for the separation of ovalbumin from egg white and conditions of chromatography were described.     

Solid-phase fluorescence determination of gallium(III) with morin and lumogallion immobilized on cellulose matrices

It has been demonstrated that the fluorometric test determination of gallium(III) can be performed with morin and lumogallion immobilized on thin-layer cellulose matrices. Test procedures have been developed for the determination of Ga(III) in the range 0.5–90 mg/L by the length of fluorescence zone on a test strip sealed into a polymer film (after its contact with the test solution) in the ranges 0.001–1 and 0.01–1 mg/L with the visual detection of the fluorescence of the indicator matrix with morin and lumogallion, respectively (after passing 100 and 20 mL of a test solution through it), and in the range 0.0001–0.1 mg/L by detecting the fluorescence with a portable fluorimeter.     

Test determination of molybdenum(VI) with the use of phenylfluorone immobilized on a cellulose cloth

It was demonstrated that phenylfluorone immobilized on a cellulose cloth matrix can be used as a reagent for the test determination of molybdenum(VI). Phenylfluorone was immobilized on a mixed fiber cloth (viscose with cotton), which provides high retention of the reagent (97%) and exhibits chemical stability and mechanical strength. The selectivity of the reaction was studied. A test procedure was developed for the determination of 0.05–5 mg/L molybdenum(VI) in natural waters (RSD < 40%); the time of analysis is 10–15 min.     

Direct spectrophotometric determination of proteins immobilized on bead cellulose and dissolved in cadoxene

A direct spectrophotometric method has been developed for the determination of the amount of proteins immobilized on bead cellulose. The method is based on dissolution of conjugates in cadmium tris(ethylenediamine) hydroxide (trivial name, cadoxene) that is optically transparent in the region of the UV spectrum in which proteins absorb. The method developed for the determination of immobilized proteins is simple, rapid, and readily reproducible. The sensitivity of the method is dependent on theA _1cm ^1% value of the free protein and on the amount of bound proteinm (mg protein/g carrier). In the terms ofA _1cm ^1% ≥25 andm≥120 mg/g, the sensitivity of the mentioned method was comparable with those obtained by amino acids analyses by the ninhydrin reaction, by the modified Lowry reaction, or by radiometric determination. The possibility of substituting the direct spectrophotometric method for amino acid analysis was statistically evaluated; it does not seem to be rejected at the highest level of significance,P≤1%. The differences in paired observations were significant, but nonetheless proportional over the whole range of protein concentrations, making both methods correlable. The absolute accuracy of the direct spectrophotometric method could be influenced by the change ofA _1cm ^1% value during solvolysis of the conjugate in cadoxene.     

Adsorption of monoclonal antibody variants on analytical cation-exchange resin

Monoclonal antibody (MAb) variants differing by one or two C-terminal lysine residues can be separated by cation-exchange chromatography due to the difference in their charge distribution. The adsorption of the three MAb variants on a weak cation-exchange resin was characterized using directly the raw mixture in spite of the presence of some impurities. The effects of both, pH and eluent salt concentration, on the adsorption isotherm were investigated. Under certain experimental conditions distorted peak shapes and even peak doubling for single variant injections were obtained, in addition to unexpectedly long retention times. These observations were explained based on equilibrium theory. The separation of the MAb variants was designed for an isocratic and a linear salt gradient operation. The corresponding optimal values of pH and salt concentration were determined. The use of salt gradients not only allows reducing the process time and increasing enrichment of the variants, but also leads to some loss in purity. A baseline separation could be obtained under isocratic and strongly adsorbing conditions at pH 6.3. A lumped kinetic model and a procedure for estimating the corresponding parameters were developed and validated by comparison with experimental elution chromatograms in a wide range of operating conditions.     

Properties of human parotid amylase immobilized by covalent binding to glass or sepharose or by reaction with immobilized antibody

Human parotid amylase was immobilized by covalent binding to CNBr-activated Sepharose, to Corning GAO-3940 silica glass biomaterial support by the diazonium reaction or reaction with glutaraldehyde, or as a result of the antigen-antibody reaction between rabbit antihuman parotid amylase IgG that was covalently bonded to GAO glass and soluble amylase. The amylase directly bonded to the supports showed constant activity at flow rates of 3-15 ml/min through a 1.76-cm³ (8-mm diameter) support bed, did not lose enzyme into a circulating starch solution, retained its activity in the presence of soluble antiamylase IgG, was optimally active at 35°-40°C, and lost activity at 40°-45°C. When the enzyme was bound by interaction with immobilized antibody, full activity was expressed, but some enzyme was solubilized by a circulating starch solution. Immobilization of either amylase or antiamylase IgG makes dissolution of the antigen-antibody bond difficult.     

Catalytic activity of lipase immobilized onto ultrathin films of cellulose esters

Ultrathin (approximately 2.0 nm) films of cellulose acetate (CA), cellulose acetate propionate (CAP), and cellulose acetate butyrate (CAB) supported on Si wafers have been prepared by adsorption and characterized by means of ellipsometry, atomic force microscopy (AFM), and contact angle measurements. CA, CAP, and CAB ultrathin films were characterized in air just after their formation and after annealing under reduced pressure at temperature higher than the corresponding melt temperature. Upon annealing, CA, CAP, and CAB ultrathin films became smoother and more hydrophobic, evidencing molecular reorientation at the solid-air interface. CA, CAP, and CAB films were used as supports for the immobilization of lipase. The adsorption of lipase onto annealed films was more pronounced than that onto untreated films, showing the strong affinity of lipase for the more hydrophobic substrates. Enzymatic activity was evaluated by a standard procedure, namely, (spectrophotometric) measurement of p-nitrophenol, the product formed from the hydrolysis of p-nitrophenyl dodecanoate (p-NPD). Lipase immobilized onto hydrophobic films exhibited higher activity than that of free lipase and could be recycled three times while retaining relatively high activity (loss of ca. 30% of original enzymatic activity). The effect of storing time on the activity of immobilized lipase was studied. Compared with free lipase, that immobilized onto more hydrophobic films retained 70% activity after 1 month. More importantly, the latter level of activity is similar to that of free lipase. However, lipase immobilized onto more hydrophilic films retained 50% and 30% activity after 20 and 30 days, respectively. These results are explained in terms of surface wettability and the contribution of the interactions between the polar residues of lipase and the glucopyranosyl moieties of cellulose ester to maintain the natural conformation of immobilized enzyme.     

Affinity of the monoclonal antibody M1 directed against the FLAG peptide.

The FLAG (Sigma, St. Louis, MO, USA) peptide is a frequently used hydrophilic and immunogenic fusion tag which was specifically designed to facilitate rapid purification by immunoaffinity chromatography. The monoclonal antibody M1 recognizes the free N-terminus of the peptide tag in a calcium dependent manner. Dissociation of the complex can be performed by the addition of chelating agents such as EDTA. This effect can be exploited for immunoaffinity purification of FLAG-tagged fusion proteins. Kinetic information obtained from monitoring interactions in real-time measurement (Biacore 2000) using surface plasmon resonance as detection principle did not show any difference for association and dissociation rate constants in the presence (k(a) = 3.03 x 10(3) M(-1) k(d) = 1.25 x 10(-3) s(-1)) and in the absence of Ca2+ (k(a) = 3.59 x 10(3) M(-1) s(-1), k(d) = 1.16 x 10(-3) s(-1)). These findings corroborate the reports from Mol. Immunol. 33 (1996) 601-608 describing similar binding analyzed by enzyme-linked immunosorbent assay experiments. These investigations are in contrast to the observations in immunoaffinity chromatography with immobilized anti-FLAG antibody M1.     

Interaction analysis of the carcinoembryonic antigen (CEA) with its monoclonal antibody immobilized on a gold surface using Fourier transform infrared reflection-absorption spectroscopy (FT-IR RAS).

A monoclonal antibody for the carcinoembryonic antigen (CEA) was immobilized on a gold chip surface covered by a self-assembled monolayer of 11-mercaptoundecanoic acid. Upon the addition of CEA, a Fourier transform infrared reflection-absorption spectroscopy (FT-IR RAS) measurement showed an increased absorption at around 1500 - 1700 cm(-1), corresponding to its amide structures. Another addition of CEA polyclonal antibody on this chip caused a further increase of the absorption in this region only after a treatment with CEA. This result shows that an antibody-fixed gold surface coupled with an FT-IR RAS measurement provides a new tool for detecting the antibody-antigen interaction.     

2,3,7-Trihydroxyfluorones immobilized on cellulose matrices in test methods for determining rare elements

It was shown that 2,3,7-trihydroxyfluorones immobilized by adsorption on cellulose matrices can be used as reagents for the test determination of Mo(VI), Ti(IV), Ge(IV), Hf(IV), Nb(V), Ta(V), W(VI), Bi(III), V(IV), and Zr(IV). The change of the protolytic and complexing properties of trihydroxyfluorones immobilized on cellulose matrices was considered in comparison to corresponding properties in a solution. It was found that the reactions of trihydroxyfluorones with rare elements on cellulose matrices and in a solution exhibit similar effects upon the addition of cetylpyridinium. These effects are the bathochromic shift of the absorption maxima of the reagents and their complexes with analytes and the extension of the range of optimum acidity for complex formation. The complexation of salicylfluorones with the titanium(IV) in solution and on cellulose paper was studied by IR spectrometry. Phenylfluorone immobilized on a mixed-fiber cloth as used in test determinations of (mg/L) 0.05–5 Ti(IV), V(IV), Hf(IV), Nb(V), and Mo(VI); 0.01–5 Ge(IV) and Zr(IV); 0.05–1 Bi(III) and W(VI); and 0.1–5 Ta(V) by the color intensity of the indicator matrix after passing through 20 mL of a test solution. It was shown that phenylfluorone immobilized on cellulose paper can be used to determine (mg/L) 0.05–50 Ti(IV), 0.5–1000 Ge(IV), 0.5–500 Zr(IV), 5–200 Bi(III), 0.1–50 Mo(VI), 0.1–1000 V(IV), 0.1–100 Nb(V), 0.1–800 Hf(IV), 1–100 Ta(V), and 1–800 W(VI) by the length of the colored zone of a test strip after it was brought into contact with a test solution.     

UV-induced graft polymerization of acrylamide on cellulose by using immobilized benzophenone as a photo-initiator

Photo-active moiety, benzophenone, was incorporated onto cotton fabrics by using butyl tetracarboxylic acids (BTCA). Then, grafting of polyacrylamide on the cotton fabrics was performed by exposing the fabrics to longer UV wavelength irradiation. The chemical structure and thermal properties of the polyacrylamide grafted cotton fabrics were investigated by SEM, FTIR, XRD, and TGA, and the results verified the successful grafting of polyacrylamide on cotton fabrics. Also, it was observed that active chlorine contents were created on the polyacrylamide grafted cotton fabrics through simple chlorination process, and the chlorine treated cotton fabrics showed excellent antibacterial abilities like the powerful cyclic amide halamines.     

New role of antibody in bacterial isolation

To eliminate the interference caused by Pseudomonas aeruginosa in the isolation of Salmonella, a rabbit polyclonal antibody against P. aeruginosa was prepared by inoculating four New Zealand rabbits with the pathogen. The antiserum was purified using saturated ammonium sulfate and added into Rappaport-Vassiliadis medium with soya (RVS) broth and Muller-Kauffmann tetrathionate novobiocin broth (MKTTn broth) to evaluate whether it could inhibit the growth of P. aeruginosa. Observations by scanning electron microscopy demonstrated that P. aeruginosa was attacked and destroyed by the antibody when incubated for 10 min at 37 degrees C. The activity of the antibody was also effective against 11 other strains of P. aeruginosa. Twenty-six strains of Salmonella were mixed with P. aeruginosa in RVS and MKTTn broth at 37 degrees C for 12 h, respectively, and the cultures were plated on Salmonella chromogenic medium (SCM; Oxoid, Basingstoke, UK). Only Salmonella grew on SCM; five colonies were randomly selected for identification by VITEK 2 (bioMérieux, Lyon, France). Additionally, when mixed with two strains of Enterobacter cloacae (ATCC 700323 and YG001), the prepared antibody did not affect the growth of E. cloacae. The results demonstrated that the microbicidal activity of the antibody did not affect the tested Salmonella sp. or E. cloacae strains. Therefore, the antibody generated could be used to increase the accuracy of Salmonella isolation.