Electrospun poly(ethylene oxide)/chitosan nanofibers with cellulose nanocrystals as support for cell culture of 3T3 fibroblasts

Chitosan/poly(ethylene oxide) (PEO) (5:1) nanofibers with cellulose nanocrystals (CNCs) were produced using an electrospinning technique. The addition of CNCs to the chitosan/PEO solutions allowed the production of uniform fibers (without beads) with a high proportion of chitosan. The fiber diameters were influenced by the concentration of CNCs in the chitosan/PEO solutions. The solutions containing 10% (w/w) of CNCs produced thinner fibers compared to solutions containing 5% (w/w) of CNCs. Thermogravimetric analysis indicated that the nanofibers were thermally stable, despite the CNCs having an effect on the PEO decomposition. Results from the cell assay in cultures of 3T3 fibroblasts indicated that the chitosan/PEO nanofibers (with 10% CNCs) promoted cell attachment with changes in the cytoskeletal organization. The results obtained in this work highlight the favorable effect of CNCs in electrospinning of chitosan/PEO. As expected, the influence of nanofibers on 3T3 fibroblasts F-actin and β-tubulin network revealed alterations in cytoskeleton, leading to changes in cell morphology and spreading.     

Bacterial adhesion-resistant poly(2-hydroxyethyl methacrylate) derivative for mammalian cell cultures

In an attempting to find new biomaterials for mammalian cell culture, PHEMA derivatives with ester side groups are synthesized by one-step polymer-analogous reaction. These polymers show excellent antifouling properties against S. epidermidis and P. aeruginosa while their cytotoxicity and proliferation activity for HDF cell are on a similar level as commercially available TCPS. The interesting bioadhesion property is systematically correlated with surface properties of the PHEMA derivatives.     

自组装短肽GFS-2构建新型三维细胞培养支架材料

典型的自组装短肽在水中可形成稳定的β-sheet二级结构,在生理性环境下则能够形成稳定的纳米纤维,可进一步形成含水量达99%的水凝胶,具有高纯度、可降解及无免疫反应等突出优点,能模拟生物体内的三维基质环境而作为细胞三维培养的新型生物材料。本文主要采用了圆二色谱仪、原子力显微镜、倒置显微镜等探究新型短肽GFS-2的自组装性能及其在细胞三维培养中的应用。此研究可能会启发设计更多的新型自组装短肽服务于化学、生物材料、医学工程等领域。     

Bacterial cellulose/poly(ethylene glycol) composite: characterization and first evaluation of biocompatibility

Bacterial cellulose (BC)/poly(ethylene glycol) (PEG) composite was prepared by immersing wet BC pellicle in PEG aqueous solution followed by freeze-drying process. The product looks like a foam structure. The morphology of BC/PEG composite was examined by scanning electron microscope (SEM) and compared with pristine BC. SEM images showed that PEG molecules was not only coated on the BC fibrils surface but also penetrated into BC fiber networks. It has very well interconnected porous network structure and large aspect surface. The composite was also characterized by Fourier transform infrared spectrum, X-ray diffraction, thermogravimetric analysis (TGA) and tensile test. It was found that the presence of PEG affected the preferential orientation of the (1[`1]0 1bar{1}0 ) plane during the drying process of BC pellicle, which in turn decrease the crystallinity of dried BC. The TGA result showed that the thermal stability was improved from 263 to 293 °C, which might be associated with strong interaction between BC and PEG. Tensile test results indicate that the Young’s modulus and tensile strength tend to decrease. Biocompatibility of composite was preliminarily evaluated by cell adhesion studies using 3T3 fibroblast cells. The cells incubated with BC/PEG scaffolds for 48 h were capable of forming cell adhesion and proliferation, which showed much better biocompatibility than the pure BC. The prepared BC/PEG scaffolds can be used for wound dressing or tissue-engineering scaffolds.     

Fabricating gradient hydrogel scaffolds for 3D cell culture

Optimizing cell-material interactions is critical for maximizing regeneration in tissue engineering. Combinatorial and high-throughput (CHT) methods can be used to systematically screen tissue scaffolds to identify optimal biomaterial properties. Previous CHT platforms in tissue engineering have involved a two-dimensional (2D) cell culture format where cells were cultured on material surfaces. However, these platforms are inadequate to predict cellular response in a three-dimensional (3D) tissue scaffold. We have developed a simple CHT platform to screen cell-material interactions in 3D culture format that can be applied to screen hydrogel scaffolds. Herein we provide detailed instructions on a method to prepare gradients in elastic modulus of photopolymerizable hydrogels.     

Plasma-induced graft copolymerization of poly(methacrylic acid) on electrospun poly(vinylidene fluoride) nanofiber membrane

Electrospun nanofibrous membranes (ENM) which have a porous structure have a huge potential for various liquid filtration applications. In this paper, we explore the viability of using plasma-induced graft copolymerization to reduce the pore sizes of ENMs. Poly(vinylidene) fluoride (PVDF) was electrospun to produce a nonwoven membrane, comprised of nanofibers with diameters in the range of 200-600 nm. The surface of the ENM was exposed to argon plasma and subsequently graft-copolymerized with methacrylic acid. The effect of plasma exposure time on grafting was studied for both the ENM and a commercial hydrophobic PVDF (HVHP) membrane. The grafting density was quantitatively measured with toluidine blue-O. The degree of grafting increased steeply with an increase in plasma exposure time for the ENM, attaining a maximum of 180 nmol/mg after 120 s of plasma treatment. However, the increase in the grafting density on the surface of the HVHP membrane was not as drastic, reaching a plateau of 65 nmol/mg after 60 s. The liquid entry permeation of water dropped extensively for both membranes, indicating a change in surface properties. Field emission scanning electron microscopy micrographs revealed an alteration in the surface pore structure for both membranes after grafting. Bubble point measurements of the ENM reduced from 3.6 to 0.9 um after grafting. The pore-size distribution obtained using the capillary flow porometer for the grafted ENM revealed that it had a similar profile to that of a commercial hydrophilic commercial PVDF (HVLP) membrane. More significantly, water filtration studies revealed that the grafted ENM had a better flux throughput than the HVLP membrane. This suggests that ENMs can be successfully engineered through surface modification to achieve smaller pores while retaining their high flux performance.     

Synthesis and characterization of cellulose fibers grafted with hyperbranched poly(3-methyl-3-oxetanemethanol)

Hyperbranched poly(3-methyl-3-oxetanemethanol) (HBPO) was directly grafted from the surface of cellulose fibers (CF) through a surface hydroxyl group-initiated ring-opening polymerization of 3-methyl-3-oxetanemethanol (MOM). TOF–SIMS, XPS, AFM, ATR-FTIR, and TGA were utilized for characterizing the resultant HBPO-grafted cellulose fibers. The content of grafted HBPO is easily adjustable by controlling feeding dosage of the MOM. To verify the reactivity of hydroxyl groups in the grafted HBPO, poly(ε-caprolactone) (PCL) was further grafted from the HBPO-grafted cellulose surface.     

Influence of microcrystalline cellulose fiber (MCCF) on the morphology of poly(3-hydroxybutyrate) (PHB)

Biopolymer composites were prepared from poly(3-hydroxybutyrate) (PHB)/microcrystalline cellulose fiber (MCCF)/plastiziers/poly(vinyl acetate) by melt extrusion. The morphology, crystal structure, and non-isothermal crystallization of these composites were investigated by polarized optical microscopy (POM), differential scanning calorimetry, Fourier transform infrared spectrometer, and wide-angle X-ray diffraction. The results of DSC indicate that the addition of small amount of MCCF improved the crystallization rate. Non-isothermal crystallization shows that the composites 1 and 2 have lower crystallization half time (t _{0 .5}) than that of pure PHB. Higher MCCF contents in PHB (composite 4) lead to a decrease in the crystallization rate. POM micrographs show that the MCCF were well dispersed in the PHB matrix and served as a nucleating agent with a strong change in PHB morphology. Increasing the isothermal crystallization temperature above 120 °C, leads to the formation of banded spherulites with large regular band spacing. Decreasing the isothermal crystallization temperature below 100 °C produces more and small spherulites.     

Blends of poly(ethylene terephthalate) and cellulose

Poly(ethylene terephthalate) (PET) (intrinsic viscosity 0.59) and cellulose (Whatman) are compatible in up to 7.5% (w/v) solutions in trifluoroacetic acid and in mixtures of trifluoroacetic acid and methylene chloride. Evaporation of the solutions yielded films that did not contain cellulose per se, but rather partial esters of cellulose and trifluoroacetic acid. Clear films were cast from these solutions with compositions of 100/0, 75/25, 50/50, 25/75, and 0/100 PET. cellulose (w/w). Infrared spectra and DSC measurements indicate specific polymer-polymer interaction although two T_g were observed. Hydrolysis of the trifluoroacetate films to blends of PET and regenerated cellulose was accomplished by suspending the films in water at the boil. Infrared spectra indicate no interaction between the two polymers, although the films of the 50/50 and 25/75 PET. cellulose compositions were clear. The 25/75 composition, from its T_g and melting-point behavior appears to be a dispersion of very small-particle PET in a cellulose matrix. The 75/25 composition became opalescent during the hydrolysis and may be a dispersion of large-particle cellulose in a PET matrix. The regenerated cellulose appears to be a mixture of cellulose II and IV polymorphs.     

Characterization of poly(methyl methacrylate) nanofiber mats by electrospinning process

In this study, the aim is to describe the influence of electrospinning parameters on the morphology, the water wetting property and dye adsorption property of poly(methyl methacrylate) nanofiber mats. Specifically, the effects of solution concentration, solvent type, applied voltage, distance between the electrodes and particulate reinforcement on the diameter and shape of the nanofibers were investigated. All poly(methyl methacrylate) nanofiber mats contained beaded nanofiber structures. With increasing the polymer solution concentration, the average fiber diameter also increased. Poly(methyl methacrylate) nanofiber mat electrospun from dimethylformamide solution resulted in thicker fibers when compared with the mat electrospun from acetone solution. Increasing the electric potential difference between the collector and the syringe tip did not increase the average fiber diameter. Besides increasing the distance between the electrodes resulted in a decrease in the average fiber diameter. When compared with PMMA nanofiber mat, thicker fibers were obtained with silica nanoparticles reinforced nanofiber mat. According to the water contact angle measurements, all poly(methyl methacrylate) nanofiber mats revealed hydrophobic surface property. PMMA nanofiber mat with the highest water contact angle gave rise to the highest dye adsorption capacity.     

Poly(propylene carbonate)/poly(3‐hydroxybutyrate)‐based bionanocomposites reinforced with cellulose nanocrystal for potential application as a packaging material

Poly(propylene carbonate) (PPC) is an aliphatic polycarbonate synthesized from carbon dioxide and propylene oxide. Poly(3‐hydroxybutyrate) (PHB) is a type of thermoplastic polyester produced by biological fermentation. The blending of PHB with PPC can effectively enhance the mechanical properties and barrier properties of PPC. Bionanocomposites of PPC/PHB enhanced by cellulose nanocrystal (CNC) are prepared via a two‐step process using polyethylene glycol as a carrier. Results show that the oxygen barrier properties of the composites increased with the increase of the CNC content. When the CNC content is 1 wt%, the oxygen barrier performance increases nearly 18 times. The assumed model can predict the barrier performance of composites with the combined influence of morphology and CNC distribution. This will make PPC/PHB/CNC nanocomposites a very promising degradable material for food packaging application.     

The influence of grafted cellulose nanofibers and postextrusion annealing treatment on selected properties of poly(lactic acid) filaments for 3D printing

l ‐lactide monomers were grafted onto cellulose nanofibers (CNFs) via ring‐opening polymerization, forming poly(lactic acid) grafted cellulose nanofibers (PLA‐g‐CNFs). PLA‐g‐CNFs and pristine PLA were then blended in chloroform and dried to prepare a master batch. PLA‐g‐CNFs/PLA composite filaments targeted for 3D printing were produced by compounding the master batch in PLA matrix and melt extrusion. The as‐extruded composite filaments were subsequently thermal annealed in a conventional oven, and their morphological, thermal, and mechanical properties were evaluated. PLA was successfully grafted on the surface of CNFs as demonstrated by elemental analysis, and the concentration of grafted PLA was estimated to be 33 wt %. The grafted PLA were highly crystallized, contributing to the growth of crystalline regions of PLA matrix. The incorporation of PLA‐g‐CNFs improved storage modulus of the composite filaments in both low temperature glassy state and high temperature rubbery state. Postextrusion annealing treatment led to 28 and 63% increases for tensile modulus and strength of the filaments, respectively. Simulated Young's moduli from the Halpin‐Tsai and Krenchel models were found comparable with the experimental values. The formed composite filaments are suitable for use in 3D printing. © 2017 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2017 , 55, 847–855     

Thermoresponsive poly(poly(ethylene glycol) methylacrylate)s grafted cellulose nanocrystals through SI-ATRP polymerization

We report a series of thermoresponsive cellulose nanocrystals (CNCs) decorated with poly(poly(ethylene glycol) methylacrylate) copolymers (poly(PEGMA)-g-CNCs) synthesized by surface initiated-atom transfer radical polymerization (SI-ATRP). The chemical structures and surface morphologies were subsequently confirmed by FT-IR, XPS, and AFM measurements. With regard to thermally responsive behavior, poly(PEGMA)-g-CNCs show tunable lower critical solution temperature (LCST) values in the range of 34–66 °C by varying the feeding ratios of comonomers. The reversible morphological transformation from individual nano-rod structures to larger globule aggregates was further verified by AFM during the LCST transition. These functionalized CNCs have potential as smart film filters and biosensors.     

A concept for miniaturized 3-D cell culture using an extracellular matrix gel

This paper presents a novel method to embed, anchor, and cultivate cells in a controlled 3-D flow-through microenvironment. This is realized using an etched silicon pillar flow chamber filled with extracellular matrix (ECM) gel mixed with cells. At 4 degrees C, while in liquid form, ECM gel is mixed with cells and injected into the chamber. Raising the temperature to 37 degrees C results in a gel, with cells embedded. The silicon pillars both stabilize and increase the surface to volume ratio of the gel. During polymerization the gel shrinks, thus creating channels, which enables perfusion through the chip. The pillars increase the mechanical stability of the gel permitting high surface flow rates without surface modifications. Within the structure cells were still viable and proliferating after 6 days of cultivation. Our method thus makes it possible to perform medium- to long-term cultivation of cells in a controlled 3-D environment. This concept opens possibilities to perform studies of cells in a more physiological environment compared to traditional 2-D cultures on flat substrates.     

The conformation of poly(3-dodecyl thiophene) within methacrylic polymer matrix

Blends of poly(3-dodecyl thiophene) (PDDT) with poly(methyl methacrylate), poly(butyl methacrylate) (PBMA), and poly(methyl methacrylate-co-butyl methacrylate) (PMMA/PBMA) were studied by polarization optical microscopy, atomic-force microscopy, and absorption spectroscopy and were modeled using molecular dynamics (MD) simulations. The observed thermochromic transitions are shown to be host-matrix dependent, with PDDT/PBMA absorption spectra differing substantially from pristine PDDT. The dispersion of PDDT within PBMA matrix is observed to be greater than in the other host polymers. MD calculations of both individual PDDT molecules and molecular aggregates suggest that the distribution of dihedral angles present in the PDDT backbone is the narrowest for aggregates of PDDT embedded within a polymer matrix. © 1999 John Wiley & Sons, Inc. J Polym Sci B: Polym Phys 37: 2909–2917, 1999     

Biodegradation of plasticized poly(vinyl chloride) containing cellulose

The plasticized poly(vinyl chloride) (PVC‐P) and its blend with cellulose (PVC‐P/cell) were prepared by means of extrusion. The samples were then biodegraded in forest soil as well as in soil enriched with cellulolytic microorganisms. Moreover, the samples were vaccinated with chosen species of fungi whose direct effect on polymer was then observed. The course of biodegradation was monitored in terms of, and by means of the following: weight loss, carbon dioxide evolved, attenuated total reflectance infrared (FTIR‐ATR) spectroscopy, gel permeation chromatography (GPC), as well as visual and microscopic observation (OM, SEM). The mechanical properties of samples were studied using the standard tensile tests. It was found that biodegradation in soil occurs in PVC‐P and this process is accelerated in the composition of PVC‐P with cellulose. The biodecomposition yield of PVC‐P/cellulose blends (calculated as relative percentage weight loss) is several dozen times higher than that of PVC‐P. © 2007 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 45: 903–919, 2007     

Preparation and Properties of Poly（vinyl alcohol）/Chitosan Blend Bio-nanocomposites Reinforced by Cellulose Nanocrystals

The aim of this paper is to report the effect of the addition of cellulose nanocrystals（CNCs） on the mechanical, thermal and barrier properties of poly（vinyl alcohol）/chitosan（PVA/Cs） bio-nanocomposites films prepared through the solvent casting process. The characterizations of PVA/Cs/CNCs films were carried out in terms of X-ray diffraction（XRD）, transmission electron microscopy（TEM）, scanning electron microscopy（SEM）, thermogravimetric analysis（TGA and DTG）, oxygen transmission rate（OTR）, and tensile tests. TEM and SEM results showed that at low loading levels, CNCs were dispersed homogenously in the PVA/Cs matrix. The tensile strength and modulus in films increased from 55.1 MPa to 98.4 MPa and from 395 MPa to 690 MPa respectively, when CNCs content went from 0 wt% to 1.0 wt%. The thermal stability and oxygen barrier properties of PVA/Cs matrix were best enhanced at 1.0 wt% of CNCs loading. The enhanced properties attained by incorporating CNCs can be beneficial in various applications.     

3D FT-IR imaging spectroscopy of phase-separation in a poly(3-hydroxybutyrate)/poly(l-lactic acid) blend

In the present study, 3D FT-IR spectroscopic imaging measurements were applied to study the phase separation of a poly(3-hydroxybutyrate) (PHB)/poly(l-lactic acid) (PLA) (50:50 wt.%) polymer blend film. While in 2D projection imaging the z-dependent information is overlapped, thereby complicating the analysis, FT-IR spectro-micro-tomography, obtained from computed tomographic back projection calculations, results in distinct 3D chemical images that provide detailed information of phase separation of the two polymer components that are well separated.