Mechanical and shape‐memory properties of poly(mannitol sebacate)/cellulose nanocrystal nanocomposites

Polyesters based on polyols and sebacic acid, known as poly(polyol sebacate)s (PPS), are attracting considerable attention, as their properties are potentially useful in the context of soft‐tissue engineering applications. To overcome the drawback that PPSs generally display rather low strength and stiffness, we have pursued the preparation of nanocomposites based poly(mannitol sebacate) (PMS), a prominent example of this materials family, with cellulose nanocrystals (CNCs). Nanocomposites were achieved in a two‐step process. A soluble, low‐molecular‐weight PMS pre‐polymer was formed via the polycondensation reaction between sebacic acid and D‐mannitol. Nanocomposites with different CNC content were prepared by solution‐casting and curing under vacuum using two different profiles designed to prepare materials with low and high degree of crosslinking. The as‐prepared nanocomposites have higher stiffness and toughness than the neat PMS matrix while maintaining a high elongation at break. A highly crosslinked nanocomposite with a CNC content of 5 wt % displays a sixfold increase in Young's modulus and a fivefold improvement in toughness. Nanocomposites also exhibit a shape memory effect with a switch temperature in the range of 15 to 45 °C; in particular the materials with a thermal transition in the upper part of this range are potentially useful for biomedical applications. © 2014 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2014 , 52, 3123–3133     

Dynamic postpolymerization of 3D‐printed photopolymer nanocomposites: Effect of cellulose nanocrystal and postcure temperature

Cellulose nanocrystal (CNC) reinforced methacrylate (MA) resin nanocomposite was prepared by 3D stereolithography printing. A postcure process, where the printed nanocomposite was heat‐treated under different temperatures, was applied to improve the property of the printed nanocomposites. To investigate the effect of CNC and postcure temperature on the kinetic behavior of the postpolymerization of printed nanocomposites, Fourier‐transform infrared spectroscopy and differential scanning calorimetry measurement of the printed nanocomposites before and after postcure were analyzed. The postpolymerization of MA nanocomposites was promoted at a postcure temperature of 140 °C for the printed 0.5% CNC/MA nanocomposites compared to the printed MA resin. The addition of CNC retarded the polymerization of MA resin during 3D printing, resulting in poorer mechanical properties of the printed nanocomposites compared to the printed MA resin. However, after postcure, the mechanical properties of the printed nanocomposites were improved by the postpolymerization of the MA nanocomposites. © 2018 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2018 , 56, 935–946     

Synthesis and properties of cellulose nanocrystal conjugates with reactive dyes

Cellulose - In this work, we have developed methods of synthesis of cellulose nanocrystal (CNC) conjugates with chlorotriazine reactive dyes (RDs)—reactive violet, reactive-bright red and...     

Transcrystallization of polypropylene at cellulose nanocrystal surfaces

There is a resurgence of interest in composite materials incorporating cellulose as fibrous reinforcement in semicrystalline melt-processed polymers. Potential natural cellulose sources range from flax and ramie fibres down to whiskers and nanocrystals isolated from bacteria. It has long been known that the crystallization of matrix polymers such as polypropylene may be preferentially nucleated by Cellulose I surfaces, leading to a “transcrystalline” layer around the fiber. In this note, a transcrystalline layer at the edge of films cast from cellulose nanocrystal suspensions is demonstrated, and preferential nucleation of polypropylene on nanocrystals deposited on a glass surface is also observed.     

Gelation of cellulose nanocrystal suspensions in glycerol

Aqueous suspensions of cellulose nanocrystals (NCC) produced by sulfuric acid hydrolysis of natural cellulose fibres display a number of unique properties. In addition to forming equilibrium chiral nematic phases above some critical concentration, cellulose nanocrystal suspensions tend to gel or aggregate if the stability of the suspension decreases, for example because of a decrease in the surface charge density of sulfate ester groups, or a change in the properties of the suspending medium. Direct incorporation of unmodified nanocrystals into organic media usually leads to aggregation. We have found that it is possible to circumvent this difficulty and form clear thixotropic gels of unmodified NCC in glycerol, by careful evaporation of water from aqueous glycerol suspensions of NCC. The physical gels form at a fairly low (<3 wt%) concentrations of cellulose. The initial composition of the suspension, the temperature and rate of evaporation, and the time resting at room temperature all influence the formation of thixotropic gels. Desulfation of the acid-form nanocrystals, enhanced in the glycerol-rich suspensions, is shown to be a key step in this gelation process.     

TEMPO-mediated oxidation of microcrystalline cellulose: limiting factors for cellulose nanocrystal yield

Cellulose nanocrystal (CNC) production suffers, among other problems, from low yields. The focus of this study was to investigate the universal effect of charge density, centrifugation, and mechanical treatment as limiting causes of yield. Microcrystalline cellulose (MCC) was used as the starting material in order to eliminate the relatively arbitrary yield losses caused by the hydrolysis conditions. To disintegrate MCC into nanocrystals, high surface charge in the form of carboxylic groups was introduced by TEMPO-mediated oxidation, after which the material was mechanically treated, and separated into fine and coarse fractions. The fine fraction collected as supernatant after separation by centrifugation had a yield of 17–20% independent of the mechanical treatment method or time used. The particle sizes of these fractions did not significantly differ from each other, which raises questions on the efficiency of the mechanical treatment (sonication) and centrifugation in traditional CNC production. The results imply that radically new approaches in preparation are needed for truly meaningful increases in the CNC yield.     

Efficient alternative of antimicrobial nanocomposites based on cellulose acetate/Cu-NPs

The current research presents an efficient, cheap, and safe antimicrobial material for widespread use based on copper nanoparticles (Cu-NPs) loaded on cellulose acetate (CA) matrix. A reduction process of CuSO₄·5H₂O has been performed to prepare Cu-NPs. The nanosized copper particles included oxidized Cu (15–20 nm). Two different loads of Cu-NPs were used in this study, 2% and 6% mol.%. The presence of Cu-NPs incorporated with CA films slightly affected the tensile index of the films, where low and high-loaded Cu-NPs enhanced the tensile index by small values ranged from 0.640 to 0.650 and 0.667, respectively. A study on the antibacterial activity of these nanocomposites was carried out for Staphylococcus aureus, Pseudomonas aeruginosa, and Candida albicans. It has been found that CA containing Cu-NPs (2%) exhibited the highest antimicrobial activity against all test microbes including S. aeureus (21 mm), P. aeruginosa (18 mm), C. albicans (19 mm), and Aspergillus niger (15 mm). Results also revealed that CA film with 6% exhibited lower activity than film with 2% Cu-NPs. The morphological properties of CA/Cu-NPs films were characterized by scanning electron microscopy and transmission electron microscope in addition to X-ray diffraction. Low-loaded Cu-NPs showed homogenous distribution through CA matrix while, the high-loaded Cu-NPs were agglomerated through CA matrix. Thermal properties illustrated the enhancement of thermal stability of the film with increasing the loaded Cu-NPs.     

Surface modification of cellulose nanocrystal with chitosan oligosaccharide for drug delivery applications

A novel drug delivery system based on two of the most abundant natural biopolymers was developed by modifying the surface of oxidized cellulose nanocrystal (CNC) with chitosan oligosaccharide (CS_OS). First, the primary alcohol moieties of CNC were selectively oxidized to carboxyl groups using the 2,2,6,6-tetramethylpiperidine-1-oxyl radical catalyst. The amino groups of CS_OS were then reacted with carboxylic acid groups on oxidized CNC (CNC-OX) via the carbodiimide reaction using N-hydroxysuccinimide and 1-ethyl-3-(3-dimethylaminopropyl)-carbodiimide as coupling agents. Successful grafting of CS_OS to CNC-OX was confirmed by infrared spectroscopy, thermogravimetry, potentiometric titration, and zeta potential measurements. The grafting resulted in a conversion of ~90 % carboxyl groups on CNC-OX and the degree of substitution was 0.26. CNC–CS_OS nanoparticles showed a binding efficiency of 21.5 % and a drug loading of 14 % w/w. A drug selective electrode was used to directly measure the concentration of procaine hydrochloride released from CNC–CS_OS particles. The in vitro drug release was studied at pH 8 and the nanoparticles revealed a fast release of up to 1 h, which can be used as biocompatible and biodegradable drug carriers for transdermal delivery applications.     

Poly(N-vinylcaprolactam) nanocomposites containing nanocrystalline cellulose: a green approach to thermoresponsive hydrogels

In this work, we report on the synthesis and characterization of thermoresponsive poly(N-vinylcaprolactam), PNVCL, nanocomposite hydrogels containing nanocrystalline cellulose (CNC) by the use of frontal polymerization technique, which is a convenient, easy and low energy-consuming method of macromolecular synthesis. CNC was obtained by acid hydrolysis of commercial microcrystalline cellulose and dispersed in dimethylsulfoxide. The dispersion was characterized by TEM analysis and mixed with suitable amounts of N-vinylcaprolactam for the synthesis of PNVCL nanocomposite hydrogels having a CNC concentration ranging between 0.20 and 2.0 wt%. The nanocomposite hydrogels were analyzed by SEM and their swelling and rheological features were investigated. It was found that CNC decreases the swelling ratio even at small concentration. The rheological properties of the hydrogels indicated that CNC strongly influenced the viscoelastic modulus, even at concentrations as low as 0.1 wt%: both G′ and G″, and the viscosity increase with CNC content, indicating that the nanocellulose has a great potential to reinforce PNVCL polymer hydrogels.     

Functionalization of cellulose nanocrystal powder by non-thermal atmospheric-pressure plasmas

Cellulose - Despite promising characteristics such as the biodegradability and the environmentally benign nature of cellulose nanocrystal (CNC) based composites, their poor dispersion and...     

Viscoelastic characteristics of plasticized cellulose nanocomposites

The plasticization effects of cellulose diacetate composite systems including nanoparticles (montmorillonite, MMT) and plasticizers(diethyl phthalate, DEP) were investigated by the time–temperature superposition technique and viscoelastic modeling. Exhibiting the highest modulus value in the glass state, the viscoelastic modulus of the MMT nanocomposite rapidly decreased above the glass‐transition temperature (T_g). The Arrhenius‐type activation energy of pristine cellulose acetate showed the lowest value of activation energy and both DEP‐plasticized and MMT‐reinforced systems exhibited increased values of activation energy. Although the free volume fraction at the T_g decreased with the plasticizer content, it increased with the incorporation of MMT, seemingly preventing the polymer chains from being arranged in an ordered structure. © 2004 Wiley Periodicals, Inc. J Polym Sci Part B: Polym Phys 43: 59–65, 2005     

Physicomechanical properties of nanocomposites based on cellulose nanofibre and natural rubber latex

Cellulose nanofibres (CNF) with diameter 10–60 nm were isolated from raw banana fibres by steam explosion process. These CNF were used as reinforcing elements in natural rubber (NR) latex along with cross linking agents to prepare nanocomposite films. The effect of CNF loading on the mechanical and dynamic mechanical (DMA) properties of NR/CNF nanocomposite was studied. The morphological, crystallographic and spectroscopic changes were also analyzed. Significant improvement of Young’s modulus and tensile strength was observed as a result of addition of CNF to the rubber matrix especially at higher CNF loading. DMA showed a change in the storage modulus of the rubber matrix upon addition of CNF which proves the reinforcing effect of CNF in the NR latex. A mechanism is suggested for the introduction of the Zn–cellulose complex and its three dimensional network as a result of the reaction between the cellulose and the Zinc metal which is originated during the composite formation.     

Advanced binderless board-like green nanocomposites from undebarked cotton stalks and mechanism of self-bonding

Self-bonding of air-dried undebarked cotton stalks during hot pressing in a closely fitting mold was studied. Advanced board-like green nanocomposites from ground undebarked cotton stalks were introduced for the first time in the present work. The dry forming process was adopted. Moderate molding pressure and temperature were selected and applied in a tight die, thus saving water and energy and avoiding the use of any binders to achieve an environment-friendly green product. Green nanocomposites having densities in the range of 1.27–1.29 g/cm³ and 1.03–1.06 g/cm³ were prepared. Particle size and cell wall morphological structure were found to play a major role in self-bonding. Properties of composites prepared from the fine fraction of cotton stalks were superior to those prepared from the cotton stalk coarse fraction at the same conditions. This is attributed—among other things—to the dominance of pith (parenchymal cells) in the fine fraction. Such cells possess a high lumen-to-cell wall ratio, which renders them more deformable under pressure, leading to more intercellular or interparticle bonding. Advanced binderless green nanocomposites having bending strength as high as 637 kg/cm² and water absorption as low as 12.1 % were obtained from the ground undebarked cotton stalks. The results show clearly that the advanced green nanocomposite obtained by the dry forming process, without the addition of any binders, is superior to hardboard obtained from cotton stalks by the conventional wet web formation process. The mechanism of self-bonding is discussed.     

Degradation of wood cellulose with Lewis acids with the aim to prepare powder cellulose

The influence of various factors on degradation of wood cellulose with Lewis acids was studied. The physicochemical characteristics of the resulting products were analyzed.     

Superabsorbent hydrogel nanocomposites based on starch-g-poly(sodium acrylate) matrix filled with cellulose nanowhiskers

Superabsorbents hydrogel nanocomposites based on starch-g-poly(sodium acrylate) and cellulose nanowhiskers (CNWs) were synthesized. A set of experiments was performed to evaluate the influence of some factors such as NaAc/starch mass ratio, crosslinker, and nanowhiskers amount in the swelling capacity and swelling kinetics. Increasing the NaAc/starch mass ratio up to 7 leads to an increase in the water uptake at a maximum value, however, higher ratios decreased that value due to the increase of crosslinking points. Similarly, the incorporation of CNWs up to 10 wt% provided an improvement in the swelling due to the hydrophilic groups from cellobiose units. Further, the incorporation of CNWs diminishes the water uptake. Besides, the CNWs improved the mechanical properties. SEM images showed that CNWs increase the average porous size of composites. The composites presented good responsive behavior in relation to pH and salt presence allowing those materials suitable for many potential applications.     

“Green polyethylene” and curauá cellulose nanocrystal based nanocomposites: Effect of vegetable oils as coupling agent and processing technique

Cellulose nanocrystals (CNC) were prepared from curauá fibers via acid hydrolysis, and used as reinforcing phase for high‐density biopolyethylene (HDBPE) or green polyethylene. Castor oil (CO), epoxidized soybean oil (ESO) and epoxidized linseed oil (ELO) were chosen as compatibilizers for this study. Nanocomposites reinforced with CNC (3, 6, and 9 wt %) were processed by extrusion, using CO (3, 6, and 9 wt %) to evaluate its action as CNC dispersing agent in the HDBPE matrix. From the results obtained for these films, the CNC and oil contents were set at 3 wt%. In addition to CO, ELO, and ESO were also used, and besides processing by extrusion, extrusion/hot‐pressing process was also considered, in order to compare the two processing techniques. The nanocomposites were characterized by microscopic, thermal, mechanical, and rheological analyses. The presence of oil leads to less opaque films and improved dispersion. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 1010–1019     

Green all-cellulose nanocomposites made with cellulose nanofibers reinforced in dissolved cellulose matrix without heat treatment

Green all-cellulose nanocomposites were fabricated by adding reinforcing cellulose nanofiber (CNF) to a matrix of dissolved cellulose. CNFs were isolated from one dried native hardwood bleached Kraft pulp and office waste recycled deinked copy/printing paper (DIP) by using the TEMPO oxidation method. The cellulose was dissolved by using DIP and DMAc/LiCl solvent without heat treatment and solvent exchange to form a matrix of the all-cellulose nanocomposites. The DIP was not only selected for CNF isolation, but also for the cellulose matrix. The isolated CNFs and the all-cellulose nanocomposites were characterized by atomic force microscopy, thermogravimetry–differential thermal analysis, X-ray diffraction and mechanical tensile testing. The green all-cellulose nanocomposites made without heat treatment offered better thermal stability, crystallinity and mechanical properties than the heat treated ones. CNFs isolated from two resources show similar reinforcement capacity in all-cellulose nanocomposites. All-cellulose nanocomposite fabrication by dissolving cellulose without heat treatment and solvent exchange is a simple way that saves energy and chemicals.     

Hydrophobic modification of cellulose nanocrystal via covalently grafting of castor oil

Hydrophobic cellulose nanocrystals (CNs) have been prepared by grafting isocyanate-terminated castor oil, a kind of natural vegetable oil, onto their surface. The existence of castor oil component in the modified cellulose nanocrystals was verified by Fourier transform infrared spectroscopy, solid-state ¹³C NMR spectra and X-ray photoelectron spectroscopy. At the same time, X-ray diffraction and transmission electron micrographs further proved that the crystalline structure and large aspect ratio of cellulose nanocrystals were essentially preserved after chemical grafting. Furthermore, the surface of modified cellulose nanocrystals appeared to be hydrophobic as indicated by contact angle measurements. The value of the polar component of surface energy decreased from 21.5 mJ/m² to almost zero via grafting castor oil. These novel hydrophobic castor oil-grafted cellulose nanocrystals appear as valuable alternatives to formulate bionanocomposites with non-polar polymers for optimized performances.