Covalent attachment of lysozyme to cotton/cellulose materials: protein verses solid support activation

Covalent attachment of enzymes to cellulosic materials like cotton is of interest where either release or loss of enzyme activity over time needs to be avoided. The covalent attachment of an enzyme to a cellulosic substrate requires either activation of a protein side chain or an organic functional group on the cellulosic substrate. Use of a water soluble carbodiimide to create an amide linkage as the covalent attachment between the enzyme and substrate represents an aqueous-based alternative which may be preferred for textile processes. Here we describe an amide bond-mediated lysozyme immobilization applied to cotton where either the carboxylate side chains of the protein or pendant carboxylates in a citrate, cross-linked cotton support are activated as the O-acyl-isourea intermediate, and the reactive amino nucleophiles are derived from amino-silanized cotton and the protein’s amino side chains, respectively. A comparison is made of the two activation approaches to covalently link lysozyme to two different cotton fabrics using the water soluble carbodiimide 1-cyclohexyl-3-(2-morpholinoethyl)-carbodiimide-metho-p-toluene sulfonate. A comparison of the resulting enzyme activities of lysozyme on two different cotton supports showed that linking lysozyme to citrate crosslinked cotton gave higher activity than on aminosilanized cotton. The lysozyme-cellulose conjugate formed on the citrate crosslinked nonwoven cotton fabric gave the highest yield and antimicrobial activity.     

Improved UV stability of antibacterial coatings with N-halamine/TiO2

The outstanding advantages of N-halamine materials over other antimicrobial materials are their durable and rechargeable antimicrobial properties, as well as their efficacies in inactivating a broad spectrum of pathogens. Theoretically, the oxidative chlorine of antimicrobial cotton coated with N-halamine hydantoin diol can be restored upon loss of its biocidal efficacy after exposure to ultraviolet light. In this work nano-titania particles were added into the coating solutions containing N-halamine diol and 1,2,3,4-butanetetracarboxylic acid (BTCA), and the coatings were applied to produce antimicrobial cellulose with improved UV stability. The treated cotton fabrics were characterized by FT-IR, SEM, XRD, and XPS. The effects of the coatings on tensile strength and wrinkle recovery angle were investigated. Biocidal efficacies of fabrics coated with hydantoin diol and diol/TiO₂ against Staphylococcus aureus (ATCC 6538) and Escherichia coli O157:H7 (ATCC 43895) were determined using a modified AATCC 100-1999 method and showed excellent antimicrobial properties against these two bacterial species within a brief contact times. It was found that the addition of Nano-TiO₂ in the antimicrobial coatings, especially rutile titanium dioxide, could improve the UV light stability of the chlorinated fabrics coated with hydantoin diol significantly. The UV light stability of N-halamine coatings were enhanced with increasing amounts of rutile TiO₂.     

Immobilization of lysozyme-cellulose amide-linked conjugates on cellulose I and II cotton nanocrystalline preparations

Lysozyme was attached through an amide linkage between some of the protein’s aspartate and glutamate residues to amino-glycine-cellulose, which was prepared by esterification of glycine to preparations of cotton nanocrystals. The nanocrystalline preparations were produced through acid hydrolysis and mechanical breakage of the cotton fibers from a scoured and bleached cotton fabric and a scoured and bleached, mercerized fabric, which was shown to produce cellulose I (NCI) and cellulose II (NCII) crystals respectively. A carbodiimide-activation coupling reaction was used to create the lysozyme-amino-glycine-cellulose conjugates using both NCI and NCII in a polar solvent and gave yields of covalently linked lysozyme at 604 mg/gram of cotton nanocrystal. The incorporation of lysozyme conjugated to the NCI and NCII preparations gave very high activity (1,500 U/mg cotton) when assessed using a fluorescence tag assay to measure antimicrobial activity against Micrococcus lysodeikticus. Scanning electron micrographs demonstrated an aggregation of nanoparticles corresponding to lysozyme bound on the surface of larger cotton nanocrystalline sheets. The approach of producing high enzyme activity on cotton nanocrystals is discussed in the context of selectively presenting robust hydrolase activity on nanocrystalline surfaces.     

The antimicrobial activity of the cotton fabric grafted with an amino-terminated hyperbranched polymer

An amino-terminated hyperbranched polymer (HBP-NH₂) was grafted to cotton fabric by a reaction between the aldehyde groups of oxidized cotton fabric and the amino groups of the HBP-NH₂ to provide cotton fabric with durable antimicrobial properties. The antimicrobial activities of the HBP-NH₂ aqueous solutions and the HBP-NH₂ grafted cotton fabrics were evaluated quantitatively against Staphylococcus aureus (S. aureus) and Escherichia coli (E. coli). The results indicated that the HBP-NH₂ grafted cotton fabric showed 92% of bacterial reduction to S. aureus and 95% of bacterial reduction to E. coli, respectively. The antimicrobial activities of the HBP-NH₂ grafted cotton fabrics were maintained at over 91% reduction level even after being exposed to 20 consecutive home laundering conditions. Several influence factors, which may affect the amount of HBP-NH₂ grafted onto the cotton fabrics, were also discussed.     

Antimicrobial activity of hydrophobic cotton coated with N‐halamine

γ‐(β‐Hydroxy‐γ‐5,5‐dimethylhydatoin)‐propyltriethoxysilane, a N‐halamine precursor, was synthesized with 3‐aminopropyltriethoxysilane and 3‐glycidyl‐5,5‐dimethylhydantoin. The N‐halamine precursor was tethered to the cotton fabric through ether linkages. The treated fabrics can be rendered excellent antimicrobial activity through a bleaching process. It can inactivate 100% of the Staphylococcus aureus and Escherichia coli O157:H7 with a contact time of 10 min and 30 min, respectively. Over 30% of the chlorine could be regained after the equivalent of 50 machine washes and rechlorination. The coatings resulted in a significant increase of hydrophobicity of cotton samples. In addition, the wrinkle recovery angle of the treated fabrics increased to some degree. Copyright © 2014 John Wiley & Sons, Ltd.     

Antibiotic protected silver nanoparticles for microbicidal cotton

Surface coating of metal nanoparticles is one of the major aspects to be optimized in the design of antimicrobial nanoparticles. The novelty of this work is that antimicrobial derivatives have been used as stabilizers to protect silver nanoparticles (Ag NPs). Microbicidal activity studies of fabricated cotton textiles coated with these Ag@Antibio were performed. Protective ligand layers of Ag NPs resulted to be a deterministic factor in their antimicrobial activity. The best bactericidal activity was obtained for Fabric TAM (coated with Ag NPs with triarylmethane derivates in surface, Ag@TAMSH), with a bacterial decrease of 3 log units for the S. aureus strain. Intrinsic antibiotic activity and partial positive charge of the TAMSH probably enhanced their antimicrobial effects. Fabric Eu (coated with Ag NPs with eugenol derivates in surface, Ag@EugenolSH) and Fabric FQPEG (coated with Ag NPs embedded in PEG-fluoroquinolone derivatives in surface, Ag@FQPEG) displayed antibacterial activity for both Staphylococcus aureus and Pseudomonas aeruginosa strains. These coated antimicrobial cotton fabrics can be applied in different medical textiles.     

Multifunctional water and oil repellent and antimicrobial properties of finished cotton: influence of sol–gel finishing procedure

Cotton fabric was treated with two-component water- and oil-repellent antimicrobial coatings consisting of the commercial aqueous organic–inorganic hybrid precursors fluoroalkyl-functional siloxane (FAS) and 3-(trimethoxysilyl)-propyldimethyloctadecyl ammonium chloride (SiQAC) of different concentrations. Two different application procedures were used: a one-step treatment (S1) by a sol mixture consisting of both precursors [coating FAS-SiQAC (S1)] and a two-step treatment (S2) by SiQAC sol and then FAS sol [coating SiQAC + FAS (S2)]. The functional properties of the coatings were determined from liquid contact angle measurements and antimicrobial activity, as well as FTIR and XPS analyses. Although both treatments gave the cotton fabric superhydrophobic and oleophobic properties at a sufficient sol concentration, procedure S1 was found to be more effective than procedure S2. The antibacterial properties of the SiQAC + FAS (S2) coating were superior to those of the FAS-SiQAC (S1) coating. For both two-component coatings, the active bacteriostatic activity of SiQAC was enhanced by the passive antibacterial activity of FAS. Two-component coatings did not provide significant antifungal protection. Repetitive washing gradually deteriorated both coatings but the coating applied by procedure S2 seemed to be slightly more durable than that applied by S1. The two-component coatings caused an increase in the flexibility and a slight decrease in the fabric breaking strength and air permeability of the cotton sample.     

Preparation and characterization of flame‐retardant lamellar Mg(OH)2 thin films on citric acid‐treated cotton fabrics

Preparation and characterization of lamellar magnesium hydroxide (Mg(OH)₂) thin films on cotton fabrics are reported in this paper. Mercerized cotton fabrics were treated with citric acid, so carboxyl groups were introduced to the surface of the fabrics. Mg(OH)₂ seeds were first adsorbed on the citric acid‐treated cotton fabrics and then Mg(OH)₂ thin films grew on the fabric through secondary growth method. Kinetics and isotherm studies found that the adsorption of Mg(OH)₂ seeds on citric acid‐treated cotton fabrics followed pseudo second‐order kinetic model and Langmuir isotherm. This indicated that Mg(OH)₂ seeds adsorption was monolayer chemical adsorption driven by electric attraction between positively charged Mg(OH)₂ seeds and ? COO^? ions on the cotton fiber surface. The X‐ray diffraction (XRD) and SEM characterizations of the Mg(OH)₂ thin films covered cotton fabrics found that standing flaky Mg(OH)₂ crystals formed a shell of porous but continuous network on cotton fabric surface. Owing to the Mg(OH)₂ thin film covering, the fabric had fireproof property, lower thermal conductivity and higher optical absorbance in the UV, Vis and IR regions. Copyright © 2010 John Wiley & Sons, Ltd.     

Antibacterial cotton fabric prepared by a “grafting to” strategy using a QAC copolymer

Quaternary ammonium compounds (QACs) have outstanding antimicrobial effect, but covalent immobilization of plentiful QAC onto cotton fiber surface to realize a durable function remains a challenge. Herein, a quaternary ammonium monomer, [2-(methacryloyloxy) ethyl] trimethylammonium chloride (DMC) was co-polymerized with methyl acrylate (MA) to prepare an antibacterial copolymer, poly(DMC-co-MA). To graft the copolymer with an improved grafting efficiency, cotton fabric was treated using carboxymethyl chitosan (CMC) to establish an amino-functionalized fiber surface first. This treatment allows the amidation reactions between the amino groups and the pendant ester groups in the poly(DMC-co-MA) to take place, achieving a durable anionic polymer coating onto the fiber surfaces with remarkably antibacterial effect. Characterization results indicated that when DMC/MA monomer ratio was 100:1, the resulting copolymer endows the modified cotton fabric with antibacterial capability that inactivates all Escherichia coli (E. coli) and Staphylococcus aureus (S. aureus). Even after 50 laundering cycles, more than 98.0% of the antibacterial rate could still be retained. Moreover, the wearing comfort properties such as softness, water absorption and air permeability of the finishing cotton fabrics have been insignificantly changed by comparing to the untreated cotton fabric.

     

Effect of hybrid phosphorus-doped silica thin films produced by sol-gel method on the thermal behavior of cotton fabrics

The aim of this work was to prepare hybrid organic-inorganic silica thin films to provide cotton fabrics with flame retardant properties and to investigate the films’ influence on the thermal and burning behavior of the treated samples. The fabrics were modified with three different sols in order to study the effect of pure silica sol-gel precursor, γ-aminopropyltriethoxysilane (APTES), and that of the hybrid sols consisting of the APTES and the phosphorus compound diethylphosphite. Furthermore, in order to improve the cross-linking degree and the phosphorus-nitrogen synergistic effect on flame retardancy of the P-doped silica thin film the melamine-based resin was added in the third sol. To evaluate the chemical structure of the coating material, pure xerogels of the treatment solutions were applied to glass slides and tested by ATR FT-IR spectroscopy. The cotton fabrics were impregnated with the sols by a padding-squeezing process and then dried. Thermal behavior of the treated cotton samples was investigated by thermogravimetric/differential scanning calorimetry analysis (TGA-DTG/DSC) and compared to the untreated one. The flame retardancy was tested according to the ASTM D 1230 standard method. The results showed a substantial enhancement of char-forming properties and flame retardancy for the fabrics modified with the thin films.     

Using graphene/TiO2 nanocomposite as a new route for preparation of electroconductive,self-cleaning,antibacterial and antifungal cotton fabric without toxicity

A novel and efficient process is reported for fabrication of electroconductive, self-cleaning, antibacterial and antifungal cellulose textiles using a graphene/titanium dioxide nanocomposite. Cotton fabric was loaded with graphene oxide using a simple dipping coating method. The graphene oxide-coated cotton fabrics were then immersed in TiCl₃ aqueous solution as both a reducing agent and a precursor to yield a fabric coated with graphene/titanium dioxide nanocomposite. The crystal phase, morphology, microstructure and other physicochemical properties of the as-prepared samples were characterized by X-ray diffraction, field emission scanning electron microscopy, transmission electron microscopy, X-ray photoelectron spectroscopy, Fourier transform infrared spectroscopy, Raman spectroscopy and UV-Vis reflectance spectroscopy. Electrical resistance, self-cleaning performance, antimicrobial activity and cytotoxicity of treated fabrics were also assessed. The electrical conductivity of the graphene/titanium dioxide nanocomposite-coated fabrics was improved significantly by the presence of graphene on the surface of cotton fabrics. The self-cleaning efficiency of the treated fabrics was tested by degradation of methylene blue in aqueous solution under UV and sunlight irradiations. The results indicated that the decomposition rates of methylene blue were improved by the addition of graphene to the TiO₂ treatment on fabrics. Moreover, the graphene/titanium dioxide nanocomposite-coated cotton samples had negligible toxicity and possessed excellent antimicrobial activity.     

Preparation of durable superhydrophobic surface by sol–gel method with water glass and citric acid

Durable superhydrophobic surface on cotton fabrics has been successfully prepared by sol–gel method. Cellulose fabric was first coated with silica sol prepared with water glass and citric acid as the acidic catalyst. The silica coated fabric was then padded with hydrolyzed hexadecyltrimethoxysilane afterwards obtaining low surface energy. Water contact angle and hydrostatic pressure were used to characterize superhydrophobicity and washing durability. Scanning electron microscopy was used to characterize the surface morphology changes after certain washing times. All results showed good durable hydrophobicity on cellulose fabrics. In addition, the influence of citric acid and sodium hypophosphite (NaH₂PO₂) on the durability of hydrophobicity was also investigated. The durability of treated cotton improved with the increase of concentration of citric acid in the presence of NaH₂PO₂. It could be concluded that citric acid acted as multi-functional heterogeneous grafting chemicals to improve washing durability of hydrophobicity by forming the ester bonds between cotton fabric and silica sol and improved the durability of hydrophobicity.     

Antibacterial cotton treated with N-halamine and quaternary ammonium salt

Quaternary ammonium salts and N-halamines are widely used as biocides in antimicrobial coatings, and have been extensively studied over the past two decades. In this work, 5,5-dimethyl-3-(3′-triethoxysilylpropyl)hydantoin (SPH), and 3-(trimethoxysilylpropyl) octadecyl dimethyl ammonium chloride (SPODA) were synthesized and coated onto cotton fibers using a pad-dry process (PD) and the traditional pad-dry-cure process (PDC). The coated cotton swatches were characterized by FT-IR and SEM. The quaternary ammonium salt showed a relatively lower inactivating bacteria efficacy than did the N-halamine compounds. The chlorinated swatches coated with both SPH and SPODA using the PD process could inactivate about 7 logs of the Staphylococci aureus within 5–10 min and 7 logs of Escherichia coli O157:H7 within 10–30 min, respectively. The addition of quats in N-halamine coatings improved antimicrobial activity against Gram-negative bacteria E. coli O157:H7. However, this result was not observed when the PDC process was applied in coatings because of the increasing hydrophobicity of the coated samples under high coating temperature.     

Identification of Antioxidant and Anti-α-amylase Components in Lotus (Nelumbo nucifera,Gaertn.) Seed Epicarp

Nano-sized Fe₃O₄ was synthesized by chemical co-precipitation and subsequently modified with 3-aminopropyltriethoxysilane (APTES) and glutaraldehyde to introduce aldehyde group on its surface. With the help of “interface activation” by adding sucrose esters-11 as surfactant, lipase from Rhizopus oryzae was successfully immobilized onto the carrier with great enhancement of activity. The hydrolysis activity of immobilized enzyme were 9.16 times and 31.6 times of free enzyme when p-nitrophenol butyrate and p-nitrophenol palmitate were used as substrates. The thermo-stability of immobilized enzyme was also enhanced compared to free enzyme. The immobilized enzyme was successfully applied in synthesis of 1,3-diacyglycerols (1,3-DAG). The specific esterification activity of immobilized enzyme was about 1.5 times of the free enzyme. The immobilized enzyme showed good region-selectivity towards 1,3-diacyglycerols and retained nearly 80% of its activity after reused for 60 times, revealing a good industrial application prospect.

     

Antimicrobial finishing of cotton textile based on water glass by sol–gel method

A low temperature and cost-effective process for antimicrobial finishing of cotton textiles has been developed by sol–gel method. The antimicrobial treatment was performed by treating cotton textile with silica sols from water glass and then with silver nitrate solution. The antimicrobial activity was determined by using E. coli as a model for Gram-negative bacteria. The results showed that the treated textile has an excellent antimicrobial effect and laundering durability. SEM analysis showed coarse surface morphological change on the water glass treated cotton textile. The residual concentration of silver ion on fabrics was informed by ICP-MS. XPS results indicated that two different states of silver were present on the surface of the antimicrobial textile.     

Antimicrobial coatings on textiles–modification of sol–gel layers with organic and inorganic biocides

Antimicrobial textile materials were produced by sol–gel coatings with embedded biocidal compounds. For preparation a sol–gel procedure was used, starting from pure silica sols and 3-glycidyloxypropyltriethoxysilane (GLYEO) containing silica sols. These sols were modified with silver compounds, hexadecyltrimethyl-ammonium-p-toluolsulfonat (HTAT) and copper compounds, respectively. The investigations were performed on viscose fabrics as function of the concentration of biocidal compounds and of thermal treatment of textile after dip-coating between 80 up to 180 °C. The use of modified silica coatings leads to a decreased growth of fungi (Aspergillus niger) and bacteria (Bacillus subtilis and Pseudomonas putida) with increasing amount of the biocide embedded in the coating. The addition of GLYEO supports the biocidal effect of the coatings and enhances the stability of the coating solutions. For preparation of antimicrobial silica coatings the biocides silver, copper or HTAT can be used alone but the combination of these compounds leads to enhanced results against both fungi and bacteria. Therefore silica sols containing a combination of different types of biocides may be used for antimicrobial modification of textiles in some practical applications. For industrial applications the here presented coating solutions are especially advantageous, because of 90% water content in the solvent.     

Reversible denaturation behavior of immobilized glucose oxidase

Glucose oxidase (GOD) was immobilized by using glutaraldehyde crosslinking and various stabilizing agents such as BSA, gelatin, lysozyme, and polyethylenimine (PEI). Studies on the denaturation of the soluble as well as immobilized GOD were carried out for 1 h at various concentrations of guanidine hydrochloride (GdmCl) in 50 mM phosphate buffer, pH 6.0 at 25±1°C. The soluble enzyme required a GdmCl concentration of 5M for total activity loss, whereas for GOD immobilized with BSA, gelatin, lysozyme, and heat-inactivated lysozyme, the corresponding GdmCl concentration required was 8 M. GOD immobilized with PEI, however, was more stable and retained 25% activity when denatured for 1 h using 8 M GdmCl. However, after undergoing denaturation for 1 h, GOD immobilized with lysozyme regained 72% original activity within 20 min of renaturation, while GOD immobilized with BSA, PEI, gelatin, and heat-inactivated lysozyme regained only 39, 21, 20, and 25% of activity, respectively. After five cycles of repeated denaturation and renaturation with 8 M GdmCl, GOD immobilized with lysozyme retained 70% of the original activity. Refolding ability of lysozyme, glutaraldehyde crosslinkages between lysozyme and GOD, together with ionic interactions between them, appear to play an important role in the denaturation-renaturation behavior of the immobilized enzyme.     

Surface hydrophobization of cotton via laccase-mediated polydopamine deposition and dodecyl gallate grafting

Natural fibers containing components with phenolic hydroxyl groups, such as jute, wool, and silk, can be directly modified by laccase-catalyzed grafting. However, cellulosic fibers like cotton cannot be functionalized in this manner. In this work, we developed a facile two-step method to graft polymers on cotton fabric via laccase catalysis. First, polydopamine (PDA) coating was deposited on the surface of the cotton fabrics via catalysis of laccase/2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO) system. Then, the newly formed PDA coating acted as the secondary reaction platform for subsequent laccase-mediated grafting of hydrophobic monomer dodecyl gallate (DG). The oxidation of dopamine (DA) catalyzed with the laccase/TEMPO system was investigated using UV–visible (UV–vis) spectroscopy. The scanning electron microscopy (SEM) and X-ray photoelectron spectroscopy (XPS) results verified that the PDA was coated on the surface of cotton fibers. Fourier transform infrared (FTIR) spectra indicated that the PDA-coated cotton was successfully grafted with DG (DG-PDA-cotton). According to the weighting method, the grafting percentage was about 1.06%. The hydrophobicity of the DG-PDA-cotton fabrics was greatly improved with a contact angle of 133°. Also, the grafted cotton fabrics show repellency of water-soluble stains like coffee, milk, and tea. This study provides a new strategy for surface modification of cotton by laccase-mediated grafting, which offers the references for the green fabrication of cotton fabrics with improved functionalization.     

Effect of polysaccharide structure on protein adsorption

Using X-ray photoelectron spectroscopy for quantification, the adsorption has been studied of chicken egg lysozyme, human serum albumin (HSA), bovine colostrum lactoferrin, and γ-globulin (IgG) from single solutions onto surface-immobilised polysaccharide coatings, which were produced by the covalent attachment of a series of carboxymethyldextrans (CMDs) onto aminated fluoropolymer surfaces. CMDs with differing degrees of carboxymethyl substitution were synthesized by the reaction of dextran with bromoacetic acid under different reactant ratios. Substantial amounts of protein adsorption onto these coatings were observed with the majority of the coating/protein combinations. On the most extensively substituted CMD (1 carboxyl group per 2 dextran units), lysozyme and lactoferrin adsorbed to approximately monolayer amounts whereas there was minimal adsorption of HSA, indicating the importance of electrostatic interfacial interactions. CMD 1:14 was similar whereas the least substituted, least dense coating, from CMD 1:30, adsorbed less lysozyme and lactoferrin but more HSA. Adsorption of the large multidomain protein IgG varied little with the coating. Grazing angle XPS data indicated that for the CMD 1:30 coating there occurred significant in-diffusion of the lower molecular weight proteins. The data suggest that elimination of adsorption of a broad spectrum of proteins is not straightforward with negatively charged polysaccharide coatings; elimination of protein accumulation onto/into such coatings may not be achievable solely with a balance of electrostatic and steric–entropic interfacial forces.     

Durable,water-cleanable,superhydrophilic coatings for oil/water separation under harsh conditions

A simple, economical, and efficient method for fabricating stable hydrophilic/underwater superoleophobic coating under harsh conditions remains a significant challenge. Here, by the hydrolysis of 3-(Methacryloyloxy) propyltrimethoxysilane (TMSPMA) on cotton fabric and the free radical polymerization of [2-(Methacryloyloxy) ethyl] dimethyl-(3-sulfonic acid propyl) ammonium hydroxide (SBMA) and TMSPMA, a superhydrophilic coating was fabricated. The coating can withstand harsh environments, such as strong acid and alkali. In addition, the coated cotton fabrics show an effective separation of surfactant-stabilized oil-in-water emulsions with extreme flux as high as 1500 Lm^?2 h^?1 only under gravity. Importantly, the oil-contaminated coated cotton fabrics can be cleaned only by water washing. The outstanding properties of the coating including durability, recyclability and resistance to harsh environment, highlight its practical application in emulsion separation and oily wastewater purification.