Magnetic,Spectral, Thermal,and Electrical Properties of Coordination Polymers Derived from Terpolymers

Coordination polymers of Cu(II), Ni(II), Co(II), zinc(II), chromium(IU), iron(IU), oxovanadium(N), and dioxouranium-(VI) with p-hydroxybenzoic acid (PHB)-thiourea (T)-trioxane (T) (PHBTT) polymer were prepared. The analytical data agree with 1:1 metal-ligand stoichiometry. Magnetic susceptibility, visible and IR spectra, and thermal and electrical conductivities of the chelates have been studied and probable structures assigned to the chelates.     

New layered materials: syntheses, structures, and optical and magnetic properties of CsGdZnSe3, CsZrCuSe3, CsUCuSe3, and BaGdCuSe3

Four new quaternary selenides CsGdZnSe3, CsZrCuSe3, CsUCuSe3, and BaGdCuSe3 have been synthesized with the use of traditional high-temperature solid-state experimental methods. These compounds are isostructural with KZrCuS3, crystallizing with four formula units in the orthorhombic space group Cmcm. Cell constants (A) at 153 K are CsGdZnSe3 4.1684(7), 15.765(3), 11.0089(18); CsZrCuSe3 3.903(2), 15.841(10), 10.215(6); CsUCuSe3 4.1443(7), 15.786(3), 10.7188(18); and BaGdCuSe3 4.1839(6), 13.8935(19), 10.6692(15). The structure of these ALnMSe3 compounds (A = Cs, Ba; Ln = Zr, Gd, U; M = Cu, Zn) is composed of 2 to infinity [LnMSe3(n-)] (n = 1, 2) layers separated by A atoms. The Ln atom is octahedrally coordinated to six Se atoms, the M atom is tetrahedrally coordinated to four Se atoms, and the A atom is coordinated to a bicapped trigonal prism of eight Se atoms. Because there are no Se-Se bonds in the structure, the oxidation state of A is 1+ (Cs) or 2+ (Ba), that of Ln is 3+ (Gd) or 4+ (Zr, U), and that of M is 1+ (Cu) or 2+ (Zn). CsGdZnSe3 and BaGdCuSe3, which are paramagnetic, obey the Curie-Weiss law and have effective magnetic moments of 7.87(6) and 7.85(5) muB for Gd(3+), in good agreement with the theoretical value of 7.94 muB. Optical transitions at 1.88 and 2.92 eV for CsGdZnSe3 and 1.96 eV for BaGdCuSe3 were deduced from diffuse reflectance spectra.     

Tuning of optical band gaps: syntheses, structures, magnetic properties, and optical properties of CsLnZnSe(3) (Ln = Sm, Tb, Dy, Ho, Er, Tm, Yb, and Y)

Eight new quaternary selenides CsSmZnSe(3), CsTbZnSe(3), CsDyZnSe(3), CsHoZnSe(3,) CsErZnSe(3), CsTmZnSe(3), CsYbZnSe(3), and CsYZnSe(3) have been synthesized with the use of high-temperature solid-state experimental methods. These compounds are isostructural with KZrCuS(3), crystallizing with four formula units in the orthorhombic space group Cmcm. The structure of these CsLnZnSe(3) compounds is composed of [LnZnSe(3)(-)] layers separated by Cs atoms. The Ln atom is octahedrally coordinated by six Se atoms, the Zn atom is tetrahedrally coordinated by four Se atoms, and the Cs atom is coordinated by a bicapped trigonal prism of eight Se atoms. Because there are no Se-Se bonds in the structure, the oxidation state of Cs is 1+, that of Ln is 3+, and that of Zn is 2+. CsYbZnSe(3) exhibits an antiferromagnetic transition at 11 K, whereas CsSmZnSe(3) does not follow a Curie-Weiss law. The remaining rare-earth compounds are paramagnetic, and the calculated effective magnetic moments of the rare-earth ions agree well with their theoretical values. Optical absorption data on face-indexed single crystals of CsSmZnSe(3), CsErZnSe(3), CsYbZnSe(3), and CsYZnSe(3) demonstrate that the optical band gap changes by more than 0.75 eV with the composition and by as much as 0.20 eV with the crystal orientation. The optical band gaps range from 2.63 eV (CsSmZnSe(3), CsErZnSe(3)) to 1.93 eV (CsYbZnSe(3)) for the (010) crystal face and 2.56 eV (CsErZnSe(3)) to 1.88 eV (CsYbZnSe(3)) for the (001) crystal face. The difference in the optical band gap of the (010) face vs the (001) face varies from +0.05 eV (CsYbZnSe(3)) to +0.20 eV (CsSmZnSe(3)).     

Structures of novel epipolythiodioxopiperazines, emethallicins B, C, and D, potent inhibitors of histamine release, from Emericella heterothallica

Novel compounds designated emethallicins B (1), C (2), and D (3), along with emethallicin A (4), were isolated from the mycelium of the heterothallic fungus, Emericella heterothallica (mating type a). The structures of emethallicins B (1), C (2), and D (3) were determined on the basis of spectroscopic and chemical investigations. Emethallicins B (1) and C (2) are epitetrathiodioxopiperazines, which have the same basic carbon skeleton as apoaranotin (19) and acetylaranotin (17), respectively, whereas emethallicin D (3) is an epitrithiodioxopiperazine derivative, which has the same carbon skeleton as apoaranotin (19). It is very interesting that a large amount of the disulfide, emethallicin A (4), was isolated from the strain of mating type A and that the corresponding tetrasulfide, emethallicin B (1), and trisulfide, emethallicin D (3), were isolated from the other mating type strain, along with a small amount of the disulfide (4). Emethallicins B (1), C (2), and D (3) have potent inhibitory activity against compound 48/80-induced histamine release from mast cells, like emethallicin A (4).     

Ab initio determination of the electric multipole moments and static (hyper)polarizability of HCCX,X = F,Cl, Br,and I

We report electric multipole moments and (hyper)polarizabilities for the haloethynes HCCX, X = F, Cl, Br, and I. The molecular properties have been obtained from finite-field self-consistent field, M?ller-Plesset perturbation theory and coupled cluster calculations with large, carefully optimized basis sets of gaussian-type functions. The mean dipole (hyper)polarizability and the mean quadrupole polarizability near the Hartree-Fock limit are alpha/e(2)a(0) (2)E(h) (-1) = 23.74 (HCCF), 37.26 (HCCCl), 43.97 (HCCBr), 56.44 (HCCI), beta/e(3)a(0) (3)E(h) (-2) = -73.9 (HCCF), -67.0 (HCCCl), -39.5 (HCCBr), 42.7 (HCCI), gamma/e(4)a(0) (4)E(h) (-3) = 4,914 (HCCF), 6,554 (HCCCl), 9,328 (HCCBr), 14,949 (HCCI), and C/e(2)a(0) (4)E(h) (-1) = 160.3 (HCCF), 317.1 (HCCCl), 471.2 (HCCBr), 671.2 (HCCI). Electron correlation has a small effect on the dipole polarizability but affects strongly the hyperpolarizability. Agreement with the available experimental data is more or less fair for HCCF, HCCCl, and HCCBr but less satisfactory for HCCI.     

Microdetermination of Mn, Fe, Co, Ni, Cu, Zn, Ag, Cd, Hg, Pb, Bi and U in inorganic and organometallic compounds with morpholinium morpholine-N-dithiocarboxylate

The chelates of morpholinium morpholine-N-dithiocarboxylate with manganese(II), iron(II), iron(III), cobalt(II), nickel, copper(II), zinc, silver, cadmium, mercury(II), lead, bismuth and uranium(VI) have been prepared and their compositions elucidated. Simple, accurate and relatively rapid procedures for the gravimetric and titrimetric microdetermination of these metals in inorganic and organometallic compounds are presented.     

Vanadium(III) as an analytical reagent: The titrimetric determination of iron, copper, thallium, molybdenum, uranium, vanadium, chromium and manganese

Vanadium(III) solutions can be used in direct titrations of iron(III), copper(II), thallium(III), molybdenum(VI), uranium(VI), vanadium(V), chromium(VI) and manganese(VII) in milligram amounts. The titrations are done at 70-80 degrees for iron(III), copper(II), thallium(III), molybdenum(VI) and at room temperature for vanadium(V), chromium(VI) and manganese(VII). Uranium(VI) is titrated at 70-80 degrees in presence of iron(II). The vanadium(III) solution is prepared by reduction of vanadium(V) to vanadium(IV) with sulphur dioxide, followed by addition of phosphoric acid and reduction with iodide, and is reasonably stable.     

Sampling and analysing mixtures of sulphate, sulphite, thiosulphate and polythionate

Interpreting the redox chemistry of sulphur in aqueous systems requires the analysis of mixtures of various sulphoxy anions. Previous methods have been too involved to permit high sample throughout if good quality control is to be maintained. Methods based on ion chromatography have been developed for the direct determination of SO(2-)(4), SO(2-)(3), S(2)O(2-)(3), and SCN(-). The determination of thiocyanate permits the indirect determination of polythionates by treatment with cyanide. Formate, acetate, F(-), Cl(-), CO(2-)(3), and PO(3-)(4), do not interfere, but NO(-)(2) and NO(-)(3) interfere with determination of SO(2-)(3),. The sample preservation treatment includes addition of formaldehyde, cation-exchange and cold storage, to retard oxidation of S(2)O(2-)(3), and SO(2-)(3), and inhibits the rearrangement of SO(2-)(3),/S(2)O(2-)(3),/S(n)O(2-)(6), mixtures caused by bimolecular nucleophilic displacement (S(N)2) reactions. Treated samples may be stored for up to 6 weeks with only minor loss of thiosulphate.     

Kinetics and mechanisms of the tropospheric reactions of menthol, borneol, fenchol, camphor, and fenchone with hydroxyl radicals (OH) and chlorine atoms (Cl)

Relative kinetic techniques have been used to measure the rate coefficients for the reactions of oxygenated terpenes (menthol, borneol, fenchol, camphor, and fenchone) and cyclohexanol with hydroxyl radicals (OH) and chlorine atoms (Cl) at 298 ± 2 K and atmospheric pressure. The rate coefficients obtained for the reactions of the title compounds with OH are the following (in units of 10(-11) cm(3) molecule(-1) s(-1)): (1.48 ± 0.31), (2.65 ± 0.32), (2.49 ± 0.30), (0.38 ± 0.08), (0.39 ± 0.09) for menthol, borneol, fenchol, camphor, and fenchone, respectively. For the corresponding reactions with Cl atoms the rate coefficients are as follows (in units of 10(-10) cm(3) molecule(-1) s(-1)): (3.21 ± 0.26), (3.40 ± 0.28), (2.72 ± 0.13), (2.93 ± 0.17), (1.59 ± 0.10), and (1.86 ± 0.29) for cyclohexanol, menthol, borneol, fenchol, camphor, and fenchone, respectively. The reported error is twice the standard deviation. Product studies of the reactions were performed using multipass in situ FTIR (Fourier transform infrared spectroscopy) and solid-phase microextraction (SPME) with analysis by GC-MS (gas chromatography-mass spectrometry). A detailed mechanism is proposed to justify the observed reaction products.     

Stability studies of arsenic, selenium, antimony and tellurium species in water, urine, fish and soil extracts using HPLC/ICP-MS

The stability of arsenic, selenium, antimony and tellurium species in water and urine (NIST SRM 2670n) as well as in extracts of fish and soil certified reference materials (DORM-2 and NIST SRM 2710) has been investigated. Stability studies were carried out with As(III), As(V), arsenobetaine, monomethylarsonic acid (MMA), dimethylarsinic acid (DMA), phenylarsonic acid (PAA), Se(IV), Se(VI), selenomethionine, Sb(III), Sb(V) and Te(VI). Speciation analysis was performed by on-line coupling of anion exchange high-performance liquid chromatography (HPLC) with inductively coupled plasma mass spectrometry (ICP-MS). Best storage of aqueous mixtures of the examined species was achieved at 3 degrees C whereas at -20 degrees C species transformation especially of selenomethionine and Sb(V) took place and a new selenium species appeared within a period of 30 days. Losses and species transformations during extraction processes were investigated. Extraction of the spiked fish material with methanol/water led to partial conversion of Sb(III), Sb(V) and selenomethionine to two new antimony and one new selenium species. The other arsenic, selenium and tellurium species were almost quantitatively extracted. For soil spiked with MMA, PAA, Se(IV) and Sb(III), recoveries after extraction with water and sulfuric acid (0.01 mol/L) were below 20%.     

Kinetics and mechanisms of aqueous ozone reactions with bromide, sulfite, hydrogen sulfite, iodide, and nitrite ions

Reactions of ozone with Br(-), SO(3)(2-), HSO(3)(-), I(-), and NO(2)(-), studied by stopped-flow and pulsed-accelerated-flow techniques, are first order in the concentration of O(3)(aq) and first order in the concentration of each anion. The rate constants increase by a factor of 5 x 10(6) as the nucleophilicities of the anions increase from Br(-) to SO(3)(2-). Ozone adducts with the nucleophiles are proposed as steady-state intermediates prior to oxygen atom transfer with release of O(2). Ab initio calculations show possible structures for the intermediates. The reaction between Br(-) and O(3) is accelerated by H(+) but exhibits a kinetic saturation effect as the acidity increases. The kinetics indicate formation of BrOOO(-) as a steady-state intermediate with an acid-assisted step to give BrOH and O(2). Temperature dependencies of the reactions of Br(-) and HSO(3)(-) with O(3) in acidic solutions are determined from 1 to 25 degrees C. These kinetics are important in studies of annual ozone depletion in the Arctic troposphere at polar sunrise.     

Polarizabilities and hyperpolarizabilities for the atoms Al, Si, P, S, Cl, and Ar: Coupled cluster calculations

Accurate static dipole polarizabilities and hyperpolarizabilities are calculated for the ground states of the Al, Si, P, S, Cl, and Ar atoms. The finite-field computations use energies obtained with various ab initio methods including Moller-Plesset perturbation theory and the coupled cluster approach. Excellent agreement with experiment is found for argon. The experimental alpha for Al is likely to be in error. Only limited comparisons are possible for the other atoms because hyperpolarizabilities have not been reported previously for most of these atoms. Our recommended values of the mean dipole polarizability (in the order Al-Ar) are alpha/e(2)a(0) (2)E(h) (-1)=57.74, 37.17, 24.93, 19.37, 14.57, and 11.085 with an error estimate of +/-0.5%. The recommended values of the mean second dipole hyperpolarizability (in the order Al-Ar) are gamma/e(4)a(0) (4)E(h) (-3)=2.02 x 10(5), 4.31 x 10(4), 1.14 x 10(4), 6.51 x 10(3), 2.73 x 10(3), and 1.18 x 10(3) with an error estimate of +/-2%. Our recommended polarizability anisotropy values are Deltaalpha/e(2)a(0) (2)E(h) (-1)=-25.60, 8.41, -3.63, and 1.71 for Al, Si, S, and Cl respectively, with an error estimate of +/-1%. The recommended hyperpolarizability anisotropies are Deltagamma/e(4)a(0) (4)E(h) (-3)=-3.88 x 10(5), 4.16 x 10(4), -7.00 x 10(3), and 1.65 x 10(3) for Al, Si, S, and Cl, respectively, with an error estimate of +/-4%.     

ICP-AES法测定化妆品中铅、镉、砷、汞、锑、铬、镍、钡、锶等禁限用元素含量

建立了化妆品中铅(Pb)、镉(Cd)、砷(As)、汞(Hg)、锑(Sb)、铬(Cr)、镍(Ni)、钡(Ba)、锶(Sr)含量的电感耦合等离子体原子发射光谱法(ICP-AES)同步检测技术。采用微波消解,在较难消化的化妆品中加HF进行消化,铑(Rh)为内标元素消除基体干扰,以配备耐HF进样系统的ICP-AES进行测定。在0～1.0 mg/L范围内呈现良好的线性关系(相关系数≥0.9999),Pb、Cd、As、Hg、Sb、Cr、Ni、Ba、Sr检出限分别为0.0016,0.0007,0.0021,0.0013,0.0003,0.0009,0.0008,0.0009,0.0021 mg/L,方法回收率80.2%～111%,精密度1.7%～8.2%。结果表明,该方法适用于检测基体复杂的化妆品中Pb、Cd、As、Hg、Sb、Cr、Ni、Ba、Sr。     

Synthesis, crystal and electronic structures, and properties of the new pnictide semiconductors A2CdPn2 (A = Ca, Sr, Ba, Eu; Pn = P, As)

A series of ternary Zintl phases, Ca(2)CdP(2), Ca(2)CdAs(2), Sr(2)CdAs(2), Ba(2)CdAs(2), and Eu(2)CdAs(2), have been synthesized through high temperature metal flux reactions, and their structures have been characterized by single-crystal X-ray diffraction. They belong to the Yb(2)CdSb(2) structure type and crystallize in the orthorhombic space group Cmc2(1) (No. 36, Z = 4) with cell dimensions of a = 4.2066(5), 4.3163(5), 4.4459(7), 4.5922(5), 4.4418(9) ?; b = 16.120(2), 16.5063(19), 16.904(3), 17.4047(18), 16.847(4) ?; c = 7.0639(9), 7.1418(8), 7.5885(11), 8.0526(8), 7.4985(16) ? for Ca(2)CdP(2) (R1 = 0.0152, wR2 = 0.0278), Ca(2)CdAs(2) (R1 = 0.0165, wR2 = 0.0290), Sr(2)CdAs(2) (R1 = 0.0238, wR2 = 0.0404), Ba(2)CdAs(2) (R1 = 0.0184, wR2 = 0.0361), and Eu(2)CdAs(2) (R1 = 0.0203, wR2 = 0.0404), respectively. Among these, Ca(2)CdAs(2) was found to form with another closely related structure, depending on the experimental conditions--monoclinic space group Cm (No. 8, Z = 10) with lattice constants a = 21.5152(3) ?, b = 4.30050(10) ?, c = 14.3761(2) ? and β = 110.0170(10)° (R1 = 0.0461, wR2 = 0.0747). UV/vis optical absorption spectra for both forms of Ca(2)CdAs(2) show band gaps on the order of 1.0 eV, suggesting semiconducting properties, which have also been confirmed through electronic band structure calculations based on the density-functional theory. Results from differential scanning calorimetry measurements probing the thermal stability and phase transitions in the two Ca(2)CdAs(2) polymorphs are discussed. Magnetic susceptibility measurements for Eu(2)CdAs(2), indicating divalent Eu(2+) cations, are presented as well.     

Pre-column chelation liquid chromatographic separation and determination of trace V,Cu, Co,Pd, Fe and Ni

Conditions for the separation by reversed-phase liquid chromatography (LC) of V(V), Cu(II), Co(III), Pd(II), Fe(III) and Ni(II) chelates with 2-(5-bromopyridylazo)-5-diethylaminophenol (5-Br-PADAP) were studied. Six species of metal chelates were separated successfully with methanol-acetonitrile-water (72:12:16, v/v/v) containing 0.13 M NaCl and 0.29 mM cetyltrimethylammonium bromide (pH 5.0) as the mobile phase on a Nucleosil C₁₈ (5 μm) column (250 × 4 mm i.d.).The conditions of the determination of these metal chelates are discussed. A simple and rapid method for the determination of trace amounts of V(V), Cu(II), Co(III), Pd(II) and Ni(II) simultaneously by reversed-phase LC has been developed. The detection limits are 5 × 10^?12, 1 × 10^?10, 3 × 10^?11, 5.3 × 10^?9 and 2 × 10^?10 g, respectively. The method is applied to the determination of these metals in natural waters and mineral samples.     

Syntheses, characterization, and X-ray crystal structures of beta-diketiminate group 13 hydrides, chlorides, and fluorides

A series of organometallic compounds of group 13 metals supported by the sterically encumbered beta-diketiminate ligand containing hydrides, fluorides, chlorides, and bromide have been synthesized and structurally characterized. The synthetic strategy applied utilizes halide metathesis and reduction of metal chlorides to the corresponding hydrides. Thus, the reaction of LLi.OEt2 with MeMCl2 affords LM(Me)Cl (M = Al (1), Ga (2), In (3)) and LGaBr2 (4) with GaBr3. Reduction of LGa(Me)Cl with LiH.BEt3 leads to the formation of LGa(Me)H (10). Synthesis of LGaH(2) (12) has been accomplished by reacting LGaI2 (8) with LiH.BEt3. LAl(Me)Cl (1) and LAlH2 (6) have been converted to LAl(Me)F (5) and LAlF2 (7), respectively. The former was obtained in a reaction of LAl(Me)Cl with Me3SnF while the latter was isolated in a reaction of LAlH2 with BF3.OEt2. Similarly reaction of LGaI2 (8) with Me3SnF affords LGaF2 (9). Compounds reported herein have been characterized by elemental analyses, IR, NMR, EI-MS, and single-crystal X-ray diffraction techniques.     

Synthesis and characterization of some pyrimidine, purine, amino acid and mixed ligand complexes

Mn(II), Fe(III), Co(II), Ni(II), Cu(II), Zn(II) and Cd(II) complexes of barbital, thiouracil, adenine, amino acids (methionine, lysine and alanine) and some mixed ligands were prepared and characterized by elemental analyses, IR, electronic spectra, magnetic susceptibility and ESR spectra. Coordination of the metallic centre to the oxygen and nitrogen atoms of barbital, thiouracil, amino acids and coordinate to amino group and nitrogen atom of adenine occurred. Electronic spectra and magnetic susceptibility measurements were utilized to infer the structure of the complexes which are octahedral for Mn(II), Fe(III), Co(II), Ni(II) and Cd(II) and tetrahedral for Mn(II), Cu(II), Zn(II) complexes. ESR spectra were observed for copper complexes with a d(x2)-(y2) ground state with small g(||) values indicating strong interaction between the ligands and their metal ions.     

Magnetic,Spectral, Thermal,and Electrical Properties of Coordination Polymers Derived from Terpolymers

Coordination polymers of Cu(II), Ni(II), Co(II), Zn(II), Cr(III), Fe(III), oxovanadium (IV), and dioxouranium(VI) with salicylic acid (S)-thiourea (T)-trioxane (T) (STT) polymer were prepared. The analytical data agree with 1:1 metal-ligand stoichiometry. Elemental analyses, magnetic, spectral, and thermal properties, and electrical conductivities of STT and its chelates have been studied and probable structures are assigned to the coordination polymers. All the chelates are amorphous powders, insoluble in common organic solvents, and showing slight solubility in DMF.     

Synthesis, structure, chemical stability, and electrical properties of Nb-, Zr-, and Nb-codoped BaCeO3 perovskites

We report the effect of donor-doped perovskite-type BaCeO(3) on the chemical stability in CO(2) and boiling H(2)O and electrical transport properties in various gas atmospheres that include ambient air, N(2), H(2), and wet and dry H(2). Formation of perovskite-like BaCe(1-x)Nb(x)O(3±δ) and BaCe(0.9-x)Zr(x)Nb(0.1)O(3±δ) (x = 0.1; 0.2) was confirmed using powder X-ray diffraction (XRD) and electron diffraction (ED). The lattice constant was found to decrease with increasing Nb in BaCe(1-x)Nb(x)O(3±δ), which is consistent with Shannon's ionic radius trend. Like BaCeO(3), BaCe(1-x)Nb(x)O(3±δ) was found to be chemically unstable in 50% CO(2) at 700 °C, while Zr doping for Ce improves the structural stability of BaCe(1-x)Nb(x)O(3±δ). AC impedance spectroscopy was used to estimate electrical conductivity, and it was found to vary with the atmospheric conditions and showed mixed ionic and electronic conduction in H(2)-containing atmosphere. Arrhenius-like behavior was observed for BaCe(0.9-x)Zr(x)Nb(0.1)O(3±δ) at 400-700 °C, while Zr-free BaCe(1-x)Nb(x)O(3±δ) exhibits non-Arrhenius behavior at the same temperature range. Among the perovskite-type oxides investigated in the present work, BaCe(0.8)Zr(0.1)Nb(0.1)O(3±δ) showed the highest bulk electrical conductivity of 1.3 × 10(-3) S cm(-1) in wet H(2) at 500 °C, which is comparable to CO(2) and H(2)O unstable high-temperature Y-doped BaCeO(3) proton conductors.     

Synthesis and molecular structures of phenylamides of magnesium, calcium, strontium, and barium--from molecular to polymeric structures

Several preparative procedures for the synthesis of the THF complexes of the alkaline earth metal bis(phenylamides) of Mg (1), Ca (2), Sr (3), and Ba (4) are presented such as metalation of aniline with strontium and barium, metathesis reactions of MI2 with KN(H)Ph, and metalation of aniline with arylcalcium compounds or dialkylmagnesium. The THF content of these compounds is rather low and an increasing aggregation is observed with the size of the metal atom. Thus, tetrameric [(THF)2Ca{mu-N(H)Ph}2]4 (2) and polymeric [(THF)2Sr{mu-N(H)Ph}2]infinity and {[(THF)2Ba{mu-N(H)Ph}2]2[(THF)Ba{mu-N(H)Ph}2]2}infinity show six-coordinate metal atoms with increasing interactions to the pi systems of the phenyl groups with increasing the radius of the alkaline earth metal atom.