组份可控的钌螯合物功能单分子膜

用作“表面离子”的钌螯合物Ru(dpphen)32+与脂肪酸类成膜分子以1:2混合时能够得到稳定的混合单分子膜.以十八烷基三氯硅烷（octadecayl trichloro silane, OTS）分子部分取代Ru(dpphen)32+,得到功能分子组份可控的混合单分子膜.研究表明,OTS分子在纯水表面上可以形成交联网状单分子膜结构,混入硬脂酸（SA）分子后,网状结构逐渐被破坏.SA含量增加,破坏的程度就增大,直至SA/OTS为3:1时,完全没有网状交联结构,形成可以用来沉积LB膜的均匀致密的单分子膜.表面离子Ru(dpphen)32+与OTS和SA一起构成三组份混合单分子膜,OTS和Ru(dpphen)32+为表面离子.单分子膜中混有Ru(dpphen)32+分子,可以有效地阻止OTS的交联发生,同时Ru(dpphen)32+/SA基团与OTS/SA基团是均匀共混的.改变Ru(dpphen)32+/SA基团与OTS/SA基团的混合比,即可以做到Ru(dpphen)32+的组份精确可控,得到可用来沉积LB膜的均一、稳定的单分子膜.     

花生酸-钌有机螯合物Ru(phen)2 3+的单分子膜和LB膜中分子聚集行为的研究

以功能性的钌有机螯合物Ru(phen)2 3+作为亚相离子,花生酸在亚相表面上形成稳定的单分子膜.π-A等温线和动态弹性测量表明,此膜因花生酸与钌螯离子发生了静电相互作用而有更大的可压缩性,并在固态区发生了分子聚集.用垂直法成功地制备了嵌有Ru(phen)2 3+离子的超薄有序Y-型LB膜.光谱实验表明,所得LB膜是稳定、均匀的层状三明治结构,在层面内Ru(phen)23+与花生酸结合成相对稳定的分子基团并形成了J-聚体.     

花生酸-钌有机螯合物Ru(phen)_3~(2+)的单分子膜和LB膜中分子聚集行为的研究

以功能性的钌有机螯合物Ru(phen) 2 + 3 作为亚相离子 ,花生酸在亚相表面上形成稳定的单分子膜 .π A等温线和动态弹性测量表明 ,此膜因花生酸与钌螯离子发生了静电相互作用而有更大的可压缩性 ,并在固态区发生了分子聚集 .用垂直法成功地制备了嵌有Ru(phen) 2 + 3 离子的超薄有序Y 型LB膜 .光谱实验表明 ,所得LB膜是稳定、均匀的层状三明治结构 ,在层面内Ru(phen) 2 + 3 与花生酸结合成相对稳定的分子基团并形成了J 聚体     

一种具有“浮萍”结构的单分子膜与Langmuir—Blodgett多层膜

本文以St-DVB微凝胶/甲基丙烯酸两性接枝共聚物制成了一种新型“浮萍”结构的单分子膜,并转移制备了LB多层膜,对其单分子膜的性质、LB多层膜的二维有序结构及膜的热稳定性进行了较深入的研究。     

多金属氧簇与倍半硅氧烷簇构筑的哑铃形杂化分子Langmuir膜和Langmuir-Blodgett膜

以两个形状杂化分子(Shape Hybrid Molecules)为目标分子, 研究了它们在气液界面上形成Langmuir膜的过程和Langmuir-Blodgett (LB)膜的聚集态结构. 杂化分子是由Wells-Dawson型磷钨氧簇(Polyoxometalates, POMs)和T₈型的倍半硅氧烷簇(Polyhedral Oligosilsesquioxane, POSS), 通过对苯二甲酸有机连接链(OL)用共价键构筑的具有杂化性质和哑铃形状的簇-簇杂化分子(POM-OL-POSS). 这两种杂化分子的差别在于POSS段中, 外围有机基团的尺寸不同. 在实验中, 采用Langmuir和LB膜技术, 了解POSS外围的七个取代基变化导致的分子尺寸变化对Langmuir膜形成过程和LB膜结构的影响. 采用Langmuir技术测定了表面压-平均分子面积(π-A)等温曲线和π-A循环等温曲线, 跟踪并研究了这两个杂化分子在水表面上形成Langmuir膜的过程. 实验结果表明, 两个杂化分子都表现出良好的两亲性, 从气相变化到固相的过程中, 杂化分子经历了从分散到集中的过程. 将这些膜转移到基片上, 得到单层的LB膜, 再利用原子力显微镜(AFM)和透射电子显微镜(TEM)研究了LB膜的表面形貌和聚集态结构. 由于POM段中含有钨和钒金属, 可以直接用TEM观察聚集态结构, 发现了在气-液和液-固相转变过程中, LB膜中杂化分子的聚集态结构都呈现涨落特征, 一种凝聚态物理中由相转变导致结构涨落的重要物理现象. 本研究获得的结果能够帮助我们以及这个领域的研究者们继续优化杂化分子的结构, 进一步构筑具有有序结构的膜和本体材料.     

花生酸-钌有机螯合物Ru(phen)_3~(2+)的单分子膜和LB膜中分子聚集行为的研究

以功能性的钌有机螯合物Ru(phen)_3~(2+)作为亚相离子,花生酸在亚相表面 上形成稳定的单分子膜。π-A等温线和动态弹性测量表明,此膜因花生酸与钌螯离 子发生了静电相互作用而有更大的可压缩性,并在固态区发生了分子聚集。用垂直 法成功地制备了嵌有Ru(phen)_3~(2+)离子的超薄有序Y-型LB膜。光谱实验表明, 所得LB膜是稳定、均匀的层状三明治结构,在层面内Ru(phen)_3~(2+)与花生酸结 合成相对稳定的分子基团形成了J-聚体。     

聚离子复合物单分子膜的聚集结构研究

LB膜在非线性光学材料、生物传感器等众多领域有着诱人的应用前景,受到了广泛的关注.为了充分发挥LB 膜的功能,必须制备高度取向、无缺陷的LB 膜,因此充分把握LB膜的构成单元单分子膜的聚集结构显得十分重要.由于气液界面离子复合结构的形成对单分子膜的聚集结构产生很大的影响,近年,有关这方面的工作越来越活跃.本文以探讨     

表面离子法制备多组分LB膜和CeO_2-Gd_2O_3陶瓷膜

以铈、钆的β二酮螯合物Ce(tmhd)_4和Gd(tmhd)_3(tmhd = tetramethylheptanedionate)为表面离子,与花生酸（AA）在水面上共铺展,可 形成具有良好相容性、稳定性和可压缩性的混合Langmuir膜,这是由于稀土螯合物 与AA间发生了新的配合,而且Gd(tmhd)_3与AA间的相互作用更强。用垂直法将它们 的三组分混合Langmuir膜沉积,制得了具有良好周期性结构的Y型三组分混合LB膜 。以它作前驱物,经过紫外臭氧（UVO）和热处理,制得了CeO_2-Gd_2O_3(CGO)超 薄陶瓷膜。X射线光电子能谱（XPS）表明,由于两种稀土螯合物和AA间的结合强度 不同,在沉积LB膜时表面离子发生了选择性转移,而且温度对表面离子的转移选择 性有影响。这对制备组分和厚度可控的应用薄膜很有意义。     

胆红素及其两亲衍生物的Langmuir-Blodgett膜研究

研究了亚相酸度和金属离子对胆红素(1)及其两个两亲衍生物胆红素二(十八烷基)酯(2)和胆红素二(十八烷基)酰胺(3)的单分子膜和LB膜性能的影响.通过π-A等温线、X射线光电子能谱、紫外-可见光谱等方法,研究了它们在有序分子膜中的分子伸展及与金属离子的配位方式.胆红素及其两亲衍生物与金属离子在有序分子膜中的配位(生成1:1型配合物)明显不同于其在本体溶液中的配位(1:1,1:2或2:1型配合物).小角X射线衍射表明1,2和3形成双层膜间距分别为2.15,5.55和5.65nm的Y型LB膜.     

胆红素有序分子膜的行为研究

研究了不同亚相表面胆红素(BR)单分子膜和LB膜的性质,讨论了胆红素分子在有序分子膜中的堆积密度、分子伸展和金属离子配位。在气-水界面,BR与金属离子的配位导致BR单分子截面积、崩溃压和可见紫外光谱的变化。原子力显微镜表明BR-Cu单分子膜的厚渡为1.23 nm。     

Lignin from sugar cane bagasse: extraction, fabrication of nanostructured films, and application

Four lignin samples were extracted from sugar cane bagasse using four different alcohols (methanol, ethanol, n-propanol, and 1-butanol) via the organosolv-CO2 supercritical pulping process. Langmuir films were characterized by surface pressure vs mean molecular area (Pi-A) isotherms to exploit information at the molecular level carrying out stability tests, cycles of compression/expansion (hysteresis), subphase temperature variations, and metallic ions dissolved into the water subphase at different concentrations. Briefly, it was observed that these lignins are relatively stable on the water surface when compared to those obtained via different extraction processes. Besides, the Pi-A isotherms are shifted to smaller molecular areas at higher subphase temperatures and to larger molecular areas when the metallic ions are dissolved into the subphase. The results are related to the formation of stable aggregates (domains) onto the water subphase by these lignins, as shown in the Pi-A isotherms. It was found as well that the most stable lignin monolayer onto the water subphase is that extracted with 1-butanol. Homogeneous Langmuir-Blodgett (LB) films of this lignin could be produced as confirmed by UV-vis absorption spectroscopy and the cumulative transfer parameter. In addition, FTIR analysis showed that this lignin LB film is structured in a way that the phenyl groups are organized preferentially parallel to the substrate surface. Further, these LB films were deposited onto gold interdigitated electrodes and ITO and applied in studies involving the detection of Cd+2 ions in aqueous solutions at low concentration levels through impedance spectroscopy and electrochemical measurements. FTIR spectroscopy was carried out before and after soaking the thin films into Cd+2 aqueous solutions, revealing a possible physical interaction between the lignin phenyl groups and the heavy metal ions. The importance of using nanostructured systems is demonstrated as well by comparing both LB and cast films.     

Tuning the arrangement of mono-crown ether-substituted phthalocyanines in Langmuir-Blodgett films by the length of alkyl chains and the cation in subphase

Amphiphilic phthalocyanines with one crown ether and three alkyl chain substitutions can form stable monolayers on a water surface. This monolayer can be transferred to a substrate by a vertical dipping method. The arrangement of phthalocyanine molecules in LB films was affected by the length of alkyl chains and the coordination of alkali ions in crown ether. Davydov splitting was observed in the absorption spectra of the LB films of phthalocyanine with the shortest alkyl chain substitutions, and this splitting was affected by the alkali ions in the subphase.     

Characterization of Langmuir and Langmuir-Blodgett films of a thiomacrocyclic ionophore by surface pressure and AFM

The new synthesized thiomacrocyclic ionophore 4-phenyl-4-sulfide-11-(1-oxodecyl)-1,7-dithia-11-aza-4-phosphacyclotetradecane has proven to form Langmuir and Langmuir-Blodgett (LB) films. This ionophore shows a large affinity for copper(II) ions. Thus, the influence of the subphase composition on the surface pressure-area isotherms has been studied. The LB films have been observed by AFM and the effect of the subphase composition and the deposition surface pressure on the LB films is discussed. AFM image morphology has been correlated to the ionophore molecular structure. Surface pressure-area isotherms and AFM images show that the presence of copper(II) ions has an important role in the film structure.     

由组分可控的LB膜前驱物法制备Y2O3稳定立方相ZrO2的超薄陶瓷膜

由有机LB膜技术发展了一种制备组分、厚度可控的无机超薄陶瓷膜的方法.以Zr、 Y的β-二酮络合物的作为"表面离子"代替传统的亚相离子,沉积它们与花生酸的混合LB膜.并将它作为前驱物,经臭氧处理和热处理,成功制得了Y2O3稳定的立方相ZrO2超薄膜(YSZ).用X射线衍射(XRD)、 X射线光电子能谱(XPS)等手段研究了YSZ薄膜的相结构和其组成.结果表明,超薄陶瓷膜中Zr与Y的含量比率控制得很好,且形成Y2O3稳定的立方相ZrO2.说明这种方法可以成功地用来制备组分和膜厚均可控的纳米陶瓷膜.     

Exploiting distinct molecular architectures of ultrathin films made with iron phthalocyanine for sensing

The possibility of generating distinct film properties from the same material is crucial for a number of applications, which can only be achieved by controlling the molecular architecture. In this paper we demonstrate as a proof-of-principle that ultrathin films produced from iron phthalocyanine (FePc) may be used to detect trace amounts of copper ions in water, where advantage was taken of the cross sensitivity of the sensing units that displayed distinct electrical properties. The ultrathin films were fabricated with three methods, namely physical vapor deposition (PVD), Langmuir-Blodgett (LB), and electrostatic layer-by-layer (LbL) techniques, where for the latter tetrasulfonated phthalocyanine was used (FeTsPc). PVD and LB films were more homogeneous than the LbL films at both microscopic and nanoscopic scales, according to results from micro-Raman spectroscopy and atomic force microscopy (AFM), respectively. From FTIR spectroscopy data, these more homogeneous films were found to have FePc molecules oriented preferentially, tilted in relation to the substrate surface, while FeTsPc molecules were isotropically distributed in the LbL films. Impedance spectroscopy measurements with films adsorbed onto interdigitated gold electrodes indicated that the electrical response depends on the type of film-forming method and varies with incorporation of copper ions in aqueous solutions. Using principal component analysis (PCA), we were able to exploit the cross sensitivity of the sensing units and detect copper ions (Cu(2+)) down to 0.2 mg/L, not only in ultrapure water but also in distilled and tap water. This level of sensitivity is sufficient for quality control of water for human consumption, with a fast, low-cost method.     

Langmuir膜及LB膜中的金属参与

本文主要介绍了金属离子与Langmuir膜及LB膜相互作用中静电、配位等作用方式及其对膜相态和分子二维排列的影响。在此基础上探讨了Langmuir膜对金属离子的识别与传感。以Langmuir膜和LB膜为二维模板诱导无机盐定向生长作为金属/单分子膜结合的重要应用在文中也进行了讨论。通过举例展示了金属离子参与的Langmuir膜和LB膜催化有机反应的特点。最后对金属参与的Langmuir膜和LB膜在功能化和器件化等方面的研究也作了论述， 并通过介绍金属螯合类脂分子的Langmuir膜在蛋白质等生物大分子界面定向聚集研究中的应用表明了金属参与的Langmuir膜及LB 膜在生命科学研究中的意义。全文贯穿了金属结合调节Langmuir膜和LB膜组装结构以及通过金属结合导入功能基团进行有序组装的思想。     

Langmuir-Blodgett films of biopolymers: a method to obtain protein multilayers

In this work, we present a methodology for choosing the best experimental conditions for transferring protein Langmuir films onto solid substrates. As an example of applying the proposed methodology, we used monolayers of the protein bovine serum albumin, which is a very stable protein and is of great interest in the development of immunosensors. Langmuir-Blodgett (LB) films of this protein, on different solid substrates, were obtained and characterized as a function of pH, surface pressure, temperature, and contact angle. The compressibility modulus, the spreading entropy, and the fraction of desorbed protein sections were used as control parameters to find these conditions. A careful analysis of these parameters shows that there is a window on the values of these experimental parameters in which the LB films are best formed. Our methodology can be applied to other biomacromolecules to find the best conditions to form LB films from isotherm measurements.     

Modulated Fluorescence in LB Films Based on DADQs—A Potential Sensing Surface?

Novel fluorescent Langmuir-Blodgett (LB) films have been constructed from three different amphiphilic dicynaoquinodimethanes (DADQs). The DADQs varied in functional group structure, which had an impact on the LB film structure and the fluorescence properties. As the fluorescence of DADQs competes with non-radiative decay (conformational change), the packing and/or free volume in the LB film will influence the average fluorescence lifetime and integrated intensity. The pristine (blank) LB films were then exposed to a selection of non-fluorescent target analytes (some with environmental relevance) and the fluorescence was measured and analyzed relative to the pristine LB film. Exposure of the LB films to selected target analytes results in a modulation of the fluorescence, both with respect to average fluorescence lifetime and integrated intensity. The modulation of the fluorescence is different for different DADQ LB films and can be attributed to restricted non-radiative decays or charge transfer reactions between target analyte and DADQ LB film. The response from the DADQ LB films shows that these systems can be developed into sensing surfaces based on fluorescence measurements.     

Observation of the anisotropic photoinduced magnetization effect in Co-Fe Prussian blue thin films fabricated by using clay Langmuir-Blodgett films as a template

Thin films of cobalt-iron cyanide (Co-Fe Prussian blue) have been fabricated by means of the modified Langmuir-Blodgett (LB) method using a smectite clay mineral (montmorillonite). In this combined method, clay LB films play a template role in the formation of the Co-Fe Prussian blue thin layer. The films were revealed to possess a well-organized structure not only in perpendicular directions to the film surface but also in parallel directions to the film surface. The photoinduced electron transfer from the iron ion to the cobalt through the bridging cyanide in the films occurred at low temperature (8 K), similar to that in the bulk Co-Fe Prussian blue. The films clearly exhibited magnetic anisotropy with regards to the direction of the applied magnetic field. Moreover, the photoinduced magnetization effect in the films was also found to be anisotropic.