Water sensor using macrobending-sensitive fiber for real-time submersion monitoring

A fast reusable water sensor for long-distance real-time submersion monitoring was fabricated using a macrobending-sensitive fiber (MSF). The proposed water sensor consists of floating matter, periodic macrobending deformers, and a MSF. In this structure, the floating matter moves up and down according to the buoyant force of water, thereby controlling the bending loss of the MSF and allowing the proposed sensor to detect submersion. A basic bending experiment was conducted using a MSF and macrobending deformer, and the results used to fabricate an efficient water sensor. In contrast to existing sensors where the optical loss increases in the case of submersion, the optical loss of the fabricated sensor decreases due to the buoyant force when the selected area is submerged. As such, the fabricated sensor is able to transmit submersion information further than sensors that detect submersion by increasing the optical loss, and it is unaffected by environmental factors, such as humidity and pollutants in the water. The proposed sensor detects submersion by monitoring a 16 dB optical power change of 1550 nm, and the change in the optical power of the fabricated sensor is only affected by the buoyant force. In addition, the proposed water sensor quickly returns to its initial state when the water disappears, and the insertion loss when it is connected to a single-mode fiber (SMF) at both ends using a connector is only −1.2 dB at 1550 nm.     

Field enhancement and power distribution characteristics of subwavelength-diameter terahertz hollow optical fiber

Fields in subwavelength-diameter terahertz hollow optical fiber (STHOF) can be intensified by large discontinuity of the electric field at high index contrast interfaces. The influences of fiber geometry and refractive index of the dielectric region on the fiber characteristics, such as power distribution, enhancement factor, have been discussed in detail. By appropriate design, the intensity in the central region of STHOF may be enhanced by a factor of greater than 1.5 compared with subwavelength-diameter terahertz fiber without the central hole and the loss can be reduced. For its compact structure and simple fabrication process, the fiber may be very useful in many miniaturized high performance and novel terahertz photonic devices.     

Experimental Investigation of Integrated Optical Intensive Impulse Electric Field Sensors

We design and fabricate an integrated optical electric field sensor with segmented electrode for intensive impulse electric field measurement. The integrated optical sensor is based on a Mach-Zehnder interferometer with segmented electrodes. The output/input character of the sensing system is analysed and measured. The maximal detectable electric field range （-75 kV/m to 245kV/m） is obtained by analysing the results. As a result, the integrated optics electric field sensing system is suitable for transient intensive electric field measurement investigation.     

Guideline for the design of a fiber optic distributed temperature and strain sensor

Full analysis of a distributed temperature and strain sensor (DTSS), based on stimulated Brillouin amplification effect in an optical fiber, is given. Some new rules, e.g. optimized launch power, have been found and the optimized design guidelines for short and long distance DTSS are presented.     

Determination of the optimal wavelength for temperature independent detection of commercial gasoline with a polymer cladding optical fiber

An influence of temperature variations on transmission of a polymer cladding silica core (PCS) optical fiber was investigated in a wide spectral range covering the first (1710 nm) and the second (1170 nm) vibrational overtone bands of gasoline absorption. Thermo-induced changes of the fiber background transmittance have strong dependence on wavelength. A narrow wavelength band around 1214 nm was found to be almost free from the thermal effects while maintaining sufficient sensitivity for gasoline detection.     

Optimization of signal-to-noise ratio in integrated planar optical interconnects packages

The signal-to-noise ratio (SNR) of integrated planar optical (IPO) board-to-board interconnections system is analyzed. The SNR is derived as a function of separation between the boards, beam spot size, optical system efficiency, receiver thermal noise, thickness of the substrate, and the angle of propagation of the beam. Based on the analyses and the results obtained it is shown that the design of optical interconnects system can be optimized for maximum SNR using at least one parameter, namely, angle of propagation.     

Solutions of the full- and quasi-vector wave equations based on H-field for optical waveguides by using mapped Galerkin method

The mapped Galerkin method in solving the full-vector and quasi-vector wave equations in terms of transverse magnetic fields (H-formulation) for optical waveguides with step-index profiles is described. By transforming the whole x-y space onto a unit square and using two-dimensional Fourier series expansion, the modal distributions and propagation constants for optical waveguides are obtained in the absence of boundary truncation. Results for step-index circular fiber, buried rectangular waveguide, and optical rib waveguide are presented. Solutions are good agreed with exact solutions and numerical results by using vector nonlinear iterative method, Fourier operator transform method, and vector beam propagation method.     

Analysis and optimization of an InGaAsP/InP waveguide variable optical attenuator

An InGaAsP/InP waveguide variable optical attenuator (VOA) is proposed in this paper. The device consists of straight input and output waveguides and an S-bend waveguide. An electrode is deposited on a portion of the waveguide to form an active region so that its refractive index can be modified by a current injection, resulting in the variation of the transmitted optical power. The beam propagation method is employed in the numerical simulation and the device structure is optimized using a genetic algorithm. The optimized VOA has a low excess loss (<1 dB) and a large dynamic range of about 40 dB.     

Impact of misfit dislocations on wavefront distortion in Si/SiGe/Si optical waveguides

Silicon-rich SiGe alloys represent a promising platform for the development of large-area single-mode optical waveguides to be integrated in silicon-based optical circuits. We find that SiGe layers epitaxially grown on Si successfully guide radiation with a 1.55 μm wavelength, but, beyond a critical core thickness, their optical properties are strongly affected by the clustering of misfit dislocations at the interface between Si and SiGe, leading to a significant perturbation of the local refractive index. Transmission electron microscopy and micro-Raman spectroscopy, together with finite-element simulations, provide a complete analysis of the impact of dislocations on optical propagation.     

New nonlinear and dispersion flattened photonic crystal fiber with low confinement loss

A new nonlinear dispersion flattened photonic crystal fiber with low confinement loss is proposed. This fiber has threefold symmetry core. The doped region in the core and the big air-holes in the 1st ring can make high nonlinearity in the PCF. And the small air-holes in the 1st ring and the radial increasing diameters air-holes rings in cladding can be used to achieve the dispersion properties of the PCF. We can achieve the optimized optical properties by carefully selecting the PCFs structure parameters. A PCF with flattened dispersion is obtained. The dispersion is less than 0.8 ps/(nm km) and is larger than −0.7 ps/(nm km) from 1.515 μm to 1.622 μm. The nonlinear coefficient is about 12.6456 W⁻¹ km⁻¹, the fundamental mode area is about 10.2579 μm². The confinement loss is 0.30641 dB/km. This work may be useful for effective design and fabrication of dispersion flattened photonic crystal fibers with high nonlinearities.     

Analysis of symmetric and asymmetric nanoscale slab slot waveguides

Nanoscale slab slot waveguides provide for high optical confinement and have found abundant applications in silicon photonics. After developing an analytical mode solver for general asymmetric slot waveguides, the confinement performance of symmetric as well as asymmetric geometries was systematically analyzed and compared. For symmetric structures, 2D confinement optimization by varying both low-index slot and high-index slab width revealed a detailed saturation trend of the confinement factor with the increase of the studied width. Furthermore, simple design rules on how to choose the slot and slab width for achieving optimal confinement was obtained. For asymmetric structures, we demonstrated that the confinement performance was always lower than the 2D optimized confinement of the symmetric structures providing the two high-index slab layers and the two cladding layers have same refractive indices, respectively. In addition, the sensitivity of the confinement to the degree of asymmetry was studied, and we found that the fabrication tolerance on the material and structural parameters may be reasonably large for symmetric structures designed at optimal confinement.     

Dispersion measurement technique based on the self-seeding laser oscillation of a Fabry-Perot laser diode

A simple dispersion measurement technique has been proposed and demonstrated by using the self-seeding laser oscillation of a Fabry-Perot laser diode through an optical closed-loop path. When the multi-mode optical pulses emitted from the laser are re-injected into the laser after traversing a fiber-under-test, a single mode laser oscillation occurs through the closed-loop path due to the group velocity difference between the pulses of different wavelengths. We measured the dispersion parameter of the fiber-under-test from the modulation frequency changes required to induce single-mode laser oscillations through the optical closed-loop path. The maximum measurement error was less than 1.5% for the optical fibers as compared with a commercial instrument.     

Millimeter-wave pulse generation based on pulse reshaping using superstructure fiber Bragg grating

A novel optical approach is proposed to generate millimeter wave (MMW) pulse signal based on the pulse reshaping of superstructure fiber Bragg grating (SSFBG). In our scheme, one input pico-second Gaussian pulse is transformed into n Gaussian pulses by the SSFBG reshaping firstly, and then the pulse train is replicated to form a required frequency modulation MMW optical pulse envelope by the linear chirped fiber Bragg grating (LCFBG) or other highly dispersive element. The high-speed photodetector (PD) and band-pass filter can transform the MMW optical pulse into an MMW pulse signal ultimately. Depending on this scheme, MMW signals with frequency up to 10 GHz can be easily generated by the completed fiber components.     

An improved ray approximation method to design the single-mode 3-D optical waveguide

A novel method is developed to analyze a single-mode 3-D optical waveguide based on the ray-approximation method, which we call the improved ray approximation method. The effect of the optical parameters (wavelength, refractive-index and refractive-index difference) on the optimum design is investigated for a strong single-mode 3-D optical waveguide. This is simple and effective for the optimum design of the optical waveguide using the method. This will be helpful for the design of waveguide devices.     

Generalised dispersive phase and its effect on four wave mixing in fibers

A generalised method of calculating the efficiency of four wave mixing products in an optical fiber is presented in this paper. Apart from indicating the insufficiency of the existing theoretical model, this work brings out the importance of calculating the dispersive phase shift more precisely in combination with the nonlinear phase shift to predict the efficiencies of sideband generation. The experimental results for the generation of the first and second order sidebands are analysed. Contrary to expectations, higher powers and longer lengths of fiber do not result in larger number of sidebands. An attempt is made to understand this aspect as well as the experimentally observed fluctuations in the four wave mixing products.     

Widely tunable femtosecond fiber optical parametric oscillator

The phase-matching condition in a fiber is discussed. A balance among the different orders of fiber dispersion can be found to achieve a widely tuning modulation instability gain for pumping around the normal dispersion regime. Three coupled nonlinear wave equations are used to simulate the femtosecond fiber optical parametric oscillator. The numerical results show that, through appropriate choice of dispersion, femtosecond pulses with a 180-nm tunable range can be generated when pump wavelength near a fiber’s zero-dispersion wavelength is tuned only 7 nm. Further tuning is limited by the walk-off between the pump and the signal pulses.     

Residual stress profiles in optical fibers determined by the two-waveplate-compensator method

Stress-induced birefringence impacts the performance of many optical devices. Techniques are needed to measure accurately stress profiles in optical fibers. The two-waveplate-compensator (TWC) method allows the accurate measurement of small retardations. The full-field TWC method is applied here to measure the two-dimensional retardation distribution of single-mode fibers with a spatial resolution of 0.45 μm and a sensitivity of 0.07 nm. Axial stress profiles are hence determined along the axis of the fiber. The stress profiles determined with the TWC method are in good agreement with profiles previously reported in the literature while containing less noise and resolving more details.     

Research on the temperature characteristics of optical fiber refractive index

The delay of optical signal is determined by the refractive index and length of optical fiber, and temperature would have an intense influence on the index. To establish the relationship between refractive index and temperature, the temperature characteristics of refractive index was analyzed and the thermo-optical coefficient equation was derived according to the polarization of the induced electric dipole moment in SiO₂ optical fiber. A measuring system based on optical fiber delay was carried out to measure the index within the temperature range of −30 °C to 70 °C and the experimental result was compared with the theoretical result. The final result shows that the relationship between refractive index and temperature is linear in the temperature range of discussion.     

Measurement of multi-wavelength optical amplifier by using the I/O power-curve fitting technique

A low-cost and accurate measurement scheme for characterizing multi-wavelength optical amplifiers is experimentally demonstrated by using an amplified spontaneous emission source and a DWDM multiplexer. By linearly fitting the input and output optical spectral densities, the gain and noise figure of the optical amplifier are determined. The measured results agree well with the data obtained by time-domain-extinction method.     

Optical and nonlinear optical properties of copper nanocomposite glasses annealed near the glass softening temperature

Copper nanocomposite glasses have been prepared by the ion-exchange method, and annealed at different temperatures up to and above the glass softening temperature. The absorption spectra, fluorescence spectra, and nonlinear optical transmission of the samples at 532 nm for nanosecond laser pulses, have been investigated. The optical and nonlinear optical properties of the glasses are found to be distinctly different below and above the glass softening temperature. For instance, thermal annealing up to the glass softening temperature makes the samples behave like saturable absorbers, while annealing at higher temperatures makes them behave like optical limiters. Such flexibility in controlling the optical nonlinearity in these materials makes them potential candidates for photonic applications.