Effects of vortex pairing on particle dispersion in turbulent shear flows

Particle dispersion in large-scale dominated turbulent shear flow is investigated numerically with special emphasis on the effects of the vortex-pairing phenomenon. The particle dispersion is visualized numerically by following the particle trajectories in a flow consisting of large vortices which are undergoing pairing interaction. The flow field is generated by a discrete vortex method. Important global and local fiow quantities from the numerical simulation compare reasonably well with experimental measurements.

For both cases of point sources with continuous particle release and an initially distributed line source, the particle dispersion results demonstrate that the extent of particle dispersion depends strongly on the Stokes number, the ratio of the particle aerodynamic response time to the characteristic time of the vortex-pairing flow field. Particles with relatively small Stokes numbers disperse laterally at approximately the saine rate as that of the fluid particles and particles with large Stokes numbers disperse much less than the fluid particles. Particles with intermediate Stokes numbers (0.5-5) may be dispersed laterally farther than the fiuid particles and may actually be flung out of the vortex structures. Due to the strong particie entrainment power, the flow during the vortex-pairing process seems to produce higher particle lateral dispersion than the pre-pairing and post-pairing flows.     

可压缩气固混合层中离散相与连续相的相互作用研究

尽管已有许多文献采用数值模拟方法研究两相流问题,但主要是集中不可压流动方面.本文采用Eul-er-Lagrange颗粒-轨道双向耦合模型对时间模式下含有固粒的二维可压缩混合层流动进行了研究.气相流场采用非定常全Navier-Stokes方程描述,并应用具有空间三阶精度的WNND(Weighted Non-Oscillatory, Contai-ning No Free Parameters and Dissipative)格式进行数值高散.固相方程采用二阶单边三点差分离散.在考虑流场对固粒作用的同时,也计及颗粒对流场的反作用.主要研究混合层大尺度涡对颗粒扩散特性的影响及颗粒对流场结构的影响问题.在对流马赫数为0.5时,研究不同Stokes数颗粒在连续流场中的扩散特性,而在对流马赫数为0.8时研究了不同Stokes数颗粒对流场小激波结构的影响.     

NUMERICAL STUDY OF PARTICLE DISTRIBUTION IN WAKE OF LIQUID-PARTICLE FLOWS PAST A CIRCULAR CYLINDER USING DISCRETE VORTEX METHOD

Particle-laden water flows past a circular cylinder were numerically investigated. The discrete vortex method (DVM) was employed to evaluate the unsteady water flow fields and a Lagrangian approach was applied for tracking individual solid particles. A dispersion function was defined to represent the dispersion scale of the particle. The wake vortex patterns, the distributions and the time series of dispersion functions of particles with different Stokes numbers were obtained. Numerical results show that the particle distribution in the wake of the circular cylinder is closely related to the particle's Stokes number and the structure of wake vortices: (1) the intermediate sized particles with Stokes numbers, St, of 0.25, 1.0 and 4.0 can not enter the vortex cores and concentrate near the peripheries of the vortex structures, (2) in the circular cylinder wake, the dispersion intensity of particles decreases as St is increased from 0.25 to 4.0.     

Direct numerical simulation of a particle-laden low Reynolds number turbulent round jet

Direct numerical simulation method is used for the investigating of particle-laden turbulent flows in a spatially evolution of low Reynolds number axisymmetric jet, and the Eulerian–Lagrangian point-particle approach is employed in the simulation. The simulation uses an explicit coupling scheme between particles and the fluid, which considers two-way coupling between the particle and the fluid. The DNS results are compared well with experimental data with equal Reynolds number (R_e = 1700). Our objects are: (i) to investigate the correlation between the particle number density and the fluctuating of fluid streamwise velocity; (ii) to examine whether the three-dimensional vortex structures in the particle-laden jet are the same as that in the free-air jet and how the particles modulate the thee-dimensional vortex structures and turbulence properties with different Stokes number particles; (iii) to discover the particle circumferential dispersion with different Stokes number particles. Our findings: (i) all the particles, regardless of their particle size, tend to preferentially accumulate in the region with large-than-mean fluid streamwise velocity; (ii) the small Stokes number particles take an important part in the modulation of three-dimensional vortex structures, but for the intermediate and larger sized particles, this modulation effect seems not so apparent; (iii) the particle circumferential dispersion is more effective for the smaller and intermediate sized particles, especially for the intermediate sized particles.     

混合层中粒子扩散的实验研究

本文应用流动显示和LDA测量,对混合层中粒子的扩散问题进行了实验研究。结果表明：粒子的扩散强烈地依赖于St数,具有较小St的粒子的扩散近似地与流体示踪粒子相同,随着St的增大,扩散角度增大,也就是说粒子扩散加快,并且随着粒子惯性的增大,它对湍流脉动的响应将会减弱。     

气固两相混合层二维涡配对的数值研究

采用双向耦合模型中的速度耦合模型,数值模拟了气固两相混合层中涡的配对、合并过程,文中采用拟谱方法对流场进行了直接数值模拟,用Lagrange模型跟踪固粒,结果发现,在双向耦合过程中Stokes数仍然是重要的参数,但不是唯一影响流场的参数,流场的发展还与固粒的体积浓度、固粒的相对密度以及固粒大小等因素有关。固粒抑制流场的发展,阻碍涡的配对、合并,加快了涡量的扩散;小St数的固粒仍然跟随流体运动,大St数的固粒趋向于低涡量区的趋势减弱。     

Lagrangian particle dispersion in turbulent flow over a wall mounted obstacle

Large-eddy simulations (LES) of particle-laden turbulent flows are presented in order to investigate the effects of particle response time on the dispersion patterns of a space developing flow with an obstruction, where solid particles are injected inside the wake of an obstacle [Vincont, J.Y., Simoens, S., Ayrault M., Wallace, J.M., 2000. Passive scalar dispersion in a turbulent boundary layer from a line source at the wall and downstream of an obstacle. J. Fluid Mech. 424, 127–167]. The numerical method is based on a fully explicit fractional step approach and finite-differences on Cartesian grids, using the immersed boundary method (IBM) to represent the existence of solid obstacles. Two different turbulence models have been tested, the classical Smagorinsky turbulence model and the filtered structure function model. The dispersed phase was modelled either by an Eulerian approach or a Lagrangian particle tracking scheme of solid particles with Stokes numbers in the range St = 0–25, assuming one-way coupling between the two phases. A very good agreement was observed between the Lagrangian and Eulerian approaches. The effect of particle size was found to significantly differentiate the dispersion pattern for the inhomogeneous flow over the obstacle. Although in homogeneous flows like particle-laden turbulent channels near-wall particle clustering increases monotonically with particle size, for the examined flow over an obstacle, preferential concentration effects were stronger only for an intermediate range of Stokes numbers.     

Predicting transport by Lagrangian coherent structures with a high-order method

Recent developments in identifying Lagrangian coherent structures from finite-time velocity data have provided a theoretical basis for understanding chaotic transport in general flows with aperiodic dependence on time. As these theoretical developments are extended and applied to more complex flows, an accurate and general numerical method for computing these structures is needed to exploit these ideas for engineering applications. We present an unstructured high-order hp/spectral-element method for solving the two-dimensional compressible form of the Navier–Stokes equations. A corresponding high-order particle tracking method is also developed for extracting the Lagrangian coherent structures from the numerically computed velocity fields. Two different techniques are used; the first computes the direct Lyapunov exponent from an unstructured initial particle distribution, providing easier resolution of structures located close to physical boundaries, whereas the second advects a small material line initialized close to a Lagrangian saddle point to delineate these structures. We demonstrate our algorithm on simulations of a bluff-body flow at a Reynolds number of Re = 150 and a Mach number of M = 0.2 with and without flow forcing. We show that, in the unforced flow, periodic vortex shedding is predicted by our numerical simulations that is in stark contrast to the aperiodic flow field in the case with forcing. An analysis of the Lagrangian structures reveals a transport barrier that inhibits cross-wake transport in the unforced flow. The transport barrier is broken with forcing, producing enhanced transport properties by chaotic advection and consequently improved mixing of advected scalars within the wake.     

Numerical simulations of compressible mixing layers with a discontinuous Galerkin method

Discontinuous Galerkin(DG) method is known to have several advantages for flow simulations,in particular,in fiexible accuracy management and adaptability to mesh refinement. In the present work,the DG method is developed for numerical simulations of both temporally and spatially developing mixing layers. For the temporally developing mixing layer,both the instantaneous fiow field and time evolution of momentum thickness agree very well with the previous results. Shocklets are observed at higher convective Mach numbers and the vortex paring manner is changed for high compressibility. For the spatially developing mixing layer,large-scale coherent structures and self-similar behavior for mean profiles are investigated. The instantaneous fiow field for a three-dimensional compressible mixing layer is also reported,which shows the development of largescale coherent structures in the streamwise direction. All numerical results suggest that the DG method is effective in performing accurate numerical simulations for compressible shear fiows.     

Numerical solution of the problem of the mixing of the boundary layers shed from the trailing edge of a wing

During the mixing of viscous incompressible flows with different velocities, in the vicinity of a trailing edge an interaction region with a three-layer structure is formed, similar to that in the case of symmetric shedding with equal velocities. The boundary layers developing on the upper and lower sides of the airfoil form a viscous mixing layer, or vortex sheet, which separates the flows downstream of the trailing edge. The boundary value problem corresponding to the flow in the viscous sublayer in the vicinity of the trailing edge of a flat plate is solved for high Reynolds numbers using an efficient numerical method for solving the equations of asymptotic interaction theory.     

混合层绕流圆柱旋涡脱落的数值研究

对平面混合层绕流圆柱时的旋涡脱落和流动结构进行了数值研究。方法是用一空间、时间三阶精度的有限差分格式解二维不可压Navier-Stokes方程和连续性方程。计算时雷诺数Re取为1000,混合层速度比Ra从0到1,混合层动量厚度θ由0.2到2。     

Particulate Dispersion in a Turbulent Serpentine Channel

Particulate dispersion in an S-shaped duct, with periodicity between inlet and exit, is studied by direct numerical simulation. Stokes numbers range from 0.125 to 6.0. In a straight, turbulent channel flow, eddies are responsible for particulate impact. Turbophoresis causes a mean drift toward the wall. In a curved channel, particle inertia can be the dominant cause of impact. Above the lowest Stokes number, particles form into a plume that leaves the inner bend and flows toward the outer wall. Turbulence then disperses the plume. Heavier particles cross the bend and reflect from the outer wall, forming a high concentration layer near the surface. The heaviest particles reflect again from the wall and are dispersed across the duct by turbulence. An empirical formula is used to analyze the propensity for particle impacts to erode the wall. The region of maximum erosion is not the region of maximum number of impacts, nor is it where the impact velocity is highest: the impact angle determines where erosion is largest.     

稀疏两相湍流的惯性颗粒倾向性弥散

气相采用大涡模拟、颗粒相采用拉格朗日轨道模型的方法对后台阶突扩流、充分发展槽道流和圆湍射流3种典型的稀疏气固两相流动进行了数值模拟,研究了颗粒倾向性弥散的特征和规律. 研究表明颗粒的跟随性和倾向性相联系,颗粒惯性和大涡结构同时决定颗粒的倾向性分布特征. Stokes数量级为1(气相时间参考尺度取为宏观特征时间尺度)左右的颗粒,倾向性分布特征最强烈. 颗粒倾向分布于低涡量(或是低脉动速度)的湍流区域.      

Noise radiated by a non-isothermal,temporal mixing layer. Part I: Direct computation and prediction using compressible DNS

Direct numerical simulations (DNSs) are performed in order to study acoustic emissions generated during the transition of isothermal and non-isothermal mixing layers. The sound from temporally evolving mixing layers is computed directly using DNS for a computational domain, which includes both aerodynamic and acoustic fields. Good precision of the computed acoustic field is ensured by using a numerical code based on high-order finite difference schemes of quasi-spectral accuracy. Two- and three-dimensional simulations of mixing layers are performed for various Mach numbers and temperature ratios. For each case, the acoustic radiation of the mixing layer transition is investigated. Comparisons illustrate the importance of the combined effects of temperature and Mach number on the acoustic intensity. Qualitative agreement with existing experimental observations for hot jet flows is observed. It is also found that the appearance of three-dimensional motion leads to a substantial reduction of sound emissions. In the second part of this study, DNS data are used to perform acoustic analogy predictions. Excellent agreement between direct computations and predictions is obtained in all cases. Analysis of the source terms yields a new interpretation of temperature and Mach number effects, based on the predominance of one term over the other.     

压力梯度对边界层两相流动稳定性的影响

分析了有压力梯度的边界层两相流动稳定性,推导出类似于Saffman理论的修正的稳定性方程,数值计算采用高精度的谱方法。结果说明,压力梯度对边界层两相流动稳定性有显著的影响,顺压梯度增强流动稳定性,而逆压梯度则促进流动失稳。在不同的压力梯度和浓度下,Stokes数对流动稳定性的影响是一致的,存在一个临界Stokes数,小Stokes数促进流动失稳,而大Stokes数则提高临界雷诺数,抑制流动失稳的最佳Stokes数为10的量级。     

The structure and dynamics of reacting plane mixing layers

The reacting two-dimensional plane mixing layer has been studied in two configurations: a rearward facing step and a two-stream mixing layer. Observations have been made of the steady state behavior, and the unsteady behavior when the flow was forced by a specific acoustic frequency. The steady behavior of the mean properties of the reacting flows is similar to that of non-reacting free shear flows except for the global effects of thermodynamic property changes. The structure of these flows is qualitatively similar to that of non-reacting flows. Vortices form by the two-dimensional Kelvin-Helmholtz instability and grow by subharmonic combination until the mixing layer interacts with the walls. Entrainment is dominated by the two-dimensional vortex motion. Three-dimensional instabilities give rise to secondary vortices which are coherent over several Kelvin-Helmholtz structures and dominate the fine scale mixing process. The mixing transition corresponds to a loss of coherence in the layer. Unsteady behavior occurs when there are resonant interactions with the Kelvin-Helmholtz instability or the instability associated with the recirculation vortex in the rearward facing step flow. Modeling efforts are reported which show promise of simulating the essential features of plane mixing layers.A version of this paper was presented at the ASME Winter Annual Meeting of 1984 and printed in AMD-Vol. 66     

混合层流动拟序结构的大涡模拟

采用大涡模拟方法对空间发展的二维平面混合层进行了数值模拟 ,动量方程采用分步投影法求解 ,亚格子项采用标准Smagorinsky亚格子模式模拟 ,压力泊松方程采用修正的循环消去法快速求解 ,同时求解了标志物输运方程以实现数值流场显示。模拟结果给出了混合层流动的瞬态发展过程以及流动中拟序结构的发展演变过程 ,成功地模拟了混合层发展中的各种瞬态细节过程 ,如涡的卷起、增长 ,涡与涡之间的配对、合并过程 ,以及大涡破碎为小涡的级联过程 ,为各种以混合层流动为原型流动的射流、尾流等工业流动的控制和优化提供了理论基础。     

自由剪切湍流中颗粒-拟序结构相互作用研究进展

从实验和数值模拟两方面评述了颗粒-湍流拟序结构相互作用的近期研究进展.关于Stokes数不同对颗粒行为和拟序结构影响的试验研究,从单点激光多普勒测量到粒子图像全场测速,并与流场显示定性方法结合,揭示了不同Stokes数范围颗粒-拟序结构相互作用的规律.基于涡方法、直接数值模拟和大涡模拟等的模拟研究,进一步揭示颗粒-拟序结构的相互耦合作用和外界激励的调制作用等规律,同时推动了算法的发展.      

The AGE method for direct numerical simulation of turbulent shear flow

The advected grid explicit (AGE) method for direct numerical simulation of ‘incompressible’ turbulent shear flows is presented. The Navier–Stokes equations are used for momentum in a velocity–pressure formulation. Mass continuity and an equation of state link pressure with density (which is not assumed identically constant). Time advancement is entirely explicit, and spatial representation is localized (e.g. finite difference) and centred. Magnitudes of non-linear terms are reduced on advected grid(s), and numerical instabilities are efficiently reduced by ‘targeted diffusion’. Computation time scales directly on the number of grid points (virtual memory issues aside), and is very short for a DNS method. A spatially developing two-stream mixing layer was simulated as an example, reaching a vorticity thickness Reynolds number >20 000. Comparison with experimental results from self-similar mixing layers is satisfactory in terms of growth rate and Reynolds stress profiles. Turbulent vortical structures are visualized by means of pressure surfaces. © 1998 John Wiley & Sons, Ltd.     

Turbulent transport of particles in a straight square duct

Turbulent flow through a duct of square cross-section gives rise to off-axis secondary flows, which are known to transfer momentum between fluid layers thereby flattening the velocity profile. The aim of this study is to investigate the role of the secondary flows in the transport and dispersion of particles suspended in a turbulent square duct flow. We have numerically simulated a flow through a square duct having a Reynolds number of Re_τ = 300 through discretization of the Navier–Stokes equations, and followed the trajectories of a large number of passive tracers and finite-inertia particles under a one-way coupling assumption. Snapshots of particle locations and statistics of single-particle and particle pair dispersion were analyzed. It was found that lateral mixing is enhanced for passive tracers and low-inertia particles due to the lateral advective transport that is absent in straight pipe and channels flows. Higher inertia particles accumulate close to the wall, and thus tend to mix more efficiently in the streamwise direction since a large number of the particles spend more time in a region where the mean fluid velocity is small compared to the bulk. Passive tracers tend to remain within the secondary swirling flows, circulating between the core and boundary of the duct.