A Columnar Liquid‐Crystal Phase Formed by Hydrogen‐Bonded Perylene Bisimide J‐Aggregates

A new perylene bisimide (PBI) dye self‐assembles through hydrogen bonds and π–π interactions into J‐aggregates that in turn self‐organize into liquid‐crystalline (LC) columnar hexagonal domains. The PBI cores are organized with the transition dipole moments parallel to the columnar axis, which is an unprecedented structural organization in π‐conjugated columnar liquid crystals. Middle and wide‐angle X‐ray analyses reveal a helical structure consisting of three self‐assembled hydrogen‐bonded PBI strands that constitute a single column of the columnar hexagonal phase. This remarkable assembly mode for columnar liquid crystals may afford new anisotropic LC materials for applications in photonics.     

Quantum well/columnar discotic hybrids

Theory predicts that the deposition of a nanostructured dielectric film on the surface of a semiconductor quantum well will modulate its optical properties due to interactions between the quantum well exciton and the dielectric structure. We have chosen a columnar discotic triphenylene as dielectric medium since the columnar structure is able to provide spatial, and thus dielectric, modulations both on a 2 or a 0.4 nm scale, depending on the columnar orientation within the film. Film deposition on quantum well structures and model substrates by spincoating and via the vapour phase, in combination with annealing steps, gave rise to a rich spectrum of textural modifications and columnar orientations in the dielectric films. The investigations revealed significant modulations of the optical properties of the quantum well as a function of the textures and the columnar orientational order.     

Pressure effects in a plastic columnar discotic triphenylene

The effect of hydrostatic pressure on the structure of a plastic columnar discotic triphenylene has been investigated. The goal was to determine whether pressure can be used to modify electronic properties via changes in structural properties of columnar discotics to any significant extent. The findings are that (i) the intra‐ and inter‐columnar distances are reduced in a nearly isotropic fashion, (ii) that the crystal sizes are reduced and (iii) that a transition takes place from a more highly ordered plastic columnar to a less ordered hexagonal columnar state with increasing pressure. The induced decrease of the molecular distances, amounting to 6% for pressures up to 17?kbar, are clearly too small to induce an appreciable modification of the electronic structure and thus opto‐electronic properties.     

Quantum well/columnar discotic hybrids

Theory predicts that the deposition of a nanostructured dielectric film on the surface of a semiconductor quantum well will modulate its optical properties due to interactions between the quantum well exciton and the dielectric structure. We have chosen a columnar discotic triphenylene as dielectric medium since the columnar structure is able to provide spatial, and thus dielectric, modulations both on a 2 or a 0.4 nm scale, depending on the columnar orientation within the film. Film deposition on quantum well structures and model substrates by spincoating and via the vapour phase, in combination with annealing steps, gave rise to a rich spectrum of textural modifications and columnar orientations in the dielectric films. The investigations revealed significant modulations of the optical properties of the quantum well as a function of the textures and the columnar orientational order.     

Liquid crystalline oligomers derived from cholesterol: synthesis and columnar mesomorphism

The novel columnar liquid crystals based on symmetric hairpin-shaped cholesterol tetramers bridged by rigid or hydrogen-bonding Schiff-base spacers were prepared by reacting cholesterol dimer with phenylenediamines or dihydrazides in yields of 70–85%. Structural characterisation of these new compounds had been achieved by infrared, nuclear magnetic resonance and mass spectrometry. Their mesomorphic properties were investigated by polarising optical microscopy, differential scanning calorimetry and X-ray diffraction. They exhibited good hexagonal columnar mesophase with three molecules in a disc of the columnar hexagonal state. This study implied that the symmetric cholesterol tetramers with rigid cores or hydrogen-bonding cores prefer to columnar mesophase.     

Structure formation in doped discotic polymers and low molar mass model systems

Doping of low molar mass materials or polymers, possessing disc-like units, with electron acceptors leads to the stabilization of columnar discotic phases or even to the induction of such phases in compounds which either display a nematic discotic phase or only an amorphous phase in the absence of the electron acceptor. The induced columnar phase corresponds frequently to a hexagonally ordered one. We have observed, however, in addition the induction of new columnar phases such as the rectangularly ordered (D^ro) and the columnar nematic phase (N^c). The enhancement of the tendency towards the formation of columnar phases is a consequence of electron acceptor—electron donor complex formation. Using a model proposed by de Jeu to describe the induction of smectic phases by complex formation we are able to account qualitatively for the experimental findings.     

聚乙二醇辅助合成氧化镁及其处理含铅溶液的性能

以聚乙二醇（PEG-10000）辅助,在室温（25℃）-F由MgCl2-6H2O与Na2CO3通过层一层自组装制备出具有六棱柱状形貌的MgO,并以其对含铅溶液的吸附为探针反应,研究其对重金属离子的吸附性能．研究结果表明,所制备氧化镁的前驱体为MgCO3·3H2O;经600℃焙烧得到的六棱柱状MgO比表面积大于55m^2／g,具有良好的吸附性能;对含铅溶液的吸附过程符合Langmuir等温吸附,饱和吸附量达到390mg／g．     

Synthesis and mesomorphic properties of calix[4]resorcinarene–triphenylene oligomers

By controlling the mol ratios of reactants, novel calix[4]resorcinarene–triphenylene monomer, dimer and tetramer were designed and synthesised in yields of 50–60% via Click chemistry. Their structures were characterised by NMR and MS. Their liquid crystalline behaviours were studied by differential scanning calorimetry, polarising optical microscopy and X-ray diffraction analysis. The more triphenylene units on calix[4]resorcinarene resulted in the wider temperature scopes of mesophase and higher phase transition temperatures. The monomer 6 and dimer 7 showed the mixed columnar mesophase with hexagonal columnar structure and disordered lamellar columnar structure, and compound 8 possessed only disordered lamellar columnar mesophase. These research results suggest that calix[4]resorcinarene was a good platform to construct columnar liquid crystal and the mesomorphic properties were greatly influenced by the substituted numbers of mesogen units on calix skeleton.     

Columnar and interdigitated structures from apolar discotic mesogens with radial dipoles: a Monte Carlo study

We have simulated, using a Monte Carlo method, a system of apolar Gay-Berne discotic particles without dipoles and with two or three dipoles symmetrically embedded in the disc. The dipoleless system can form nematic and hexagonal columnar mesophases. Adding two in-plane antiparallel radial dipoles has the effect of destabilizing the columnar ordering, in favour of a fully interdigitated arrangement of the molecular stacks, with strong correlations in the plane perpendicular to the director and large biaxiality. No columnar phase is observed for the systems with three planar radial dipoles with threefold symmetry up to very low temperatures. Finally, on decreasing the strength of the three dipoles, a columnar non-interdigitated phase is observed.     

Growth of columnar hydrogel colloidal crystals in water-organic solvent mixture

A novel emulsion method has been demonstrated to grow columnar hydrogel colloidal crystals by mixing an aqueous suspension of poly-N-isopropylacrylamide-co-allylamine microgels with organic solvent, driven by the coalescence of micelles consisting of organic oil droplets coated by many microgels. This method leads to microgel colloidal crystals of several centimeters growing from the top to the bottom along the gravity direction. Both temperature and polymer concentration play critical roles for the formation of columnar crystals. A phase diagram has been determined, and it can be used as a guide to selectively grow different crystals, including columnar crystals and randomly oriented crystals, and enable the coexistence of columnar crystals and randomly oriented crystals.     

A carbohydrate with a rectangular columnar phase

Carbohydrate dithioacetals are known to give hexagonal disordered columnar phases, but for the carbohydrate dithioacetals reported here, a new rectangular columnar phase has been found.     

Pressure effects in a plastic columnar discotic triphenylene

The effect of hydrostatic pressure on the structure of a plastic columnar discotic triphenylene has been investigated. The goal was to determine whether pressure can be used to modify electronic properties via changes in structural properties of columnar discotics to any significant extent. The findings are that (i) the intra- and inter-columnar distances are reduced in a nearly isotropic fashion, (ii) that the crystal sizes are reduced and (iii) that a transition takes place from a more highly ordered plastic columnar to a less ordered hexagonal columnar state with increasing pressure. The induced decrease of the molecular distances, amounting to 6% for pressures up to 17 kbar, are clearly too small to induce an appreciable modification of the electronic structure and thus opto-electronic properties.     

Columnar liquid crystalline pi-conjugated oligothiophenes

Polycatenar oligothiophenes possessing three alkoxy chains at each terminal self-organise into columnar liquid crystalline phases, and one-dimensional columnar stacks can be oriented uniaxially by mechanical shearing in the mesophases.     

Molecular modeling of liquid crystalline self-organization of fullerodendrimers: columnar to lamellar phase transitions driven by temperature and/or concentration changes

The molecular cubic-block model [ J. Chem. Phys. 2005, 123, 164904 ] is used to study a class of poly(benzyl ether) fullerodendrimers that have recently been reported to form columnar liquid crystal phases. In agreement with experiment, the model-molecules are found to self-assemble into columns which form hexagonal or rectangular lattices. The columnar cross sections are elongated in the rectangular phase. Transitions to the isotropic phase, either directly or through the intermediate formation of smectic phases, have been found. The effects of dissolving small amounts of nonbonded fullerene molecules have been explored. The results predict that the fullerene solutes restrict the range of stability of the columnar phase and may induce transitions from the columnar to the smectic or the isotropic phase.     

Star-shaped oligobenzoates: non-conventional mesogens forming columnar helical mesophases

Star-shaped mesogens with a phloroglucinol or a trimesic acid core and oligobenzoate arms with up to five repeating units have been synthesised. These non-conventional mesogens form various columnar mesophases over a broad temperature range. The liquid-crystal phases were characterised by optical microscopy, differential scanning calorimetry, X-ray diffraction, dilatometry and solid-state NMR spectroscopy. In addition to the high-temperature hexagonal columnar phases, the columnar self-assemblies undulate upon cooling and consequently form higher-ordered body-centred orthorhombic columnar 3D structures. A model of E-shaped folded conformers helically displaced along the columns is proposed. Helical preorganisation in the hexagonal phase precedes the transition to the low-temperature phases. Space filling and nano-segregation compete in the self-organisation process, thus aliphatic chains and the polar oligobenzoate scaffold are not perfectly separated in these star-shaped mesogens.     

One-dimensional ion-conductive polymer films: alignment and fixation of ionic channels formed by self-organization of polymerizable columnar liquid crystals

We have prepared two types of one-dimensional ion-conductive polymer films containing ion nanochannels that are both perpendicular and parallel to the film surface. These films have been obtained by photopolymerization of aligned columnar liquid crystals of a fan-shaped imidazolium salt having acrylate groups at the periphery. In the columnar structure, the ionic part self-assembles into the inner part of the column. The column is oriented macroscopically in two directions by different methods: orientation perpendicular to the modified surfaces of glass and indium tin oxide with 3-(aminopropyl)triethoxysilane and orientation parallel to a glass surface by mechanical shearing. Ionic conductivities have been measured for the films with columnar orientation vertical and parallel to the surface. Anisotropic ionic conductivities are observed for the oriented films fixed by photopolymerization. The ionic conductivities parallel to the columnar axis are higher than those perpendicular to the columnar axis because the lipophilic part functions as an ion-insulating part. The film with the columns oriented vertically to the surface shows an anisotropy of ionic conductivities higher than that of the film with the columns aligned parallel to the surface.     

Mesomorphic phase transition behavior of novel triphenylene compounds possessing fluoroalkylated side chains

This report discusses the effect of fluoroalkyl chain on the mesomorphism. Several homologues of novel triphenylene compounds possessing fluoroalkylated side chains were synthesized. Studies of X-ray diffraction, DSC and texture observations by polarized microscope revealed that these homologues show hexagonal columnar (Col_h) mesophase. These homologues made columnar mesophase stabilize and the melting point increase, as compared with corresponding alkyloxytriphenylenes. In the case of fluoroalkyloxytriphenylenes possessing fluoromethylene side chains, the increase of the fluoromethylene chain length stabilized columnar mesophase, made the phase transition enthalpy (Col_h-Iso) and entropy (Col_h-Iso) increase. It is considered that these results are due to the fluorophilic interaction, and that the fluorophilic interaction is important for stabilizing columnar mesophase.     

Effect of Film Thickness on the Columnar Packing Structures of Discotic Supramolecules in Thin Films

The effects of film thickness on the columnar packing structure of discotic supramolecules in a thin supported film have been investigated by grazing‐incidence small‐angle X‐ray scattering technique using magnetically aligned cobalt octa(n‐decylthio)porphyrazine (CoS10) films on octadecyltrichlorosilane (OTS)‐functionalized substrates as model systems. Magnetically aligned CoS10 films with a range of film thicknesses (49–845 nm) form uniaxially oriented ‘edge‐on’ columnar superstructures with their columnar directors perpendicular to the applied magnetic field. However, the orientational ordering of the columnar packing in the plane perpendicular to the applied magnetic field is strongly dependent on the film thickness. While being damped by the elasticity of the side chains of CoS10, the strong interfacial interaction at the film‐substrate interface propagates up to 50–100 nm from the substrate, maintaining the orientation of columnar packing in the plane perpendicular to the applied magnetic field. When the distance from the film‐substrate interface becomes larger than about 100 nm, symmetric tilting of columnar layer orientation, which saturates at 11.5°, occurs due to longitudinal edge dislocations induced by accumulated elastic deformation.     

Functional Columnar Liquid Crystalline Phases From Ionic Complexes of Dendronized Polymers and Sulfate Alkyl Tails

We describe how cationic dendronized polymers of generations 1, and 2 and anionic monoalkyl tails can be combined by supramolecular ionic complexation into comb-like liquid crystalline polymers. The final structures in bulk of these supramolecular complexes were studied by differential scanning calorimetry (DSC), cross-polarized optical microscopy (CPOM), small angle x-rays scattering (SAXS) and transmission electron microscopy (TEM). The combination of these techniques allowed elucidating (i) that these complexes exhibit thermotropic behaviour, (ii) that various liquid crystalline structures in the 3–5 nm length scale can be obtained such as columnar rectangular, columnar tetragonal, columnar hexagonal and lamellar, depending both on alkyl tail length and polymer generation, (iii) that although the alkyl tails represent the majority phase in the columnar phases, they form the cylindric domains, and the dendronized polymers occupy the continuous domains. Therefore, upon selective cleavage of the alkyl tails in the columnar phases, the present self-assembly approach may constitute an efficient strategy towards the formation of porous organic matrices with ultra-dense pore size in the range of 2 to 4 nm.     

Heterocyclic columnar hexacatenar bisthiazoles

Three new series of hexacatenar liquid crystals derived from heterocyclic bisthiazoles and bisoxazoles exhibiting columnar phases were reported, and the formation of columnar phases was strongly sensitive to central heteroatoms and/or their positions incorporated.