A mild and efficient copper-catalyzed coupling of aryl iodides and thiols using an oxime-phosphine oxide ligand

A mild and efficient copper-catalyzed system for the coupling of aryl iodides and thiols was developed using a readily prepared and highly stable oxime-phosphine oxide ligand. Good to excellent yields were obtained.     

Highly efficient synthesis of phenols by copper-catalyzed hydroxylation of aryl iodides, bromides, and chlorides

8-Hydroxyquinolin-N-oxide was found to be a very efficient ligand for the copper-catalyzed hydroxylation of aryl iodides, aryl bromides, or aryl chlorides under mild reaction conditions. This methodology provides a direct transformation of aryl halides to phenols and to alkyl aryl ethers. The inexpensive catalytic system showed great functional group tolerance and excellent selectivity.     

Palladium-catalyzed cross-coupling reactions of (2-pyridyl)allyldimethylsilanes with aryl iodides

[reaction: see text] (2-Pyridyl)allyldimethylsilanes were found to be novel pyridyl transfer reagents in palladium-catalyzed cross-coupling reactions of various aryl iodides in the presence of silver(I) oxide as an activator.     

Using a tripod as a chiral chelating ligand: chemical exchange between equivalent molecular structures in palladium catalysis with 1,1,1-tris(oxazolinyl)ethane ("trisox")

Threefold symmetrical chiral podands may simplify the stereochemistry of key catalytic intermediates for cases in which they only act as bidentate ligands. This applies to systems in which chemical exchange between the different kappa2-coordinated forms takes place and in which the non-coordinated sidearm may play a direct or indirect role at some earlier or later stage in the catalytic cycle. Palladium(II)-catalysed allylic substitutions provide appropriate test reactions along these lines. A series of neutral dichloropalladium(II) complexes, [PdCl2(iPr-trisox)] (1a), [PdCl2(Ph-trisox)] (1b), [PdCl2(Bn-trisox)] (1c) and [PdCl2(Ind-trisox)] (1d) (trisox=1,1,1-tris(oxazolinyl)ethane) were synthesised by reaction of the respective trisox derivative with [PdCl2(PhCN)2] and characterised inter alia by 15N NMR spectroscopy. Direct detection of the heteronuclei without isotope enrichment and with "normal" sample concentrations was achieved with the aid of a cryogenically cooled NMR probe on a 600 MHz NMR spectrometer. Whereas the 15N nuclei of the coordinated oxazoline rings resonate at delta=160-167 ppm and appear as two singlets due to their diastereotopicity, the signal assigned to the dangling oxazoline "arm" is observed at delta=238-240 ppm. Variable-temperature NMR studies along with a systematic series of magnetisation transfer experiments established exchange between ligating and non-ligating oxazoline rings. Reaction of [Pd(allyl)(cod)]BF4 (cod=cyclooctadiene) with Ph-trisox in CH(2)Cl(2) gave the corresponding allyl complex 2, for which fast exchange between the three oxazoline heterocycles as well as between the exo and endo diastereomers was observed along with a very slow eta3-eta1-eta3 process of the allyl fragment (magnetisation transfer). Palladium(0) complexes were prepared by reaction of trisox derivatives or sidearm-functionalised BOX (BOX=bis(oxazolinyl)dimethylmethane) ligands with [Pd(nbd)(alkene)] (nbd=norbornadiene, alkene=maleic anhydride or tetracyanoethylene). X-ray diffraction studies of the iPr-trisox and Ph-trisox complexes (3a and 3b) established Y-shaped trigonal planar coordination geometries with the trisox ligand coordinated in a bidentate fashion, whilst the pi-coordinated maleic anhydride ligand adopts one of the two possible diastereotopic orientations. As the catalytic test reaction, the allylic alkylation of 1,3-diphenylprop-2-enyl acetate substrate with dimethyl malonate as nucleophile (in the presence of N,O-bis(trimethylsilyl)acetamide) was investigated for the trisox derivatives, their BOX analogues, and a series of less symmetric "sidearm" functionalised bisoxazolines. The trisoxazoline-based catalysts generally induce a better enantioselectivity compared to their bisoxazoline analogues and display significant reduction of the induction period as well as rate enhancement.     

A new method for aromatic difluoromethylation: copper-catalyzed cross-coupling and decarboxylation sequence from aryl iodides

A new methodology for aromatic difluoromethylation is described. Aryl iodides reacted with α-silyldifluoroacetates upon treatment with copper catalyst in DMSO or DME to give the corresponding aryldifluoroacetates in moderate to good yields. The subsequent hydrolysis of aryldifluoroacetates and KF-promoted decarboxylation afforded a variety of difluoromethyl aromatics.     

2-(Trimethylsilyl)ethanol as a new alcohol equivalent for copper-catalyzed coupling of aryl iodides

2-(Trimethylsilyl)ethanol as a new alcohol equivalent has been employed for copper-catalyzed coupling of aryl iodides. Using mild reaction conditions, it has been observed that substituted phenols and phenols with sensitive functional groups can be readily prepared.     

Indium(III) chloride as a new, highly efficient, and versatile catalyst for acylation of phenols, thiols, alcohols, and amines

Indium(III) chloride efficiently catalyses the acylation of structurally diverse phenols, alcohols, thiols, and amines under solvent free conditions. Acid sensitive alcohols are smoothly acylated without competitive side reactions. Acylation of 2-hydroxynaphthalene is carried out with carboxylic acids adopting the mixed anhydride protocol using trifluoroacetic anhydride.     

Catechol violet as new, efficient, and versatile ligand for Cu(I)-catalyzed C-S coupling reactions

Combination of CuI and Catechol violet (CuI-CV) was employed as catalyst for the first time in the C-S coupling reaction of a wide variety of aromatic halides, such as aryl iodides, bromo pyridines, activated aryl chlorides, and vinyl iodide with thiols to afford the corresponding thioethers in good to excellent yields. Broad range of functional group tolerance present in both the coupling partners has been observed in this reaction protocol.     

Efficient ligand-free copper-catalyzed C-S cross-coupling of thiols with aryl iodides using KF/Al2O3 as base

We report a mild, convenient, environmentally friendly, and ligand-free synthetic protocol for the cross-coupling reaction of aryl iodides and thiols using 10 mol % CuI with KF/Al₂O₃ as the base, in DMF at 110 °C. Using this protocol, we have shown that a variety of aryl sulfides can be synthesized in excellent yields from readily available iodides and thiols.     

Tetrazole-1-acetic acid as a ligand for copper-catalyzed N-arylation of imidazoles with aryl iodides under mild conditions

Tetrazole-1-acetic acid was found to serve as a superior ligand for CuI-catalyzed N-arylation of imidazoles with aryl iodides under a low catalyst loading (5 mol% of CuI). A variety of aryl iodides could be aminated to provide the N-arylated products in good to excellent yields without the need of an inert atmosphere.     

Triphenylphosphine as a ligand for room-temperature Ni(0)-catalyzed cross-coupling reactions of aryl chlorides with arylboronic acids

Room-temperature Ni(0)-catalyzed cross-coupling reactions of deactivated aryl chlorides with arylboronic acids with inexpensive triphenylphosphine (PPh3) as a supporting ligand have been accomplished in good to excellent yields. Air-stable Ni(PPh3)2Cl2 has also been established as catalyst precursor, and highly active nickel catalysts were obtained when the reduction of Ni(PPh3)2Cl2 with n-BuLi was carried out in the presence of an aryl chloride.     

Xantphos as an efficient ligand for palladium-catalyzed cross-coupling reactions of aryl bromides and triflates with allyl acetates and indium

Xantphos was found to be an efficient ligand for palladium-catalyzed allyl cross-coupling reactions of aryl bromides and triflates with allylindium reagents generated in situ from allyl acetates and indium. These reactions occur in high yield with good functional group tolerance.     

Simple, efficient and recyclable catalytic system for performing copper-catalyzed C-S coupling of thiols with aryl iodides in PEG and PEG-H2O

A new protocol for the coupling of aryl iodides with thiophenols or alkanethiols is reported. The reaction is catalyzed by CuI-PEG or CuI-PEG-H₂O system in the absence of ligands and volatile organic solvents. A variety of functionalized aryl sulfides are prepared in excellent yields. The isolation of the products is readily performed by the extraction with diethyl ether or petroleum ether, and the CuI-PEG catalyst can be reused without significant loss in activity. The simple catalytic system is economically competitive and environmentally friendly.     

Oxime palladacycle in PEG as a highly efficient and recyclable catalytic system for phenoxycarbonylation of aryl iodides with phenols

In this report, we have developed a sustainable protocol for the synthesis of aromatic esters by a carbonylative method using di‐μ‐chlorobis [5‐hydroxy‐2‐[1‐(hydroxyimino‐?N) ethyl] phenyl‐?C] palladium (II) dimer ( 1 ) catalyst in PEG‐400 as a greener and recyclable solvent. The reaction is carried out at room temperature using CO in a balloon. Good to excellent yield of various esters can be synthesize using this protocol. Direct insertion of CO moiety leads to the high atom and step economy. Compared to previous protocol this phosphine free approach for the synthesis of aromatic esters provides high Turnover Number (TON) and Turnover Frequency (TOF). Developed approach has an alternative route for use of conventional palladium precursor with high conversion and selectivity. The catalyst system and product can easily be separated using diethyl ether as a solvent. The Pd/PEG‐400 system could be reused up to a fifth consecutive cycle without any loss of its activity and selectivity.     

Stereospecific cross-coupling of alpha-(thiocarbamoyl)organostannanes with alkenyl, aryl, and heteroaryl iodides

Racemic and scalemic PTC-protected alpha-hydroxystannanes cross-couple with alkenyl/aryl/heteroaryl iodides in moderate to good yields using copper(I) thiophene-2-carboxylate (CuTC) in THF at or below room temperature. Simple aryl iodides and 1-iodocyclohexene, two classes of electrophiles that typically react sluggishly, are also good substrates. Cross-couplings proceed with retention of configuration at the alkenyl- and stannyl-substituted stereocenters.     

A general,efficient, and inexpensive catalyst system for the coupling of aryl iodides and thiols

An efficient copper-catalyzed carbon-sulfur bond formation reaction was developed. This method is particularly noteworthy given its experimental simplicity, high generality, and exceptional level of functional group toleration and the low cost of the catalyst system. [reaction: see text]     

Perchloric acid adsorbed on silica gel as a new,highly efficient,and versatile catalyst for acetylation of phenols,thiols, alcohols,and amines

Perchloric acid adsorbed on silica gel efficiently catalyses acetylation of structurally diverse phenols, alcohols, thiols, and amines under solvent free conditions.     

Application of a new bicyclic triaminophosphine ligand in Pd-catalyzed Buchwald-Hartwig amination reactions of aryl chlorides, bromides, and iodides

The new bicyclic triaminophosphine ligand P(i-BuNCH2)3CMe (3) has been synthesized in three steps from commercially available materials and its efficacy in palladium-catalyzed reactions of aryl halides with an array of amines has been demonstrated. Electron-poor, electron-neutral, and electron-rich aryl bromides, chlorides, and iodides participated in the process. The reactions encompassed aromatic amines (primary or secondary) and secondary amines (cyclic or acyclic). It has also been shown that the weak base Cs2CO3 can be employed with ligand 3, allowing a variety of functionalized substrates (e.g., those containing esters and nitro groups) to be utilized in our amination protocols. This ligand provides a remarkably general, efficient, and mild palladium catalyst for aryl iodide amination. Although 3 is slightly air and moisture sensitive, easy procedures can be adopted that avoid the need of a glovebox. Comparisons of the efficacy of 3 in these reactions with that of the proazaphosphatrane P(i-BuNCH2CH2)3N (2) reveal that in addition to the opportunity for transannulation in 2 (but not in 3), other significant stereoelectronic contrasts exist between these two ligands which help account for differences in the activities of the Pd/2 and Pd/3 catalytic systems.     

2-aminopyrimidine-4,6-diol as an efficient ligand for solvent-free copper-catalyzed N-arylations of imidazoles with aryl and heteroaryl halides

Efficient and solvent-free copper-catalyzed N-arylations of imidazoles with aryl and heteroaryl halides have been demonstrated. In the presence of CuBr, 2-aminopyrimidine-4,6-diol, and TBAF (n-Bu4NF), a variety of imidazoles underwent the N-arylation reaction with aryl and heteroaryl halides smoothly in moderate to excellent yields. Noteworthy is that the reaction is conducted under solvent-free conditions.