Structure-relationships in electrocatalysis: oxygen reduction and hydrogen oxidation reactions on Pt(111) and Pt(100) in solutions containing chloride ions

Kinetics of the oxygen reduction reaction (orr) and the hydrogen evolution–oxidation reactions (her/hor) were studied on the Pt(111) and Pt(100) surfaces in 0.05 M H₂SO₄ containing Cl⁻. The orr is strongly inhibited on the (100) surface modified by adsorbed Cl⁻ (Cl_ad), and it occurs as a 3.5e⁻ reduction via solution phase peroxide formation. In the hydrogen adsorption (H_upd) potential region, the orr is even more inhibited, and corresponds only to a 2 e⁻ reduction at the negative potential limit where the electrode is covered by one monolayer of H_upd and some (unknown) amount of Cl_ad. On the Pt(111)---Cl_ad surface, the orr is inhibited relatively little (in addition to that caused by strong bisulfate anion adsorption on this surface), and the reaction pathway is the same as in Cl⁻ free solution. The kinetics of the hor on Pt(111) are the same in pure solution and in a solution containing Cl⁻, since Cl_ad does not affect platinum sites required for the breaking of the H---H bond. A relatively large inhibition of the hor is observed on the (100) surface, implying that strongly adsorbed Cl_ad is present on the surface even near 0 V.     

Enhanced activity for ethanol electrooxidation on Pt–MgO/C catalysts

MgO promoted Pt/C electrocatalysts were rapidly prepared by intermittent microwave heating method and characterized using different techniques. Electrooxidation of ethanol on MgO promoted Pt/C catalysts in alkaline media was studied. Such electrocatalysts are superior to pure Pt electrocatalysts. The influence of the amount of MgO in the catalysts on catalytic activity for ethanol oxidation was tested. The electrode with a weight ratio of Pt to MgO of 4:1 showed the highest electrocatalytic activity for ethanol oxidation. The presence of MgO in the electrocatalysts improved the kinetic processes, giving the exchange current density for ethanol oxidation of 1.8 × 10⁻⁵ A cm⁻² on Pt–MgO/C instead of 3.3 × 10⁻⁷ A cm⁻² on Pt/C.     

Voltammetric studies on the α-tocopherol anion and α-tocopheroxyl (Vitamin E) radical in acetonitrile

The α-tocopheroxyl radical was generated voltammetrically by one-electron oxidation of the α-tocopherol anion (E ^r_1/2=−0.73 V versus Ag|Ag⁺) that was prepared by reacting α-tocopherol with Et₄NOH in acetonitrile (with Bu₄NPF₆ as the supporting electrolyte). Cyclic voltammograms recorded at variable scan rates (0.05–10 V s⁻¹), temperatures (−20 to 20°C) and concentrations (0.5–10 mM) were modelled using digital simulation techniques to determine the rate of bimolecular self-reaction of α-tocopheroxyl radicals. The k values were calculated to be 3×10³ l mol⁻¹ s⁻¹ at 20°C, 2×10³ l mol⁻¹ s⁻¹ at 0°C and 1.2×10³ l mol⁻¹ s⁻¹ at −20°C. In situ electrochemical-EPR experiments performed at a channel electrode confirmed the existence of the α-tocopheroxyl radical.     

Electrocatalytic Oxidation and Direct Determination of L-Tyrosine by Square Wave Voltammetry at Multi-wall Carbon Nanotubes Modified Glassy Carbon Electrodes

The electrochemical behavior of L-tyrosine was investigated at a multi-wall carbon nanotubes modified glassy carbon electrode. L-tyrosine itself showed a poor electrochemical response at the bare glassy carbon electrode; however, a multi-wall carbon nanotubes film fabricated on the glassy carbon electrode can directly enhance the electrochemical signal of L-tyrosine when applying cyclic voltammetry and square wave stripping voltammetry without any mediator. Cyclic voltammetry was carried out to study the electrochemical oxidation mechanism of L-tyrosine, which shows a totally irreversible process and an oxidation potential of 671 mV at the modified electrode and 728 mV at the bare electrode, ΔE_p = 57 mV. The anodic peak current linearly increases with the square root of scan rate in the low range, suggesting that the oxidation of L-tyrosine on the multi-wall carbon nanotubes modified electrode is a diffusion-controlled process. The square wave stripping voltammetry currents of L-tyrosine at the multi-wall carbon nanotubes modified electrodes increased linearly with the concentration in the range of 2.0 × 10⁻⁶–5.0 × 10⁻⁴ mol L⁻¹. The detection limit was 4.0 × 10⁻⁷ mol L⁻¹. The method is simple, quick, sensitive and accurate.     

Simultaneous determination of gibberellic acid, indole-3-acetic acid and abscisic acid in wheat extracts by solid-phase extraction and liquid chromatography-electrospray tandem mass spectrometry

A liquid chromatography–tandem mass spectrometry (LC–MS/MS) method was developed for simultaneous determination of three representative phytohormones in plant samples: gibberellic acid (GA₃), indole-3-acetic acid (IAA) and abscisic acid (ABA). A solid-phase extraction (SPE) pretreatment method was used to concentrate and purify the three phytohormones of different groups from plant samples. The separation was carried out on a C₁₈ reversed-phase column, using methanol/water containing 0.2% formic acid (50:50, v/v) as the isocratic mobile phase at the flow-rate of 1.0 mL min⁻¹, and the three phytohormones were eluted within 7 min. A linear ion trap mass spectrometer equipped with electrospray ionization source was operated in negative ion mode. Selective reaction monitoring (SRM) was employed for quantitative measurement. The SRM transitions monitored were as 345 → 239, 301 for GA₃, 174 → 130 for IAA and 263 → 153, 219 for ABA. Good linearities were found within the ranges of 5–200 μg mL⁻¹ for IAA and 0.005–10 μg mL⁻¹ for ABA and GA₃. Their detection limits based on a signal-to-noise ratio of three were 0.005 μg mL⁻¹, 2.2 μg mL⁻¹ and 0.003 μg mL⁻¹ for GA₃, IAA and ABA, respectively. Good recoveries from 95.5% to 102.4% for the three phytohormones were obtained. The results demonstrated that the SPE-LC–MS/MS method developed is highly effective for analyzing trace amounts of the three phytohormones in plant samples.     

Dinitrogen and carbon monoxide hydrogen bonding in protonic zeolites: Studies from variable-temperature infrared spectroscopy

Adsorption (at a low temperature) of nitrogen on the protonic zeolite H-Y results in hydrogen bonding of the adsorbed N₂ molecules with the zeolite Si(OH)Al Brønsted-acid groups. This hydrogen-bonding interaction leads to activation, in the infrared, of the fundamental N–N stretching mode, which appears at 2334 cm⁻¹. From infrared spectra taken over a temperature range, the standard enthalpy of formation of the OH···N₂ complex was found to be ΔH⁰ = −15.7(±1) kJ mol⁻¹. Similarly, variable-temperature infrared spectroscopy was used to determine the standard enthalpy change involved in formation of H-bonded CO complexes for CO adsorbed on the zeolites H-ZSM-5 and H-FER; the corresponding values of ΔH⁰ were found to be −29.4(±1) and −28.4(±1) kJ mol⁻¹, respectively. The whole set of results was analysed in the context of other relevant data available in the literature.     

Homogeneous liquid-liquid extraction combined with gas chromatography-electron capture detector for the determination of three pesticide residues in soils

In this study, a new method was developed for analyzing malathion, cypermethrin and lambda-cyhalothrin from soil samples by using homogeneous liquid–liquid extraction (HLLE) and gas chromatography with electron capture detector (GC–ECD). Acetone was used as extraction solvent for the extraction of target pesticides from soil samples. When the extraction process was finished, the target analytes in the extraction solvent were rapidly transferred from the acetone extract to carbon tetrachloride, using HLLE. Under the optimum conditions, linearity was obtained in the range of 0.05–40 μg kg⁻¹ for malathion, 0.04–10 μg kg⁻¹ for lambda-cyhalothrin and 0.05–50 μg kg⁻¹ for cypermethrin, respectively. Coefficients of correlation (r²) ranged from 0.9993 to 0.9998. The repeatability was carried out by spiking soil samples at concentration levels of 2.5 μg kg⁻¹ for lambda-cyhalothrin, and 10 μg kg⁻¹ for malathion and cypermethrin, respectively. The relative standard deviations (RSDs) varied between 2.3 and 9.6% (n = 3). The limits of detection (LODs), based on signal-to-noise ratio (S/N) of 3, varied between 0.01 and 0.04 μg kg⁻¹. The relative recoveries of three pesticides from soil A1, A2 and A3 at spiking levels of 2.5, 5 and 10 μg kg⁻¹ were in the range of 82.20–91.60%, 88.90–110.5% and 77.10–98.50%, respectively. In conclusion, the proposed method can be successfully applied for the determination of target pesticide residues in real soil samples.     

Sensitive electrochemical detection of arsenic (III) using gold nanoparticle modified carbon nanotubes via anodic stripping voltammetry

Gold nanoparticles were deposited electrolessly on multiwalled carbon nanotubes (CNTs) via in situ reduction of HAuCl₄ by NaBH₄. The resulting gold covered nanotubes were immobilised onto the surface of a glassy carbon electrode via evaporation of a suspension in chloroform. Anodic stripping voltammetry was performed with the modified electrode in As(III) solutions. A limit of detection (LOD based on 3σ) of 0.1 μg L⁻¹ was obtained but more importantly a sensitivity of 1985 μA μM⁻¹ was obtained with square wave voltammetry (SWV) in an optimised system with a deposition time of 120 s. These values, particularly the high sensitivity compare favourably with previously reported methods in the area of electrochemical arsenic detection.     

A new potentiometric ibuprofenate ion sensor immobilized in a graphite matrix for determination of ibuprofen in tablets

The characteristics, performance, and application of an electrode, namely, Pt|Hg|Hg₂(IBP)₂|Graphite, where IBP stands for ibuprofenate ion, are described. This electrode responds to IBP with sensitivity of (58.6 ± 0.9) mV decade^− 1 over the range 5.0 × 10^− 5–1.0 × 10^− 1 mol L^− 1 at pH 6.0–9.0 and a detection limit of 3.8 × 10^− 5 mol L^− 1. The electrode is easily constructed at a relatively low cost with fast response time (within 15–30 s) and can be used for a period of 5 months without any considerable divergence in potentials. The proposed sensor displayed good selectivity for ibuprofen in the presence of several substances, especially concerning carboxylate and inorganic anions. It was used for the direct assay of ibuprofen in commercial tablets by means of the standard additions method. The analytical results obtained by using this electrode are in good agreement with those given by the United States Pharmacopeia procedure.     

Studies on the kinetics of ascorbate oxidation at a ruthenium oxide hexacyanoferrate modified electrode towards the detection at microenvironments

The electrocatalytic oxidation of ascorbate on a ruthenium oxide hexacyanoferrate (RuOHCF) glassy carbon (GC) modified electrode was investigated at pH 6.9 by using rotating disc electrode (RDE) voltammetry. The influence of the systematic variation of rotation rate, film thickness, ascorbate concentration and the electrode potential indicated that the rate of cross-chemical reaction between Ru(III) centres immobilized into the film and ascorbate controls the overall process. The kinetic regime may be classified as a Sk″ mechanism and the second order rate constant for the surface electrocatalytic reaction was found to be 1.56 × 10⁻³ mol⁻¹ L¹ s⁻¹ cm. A carbon fibre microelectrode modified with the RuOHCF film was successfully used as an amperometric sensor to monitor the ascorbate diffusion in a simulated microenvironment experiment.     

Palladized aluminum electrode covered by Prussian blue film as an effective transducer for electrocatalytic oxidation and hydrodynamic amperometry of N-acetyl-cysteine and glutathione

The mediated oxidation of N-acetyl cysteine (NAC) and glutathione (GL) at the palladized aluminum electrode modified by Prussian blue film (PB/Pd–Al) is described. The catalytic activity of PB/Pd–Al was explored in terms of Fe^III[Fe^III(CN)₆]/Fe^III[Fe^II(CN)₆]¹⁻ system by taking advantage of the metallic palladium layer inserted between PB film and Al, as an electron-transfer bridge. The best mediated oxidation of NAC and GL on the PB/Pd–Al electrode was achieved in 0.5 M KNO₃ + 0.2 M potassium acetate of pH 2. The mechanism and kinetics of the catalytic oxidation reactions of the both compounds were monitored by cyclic voltammetry and chronoamperometry. The charge transfer-rate limiting step as well as overall oxidation reaction of NAC or GL is found to be a one-electron abstraction. The values of transfer coefficients α, catalytic rate constant k and diffusion coefficient D are 0.5, 3.2 × 10² M⁻¹ s⁻¹ and 2.45 × 10⁻⁵ cm² s⁻¹ for NAC and 0.5, 2.1 × 10² M⁻¹ s⁻¹ and 3.7 × 10⁻⁵ cm² s⁻¹ for GL, respectively. The modifying layers on the Pd–Al substrate have reproducible behavior and a high level of stability in the electrolyte solutions. The modified electrode is exploited for hydrodynamic amperometry of NAC and GL. The amperometric calibration graph is linear in concentration ranges 2 × 10⁻⁶–40 × 10⁻⁶ for NAC and 5 × 10⁻⁷–18 × 10⁻⁶ M for GL and the detection limits are 5.4 × 10⁻⁷ and 4.6 × 10⁻⁷ M, respectively.     

New understanding of the nature of OH adsorption on Pt(1 1 1) electrodes

The adsorption of hydroxyl on Pt(1 1 1) single crystal electrodes from aqueous acidic solutions is carefully reinvestigated. The effect of small additions (10⁻⁸–10⁻⁵ M) of chloride and bisulphate anions on the OH adsorption region in perchloric acid solution has been studied. Two regions can be differentiated in the voltammetric profile, that behave differently after the addition of the foreign anion. The initial broad adsorption process is unaffected until the highest concentration is attained. However, the sharper peak at higher potentials is affected even at the lower anion concentration. Since mass transport limitations allow to discard the anion adsorption as the main process giving this peak, we propose that the two processes are due to the dissociative adsorption of two different kinds of water, that are affected by the anion in a different way. From this idea, a new model, based on the Frumkin adsorption isotherm, is proposed, which gives an excellent fit of the experimental results.     

Determination of ultra trace amounts of protein by 4-chlorosulfo-(2′-hyaroxylphenylazo)-rhodanine-Ti(IV) complex [ClSARP-Ti(IV)] as the fluorescence spectral probe in AOT microemulsion

Experiments indicated that protein can enhance the fluorescence of the 4-chlorosulfo-(2′-hydroxylophenylazo)-rhodanine-Ti(IV) complex [ClSARP-Ti(IV)] in the presence of bis(2-ethylhexyl)sulfosuccinate sodium salt (AOT) microemulsion. Based on this, a sensitive and reproducible fluorometric method for the determination of micro amount protein was developed. The calibration curves of four proteins were given. Under the optimum experimental conditions, the enhanced fluorescence intensity of the system was in proportional to the concentration of protein in the range of 0.1–11 μg mL⁻¹ for bovine serum albumin (BSA), 1.0–10 μg mL⁻¹ for human serum albumin (HSA), 1.0–50 μg mL⁻¹ for ovalbumin (Ova) and 2.5–18 μg mL⁻¹ for γ-globulins (γ-G). Their detection limits were 0.070, 0.071, 0.33 and 0.22 μg mL⁻¹, respectively. The ClSARP-Ti(IV) complex as a spectral probe can be used to the determination of protein in milk powder and oatmeal yielding with satisfactory results. Therefore, the proposed method is one of the most sensitive methods available. In addition, the interaction mechanism of this system is studied by multi-techniques.     

Platinum-macrocycle co-catalyst for electro-oxidation of formic acid

In this work, a new promoter, tetrasulfophthalocyanine (FeTSPc), one kind of environmental friendly material, was found to be very effective in both inhibiting self-poisoning and improving the intrinsic catalysis activity, consequently enhancing the electro-oxidation current during the electro-oxidation of formic acid. The cyclic voltammograms test showed that the formic acid oxidation peak current density has been increased about 10 times compared with that of the Pt electrode without FeTSPc. The electrochemical double potential step chronoamperometry measurements revealed that the apparent activity energy decreases from 20.64 kJ mol⁻¹ to 17.38 kJ mol⁻¹ after Pt electrode promoted by FeTSPc. The promoting effect of FeTSPc may be owed to the specific structure and abundant electrons of FeTSPc resulting in both the steric hindrance of the formation of poisoning species (CO) and intrinsic kinetic enhancement. In the single cell test, the performance of DFAFC increased from 80 mW cm⁻² mg⁻¹ (Pt) to 130 mW cm⁻² mg⁻¹ after the anode electrode adsorbed FeTSPc.     

Fluorescence enhancement effect for the determination of DNA with calcein-cetyl trimethyl ammonium bromide system

A new spectrofluorimetric method was developed for the determination of trace amounts of DNA using the calcein as a fluorescent probe. In the presence of appropriate amounts of the cationic surfactant cetyl trimethyl ammonium bromide (CTAB), the anionic dye calcein dimerizes. The weak fluorescence intensity of the dimer was enhanced by adding DNA at pH 6–7. The interaction between calcein–CTAB and DNA was studied on the basis of this behavior and a new method was developed for determining DNA. Under the optimal conditions, the enhanced fluorescence intensity was in proportion to the concentration of DNA in the range of 4.0 × 10⁻⁶ to 8.0 × 10⁻⁵ g L⁻¹ for fsDNA and thermally denatured ctDNA (4.5 × 10⁻⁶ to 9.0 × 10⁻⁵ g L⁻¹). The detection limits (S/N = 3) were 2.0 × 10⁻⁶ and 2.2 × 10⁻⁶ g L⁻¹, respectively. This method was used for determining the concentration of DNA in synthetic samples with satisfactory results.     

Enhanced sensitivity for Cu(II) by a salicylidine-functionalized polysiloxane carbon paste electrode

A new approach for decreasing the detection limit for a copper(II) ion-selective electrode (ISE) is presented. The ISE is designed using salicylidine-functionalized polysiloxane in carbon paste. This work describes the attempts to develop the electrode and measurements of its characteristics. The new type of renewable three-dimensional chemically modified electrode could be used in a pH range of 2.3–5.4, and its detection limit is 2.7 × 10⁻⁸ mol L⁻¹ (1.2 μg L⁻¹). This sensor exhibits a good Nernstian slope of 29.4 ± 0.5 mV/decade in a wide linear concentration range of 2.3 × 10⁻⁷ to 1.0 × 10⁻³ mol L⁻¹ of Cu(II). It has a short response time (8 s) and noticeably high selectivity over other Cu(II) selective electrodes. Finally, it was satisfactorily used as an indicator electrode in complexometric titration with EDTA and determination of copper(II) in miscellaneous samples such as urine and various water samples.     

Electrodeposition of Lu on W and Al electrodes: Electrochemical formation of Lu–Al alloys and oxoacidity reactions of Lu(III) in the eutectic LiCl–KCl

The electrodeposition of lutetium on inert electrodes and the formation of lutetium–aluminium alloys were investigated in the eutectic LiCl–KCl in the temperature range 673–823 K. On a tungsten electrode, the electroreduction of Lu(III) proceeds in a single step and electrocrystalization plays an important role. Experimental current–time transients are in good agreement with theoretical models based on either instantaneous or progressive nucleation with three dimensional growth of the nuclei, depending on the working temperature. The diffusion coefficient of Lu(III) was determined by chronopotentiometry by applying the Sand equation. The activation energy for diffusion was found to be 31.5 ± 1.3 kJ mol⁻¹. Al₃Lu and mixtures of Al₃Lu and Al₂Lu, characterized by XRD analysis and SEM, were obtained from the LiCl–KCl melt containing Lu(III) by potentiostatic electrolysis using an Al electrode. The activity of Lu and the standard Gibbs energies of formation for Al₃Lu were estimated from open-circuit chronopotentiometric measurements. The E–pO²⁻(potential–oxoacidity) diagram for Lu–O stable compounds in LiCl–KCl at 723 K has been constructed by combining theoretical and experimental data. In this way, the apparent standard potential for the Lu(III)/Lu system has been determined by potentiometry. Potentiometric titrations of Lu(III) solutions with oxide donors, using a yttria stabilized zirconia membrane electrode “YSZME” as a pO²⁻ indicator electrode, have shown the stability of LuOCl and Lu₂O₃ in the melt and their solubility products have been determined at 723 K.     

Surface-enhanced oxidation and detection of Sunset Yellow and Tartrazine using multi-walled carbon nanotubes film-modified electrode

The insoluble multi-walled carbon nanotubes (MWNT) was successfully dispersed into water in the presence of hydrophobic surfactant. After that, MWNT film-coated glassy carbon electrode (GCE) was achieved via dip-coating and evaporating water. Owing to huge surface area, high sorption capacity and subtle electronic properties, MWNT film exhibits highly efficient accumulation efficiency as well as considerable surface enhancement effects to Sunset Yellow and Tartrazine. As a result, the oxidation peak currents of Sunset Yellow and Tartrazine remarkably increase at the MWNT film-modified GCE. Based on this, a novel electrochemical method was developed for the simultaneous determination of Sunset Yellow and Tartrazine. The limits of detection are 10.0 ng mL⁻¹ (2.2 × 10⁻⁸ mol L⁻¹) and 0.1 μg mL⁻¹ (1.88 × 10⁻⁷ mol L⁻¹) for Sunset Yellow and Tartrazine. Finally, the proposed method was successfully used to detect Sunset Yellow and Tartrazine in soft drinks.     

Energetics of copper diphosphates – Cu2P2O7 and Cu3(P2O6OH)2

Differential scanning calorimetry and high temperature oxide melt solution calorimetry are used to study enthalpy of phase transition and enthalpies of formation of Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂. α-Cu₂P₂O₇ is reversibly transformed to β-Cu₂P₂O₇ at 338–363 K with an enthalpy of phase transition of 0.15 ± 0.03 kJ mol⁻¹. Enthalpies of formation from oxides of α-Cu₂P₂O₇ and Cu₃(P₂O₆OH)₂ are −279.0 ± 1.4 kJ mol⁻¹ and −538.8 ± 2.7 kJ mol⁻¹, and their standard enthalpies of formation (enthalpy of formation from elements) are −2096.1 ± 4.3 kJ mol⁻¹ and −4302.7 ± 6.7 kJ mol⁻¹, respectively. The presence of hydrogen in diphosphate groups changes the geometry of Cu(II) and decreases acid–base interaction between oxide components in Cu₃(P₂O₆OH)₂, thus decreasing its thermodynamic stability.     

Infrared spectroscopy of isolated nucleotides. 1. The cyclic 3′,5′-adenosine monophosphate anion

The intracellular second messenger deprotonated adenosine 3′,5′-cyclic monophosphate anion (cAMP-H)⁻, generated as gaseous species by electrospray ionization (ESI) and stored in a Paul ion-trap mass spectrometer, has been investigated by mass-resolved infrared multiple photon dissociation (IRMPD) spectroscopy in the 900–1800 cm⁻¹ fingerprint wavenumber range, exploiting the powerful and continuously tunable radiation from a free electron laser (FEL) at the Centre Laser Infrarouge d’Orsay (CLIO). The IRMPD features are interpreted by comparison with the IR spectra obtained by quantum chemical calculations for different low-lying conformers, allowing an assignment for the observed IRMPD bands. It is to be noted that the calculated IR spectra for the most stable conformers look all rather similar and do not allow an unambiguous structural assignment, based exclusively on the IRMPD spectrum. However, the positions and intensities of the IRMPD features of isolated (cAMP-H)⁻ ions are consistent with a species deprotonated at the phosphate group and compatible with the main equilibrium structures lying within 18 kJ mol⁻¹ from the lowest lying conformation, the anti-chair form with a C3′-endo sugar twist.