Preparation and characterization of manganese(IV) in aqueous acetic acid

Mn(IV) acetate was generated in acetic acid solutions and characterized by UV-vis spectroscopy, magnetic susceptibility, and chemical reactivity. All of the data are consistent with a mononuclear manganese(IV) species. Oxidation of several substrates was studied in glacial acetic acid (HOAc) and in 95:5 HOAc-H(2)O. The reaction with excess Mn(OAc)(2) produces Mn(OAc)(3) quantitatively with mixed second-order kinetics, k (25.0 °C) = 110 ± 4 M(-1) s(-1) in glacial acetic acid, and 149 ± 3 M(-1) s(-1) in 95% AcOH, ΔH(?) = 55.0 ± 1.2 kJ mol(-1), ΔS(?) = -18.9 ± 4.1 J mol(-1) K(-1). Sodium bromide is oxidized to bromine with mixed second order kinetics in glacial acetic acid, k = 220 ± 3 M(-1) s(-1) at 25 °C. In 95% HOAc, saturation kinetics were observed.     

A computational study of interactions between acetic acid and water molecules

Density functional theory calculations were performed for the title reactions to elucidate the difference between the strong cyclic hydrogen bond of (Me-COOH)(2) and the electrolytic dissociation, MeCOOH <==> Me-COO(-) + H(+), as a weak acid. The association of water clusters with acetic acid dimers strengthens the cyclic hydrogen bond. A nucleophilic attack of the carboxylic carbon by a water cluster leads to a first zwitterionic intermediate, MeCOO(-) + H(3)O(+) + (HO)(3)C-Me. The intermediate is unstable and is isomerized to a neutral interacting system, MeCOOH...(HO)(3)C-Me + H(2)O. The ethanetriol, (HO)(3)-CMe is transformed to an acetic acid monomer. The monomer may be dissociated to give a second zwitterionic intermediate with reasonable proton-relay patterns and energy changes. In proton relay reaction channels, H in MeCOOH is not an acidic proton but is always a hydroxy proton.     

5-(色酮基-3-次甲基)(硫代)巴比妥酸的合成

将巴比妥酸或硫代巴比妥酸、3-甲酰基色酮在乙酸-乙酸酐溶液(含乙酸酐10%)中进行缩合反应,制备了5-(色酮基-3-次甲基)(硫代)巴比妥酸.并经元素分析,IR,1H NMR及13C NMR确证了产物的结构.     

Synthesis and characterization of the tetranuclear iron(III) complex of a new asymmetric multidentate ligand. A structural model for purple acid phosphatases

The ligand, 2-((2-hydroxy-5-methyl-3-((pyridin-2-ylmethylamino)methyl)benzyl)(2-hydroxybenzyl)amino)acetic acid (H(3)HPBA), which contains a donor atom set that mimics that of the active site of purple acid phosphatase is described. Reaction of H(3)HPBA with iron(III) or iron(II) salts results in formation of the tetranuclear complex, [Fe(4)(HPBA)(2)(OAc)(2)(mu-O)(mu-OH)(OH(2))(2)]ClO(4) x 5H(2)O. X-Ray structural analysis reveals the cation consists of four iron(III) ions, two HPBA(3-) ligands, two bridging acetate ligands, a bridging oxide ion and a bridging hydroxide ion. Each binucleating HPBA(3-) ligand coordinates two structurally distinct hexacoordinate iron(III) ions. The two metal ions coordinated to a HPBA(3-) ligand are linked to the two iron(III) metal ions of a second, similar binuclear unit by intramolecular oxide and hydroxide bridging moieties to form a tetramer. The complex has been further characterised by elemental analysis, mass spectrometry, UV-vis and MCD spectroscopy, X-ray crystallography, magnetic susceptibility measurements and variable-temperature M?ssbauer spectroscopy.     

Equilibrium and kinetics studies of reactions of manganese acetate, cobalt acetate, and bromide salts in acetic acid solutions

The oxidation of hydrogen bromide and alkali metal bromide salts to bromine in acetic acid by cobalt(III) acetate has been studied. The oxidation is inhibited by Mn(OAc)(2) and Co(OAc)(2), which lower the bromide concentration through complexation. Stability constants for Co(II)Br(n)() were redetermined in acetic acid containing 0.1% water as a function of temperature. This amount of water lowers the stability constant values as compared to glacial acetic acid. Mn(II)Br(n)() complexes were identified by UV-visible spectroscopy, and the stability constants for Mn(II)Br(n)() were determined by electrochemical methods. The kinetics of HBr oxidation shows that there is a new pathway in the presence of M(II)Br(n)(). Analysis of the concentration dependences shows that CoBr(2) and MnBr(2) are the principal and perhaps sole forms of the divalent metals that react with Co(III) and Mn(III). The interpretation of these data is in terms of this step (M, N = Mn or Co): M(OAc)(3) + N(II)Br(2) + HOAc --> M(OAc)(2) + N(III)Br(2)OAc. The second-order rate constants (L mol(-)(1) s(-)(1)) for different M, N pairs in glacial acetic acid are 4.8 (Co, Co at 40 degrees C), 0.96 (Mn, Co at 20 degrees C), 0.15 (Mn(III).Co(II), Co at 20 degrees C), and 0.07 (Mn, Mn at 20 degrees C). Following that, reductive elimination of the dibromide radical is proposed to occur: N(III)Br(2)OAc + HOAc --> N(OAc)(2) + HBr(2)(*). This finding implicates the dibromide radical as a key intermediate in this chemistry, and indeed in the cobalt-bromide catalyzed autoxidation of methylarenes, for which some form of zerovalent bromine has been identified. The selectivity for CoBr(2) and MnBr(2) is consistent with a pathway that forms this radical rather than bromine atoms which are at a considerably higher Gibbs energy. Mn(OAc)(3) oxidizes PhCH(2)Br, k = 1.3 L mol(-)(1) s(-)(1) at 50.0 degrees C in HOAc.     

A combined stopped-flow, electrospray ionization mass spectrometry and (31)P NMR study on the acetic acid-mediated fragmentation of the hydroxo-chalcogenide cluster [W(3)Se(4)(OH)(3)(dmpe)(3)](+) (dmpe = 1,2-bis(dimethylphosphanyl)ethane) to yield the dinuclear [W(2)Se(2)(mu-Se)(2)(mu-CH(3)CO(2))(dmpe)(2)](+) complex

The reaction of the incomplete-cuboidal [W(3)Se(4)(OH)(3)(dmpe)(3)](+) ([1](+)) cluster with acetic acid in acetonitrile solution leads to cluster fragmentation with formation of the dinuclear [W(2)Se(2)(mu-Se)(2)(mu-CH(3)CO(2))(dmpe)(2)](+) ([2](+)) complex. The X-ray structure of [2]PF(6) presents two equivalent metal centres bridged by one acetate ligand. Each W atom is additionally coordinated by one terminal selenium atom, two bridging selenido and two diphosphane phosphorus atoms in an essentially octahedral environment. Stopped-flow and conventional UV-vis studies indicate that fragmentation of [1](+) into [2](+) occurs through a complex mechanism. Three steps can be distinguished in the stopped-flow time scale, all of them showing a first order dependence with respect to the acetic acid concentration, followed by very slow spectral changes that lead to the formation of [2](+). Phosphorus NMR, electrospray ionization mass spectrometry (ESI-MS) and tandem mass spectrometry (ESI-MS/MS) have been used to identify the nature of the reaction intermediates formed in the different steps. These studies indicate that the first two steps correspond to the formal substitutions of the hydroxo ligands at two metal centres by terminal acetate ligands. The third step involves bridging of one of the terminal acetate ligands, which actually prepares the trinuclear cluster to afford the acetate-bridged [W(2)Se(2)(mu-Se)(2)(mu-CH(3)CO(2))(dmpe)(2)](+) ([2](+)) complex. Although the precise details of the final conversion to [2](+) have not been established, the results obtained by combination of the different experimental techniques provide a complete picture of the speciation of the cluster [1](+) in acetonitrile solutions containing acetic acid.     

Ni(2)(ppepO)(C(6)H(5)COO)(2)(CH(3)COOH)]ClO(4).C(4)H(10)O: Synthesis and Characterization of an Asymmetric Dinuclear Nickel(II) Complex Showing Unusual Coordination Behavior with Relevance to the Active Site of Urease

The synthesis of the novel asymmetric ligand 1-[bis(2-pyridylmethyl)amino]-3-[2-(2-pyridyl)ethoxy]-2-hydroxypropane (ppepOH) is reported. The ligand is suitable to form asymmetric dinuclear complexes with various transition metal ions. As an example, the synthesis and X-ray structure analysis of the dinickel(II) complex [Ni(2)(ppepO)(C(6)H(5)COO)(2)(CH(3)COOH)]ClO(4).C(4)H(10)O are described. The complex crystallizes in the monoclinic space group P2(1)/n with the following unit cell parameters: a = 13.704(10) ?, b = 14.849(10) ?, c = 22.697(14) ?, beta = 96.80(5) degrees, Z = 4. The nickel(II) ions are bridged by the alkoxy donor of the ligand and two benzoate anions. The hexadentate ligand leaves a free coordination site at one of the nickel(II) ions, which is occupied by a monodentate coordinated acetic acid molecule. The coordination of the neutral acetic acid molecule is selectively stabilized by a strong intramolecular hydrogen bond of the acidic proton to the &mgr;-alkoxo bridge of the dinuclear complex. The asymmetric complex was prepared in order to mimic the substrate uptake in the dinuclear active site of ureases. The magnetic and spectroscopic properties of the complex were determined and related to those of the urease enzymes.     

Density functional theory study of the role of anions on the oxidative decomposition reaction of propylene carbonate

The oxidative decomposition mechanism of the lithium battery electrolyte solvent propylene carbonate (PC) with and without PF(6)(-) and ClO(4)(-) anions has been investigated using the density functional theory at the B3LYP/6-311++G(d) level. Calculations were performed in the gas phase (dielectric constant ε = 1) and employing the polarized continuum model with a dielectric constant ε = 20.5 to implicitly account for solvent effects. It has been found that the presence of PF(6)(-) and ClO(4)(-) anions significantly reduces PC oxidation stability, stabilizes the PC-anion oxidation decomposition products, and changes the order of the oxidation decomposition paths. The primary oxidative decomposition products of PC-PF(6)(-) and PC-ClO(4)(-) were CO(2) and acetone radical. Formation of HF and PF(5) was observed upon the initial step of PC-PF(6)(-) oxidation while HClO(4) formed during initial oxidation of PC-ClO(4)(-). The products from the less likely reaction paths included propanal, a polymer with fluorine and fluoro-alkanols for PC-PF(6)(-) decomposition, while acetic acid, carboxylic acid anhydrides, and Cl(-) were found among the decomposition products of PC-ClO(4)(-). The decomposition pathways with the lowest barrier for the oxidized PC-PF(6)(-) and PC-ClO(4)(-) complexes did not result in the incorporation of the fluorine from PF(6)(-) or ClO(4)(-) into the most probable reaction products despite anions and HF being involved in the decomposition mechanism; however, the pathway with the second lowest barrier for the PC-PF(6)(-) oxidative ring-opening resulted in a formation of fluoro-organic compounds, suggesting that these toxic compounds could form at elevated temperatures under oxidizing conditions.     

Reaction of 2-(2-Oxo-1,2-dihydro-3<Emphasis Type="Italic">H</Emphasis>-indol-3-ylidene)acetic acids esters with phenylhydrazine

2-(2-Oxo-1,2-dihydro-3H-indol-3-ylidene)acetic acids esters reacted with phenylhydrazine yielding products of the regioselective addition of the latter in the α-(C²)-position of the exo ethylene bond, (2-oxo-2,3-dihydro-1H-indol-3-yl)(2-phenylhydrazino)acetic acids esters.     

Synthesis and Crystal Structure Analysis of 2-（3,5-Di-tert-butyl-2-hydroxyphenyl）-2-（3,4- dimethylphenyl） Acetic Acid Dimethylamine Salt

A new compound 2-（3,5-di-tert-butyl-2-hydroxyphenyl）-2-（3,4-dimethylphenyl） acetic acid dimethylamine salt （[NH2（CH3）2][C24H31O3]） was synthesized and structurally determined. It is of monoclinic system, space group P21/c with a = 14.731（2）, b = 10.1185（10）, c = 17.065（2） A^°, β = 98.293（10）° ,Z = 4, V = 2517.0（6）A^°^3, Dc = 1.091 g/cm^3, F（000） = 904 and Mr= 413.58. The dihedral angle defined by two benzene rings is 98.23°.     

Metal carbonyls as pharmaceuticals? [Ru(CO)3Cl(glycinate)], a CO-releasing molecule with an extensive aqueous solution chemistry

The pharmacologically active [Ru(CO)(3)Cl(glycinate)] is shown to be in equilibrium with [Ru(CO)(2)(CO(2)H)Cl(glycinate)](-) (isomers) at around pH 3.1 which then at physiological pH reacts with more base to give [Ru(CO)(2)(CO(2))Cl(glycinate)](2-) (isomers) or [Ru(CO)(2)(CO(2)H)(OH)(glycinate)](-) (isomers). The ease with which [Ru(CO)(3)Cl(glycinate)] reacts with hydroxide results in it producing a solution in water with a pH of around 2 to 2.5 depending on concentration and making its solutions more acidic than those of acetic acid at comparable concentrations. Acidification of [Ru(CO)(3)Cl(glycinate)] with HCl gives [Ru(CO)(3)Cl(2)(NH(2)CH(2)CO(2)H)]. The crystal structures of [Ru(CO)(3)Cl(glycinate)] and [Ru(CO)(3)Cl(2)(NH(2)CH(2)CO(2)Me)] are reported.     

Promotion of iridium-catalyzed methanol carbonylation: mechanistic studies of the cativa process

The iridium/iodide-catalyzed carbonylation of methanol to acetic acid is promoted by carbonyl complexes of W, Re, Ru, and Os and simple iodides of Zn, Cd, Hg, Ga, and In. Iodide salts (LiI and Bu(4)NI) are catalyst poisons. In situ IR spectroscopy shows that the catalyst resting state (at H(2)O levels > or = 5% w/w) is fac,cis-[Ir(CO)(2)I(3)Me](-), 2. The stoichiometric carbonylation of 2 into [Ir(CO)(2)I(3)(COMe)](-), 6, is accelerated by substoichiometric amounts of neutral promoter species (e.g., [Ru(CO)(3)I(2)](2), [Ru(CO)(2)I(2)](n), InI(3), GaI(3), and ZnI(2)). The rate increase is approximately proportional to promoter concentration for promoter:Ir ratios of 0-0.2. By contrast anionic Ru complexes (e.g., [Ru(CO)(3)I(3)](-), [Ru(CO)(2)I(4)](2)(-)) do not promote carbonylation of 2 and Bu(4)NI is an inhibitor. Mechanistic studies indicate that the promoters accelerate carbonylation of 2 by abstracting an iodide ligand from the Ir center, allowing coordination of CO to give [Ir(CO)(3)I(2)Me], 4, identified by high-pressure IR and NMR spectroscopy. Migratory CO insertion is ca. 700 times faster for 4 than for 2 (85 degrees C, PhCl), representing a lowering of Delta G(++) by 20 kJ mol(-1). Ab initio calculations support a more facile methyl migration in 4, the principal factor being decreased pi-back-donation to the carbonyl ligands compared to 2. The fac,cis isomer of [Ir(CO)(2)I(3)(COMe)](-), 6a (as its Ph(4)As(+) salt), was characterized by X-ray crystallography. A catalytic mechanism is proposed in which the promoter [M(CO)(m)I(n)] (M = Ru, In; m = 3, 0; n = 2, 3) binds I(-) to form [M(CO)(m)I(n+1)](-)H(3)O(+) and catalyzes the reaction HI(aq) + MeOAc --> MeI + HOAc. This moderates the concentration of HI(aq) and so facilitates catalytic turnover via neutral 4.     

Adducts of acetylene and dimethylacetylenedicarboxylate at sulfurs in sulfur-bridged incomplete cubane-type tungsten clusters

Reactions are reported of sulfur-bridged incomplete cubane-type tungsten clusters having W(3)(micro(3)-S)(micro-S)(3) cores with acetylene and its derivative dimethylacetylenedicarboxylate (DMAD). The reaction of the isothiocyanate tungsten cluster [W(3)(micro(3)-S)(micro-S)(3)(NCS)(9)](5)(-) (5) with acetylene in 0.1 M HCl afforded a novel complex having two acetylene molecules in different adduct formation modes, [W(3)(micro(3)-S)(micro(3)-SCH=CHS)(micro-SCH=CH(2))(NCS)(9)](4)(-) (6), and the presence of two kinds of intermediates [W(3)(micro(3)-S)(micro-S)(micro(3)-SCH=CHS)(NCS)(9)](5)(-) (7) and [W(3)(micro(3)-S)(micro-S)(2)(micro-SCH=CH(2))(NCS)(9)](4)(-) (8) was observed. The reaction of the diethyldithiophosphate (dtp) tungsten cluster [W(3)(micro(3)-S)(micro-S)(3)(micro-OAc)(dtp)(3)(CH(3)CN)] (10) with DMAD in acetonitrile containing acetic acid resulted in the formation of another complex having two DMAD molecules of different adduct formation modes, [W(3)(micro(3)-S)(micro-SC(CO(2))=CH(CO(2)CH(3)))(micro(3)-SC(CO(2)CH(3))=C(CO(2)CH(3))S)(micro-OAc)(dtp)(3)] (11), where hydrolysis of one of the four ester groups of the two DMAD groups occurred and the resultant carboxylic group coordinated to tungsten. The conformation of the micro-SCH=CH(2) moiety in 6 is different from that of the corresponding moiety in [W(3)(micro(3)-S)(micro-O)(micro-S)(micro-SCH=CH(2))(NCS)(9)](4)(-) (4). Introduction of the second acetylene molecule to the intermediate [W(3)(micro(3)-S)(micro-S)(2)(micro-SCH=CH(2))(NCS)(9)](4)(-) (8) resulted in the formation of 6. The clusters were characterized by UV-vis spectroscopy, (1)H NMR spectroscopy, and X-ray crystallography (for (Hpy)(4).6.1.33py.0.5H(2)O and 11.CH(3)CN), and the formation of 6 and 11 was examined in detail from a mechanistic point of view.     

1,4-二氢-5H-(二硝基亚甲基)-四唑(DNMT)的合成、晶体结构和热行为研究

利用1-氨基-1-肼基-2,2-二硝基乙烯(AHDNE)和亚硝酸钾在酸性水溶液中合成出了高能富氮化合物1,4-二氢- 5H-(二硝基亚甲基)-四唑(DNMT), 并在水溶液中培养出DNMT•2H2O单晶. 该晶体属正交晶系, 空间群为Pnma, 晶胞参数为: a＝10.392(2) Å, b＝15.809(4) Å, c＝5.0640(11) Å, V＝832.0(3) Å3, Dc＝1.629 g•cm－3, μ＝0.163 mm－1, F(000)＝432, Z＝4, R1＝0.0311, wR2＝0.0885. 运用Gaussian 03程序, 在6-311＋＋G**基组水平上, 用HF和B3LYP两种方法对DNMT分子进行了几何全优化和相应的电荷、轨道能量分析. 理论计算和热分析结果表明DNMT呈现较差的热稳定性.     

Water-catalyzed hydrolysis of the radical cation of ketene in the gas phase: theory and experiment

Both theoretical and experimental investigations are reported for the gas-phase hydrolysis of the radical cation of ketene, H(2)CCO(*+). Density functional theory (DFT) with the B3LYP/6-311++G(d,p) method indicates that a second water molecule is required as a catalyst for the addition of water across the C=O bond in H(2)CCO(*+) by eliminating the activation barrier for the conversion of [H(2)CCO.H(2)O](*+) to [H(2)CC(OH)(2)](*+). Theory further indicates that [H(2)CC(OH)(2).H(2)O](*+) may recombine with electrons to produce neutral acetic acid. Experimental results of flow-reactor tandem mass spectrometer experiments in which CH(2)CO(*+) ions were produced either directly from ketene by electron transfer or by the chemical reaction of CH(2)(*+) with CO are consistent with formation of an (C(2),H(4),O(2))(*+) ion in a reaction second-order in H(2)O. Furthermore, comparative multi-CID experiments indicate that this ion is likely to be the enolic CH(2)C(OH)(2)(*+) cation. The results suggest a possible mechanism for the formation of acetic acid from ketene and water on icy surfaces in hot cores and interstellar clouds.     

Structure of complexes formed by dissolution of palladium diacetate in methanol and chloroform. In situ NMR study

The behavior of palladium diacetate cyclic trimer [Pd(OAc)(2)](3) (1) upon its dissolution in methanol and wet chloroform was studied by (1)H and (13)C NMR including 2D-HSQC and 2D-DOSY techniques. Upon dissolution, trimer 1 reacts with methanol and is completely transformed first into the methoxo complex Pd(3)(μ-OMe)(OAc)(5) (2), which already at -18 °C undergoes a slow exchange of second bridging acetate ligand between the same palladium atoms to form the symmetric dimethoxo complex Pd(3)(μ-OMe)(2)(OAc)(4), the maximum relative concentration of which reaches 20-30 mol % of initial loading trimer 1. Along with the dimethoxo complex, both soluble and insoluble polynuclear palladium clusters are gradually formed at -18 °C, and their total amount reaches up to 60% of the starting Pd(2+) loading. The increase of temperature to 27 °C results in the reduction of palladium(II) to Pd metal by methanol, which is oxidized and transformed into formaldehyde hemiacetal and methyl formate. Upon dissolution in wet chloroform, trimer 1 is reversibly hydrolyzed to the hydroxo complex Pd(3)(μ-OH)(OAc)(5) (10) in ratio 1/10 ≈ 3/1. The temperature decrease and addition of acetic acid shift the equilibrium in this system toward trimer 1, and addition of water shifts it in the opposite direction. Addition of methanol to the equilibrium mixture of 1 and 10 results in the fast exchange of bridging acetate in trimer 1 by the μ-OMe group. Substitution of the μ-OH ligand by μ-OMe in 10 occurs in parallel but more slowly. Complex 2 formed in both cases is more stable in chloroform than in methanol.     

Photochemical and time resolved spectroscopic studies of intermediates relevant to iridium-catalyzed methanol carbonylation: photoinduced CO migratory insertion

Photoreaction, time-resolved infrared (TRIR), and DFT studies were utilized to probe transformations between iridium complexes with possible relevance to the mechanisms of the iridium/iodide-catalyzed methanol carbonylation to acetic acid. Solution-phase continuous and laser flash photolysis of the tetraphenylarsonium salt of the fac-[CH3Ir(CO)2I3]- anion (1a) under excess carbon monoxide resulted in migratory insertion to give the acyl complex ion mer,trans-[Ir(C(O)CH3)(CO)2I3]- (2a). The latter was isolated as its AsPh4+ salt, and its X-ray crystal structure was determined. TRIR spectra indicate that several transients are generated upon flash photolysis of 1a. The principal photoreaction is CO dissociation, and this is proposed to generate the isomeric complexes fac-[CH3Ir(CO)(Sol)I3]- (I(CO)(fac), Sol = solvent) and mer,trans-[CH3Ir(CO)(Sol)I3]- (I(CO)(mer)). I(CO)(fac) reacts with CO to regenerate 1a with a second-order rate constant (k(CO)) approximately 2.5 x 10(7) M(-1) s(-1) in ambient dichloroethane, while I(CO)(mer) is the apparent precursor to 2a. Kinetics studies indicate the photoinduced formation of a third intermediate (I(M)), hypothesized to be the anionic acyl complex fac-[Ir(C(O)CH3)(CO)(Sol)I3]-. In the absence of added CO, these intermediates undergo dimerization to form a mixture of isomers with the apparent formula [Ir(C(O)CH3)(CO)I3]2(2-). One of these dimers was isolated as the AsPh4+ salt, and the crystal structure was determined. Addition of excess pyridine to a solution of the dimers gave the neutral complex mer,trans-[Ir(C(O)CH3)(CO)(py)2I2], which was characterized by FTIR, NMR, and X-ray crystallography. These transformations, especially the unprecedented photoinduced CO insertion reaction, are discussed and interpreted in terms of the factors favoring migratory insertion dynamics.     

Iron-catalyzed olefin epoxidation in the presence of acetic acid: insights into the nature of the metal-based oxidant

The iron complexes [(BPMEN)Fe(OTf)2] (1) and [(TPA)Fe(OTf)2] (2) [BPMEN = N,N'-bis-(2-pyridylmethyl)-N,N'-dimethyl-1,2-ethylenediamine; TPA = tris-(2-pyridylmethyl)amine] catalyze the oxidation of olefins by H2O2 to yield epoxides and cis-diols. The addition of acetic acid inhibits olefin cis-dihydroxylation and enhances epoxidation for both 1 and 2. Reactions carried out at 0 degrees C with 0.5 mol % catalyst and a 1:1.5 olefin/H2O2 ratio in a 1:2 CH3CN/CH3COOH solvent mixture result in nearly quantitative conversions of cyclooctene to epoxide within 1 min. The nature of the active species formed in the presence of acetic acid has been probed at low temperature. For 2, in the absence of substrate, [(TPA)FeIII(OOH)(CH3COOH)]2+ and [(TPA)FeIVO(NCCH3)]2+ intermediates can be observed. However, neither is the active epoxidizing species. In fact, [(TPA)FeIVO(NCCH3)]2+ is shown to form in competition with substrate oxidation. Consequently, it is proposed that epoxidation is mediated by [(TPA)FeV(O)(OOCCH3)]2+, generated from O-O bond heterolysis of the [(TPA)FeIII(OOH)(CH3COOH)]2+ intermediate, which is promoted by the protonation of the terminal oxygen atom of the hydroperoxide by the coordinated carboxylic acid.     

Catalysis of the beta-elimination of HF from isomeric 2-fluoroethylpyridines and 1-methyl-2-fluoroethylpyridinium salts. Proton-activating factors and methyl-activating factors as a mechanistic test to distinguish between concerted E2 and E1cb irreversible mechanisms

Second-order rate constants, k(OH)(N), M(-)(1) s(-)(1), for the beta-elimination reactions of HF with 2-(2-fluoroethyl)pyridine (2), 3-(2-fluoroethyl)pyridine (3), and 4-(2-fluoroethyl)pyridine (4) in OH(-)/H(2)O, at 50 degrees C and mu = 1 M KCl, are = 0.646 x 10(-)(4) M(-)(1) s(-)(1), = 2.97 x 10(-)(6) M(-)(1) s(-)(1), and = 5.28 x 10(-)(4) M(-)(1) s(-)(1), respectively. When compared with the second-order rate constants for the same processes with the nitrogen-methylated substrates 1-methyl-2-(2-fluoroethyl)pyridinium iodide (5), 1-methyl-3-(2-fluoroethyl)pyridinium iodide (6), and 1-methyl-4-(2-fluoroethyl)pyridinium iodide (7), the methyl-activating factor (MethylAF) can be calculated from the ratio k(OH)(NCH)3/, and a value of 8.7 x 10(5) is obtained with substrates 5/2, a value of 1.6 x 10(3) with 6/3, and a value of 2.1 x 10(4) with 7/4. The high values of MethylAF are in agreement with an irreversible E1cb mechanism (A(N)D(E) + D(N)) for substrates 5 and 7 and with the high stability of the intermediate carbanion related to its enamine-type structure. In acetohydroxamate/acetohydroxamic acid buffers (pH 8.45-9.42) and acetate/acetic acid buffers (pH 4.13-5.13), the beta-elimination reactions of HF, with substrates 2 and 4, occur at NH(+), the substrates protonated at the nitrogen atom of the pyridine ring, even when the [NH(+)] is much lower than the [N], the unprotonated substrate, due to the high proton-activating factor (PAF) value observed: 3.6 x 10(5) for 2 and 6.5 x 10(4) for 4 with acetohydroxamate base. These high PAF values are indicative of an irreversible E1cb mechanism rather than a concerted E2 (A(N)D(E)D(N)) mechanism. Finally, the rate constant for carbanion formation from NH(+) with 2 is k(B)(NH)+ = 0.35 M(-)(1) s(-)(1), which is lower than when chlorine is the leaving group ( = 1.05 M(-)(1) s(-)(1); Alunni, S.; Busti, A. J. Chem. Soc., Perkin Trans. 2 2001, 778). This is direct experimental evidence that some lengthening of the carbon-leaving group bond can occur in the intermediate carbanion. This is a point of interest for interpreting a heavy-atom isotope effect.     

Copper and Bismuth Complexes Containing Dipyridyl gem-Diolato Ligands: Bi(III)(2)[(2-Py)(2)CO(OH)](2)(O(2)CCF(3))(4)(THF)(2), Cu(II)[(2-Py)(2)CO(OH)](2)(HO(2)CCH(3))(2), and Cu(II)(4)[(2-Py)(2)CO(OH)](2)(O(2)CCH(3))(6)(H(2)O)(2), a Ferromagnetically Coupled Tetranuclear Copper(II) Chain

The reactions of the singly deprotonated di-2-pyridylmethanediol ligand (dpmdH(-)) with copper(II) and bismuth(III) have been investigated. A new dinuclear bismuth(III) complex Bi(2)(dpmdH)(2)(O(2)CCF(3))(4)(THF)(2), 1, has been obtained by the reaction of BiPh(3) with di-2-pyridyl ketone in the presence of HO(2)CCF(3) in tetrahydrofuran (THF). The reaction of Cu(OCH(3))(2) with di-2-pyridyl ketone, H(2)O, and acetic acid in a 1:2:2:2 ratio yielded a mononuclear complex Cu[(2-Py)(2)CO(OH)](2)(HO(2)CCH(3))(2), 2, while the reaction of Cu(OAC)(2)(H(2)O) with di-2-pyridyl ketone and acetic acid in a 2:1:1 ratio yielded a tetranuclear complex Cu(4)[(2-Py)(2)CO(OH)](2)(O(2)CCH(3))(6)(H(2)O)(2), 3. The structures of these complexes were determined by single-crystal X-ray diffraction analyses. Three different bonding modes of the dpmdH(-) ligand were observed in compounds 1-3. In 2, the dpmdH(-) ligand functions as a tridentate chelate to the copper center and forms a hydrogen bond between the OH group and the noncoordinating HO(2)CCH(3) molecule. In 1 and 3, the dpmdH(-) ligand functions as a bridging ligand to two metal centers through the oxygen atom. The two pyridyl groups of the dpmdH(-) ligand are bound to one bismuth(III) center in 1, while in 3 they are bound two copper(II) centers, respectively. Compound 3 has an unusual one dimensional hydrogen bonded extended structure. The intramolecular magnetic interaction in 3 has been found to be dominated by ferromagnetism. Crystal data: 1, C(38)H(34)N(4)O(14)F(12)Bi(2), triclinic P&onemacr;, a = 11.764(3) ?, b = 11.949(3) ?, c = 9.737(1) ?, alpha =101.36(2) degrees, beta = 105.64(2) degrees, gamma = 63.79(2) degrees, Z = 1; 2, C(26)H(26)N(4)O(8)Cu/CH(2)Cl(2), monoclinic C2/c, a = 25.51(3) ?, b = 7.861(7) ?, c = 16.24(2) ?, beta = 113.08(9) degrees, Z = 4; 3, C(34)H(40)N(4)O(18)Cu(4)/CH(2)Cl(2), triclinic P&onemacr;, a = 10.494(2) ?, b = 13.885(2) ?, c = 7.900(4) ?, alpha =106.52(2) degrees, beta = 90.85(3) degrees, gamma = 94.12(1) degrees, Z = 1.