Aggregation and dissolution of 4 nm ZnO nanoparticles in aqueous environments: influence of pH, ionic strength, size, and adsorption of humic acid

Metal oxide nanoparticles are used in a wide range of commercial products, leading to an increased interest in the behavior of these materials in the aquatic environment. The current study focuses on the stability of some of the smallest ZnO nanomaterials, 4 ± 1 nm in diameter nanoparticles, in aqueous solutions as a function of pH and ionic strength as well as upon the adsorption of humic acid. Measurements of nanoparticle aggregation due to attractive particle-particle interactions show that ionic strength, pH, and adsorption of humic acid affect the aggregation of ZnO nanoparticles in aqueous solutions, which are consistent with the trends expected from Derjaguin-Landau-Verwey-Overbeek (DLVO) theory. Measurements of nanoparticle dissolution at both low and high pH show that zinc ions can be released into the aqueous phase and that humic acid under certain, but not all, conditions can increase Zn(2+)(aq) concentrations. Comparison of the dissolution of ZnO nanoparticles of different nanoparticle diameters, including those near 15 and 240 nm, shows that the smallest nanoparticles dissolve more readily. Although qualitatively this enhancement in dissolution can be predicted by classical thermodynamics, quantitatively it does not describe the dissolution behavior very well.     

ZnO纳米粒子结构对光电量子限域特性的影响

Zn O作为一种宽禁带 (3 .3 6e V)高激子结合能 (60 me V)的半导体材料已引起人们的关注 .Zn O纳米粒子的比表面积较大 ,表面活性较高 ,对周围环境敏感 ,使其成为传感器制作中最有前途的材料[1] ,还在太阳能转换[2 ] 、发光材料[3] 、半导体表面修饰与敏化[4 ] 、纳米电子学以及分子电子学器件[5] 等领域显示出广阔的应用前景 .制约这些应用的关键是 Zn O纳米粒子表面和界面的电子结构和电荷转移行为 ,但有关此方面的报道较少 .本文用溶胶 -凝胶法制备了不同粒径的 Zn O纳米粒子 ,应用表面光电压谱 (SPS)和场诱导表面光电压谱 (FISPS…     

Synthesis of ZnO nanoparticles on a clay mineral surface in dimethyl sulfoxide medium

Nanocrystalline ZnO particles have been prepared with different methods using zinc cyclohexanebutyrate as precursor in dimethyl sulfoxide (DMSO) medium via alkaline hydrolysis. A series of preparations were carried out in the presence of layered silicates (kaolinite and montmorillonite). It was revealed by different measurement techniques that the presence of the clay minerals has a stabilization influence on the size of the ZnO nanocrystals. UV-vis absorption spectra show a blue shift when the nanoparticles are prepared in the presence of the clay minerals. The average particle diameters calculated from the Brus equation ranged from 2.6 to 13.0 nm. The UV-vis spectra of the synthesized nanoparticles did not show any red shift after 2-3 days, demonstrating that stable ZnO nanocrystals are present in the dispersions. The presence of the ZnO nanoparticles was also proven by fluorescence measurements. A number of the nanoparticles are incorporated into the interlamellar space of the clays, and an intercalated structure is formed as proven by X-ray diffraction (XRD) measurements. The size of the nanoparticles in the interlamellar space is in the range of 1-2 nm according to the XRD patterns. Transmission electron microscopy and high-resolution transmission electron microscopy investigations were applied to determine directly the particle size and the size distribution of the nanoparticles.     

Effect of ZnO nanoparticles on the thermal and mechanical properties of epoxy-based nanocomposite

Effect of ZnO nanoparticles particles on the mechanical properties and the curing behavior of an epoxy nanocomposite were studied. Nanocomposites were prepared using different loadings of pre-dispersed ZnO nanoparticles having an average size of 40 nm. The surface topography and morphology of the nanocomposites were studied using atomic force microscope (AFM). The mechanical properties of nanocomposites were studied using analytical techniques including dynamic mechanical thermal analysis and micro-Vickers hardness. Effects of ZnO nanoparticles on the curing behavior of these nanocomposites were investigated utilizing isothermal and non-isothermal differential scanning calorimeter techniques. In addition, chemical compositions of coatings containing different ZnO nanoparticles contents were studied using a Fourier transform inferred. It was found that, ZnO nanoparticles can effectively influence the mechanical properties of epoxy coating. In addition, lower curing degrees, and therefore crosslinking density of epoxy coating including higher ZnO nanoparticles were obtained. This effect was completely different at low and high loadings of the particles.     

Enhanced adsorption of arsenic onto maghemites nanoparticles: As(III) as a probe of the surface structure and heterogeneity

When normalized per unit of surface area, the quantity of arsenic adsorbed at the maghemite surface remains constant for particles between 300 and 20 nm. However, nanoparticles smaller than 20 nm exhibit enhanced adsorption capacity. The origin of this observed size-dependence for adsorption or "nano effect" is unclear. Arsenic was chosen as a probe of the surface structure to explore adsorption mechanisms occurring at the surface of maghemite nanoparticles (6 nm). Two factors contributing to the enhanced reactivity of nanoscale maghemites were determined. The first is related to a size-dependent structural modification of the surface of particles and the decrease of the occupancy of the tetrahedral site that leaves vacant, highly reactive adsorption sites. In particular, there is a site localized in a six-membered iron octahedral ring. This site is the only one for which an oxidation of As(III) occurs. The second factor relates to the thermodynamics of a decrease of the surface free energy. The high density of As adsorbed at the saturation of the surface can be related to crystal growth.     

In situ synthesis of polysaccharide nanoparticles via polyion complex of carboxymethyl cellulose and chitosan

Biocompatible polymer-magnetite hybrid nanoparticles were prepared by means of in situ synthesis of magnetite within polysaccharide hydrogel nanoparticles. Hydrogel nanoparticles were first fabricated by blending high-molecular-weight carboxymethyl cellulose as an anionic polymer, and low-molecular-weight chitosan as a cationic polymer to form polyion complexes (CC particles). These polyion complexes were then chemically crosslinked using genipin, a bio-based cross-linker, to form stable nanoparticles having a semi-IPN structure (CCG particles). Magnetite was lastly synthesized within CCG particles by the coprecipitation method to obtain polymer-magnetite hybrid nanoparticles (CCGM particles). The formations of CC, CCG and CCGM particles were mainly observed by transmittance, absorbance of genipin and TEM, respectively, and their hydrodynamic diameters and zeta-potentials were analyzed. It was confirmed that the hydrodynamic diameters and the zeta-potentials of these particles were significantly influenced by pH of the suspension, which was attributed to the charges of polymers. The diameters of CCGM particles were smaller than 200 nm at any pH conditions, suggesting the possibility to apply them as drug delivery carriers. CCGM particles exhibited the responsiveness to a magnetic field in addition to their high dispersion stability, indicating their potential to be utilized as a biomaterial for hyperthermia.     

Surface Enhanced Raman Spectroscopy Using Silver Nanoparticles: The Effects of Particle Size and Halide Ions on Aggregation

A surface enhanced Raman spectroscopy (SERS) investigation of the aggregation of silver nanoparticles formed via LVCC with diameters in the range 5–50 nm were studied. It was found that with 647.1 nm excitation maximum enhancement is observed using particles with 11 nm diameters. Upon addition of sodium halides, enhancement is proportional to the polarizability of the anion. Maximum enhancement was observed when the concentration of the anion is approximately equal to the concentration of the adsorbate.     

Synthesis of P(AA‐SA)/ZnO composite latex particles via inverse miniemulsion polymerization and its application in pH regulation and UV shielding

Poly(acrylic acid‐co‐sodium acrylate)/zinc oxide, P(AA‐SA)/ZnO, composite latex particles were synthesized by inverse miniemulsion polymerization. The ZnO nanoparticles were prepared by hydrothermal synthesis and undergone oleic acid (OA) surface treatment. The X‐ray diffraction pattern and FT‐IR spectra characterized the crystal structure and functional groups of OA‐ZnO nanoparticles. An appropriate formulation in preparing P(AA‐SA) latex particles, ensuring the dominant in situ particle nucleation and growth, was developed in our experiment first. Sodium hydroxide was chosen as a costabilizer, because of its ability to increase the deprotonation of acylic acid and enhance the hydrophilicity of monomer, acrylic acid besides providing osmotic pressure. The growth mechanism of P(AA‐SA)/ZnO composite particles was proposed. The OA‐ZnO nanoparticles were adsorbed on or around the surface of P(AA‐SA) latex particles by hydrophobic interaction, thus enhanced the interfacial tension over latex particles. The P(AA‐SA)/ZnO composite latex particles owned better thermal stability than pure latex particles. The pH regulation capacity was excellent for both ZnO and P(AA‐SA) particles. Combining P(AA‐SA) and ZnO nanoparticles into composite particles, the performance in pH regulation and UV shielding was discussed from our experimental results. © 2008 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem 46: 8081–8090, 2008     

Preparation, microstructure characterization and catalytic performance of Cu/ZnO and ZnO/Cu composite nanoparticles for liquid phase methanol synthesis

Stearate@Cu/ZnO nanocomposite particles with molar ratios of ZnO?∶?Cu = 2 and 5 are synthesized by reduction of the metal-organic Cu precursor [Cu{(OCH(CH(3))CH(2)N(CH(3))(2))}(2)] in the presence of stearate@ZnO nanoparticles. In the case of ZnO?∶?Cu = 5, high-angle annular dark field-scanning transmission electron microscopy (HAADF-STEM) combined with electron-energy-loss-spectroscopy (EELS) as well as attenuated total reflection Fourier transform infrared (ATR-IR) spectroscopy are used to localize the small amount of Cu deposited on the surface of 3-5 nm sized stearate@ZnO particles. For ZnO?∶?Cu = 2, the microstructure of the nanocomposites after catalytic activity testing is characterized by HAADF-STEM techniques. This reveals the construction of large Cu nanoparticles (20-50 nm) decorated by small ZnO nanoparticles (3-5 nm). The catalytic activity of both composites for the synthesis of methanol from syn gas is evaluated.     

Improving Lanthanide Nanocrystal Colloidal Stability in Competitive Aqueous Buffer Solutions using Multivalent PEG-Phosphonate Ligands

The range of properties available in the lanthanide series has inspired research into the use of lanthanide nanoparticles for numerous applications. We aim to use NaLnF(4) nanoparticles for isotopic tags in mass cytometry. This application requires nanoparticles of narrow size distribution, diameters preferably less than 15 nm, and robust surface chemistry to avoid nonspecific interactions and to facilitate bioconjugation. Nanoparticles (NaHoF(4), NaEuF(4), NaGdF(4), and NaTbF(4)) were synthesized with diameters from 9 to 11 nm with oleic acid surface stabilization. The surface ligands were replaced by a series of mono-, di-, and tetraphosphonate PEG ligands, whose synthesis is reported here. The colloidal stability of the resulting particles was monitored over a range of pH values and in phosphate containing solutions. All of the PEG-phosphonate ligands were found to produce non-aggregated colloidally stable suspensions of the nanoparticles in water as judged by DLS and TEM measurements. However, in more aggressive solutions, at high pH and in phosphate buffers, the mono- and diphosphonate PEG ligands did not stabilize the particles and aggregation as well as flocculation was observed. However, the tetraphosphonate ligand was able to stabilize the particles at high pH and in phosphate buffers for extended periods of time.     

Optical properties of zinc oxide nanoparticles and nanorods synthesized using an organometallic method.

The emission properties of nanocrystalline ZnO particles prepared following an organometallic synthetic method are investigated. Spherical particles and nanorods are studied. The shape of the particles and the ligands used are shown to influence the luminescence properties in the visible domain. Two different emissions are observed at 440 nm (approximately 2.82 eV) and at 580 nm (approximately 2.14 eV) that are associated with the presence of surface defects on the particles. The first emission corresponds to the well-known yellow emission located at 580 nm (approximately 2.14 eV) with a lifetime of 1850 ns for 4.0 nm size ZnO nanoparticles. The second emission at 440 nm (approximately 2.82 eV) is observed when amine functions are present. This strong blue emission is associated with an excitation energy less than that associated with the yellow emission displaying a lifetime of nine nanoseconds. A possible hole trapping effect by the amine groups on the surface of the ZnO particles is discussed as the origin of this emission. The modification of the intensities between the two visible emissions for different particle shapes is proposed to be related to a specific location of the amine ligands on the surface of the particles.     

Photocatalytic degradation of anionic surfactant using zinc oxide nanoparticles

In this paper the photocatalytic degradation of anionic surfactant LABS was studied by a batch process using ZnO nanoparticles with diameter size of 20 nm catalyst on irradiation with UV light and their behavior comparatively examined with respect to ZnO commercial powder. The effect of parameters such as initial surfactant concentration, initial solution pH has been studied. Also degradation at LABS in the presence of an electron acceptor like potassium peroxydisulfate and effect of anion presence on surfactant degradation has been systematically investigated. The obtained result demonstrated a high photocatalytic activity of nanosize semiconducting particles.     

Adsorption energetics of CO on supported Pd nanoparticles as a function of particle size by single crystal microcalorimetry

The heat of adsorption and sticking probability of CO on well-defined Pd nanoparticles were measured as a function of particle size using single crystal adsorption microcalorimetry. Pd particles of different average sizes ranging from 120 to 4900 atoms per particle (or from 1.8 to 8 nm) and Pd(111) were used that were supported on a model in situ grown Fe(3)O(4)/Pt(111) oxide film. To precisely quantify the adsorption energies, the reflectivities of the investigated model surfaces were measured as a function of the thickness of the Fe(3)O(4) oxide layer and the amount of deposited Pd. A substantial decrease of the binding energy of CO was found with decreasing particle size. Initial heat of adsorption obtained on the virtually adsorbate-free surface was observed to be reduced by about 20-40 kJ mol(-1) on the smallest 1.8 nm sized Pd particles as compared to the larger Pd clusters and the extended Pd(111) single crystal surface. This effect is discussed in terms of the size-dependent properties of the Pd nanoparticles. The CO adsorption kinetics indicates a strong enhancement of the adsorbate flux onto the metal particles due to a capture zone effect, which involves trapping of adsorbates on the support and diffusion to metal clusters. The CO adsorption rate was found to be enhanced by a factor of ～8 for the smallest 1.8 nm sized particles and by ～1.4 for the particles of 7-8 nm size.     

紫外光照射下ZnO超微粒子表面上的光反应

由于半导体超微粒子具有独特的尺寸量子化效应和表面效应^[1~6],它在利用太阳能光催化降解有机污染物,有机光合成及光电转化等领域中有着极其广泛的应用.目前,大量的工作集中在超微颗粒表面上有机物的光反应过程的研究^[7].     

Evidence for patchy lipid layers on gold nanoparticle surfaces

Gold nanoparticles bearing multiple surface ligands are becoming favored candidates as multifunctional targeting, imaging, and therapeutic vehicles for biomedicine. The question of spatial location of different ligands on nanoparticle surfaces, especially with those of diameters less than 100 nm, is an important one that is difficult to quantitatively address. Here we functionalize the surface of 20, 50, and 90 nm gold nanoparticles with two different lipids, both single and mixed, using two different surface chemical procedures. Mass spectrometry supports the presence of both lipids in the mixed-lipid systems on nanoparticles, while electron microscopy evidence shows domain sizes for one lipid apparently a quarter to a half the projected diameter for 50 and 90 nm particles; but for 20 nm particles, there is no evidence for the existence of patches of the two lipids. Larger gold nanoparticles (90 nm) can be decorated with an array of 12 nm gold nanoparticles by use of a third lipid and antibody-antigen connectors; the display of the 12 nm particles about the 90 nm particles can be controlled to some extent by the initial surface chemistry and is quantified via a new angle analysis procedure.     

Synthesis of cobalt-doped ZnO/rGO nanoparticles with visible-light photocatalytic activity through a cobalt-induced electrochemical method

ZnO is a semiconductor photocatalyst widely applied in photodegradation of organic pollutants and in photoelectric conversion. ZnO exhibits low photocatalytic activity due to poor absorption in the visible region. In this work, a novel cobalt-induced electrochemical growth method was developed to synthesize cobalt-doped ZnO/rGO nanoparticles in an aqueous solution at room temperature. Cobalt-doped ZnO/rGO nanoparticles exhibited wider visible-light absorption band ranging from 400 nm to 700 nm due to cobalt doping. The surface structure of ZnO formed by the cobalt-induced electrochemical method without other ions is suitable for photocatalytic reactions. The cobalt-doped ZnO/rGO nanoparticles were found to exhibit in photodegradation and photo-electrochemical measurements and exhibited enhanced photocatalytic activity under visible-light irradiation.     

Preparation and characterization of the biomineralized zinc oxide particles in spider silk peptides

In this work, hierarchical ZnO particles were prepared using a biomineralization strategy at room temperature in the presence of peptides acidified from spider silk proteins. A mechanism of the mineralization of the ZnO particles was that the affinity of original ZnO nanoparticles and zinc ions in the peptide chains played an important role in controlling the biocrystallizing formation of the pore ZnO particles. The intensity of their visible green luminescence was enhanced with increases of the mineralization time due to the porous surface defects. The hierarchical ZnO materials with biomolecules will facilitate their photoluminescence spectra applications as biosensors or optoelectronic nanodevices in the future, when covalently coupled with peptides or other biomolecules to achieve patterned growth over large areas of substrate.     

Preparation, characterization and adhesive properties of di- and tri-hydroxy benzoyl chitosan nanoparticles

Modified chitosans with 3,4-di-hydroxy benzoyl groups (CS-DHBA) and 3,4,5-tri-hydroxy benzoyl groups (CS-THBA) were synthesized and their nanoparticles were prepared via ionic crosslinking by tripolyphosphate (TPP). The chemical structure and degree of substitution (DS) of di-and tri-hydroxy benzoyl chitosans are determined by FTIR and 1H-NMR spectroscopy. The morphology of particles, size distribution and zeta potential of nanoparticles were studied using transmission electron microscopy (TEM) and dynamic light scattering (DLS), respectively. The mean diameters of particles of CS-DHBA and CS-THBA nanoparticles were 144 nm and 112 nm, respectively. It was found that the particles size decreased slightly with decreasing the degree of substitution and increasing degree of deacetylation (DD), due to increasing of ionic crosslinking of ammonium ions and polyanions of tripolyphosphate. The TEM photographs of CS-DHBA show that these particles are spherical in shape, but the particles of CS-THBA show some aggregation. In addition, the solubility and the mechanical properties of the prepared modified chitosans and their nanoparticles were evaluated for bio-adhesive and biomedical application. The results of solubility tests indicated that, the CS-DHBA and CS-THBA have higher solubility at pH > 7 comparing to CS. Also the CS-DHBA, CS-THBA and their nanoparticles showed a significant adhesive capacity and enhanced tensile strength and tensile modulus.     

Size-tunable emission from 1,3-diphenyl-5-(2-anthryl)-2-pyrazoline nanoparticles

Organic nanoparticles of 1,3-diphenyl-5-(2-anthryl)-2- pyrazoline (DAP) ranging in average diameters from 40 to 160 nm were prepared through the reprecipitation method. The average diameters of the particles were controlled by variation of the aging time. We found that DAP nanoparticles exhibit the size-dependent optical properties. The absorption transitions of the nanoparticles at the lower-energy side experience a bathochromic shift with an increase in the particle size as a result of the increased intermolecular interactions, while the higher-energy bands of anthracene split possibly due to the electronic coupling between the pyrazoline ring of one molecule and the anthracene moiety of the neighboring molecule. Most interestingly, the nanoparticle emission in the blue light region from pyrazoline chromophore shifts to shorter wavelengths with an increase in the particle size, accompanied with a relatively gradual dominance of the emission at about 540 nm from an exciplex between the pyrazoline ring of one molecule and the anthracene moiety of the neighboring molecule. The hypsochromic shift in the emission of DAP nanoparticles was identified as originating from the pronounced decrease in the Stokes shift due to the restraint of vibronic relaxation and the configuration reorganization induced by the increased intermolecular interaction.     

Fabrication of zinc oxide/poly(styrene) grafted nanocomposite latex and its dispersion

Zinc oxide nanoparticles, with an average size of about 40 nm, were encapsulated by polystyrene using in situ emulsion polymerization in the presence of 3-methacryloxypropyltrimethoxysilane (MPTMS) as a coupling agent and polyoxyethylene nonylphenyl ether (OP-10) as a surfactant. Polymerization mechanism of nanocomposite latex was discussed. Transmission electron microscopy (TEM) proved the presence of ZnO nanoparticle appeared to be monodisperse in nanosize in polymer composite particles. ZnO/PS nanocomposites were characterized by Fourier transform infrared spectra (FT-IR), X-ray photoelectron spectroscopy (XPS), thermo-gravimetric analysis (TGA) and differential scanning calorimetry (DSC). The results of FT-IR and XPS revealed that the surface of ZnO particle was successfully grafted by PS through the link of the coupling agent between ZnO and polymer. TGA and DSC results indicated an enhancement of thermal stability of composite materials compared with the pure polymer. SEM (scanning electron microscope) images showed a perfect dispersion of the ZnO particles in latex film. In addition, UV-visible absorption measurements demonstrated that the ZnO/PS composite coatings display a perfect performance of absorbing UV light.