The copolymerization of carbonyl sulfide with aziridines such as ethylenimine, propylenimine, and N-ethylethylenimine was studied in various organic solvents. The copolymerizations occurred easily without the addition of any catalyst and gave white powdery crystalline copolymers. The copolymers produced were insoluble in many organic solvents, but soluble in p-chlorophenol and dimethyl sulfoxide. The elementary analyses and the infrared spectra showed that alternating copolymers which have a thiourethane structure were produced. In the copolymerization of carbonyl sulfide with ethylenimine, both the polymer yield and the molecular weight of the resulting polymer increased with the use of a solvent having a higher dielectric constant, and also with an increase in the ratio of carbonyl sulfide to imine in the feed. The rate of copolymerization of carbonyl sulfide with aziridines was in the order of ethylenimine > propylenimine > and N-ethylethylenimine. Irradiation of the copolymers improved their thermal properties and increased their melting point. 相似文献
The copolymerization of aziridines and cyclic imides was studied. Aziridines copolymerized alternately with cyclic imides to give crystalline polyamides. Ethylenimine and succinimide copolymerized to nylon 2,4, melting near 300°C., without any catalyst. Similarly, the corresponding crystalline polyamides were obtained from the systems of 1,2-propylenimine–succinimide, ethylenimine–glutarimide, and ethylenimine–phthalimide. The copolymerization of aziridines and cyclic imides in the presence of BF3OEt2 gave a copolymer which was rich in aziridine units, whereas, the addition of triethylamine had no influence on the copolymer composition. A mechanism of copolymerization was proposed based on the facts that N-tetramethylenesuccinamide was obtained by the reaction of pyrrolidine and succinimide, N-acetylethylenimine reacted with acetamide to yield N,N′-diacetylethylenediamine and that the rate of this copolymerization was dependent on the electrophilicity of imide. 相似文献
The structures of copolymers of aziridines with cyclic imides were determined by means of infrared spectrometry, paper electrophoresis of the hydrolyzate, and NMR spectrometry. The structure of the repeating unit in the copolymer of ethylenimine with succinimide was \documentclass{article}\pagestyle{empty}\begin{document}$\rlap{--} ({\rm CH}_2 {\rm CH}_2 {\rm NHCOCH}_2 {\rm CH}_2 {\rm CONH}\rlap{--} ) $\end{document}. The endgroups of the copolymer were N-acylethylenimine ring, N-substituted succinimide ring, and primary amide group. The copolymer of ethylenimine with N-ethylsuccinimide had the repeating unit of \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm CH}_2 {\rm CH}_2 {\rm NHCOCH}_2 {\rm CH}_2 {\rm CON}({\rm C}_2 {\rm H}_5 )\rlap{--} ] $\end{document} and the endgroups of N-acylethylenimine and N-substituted succinimide ring. N-Ethylethylenimine did not copolymerize with succinimide, but in the presence of water, the reaction occurred to give an amorphous polymer. This copolymer had the repeating unit \documentclass{article}\pagestyle{empty}\begin{document}$ \rlap{--} [{\rm CH}_2 {\rm CH}_2 {\rm NHCOCH}_2 {\rm CH}_2 {\rm CON}({\rm C}_2 {\rm H}_5 )\rlap{--} ] $\end{document} and the endgroups were N-substituted succinimide ring and amine group but not N-acylethylenimine ring. On the basis of this structural information, the initiation reaction was discussed. 相似文献
Attempts were made to copolymerize p-aminostyrene, p-acetamidostyrene, N-methyl-p-aceta-midostyrene, N-(4-vinylphenyl) phthalimide, N-vinyl succinimide, and N-vinyl phthalimide with methyl acrylate complexed with ethyl aluminum sesquichloride. Only reactions involving N-(4-vinylphenyl)phthalimide and N-vinyl phthalimide yielded alternating copolymers. N-vinyl succinimide gave nonalternating copolymers insoluble in common solvents and the other monomers did not copolymerize. In some cases, the conventional radical copolymers were prepared for comparison purposes. The reactivity ratios of the free-radical initiated copolymerization of methyl acrylate (I) with N-(4-vinylphenyl)phthalimide (II) were r1 = 0.14 and r2 1.56. The alternating copolymers were studied by 1H-NMR and 13C-NMR spectroscopy. The alternating copolymer of N-(4-vinylphenyl)phthalimide with methyl acrylate was hydrazinolyzed to form the alternating copolymer of methyl acrylate with p-aminostyrene. Hydrazinolysis of the alternating copolymer of methyl acrylate with N-vinyl phthalimide removed the phthalimide moiety and generated vinyl amine units which readily cyclized with neighboring methyl acrylate units to form copolymers that contained five-membered lactam rings. The infrared (IR) spectra of the hydrazinolyzed products contain bands due to amine or amide groups and are devoid of the characteristic bands of the phthalimide ring. 相似文献
The copolymerization of carbon monoxide and aziridines such as ethylenimine and propylenimine was carried out by γ-ray irradiation. Aziridines and carbon monoxide were allowed to copolymerize under γ-ray irradiation from a Co60 source and gave a crystalline solid copolymer. The yield of the copolymer increased with reaction temperature. The composition of copolymers obtained did not depend on the feed ratio of monomers and was found to be almost equimolar. The copolymer of ethylenimine and carbon monoxide melted at about 322–335°C. with decomposition and has an infrared spectrum identical with that of poly-β-alanine obtained by the hydrogen-migration polymerization of acrylamide. The hydrolyzed product of the ethylenimine–carbon monoxide copolymer was confirmed to be β-alanine by paper chromatography. These results lead to the conclusion that the copolymerization of aziridines and carbon monoxide took place alternatively by γ-ray irradiation, and produced crystalline poly-β-alanines. 相似文献
The hypochromicity of poly(ethylene glycol methyl ether)-b-poly(ethylenimine) containing thymine derivatives as pendants was observed in water, 0.1N HCl and 0.1N NaOH solutions. The hypochromic effect of this compound is between 30% and 40%. Interactions between this polynucleotide analog and poly-A was only found in water but not in 0.1N HCl or 0.1N NaOH solution. 相似文献
Polymers containing the N-(4-hydroxy-3-nitrophenyl)succinimide residue were designed in order to achieve acyl activation of a reacting carboxylic acid in the solid phase. These polymers were prepared through the following three routes: (a) styrene was allowed to copolymerize with N-(4-hydroxy-3-nitrophenyl)- or N-(4-acetoxy-3-nitrophenyl)maleimide, (b) styrene was copolymerized with N-(4-acetoxyphenyl)maleimide in the presence of divinylbenzene (DVB), and the copolymer obtained was hydrolyzed and nitrated, (c) a copolymer of maleic anhydride and styrene was reacted with p-aminophenol, followed by nitration. The polymers prepared by routes b and c were converted to the activated polymer esters of N-blocked amino acids and peptides by using dicyclohexylcarbodiimide (DCC). The acylated polymers thus obtained were treated with amino acid esters and found to give peptides quantitatively without racemization. 相似文献
The equilibrium constants of the charge-transfer complex monomers of phenylvinyl alkyl ethers (I) and thioethers (II) with maleic anhydride (MAn) were determined by the transformed Benessi—Hildebrand NMR method, and it was found that the bulkiness of alkyl groups had no significant influence on the equilibrium constant. The rate of copolymerization, however, was largely dependent on the bulkiness of the alkyl groups in the phenylvinyl alkyl ether series. The rate of copolymerization of I (R = Et; sec-Bu) and II (R = Et; sec-Bu) with MAn was proportional to the square root of AIBN concentration, and intrinsic viscosity of poly-I (R = Et)-co-MAn was proportional to the reciprocal square root of AIBN concentration. Spontaneous copolymerization did not occur, but I (R = Et) copolymerizes with MAn in the presence of oxygen; II did not copolymerize with MAn in the presence of oxygen; nor in the presence of peroxide initiators. In the copolymerization of I (R = Et) and MAn, it was found that molecular weight increases with conversion. By applying the generalized model described by Shirota and co-workers, the reactivity ratios k1c/k12 and k2c/21 for copolymerization of I (R = Et) and II (R = Et) with MAn were calculated from the change of copolymerization rate with monomer feed at constant total monomer concentration. 相似文献
Vinyl-type monomers containing the pyrrole ring, such as 2-vinylpyrrole (2-VPyrr), N-(pyrrol-2-yl)methylacrylamide (PMA), N-methyl, N-(pyrrol-2-yl)methylacrylamide (MPMA), 2-allylpyrrole (2-AP), β-(pyrrol-1-yl)ethyl vinyl ether (PEVE), 2-diallyl-aminomethylpyrrole (DAMP), and 3-(2-pyrrolylmethyleneimino)propene-1 (PIP) were synthesized by various reactions involving characteristic properties of the pyrrole ring. Radical homopolymerizations and copolymerizations of these monomers were studied. In the homopolymerization of conjugated monomers such as 2-VPyrr and PMA, chain transfer to the pyrrole-containing monomer was remarkable but not degradative. The copolymerization parameters, that is, the values of r1, r2, Q1, and e1 of 2-VPyrr, were determined to be 0.066, 0.69, 5.53, and ?1.36, respectively in the copolymerization of 2-VPyrr (M1) with MMA (M2). The Q and e values of the monomers containing a heteroaromatic ring such as 2-vinylpyrrole, 2-vinylfuran, and 2-vinylthiophene were evaluated by the molecular orbital theory. The e value of PMA was found to be negative (?0.64) in the copolymerization with styrene, although e for acrylamide derivatives is generally positive. This may be explained by the intermolecular hydrogen bonding between the carbonyl group and NH group of PMA. That is, attraction or polarization of π-electrons in the vinyl group of PMA is weakened by such hydrogen bonding. From the results of copolymerization of 2-AP with various comonomers, the comonomers could be classified into three categories: class a monomers, in which both Q and e values are largely positive, can copolymerize with 2-AP; class b monomers, having small e values, homopolymerize and can not copolymerize with 2-AP; class c monomers, in which both Q and e values are small. The Q and e values of the comonomer must be largely positive in order to permit copolymerization with an allyl-type monomer. 相似文献
It was found that carbon disulfide copolymerizes with N-(β-cyanoethyl) ethylenimine by using water as a catalyst. The copolymerization was conducted in detail by using water as a catalyst in the temperature range between 0 and 50°C with various initial concentrations of carbon disulfide and N-(β-cyanoethyl)ethylenimine in the absence of solvent. The copolymer obtained was always composed of the two monomers: 1:1 ratio, independent of the initial concentration of the monomers. The copolymer was white solid material soluble in dimethyl sulfoxide, insoluble in other usual organic solvents and decomposed at 155°C. Spectroscopic analysis of the copolymer combined with the results of elemental analysis indicates that the copolymer had the following structure: 相似文献
Block copolymers, composed of a hydrophobic block [poly(N-t-butylbenzoyl ethylenimine) or poly(N-lauroyl ethylenimine)] and a hydrophilic block [poly(N-propionyl ethylenimine)], synthesized by cationic ring-opening polymerization of 2-substituted Δ2-oxazolines, were selectively deacylated by acid hydrolysis. The hydrolysis process was monitored by using 1H-NMR. The results show that the propionyl groups could be removed from the hydrophilic block of the polymer chain without touching the hydrophobic block, if appropriate reaction conditions were used. 相似文献
Summary : Copolymerization of N-vinyl succinimide and n-butyl acrylate in the presence of dibenzyl trithiocarbonate as a reversible addition-fragmentation chain transfer agent was investigated. The linear dependence of molecular mass on conversion and low values of polydispersity index confirmed pseudo-living mechanism of the process. For the first time the soluble copolymers of N-vinyl succinimide and n-butyl acrylate with high composition homogeneity have been synthesized by copolymerization in bulk. The copolymerization kinetics was studied by NMR 1H spectroscopy; the reactivity ratios were determined: rVSI = 0.11, rBA = 2.54. The copolymer microstructure was estimated; it was shown that in conditions of RAFT polymerization gradient copolymers enriched with BA on the tails of the macromolecule and with VSI in the middle can be obtained. The method of elimination of trithiocarbonate fragment by the reaction with an excess of AIBN was proposed leading to formation of the simplest gradient structure of N-vinyl succinimide – n-butyl acrylate copolymer. 相似文献
The alternating copolymerization of carbon monoxide and ethylenimine to give poly-β-alanine could be initiated by γ-irradiation but hardly by α,α'-azobisisobutyronitrile (AIBN). It was found that in the case of the addition of olefin, this system could be copolymerized even by AIBN and that, in the γ-ray copolymerization of carbon monoxide and ethylenimine, the addition of olefin brought about an increase in the copolymer yield. No difference was observed between the nature of copolymers obtained by AIBN and those obtained by γ-irradiation, except in the system carbon monoxide–ethylenimine–ethylene. An increase in the amount of reacted olefin gave rise to an increase in copolymer yield. The melting points of the copolymers were in the range 295–335°C. The infrared spectra, x-ray diffraction diagrams, and NMR spectra of the copolymers were almost identical with that of poly-β-alanine obtained by the hydrogen-migration polymerization of acrylamide. Paper chromatographic analysis of the hydrolysis product of the copolymer showed the existence of β-alanine, ethylamine, and δ-aminovaleric acid homolog in the products. From these results, it was concluded that terpolymerization of carbon monoxide, ethylenimine, and olefin took place in the presence of AIBN or γ-irradiation which gave a crystalline solid copolymer containing the units of nylon 3 and nylon 5. A mechanism of this copolymerization was proposed on the basis of these results. 相似文献
Copolymerization of N-carboxy N?-carbobenzoxy L -lysine anydride with N-carboxy β-benzyl L -aspartate anhydride was initiated with n-butylamine in acetonitrile. The copolymerization proceeded almost homogeneously except for the initial stage, when the proportion of N-carboxy anhydride (NCA) in the polymerization mixture varied from 25 to 75 mol %. This was due to the fact that the copolypeptides formed were soluble or highly swollen in the solvent, in contrast to the homopolymerization of NCAs such as N?-carbobenzoxy L -lysine NCA and β-benzyl L -aspartate NCA in acetonitrile, which proceeds heterogeneously. The compositions of the copolymers obtained were, within experimental error, the same as their monomer feed compositions. The initial rates of copolymerization were almost the same as the rate of homopolymerization of β-benzyl L -aspartate NCA, which propagates with a nonhelical polypeptide, but were slower than the rate of homopolymerization of N?-carbobenzoxy L -lysine NCA, which propagates with a helical polypeptide. 相似文献
A series of N-(dialkylaminoalkyl)acrylamides was synthesized by reductive amination of N-(1,1-dimethyl-3-oxobutyl)acrylamide (diacetone acrylamide) and by the reaction of either an alkenylamine or an amino alcohol with acrylonitrile. These monomers homopolymerize and copolymerize readily to form high molecular weight products. The solubility of the monomers and their homopolymers in water ranges from soluble to insoluble at room temperature. The insoluble materials can be quaternized readily to produce water-soluble products. The solubility of the homopolymers in water decreases with increasing temperature. Glass transition and decomposition temperatures of the homopolymers are reported. 相似文献
Three-component condensation of trifluoromethanesulfonamide with paraformaldehyde and succinamide depending on the reaction
conditions led alongside bis(trifluoromethanesulfonamido)methane to the formation of a substitution product, bis[(trifluoromethylsulfonyl)aminomethyl]succinamide,
or to a cyclization product, N-[trifluoromethylsulfonyl)aminomethyl]succinimide. The attempt to obtain the latter by the reaction of the trifluoromethanesulfonamide
sodium salt CF3SO2NHNa with N-chloromethylsuccinimide unexpectedly resulted in N,N-bis(succinimidomethyl)-trifluoromethanesulfonamide. Analogously the reaction of CF3SO2NHNa with N-chloromethyl-phthalimide gave N,N-bis(phthalimidomethyl)trifluoromethanesulfonamide. The reaction of CF3SO2NHNa with succinimide and phthalimide in water and alcohol solution resulted in the ring opening and further transformation
of the formed monosubstituted N-(trifluoromethylsulfonyl)amides of succinic and phthalic acids. 相似文献
The rate of solution copolymerization of styrene (M1) and 2-hydroxyethyl methacrylate (M2) was investigated by dilatometry. N,N-dimethyl formamide, toluene, isopropyl alcohol, and butyl alcohol were used as solvents. Polymerization was initiated by α,α′-azobisisobutyronitrile at 60°C. The initial copolymerization rate increased nonlinearly with increasing 2-hydroxyethyl methacrylate (HEMA)/styrene ratio. The copolymerization rate was promoted by solvents containing hydroxyl groups. Two different approaches were used for the prediction of copolymerization rates. The relationships proposed for the copolymerization rates calculation involve the effects of the total monomer concentration, mole fraction of HEMA, and of the solvent type. Different reactivity ratios were found in polar and nonpolar solvents: r1 = 0.53, r2 = 0.59 in N,N-dimethyl formamide, isopropyl alcohol and n-butyl alcohol; r1 = 0.50, r2 = 1.65 in toluene. The usability of these reactivity ratios was confirmed by batch experiments. 相似文献