“Clickable” polymers via a combination of RAFT polymerization and isocyanate chemistry

We describe a facile, one‐pot, two‐step polymerization towards synthesizing block co‐polymers bearing reactive isocyanate functional groups. Reversible addition fragmentation chain transfer (RAFT) polymerization is used to mediate the co‐polymerization of isocyanate‐bearing monomers dimethyl meta‐isopropenyl benzyl isocyanate (TMI) and 2‐isocyanatoethyl methacrylate (ICEMA) with styrene and methyl methacrylate (MMA), respectively. ICEMA was incorporated into the polymer at a faster rate than TMI and its unhindered isocyanate group was found to be more reactive than the hindered isocyanate group of TMI. Both the TMI/styrene and the MMA/ICEMA systems maintain the reactivity of the isocyanate functionality, which was exploited by attaching representative hydroxyl‐bearing small and large molecules as well as solid substrates to the block co‐polymers. Thus, we demonstrate the versatility of the block co‐polymer system as a basis for forming branched polymers or as grafts for a solid substrate. © 2011 Wiley Periodicals, Inc. J Polym Sci Part A: Polym Chem, 2011     

Novel synthesis of photocrosslinkable polymers

A new preparative route to photocrosslinkable polymers in which the polymers are produced directly from the polymerization of vinyl monomers having photocrosslinkable groups has been investigated. The photosensitive resins thus produced have higher sensitivity and resolution than conventional photosensitive resins. The monomers were synthesized from the esterification of vinylphenols or vinyl β-chloroethyl ether with cinnamic acid, β-styrylacrylic acid, and their homologs, and from the etherification of vinyl β-chloroethyl ether with hydroxychalcones. Homopolymerizations of these monomers and their copolymerizations with other comonomers were investigated with the use of both radical and ionic initiators. It is shown that radical polymerization of the monomers gave soluble polymers only at low conversion. Anionic initiators did not initiate polymerization. Cationic polymerization imparted soluble polymers in high yield, except for the monomers bearing cyano groups, which generally gave insoluble polymers. Infrared and NMR spectroscopic investigation of the cationically obtained soluble polymers and comparative investigation by cationic polymerization of model compounds indicated that polymerization of the monomers proceeds through the vinyl double bond without affecting the photosensitive unsaturated bond. Thus, linear photocrosslinkable polymers with an intact photoreactive group may be produced by cationic polymerization. In general, these polymers have uniform structure and modifiable physical properties depending on the monomer used. The polymer thus obtained from β-vinyloxyethyl cinnamate has been shown to have excellent properties for use as a photo-resist.     

Graft Copolymers

The preparation of graft copolymers is a domain of polymer chemistry that has received considerable interest. Grafting of vinyl monomers to natural and synthetic polymers by means of chemical or radiation-initiated polymerization has been suggested as a potentially good means of altering the properties of the base polymer. Graft polymerization is different from random or block copolymerization in that it leaves the main polymeric backbone essentially intact. A graft copolymer may combine some of the characteristic properties of each polymer or have properties entirely different from either of the components. Hence such products made of selected polymer combinations can have highly specific properties tailor-made for a particular application.     

Living Cationic Ring-Opening Polymerization of Hetero Diels–Alder Adducts to Give Multifactor-Controlled and Fast-Photodegradable Vinyl Polymers

Precise control of multiple structural parameters associated with vinyl polymers is important for producing materials with the desired properties and functions. While the development of living polymerization methods has provided a way to control the various structural parameters of vinyl polymers, the concomitant control of their sequence and regioregularity remains a challenging task. To overcome this challenge, herein, we report the living cationic ring-opening polymerization of hetero Diels–Alder adducts. The scalable and modular synthesis of the cyclic monomers was achieved by a one-step protocol using readily available vinyl precursors. Subsequently, living polymerization of the cyclic monomers was examined, allowing the synthesis of vinyl polymers while controlling multiple factors, including molecular weight, dispersity, alternating sequence, head-to-head regioregularity, and end-group functionality. The living characteristics of the developed method were further demonstrated by block copolymerization. The synthesized vinyl polymers exhibited unique thermal properties and underwent fast photodegradation even under sunlight.     

Vinyl Polymerization. 436. Effect of Magnetic Field on Uncatalyzed Polymerization

The radical polymerization of vinyl monomers initiated with several kinds of hydrophilic macromolecule was carried out in a magnetic field. The magnetic field promoted the polymerization; the conversion of monomers and the molecular weight of the polymers obtained increased with increasing field strength in the range of 0–0.1 T. The dependence of the composition and tacticity of the mother polymer on the magnitude of the magnetic field was studied. Using graft or block copolymers, which consisted of hard and soft segments, the effect of a magnetic field was further investigated. The degree of hardness and tightness of the hydrophobic areas (reaction areas) formed by the mother polymer in the aqueous solution was found to affect the magnetic field effect on the uncatalyzed polymerization. The overall activation energy obtained in the magnetic field was almost equal to that obtained without a magnetic field.     

Stereoselective Polymerization of Aromatic Vinyl Polar Monomers

Polar vinyl polymers, a class of polymers with polar groups as side chains, have significant advantages over conventional nonpolar polyolefin materials in terms of viscosity, toughness, interfacial properties (dyeability and printability), and compatibility with solvents or other polymers. Among them, aromatic polar vinyl polymers are of interest because of their good heat resistance properties. In addition, stereoselective polymerization of aromatic polar vinyl monomers has been rapidly developed because the steric structure of the polymer has a significant impact on its physical properties. In this paper, we review the research progress of stereoselective polymerization catalysts for aromatic polar vinyl monomers in recent years, discuss in detail the influence of ligand structure, electronic effect of substituents, spatial site resistance effect, central rare earth metal species and polymerization solvents on the activity and stereoselectivity of polymerization reactions, and explore the possible mechanism of polymerization reaction.     

Effective grafting of polymers onto ultrafine silica surface: Photopolymerization of vinyl monomers initiated by the system consisting of trichloroacetyl groups on the surface and Mn2(CO)10

The effective grafting of vinyl polymers onto an ultrafine silica surface was successfully achieved by the photopolymerization of vinyl monomers initiated by the system consisting of trichloroacetyl groups on the surface with Mn₂(CO)₁₀ under UV irradiation at 25 °C. The introduction of trichloroacetyl groups onto the surface of silica was achieved by the reaction of trichloroacetyl isocyanate with surface amino groups, which were introduced by the treatment of silica with 3‐aminopropyltriethoxysilane. During the polymerization, the corresponding polymers were effectively grafted onto the surface, based on the propagation of polymer from surface radicals formed by the interaction of trichloroacetyl groups and Mn₂(CO)₁₀. The percentage of poly(methyl methacrylate) grafting onto the silica reached 714.6% after 90 min. The grafting efficiency (proportion of grafted polymer to total polymer formed) in the polymerization of methyl methacrylate was very high, about 80%, indicating the depression of formation of ungrafted polymer. Polymer‐grafted silica gave a stable colloidal dispersion in good solvents for grafted polymer. © 2001 John Wiley & Sons, Inc. J Polym Sci Part A: Polym Chem 39: 2157–2163, 2001     

Free-radical polymerization of vinyl esters using fluoroalcohols as solvents: Effect of monomer structure on stereochemistry

Free-radical polymerization of vinyl esters including vinyl propionate (VPr), vinyl isobutylate (ViBu), vinyl 2,2-dimethylbutylate (VDMB), vinyl 2,2-dimethylvalerate (VDMV), vinyl 2,2-bis(trifluoromethyl)propionate (VF6Pi), and vinyl benzoate (VBz) was carried out using fluoroalcohols as solvents, and the tacticity of the obtained polymers was determined by NMR analysis of the produced poly(vinyl alcohol) (PVA). The polymerization of VPr, ViBu, VDMB, and VDMV, which are bulkier than VAc, in fluoroalcohols afforded polymers rich in heterotacticity (up to mr = 61%) similar to that of vinyl pivalate (VPi) whereas VAc is known to give a syndiotactic polymer under the reaction conditions used here. The polymerization of VF6Pi, which is the bulkiest among the monomers used in this study, gave a polymer rich in syndiotacticity in bulk and in fluoroalcohols regardless of the structure of the solvents. On the other hand, the polymerization of VBz in fluoroalcohols gave polymers with a higher isotacticity (up to mm = 33%) than bulk polymerization. Thus the monomer structure strongly affected the stereochemistry of the free-radical polymerization of vinyl esters in fluoroalcohols. © 1999 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 37: 2677–2683, 1999     

Neodymium Catalyst for the Polymerization of Dienes and Polar Vinyl Monomers

Ziegler–Natta catalysts have played a major role in industry for the polymerization of dienes and vinyl monomers. However, due to the deactivation of the catalyst, this system fails to polymerize polar vinyl monomers such as vinyl acetate, methyl methacrylate, and methyl acrylate. Herein, a catalytic system composed of NdCl₃⋅3TEP/TIBA is reported, which promotes a quasi‐living polymerization of dienes and is also active for the homopolymerization of polar vinyl monomers. Additionally, this catalytic system generates polymyrcene‐b‐polyisoprene and poly(myrcene)‐b‐poly(methyl methacrylate) diblock copolymers by sequential monomer addition. To encourage the replacement of petroleum‐based polymers by environmentally benign biobased polymers, polymerization of β‐myrcene is demonstrated with a catalytic activity of ≈106 kg polymer mol Nd⁻¹ h⁻¹.     

Asymmetric polymerization of aromatic isocyanates with optically active anionic initiators

The asymmetric anionic polymerization of o-, m-, and p-methylphenyl isocyanates, p-methoxyphenyl isocyanate, p-chlorophenyl isocyanate, 2,6- and 3,4-dimethylphenyl isocyanates, and 1-naphthyl isocyanate was carried out using chiral anionic initiators such as the lithium salts of (?) -menthol, (?) -(2-methoxymethyl) pyrrolidine, and (+) -1-(2-pyrrolidinylmethyl) pyrrolidine. Although o-methylphenyl isocyanate gave an insoluble polymer and 2,6-dimethylphenyl isocyanate afforded no polymer, the other monomers gave soluble polymers, which showed optical activity due to the prevailing helicity of the polymer chain induced by chiral initiator residues attached to the α-end of the polymer chain. The molecular mechanics conformational calculation for a tetramer of m-methylphenyl isocyanate supported the helical conformation of the main chain. The optical rotation of the polymers depended significantly on temperature. © 1994 John Wiley & Sons, Inc.     

Oxoaminium salts as initiators for cationic polymerization of vinyl monomers

Oxoaminium salt ( 1 ), derived from 2,2,6,6-tetramethylpiperidine-1-oxyl (TEMPO, 2 ) by one-electron oxidation, could be an initiator for cationic polymerization of vinyl monomers such as isobutyl vinyl ether (IBVE), 2,3-dihydrofuran, p-methoxystyrene, N-vinyl pyrrolidone, etc., to give the corresponding polymers, when 1 had a low nucleophilic counter anion. Formation of the adducts of 1 and IBVE as well as ¹H-NMR and IR data suggested the formation of polymers containing N? O? C structure as the polymer head group. In the polymerization of IBVE, the effects of solvent and concentration of 1 were little observed, however the polymerization rate was dependent on temperature. Furthermore, the thermal reaction of the polymers obtained, which were regarded as prepolymers for block copolymerization and polymeric initiators for radical polymerization, was studied. For example, poly(2-benzylidene-1,3-dioxane) obtained by the polymerization of 2-benzylidene-1,3-dioxane with oxoaminium hexafluoroantimonate ( 1, X = SbF₆) was employed as an initiator for radical polymerization of MMA to give its block copolymer with PMMA. © 1993 John Wiley & Sons, Inc.     

Polymerization of vinyl monomers in the presence of silica having surface functional groups

The surface of silica was modified by mercaptopropyl, chloropropyl, aminopropyl, and methacryloxypropyl groups by the treatment of silica with the corresponding silane coupling agents, and the effects of functional groups on the surface on the polymerization of vinyl monomers initiated by benzoyl peroxide or 2,2-azobisisobutyronitrile were investigated. Although the rate of the polymerization of vinyl monomers in the presence of silica was almost equal to that in the absence of silica, a part of polymer formed was grafted onto silica surface. The polymerization was considerably retarded in the presence of these functionalized silicas and the corresponding polymers were effectively grafted onto the surface. The molecular weight of ungrafted polymer formed in the presence of the functionalized silica was lower than that formed in the presence of unmodified silica. This indicates that the chain transfer reaction of growing polymer radical to functionalized silica surface forms radicals on the surface, which then couples with growing polymer radical and/or reinitiates the polymerization to give rise to the grafting of polymers onto the surface. In the case of silica having methacryloxypropyl groups, the grafting based on the copolymerization of vinyl monomer with the surface methacryloxypropyl groups was considered to successfully proceed.     

高支化聚合物的合成与表征

介绍了近年来在高分子化学领域内十分活跃的高支化聚合物研究的状况。指出了通过ＡＢｘ型单体的缩聚反应和Ａ＝Ｂ－Ｃ＾８型单体的自缩合乙烯都可获得高支化聚合物。目前用以表征高支化聚合物支化度和分子量的方法主要为核心共振法和凝胶渗透色谱法,在实际应用中都存在局限性。     

Polymers and Copolymers of Vinyl Monomers with Blocked Isocyanate Groups: Synthesis and Characterization

Abstract

The polymerization of vinyl monomers containing blocked isocya-nate groups is reported. The blocking agents for the isocyanate groups of 2-isocyanato methacrylate were phenol, propanone oxime, benzophe-none oxime, and ecaprolactam. The ¹H-NMR and IR spectra of these polymers are discussed. Copolymerization reactivity ratios of the vinyl monomer blocked by phenol with styrene and methyl methacrylate have been determined. Glass transition temperatures of these polymers have been determined by differential scanning calorimetry. The homo– and copolymers were crosslinked in the presence of ethylene diamine, and the gels obtained were examined by IR spectra.     

Highly versatile organostibine mediators for living radical polymerization

A new versatile method for conducting living radical polymerization has been developed in which organostibines induce consecutive group-transfer radical reactions with alkenes. The method has been successfully applied, for the first time, to the controlled polymerization of both conjugated and unconjugated vinyl monomers, and the desired polymers with predetermined molecular weight and low polydispersity index were obtained in excellent yields. This characteristic feature of this method is exemplified in the first synthesis of block copolymers composed of conjugated and unconjugated monomers, which would be of great importance as functional smart organic nanomaterials.     

超临界CO2在高分子合成与制备中的应用

介绍超临界二氧化碳流体作为介质在高分子合成与制备中的研究进展。文中表明，可在超临界二氧化碳中实施氟代单体的自由基溶液聚合、甲基丙烯酸甲酯的分散聚合、丙烯酸的沉淀聚合、丙烯酰胺的反相乳液聚合以及异丁基乙烯基醚的阳离子聚合等多种聚合反应，可用超临界二氧化碳溶胀聚合法制备梯度共混物。此外，超临界二氧化碳还可用于聚合物分级和聚合物微孔、微纤与微球材料的制备等，显示出超临界二氧化碳是一种对环境无污染且价廉的     

Cationic Grafting of Vinyl Polymers onto a Carbon Whisker,Initiated by Acylium Perchlorate Groups Introduced onto the Surface

Abstract

The cationic graft polymerization of vinyl monomers onto a carbon whisker, vapor-grown carbon fiber, initiated by acylium perchlorate groups introduced onto the surface, was investigated. The introduction of acylium perchlorate groups onto a carbon whisker was achieved by the treatment of a carbon whisker having acyl chloride groups, which were introduced by the reaction of surface carboxyl groups with thionyl chloride, with silver perchlorate in nitrobenzene. It was found that the cationic polymerization of vinyl monomers, such as styrene, indene, N-vinyl-2-pyrrolidone, and n-butyl vinyl ether, is initiated by acylium perchlorate groups on a carbon whisker. In the polymerization, the corresponding vinyl polymers were grafted onto a carbon-whisker surface based on the propagation of polymer from the surface: the percentage of grafting of polystyrene and polyindene reached 42.5 and 100.3%, respectively. The percentage of polystyrene grafting decreased with increasing polymerization temperature because of preferential chain transfer reactions at higher temperatures. Polymer-grafted carbon whisker gave a stable colloidal dispersion in a good solvent for grafted polymer.     

Polymerization of water soluble cationic vinyl monomers

This paper summarizes investigations on the radical polymerization of cationic vinyl monomers with respect to the peculiarities of the reaction in aqueous solution, the synthesis of model polymers and polyelectrolytes with regular structure as well as to a new process of stabilized precipitation polymerization. The rate of polymerization depends on the ionic strength of the solution. Random copolymers of diallyldimethylammonium chloride and acrylamide with variable charge density but equal molecular weight were synthesized by a feeding technique. Block copolymers consisting of charged and uncharged monomelic units with different hydrophilicity are available using macroazoinitiators. The novel polymers are powerful stabilizers in the precipitation polymerization of water soluble cationic vinyl monomers in aqueous salt solution leading to a dispersion of fine polymer particles. Polyampholytes with alternating positively and negatively charged monomelic units in the backbone were obtained by cyclocopolymerization of diallylanmine compounds and derivatives of maleic acid.     

A versatile method for cyclic polymers from conjugated and unconjugated vinyl monomers

A versatile method was introduced to prepare cyclic polymers from both conjugated and unconjugated vinyl monomers. It was developed on the combination of the RAFT polymerization and the self‐accelerating double strain‐promoted azide‐alkyne click (DSPAAC) reaction. In this approach, a switchable chain transfer agent 1 was designed to have hydroxyl terminals and a functional pyridinyl group. The protonation and deprotonation of pyridinyl group endowed the chain transfer agent 1 with a switchable control capability to RAFT polymerization of both conjugated and unconjugated vinyl monomers. Based on this, RAFT polymerization and the following hydroxyl end group modification were used to prepare various azide‐terminated linear polymers including polystyrene, poly(N‐vinylcarbazole), and polystyrene‐block‐poly(N‐vinylcarbazole). Using sym‐dibenzo‐1,5‐cyclooctadiene‐3,7‐diyne (DBA) as small linkers, the corresponding cyclic polymers were then prepared via the DSPAAC reaction between DBA and azide terminals of the linear precursors. Due to the self‐accelerating property of DSPAAC reaction, this bimolecular ring‐closing reaction could efficiently produce the pure cyclic polymers using excess molar amounts of DBA to linear polymer precursors. © 2019 Wiley Periodicals, Inc. J. Polym. Sci., Part A: Polym. Chem. 2019 , 57, 1811–1820     

Controlled polymerization in mesoporous silica toward the design of organic-inorganic composite nanoporous materials

Free-radical polymerization inside mesoporous silica has been investigated in order to open a route to functional polymer-silica composite materials with well-defined mesoporosity. Various vinyl monomers, such as styrene, chloromethyl styrene, 2-hydroxyethyl methacrylate, and methacrylic acid, were polymerized after impregnation into mesoporous silicas with various structures, which were synthesized using polyalkylene oxide-type block copolymers. The location of the polymers was systematically controlled with detailed structures of the silica framework and the polymerization conditions. Particularly noteworthy is the polymer-silica composite structure obtained by in situ polymerization after the selective adsorption of monomers as a uniform film on silica walls. The analysis of XRD data and the N(2) adsorption isotherms indicates the formation of uniform polymer nanocoating. The resultant polymer-silica composite materials can easily be post-functionalized to incorporate diverse functional groups in high density, due to the open porous structure allowing facile access for the chemical reagent. The fundamental characteristics of the composite materials are substantiated by testing the biomolecule's adsorption capacity and catalytic reactivity. Depending on the structure and composition of polymers, the resultant polymer-silica composite materials exhibit notably distinct adsorption properties toward biomolecules, such as proteins. Furthermore, it is demonstrated that the nanocoatings of polymers deposited on the mesopore walls have remarkably enhanced catalytic activity and selectivity, as compared to that of bulk polymer resins. We believe that, due to facile functionalization and attractive textural properties, the mesoporous polymer-silica composite materials are very useful for applications, such as adsorption, separation, host-guest complexes, and catalysis.