Polymers from 1,3-dipole addition reactions: The nitrilimine dipole from acid hydrazide chlorides

An investigation of the suitability of the 1,3-dipole addition reaction of bisnitrilimines, generated from the corresponding acid hydrazide chlorides, with diyne and dinitrile dipolarophiles was carried out. The reactions of iso- and terephthaloylphenylhydrazide chlorides and 4,4′-oxydibenzoylphenylhydrazide chloride with the dipolarophiles m- and p-diethynylbenzene, m-divinylbenzene, and perfluoroglutaronitrile in the presence of triethylamine gave moderate molecular weight polymers containing pyrazole or triazole units along the polymer backbone. The polymers were soluble in such polar solvents as hexamethylphosphoramide and acids but had inherent viscosities only as high as 0.32. The thermogravimetric analyses of the finely powdered polypyrazoles showed breaks near 500°C. in air and in nitrogen atmospheres.     

Polymers from 1,3-dipole addition reactions: The sydnone dipole

An investigation of the suitability of certain 1,3 dipole addition reactions as polymerization reactions was carried out. Reaction of p-phenylene-3,3′-disydnone and N,N′-hexamethylenedisydnone with the dipolarophiles m- and p-diethynylbenzene, m-divinylbenzene, and p-benzoquinone gave moderate molecular weight polymers containing pyrazole or pyrazoline units along the polymer backbone. The polymers are crystalline and have inherent viscosities of 0.4–0.6. The thermogravimetric analyses of the finely powdered polyprazoles showed breaks near 420°C. in air and 500°C. in nitrogen atmospheres.     

Phenylated polyimides: Diels-Alder reaction of biscyclopentadienones with dimaleimides

A series of phenylated polydihydrophthalimides has been synthesized by the Diels-Alder reactions of 3,3′-(oxydi-p-phenylene)bis(2,4,5-triphenylcyclopentadienone) and 3,3′-(p-phenylene)bis(2,4,5-triphenylcyclopentadienone) with N,N′-o-, -m-, and -p-phenylenedimaleimide. The polydihydrophthalimides were soluble in dimethylformamide (DMF) and had intrinsic viscosities that ranged from 0.33 to 1.01, the polymers were dehydrogenated thermally and chemically to afford the corresponding phenylated polyphthalimides. The totally aromatic polyimides were also soluble in DMF but had intrinsic viscosities only as high as 0.41. The thermogravimetric analyses of the polyphthalimides showed breaks near 530°C in air and in nitrogen atmospheres.     

Polyimides derived from bismethylolimides. I. Polyamide–imides from bismethylolimides and dinitriles

New polyamide–imides were synthesized from bismethylolimides and dinitriles. The bismethylolimides, N,N′-bismethylolpyromellitdiimide and N,N′-bismethylolbenzophenonete-tracarboxylic diimide, were prepared by the hydroxymethylation of the corresponding diimides with formaldehyde. The polymerization reaction was carried out in either concentrated sulfuric acid or poly(phosphoric acid), and the former was found to be superior to the latter. The polyamide–imides had inherent viscosities in the 0.08–0.41 dl/g range. Most of these polymers were soluble in m-cresol and dichloroacetic acid. The thermal stability of the polymers was examined by thermogravimetric analysis, and they were found to start to decompose at 275–350°C in air.     

Synthesis of benzylidene-pendant polyphthalimidines from flexible bisphthalides and various diamines

New polyphthalimidine-forming monomers, 5,5′-(oxydi-p-phenylenedicarbonyl)bis(3-benzylidenephthalide) and the 6,6′-derivative, were synthesized by the Friedel–Crafts reaction of diphenyl ether with 5- and 6-chloroformyl-3-benzylidenephthalide, respectively. The direct polycondensation of these bisphthalides with both aliphatic and aromatic diamines in o-phenylphenol at 200–250°C afforded polyphthalimidines having inherent viscosities of 0.2–1.2 dL/g in almost quantitative yields. Syntheses of aliphatic polyphthalimidines with higher inherent viscosities were also achieved by a two-step procedure involving ring-opening polyaddition and subsequent thermal cyclodehydration. All the polymers were amorphous and readily soluble in N-methyl-2-pyrrolidone (NMP), m-cresol, nitrobenzene, pyridine, and chloroform. Tough and flexible films could be cast from NMP solutions of the polymers. Glass transition temperatures of the polyphthalimidines were in the range of 158–246°C. The thermogravimetry of the aromatic polymers showed 10% weight loss in air and nitrogen at 445–515 and 500–520°C, respectively. The crosslinking reaction of some benzylidenependant polyphthalimidines took place at 300°C through double-bond addition to afford cured polymers with improved thermal stability.     

Polyimides derived from bis-N-hydroxyimides. II. Synthesis and properties of polyimide-esters

Polycondensation of bis-N-hydroxyimides, N,N′ dihydroxypyromellitic diimide, and N,N′ -dihydroxybenzophenonetetracarboxylic diimide with dicarboxylic acid chlorides was carried out in dimethylacetamide in the presence of triethylamine to produce novel polyimide-esters. The resulting polymers had inherent viscosities up to 0.27 dl/g. These polyimide-esters and model compounds exhibited high reactivity toward nucleophiles such as aniline and n-butylamine, which brought about rapid reductions in the viscosity of the polymers. These polymers were fairly resistant to organic solvents but soluble in m-cresol. Thermal stability oft he polyimide-esters was evaluated by thermogravimetry and their good heat-resistant properties were confirmed.     

Synthesis of aromatic polythioamide-oxothioxoquinazolines from bis(1,3,4-thiadiazoline-5-thione) and aromatic bis-o-amino esters

Aromatic polythioamide-oxothioxoquinazolines were synthesized by the polycondensation of 2,2′-(m-phenylene)bis-1,3,4-thiadiazoline-5-thione with aromatic bis-o-amino esters. The polymerizations were carried out at 160°C in acidic media such as m-cresol, sulfolane, and polyphosphoric acid to produce polymers with reduced viscosities up to 0.5 dL/g. These polymers were soluble in polar aprotic solvents like N-methyl-2-pyrrolidone and some acidic media including m-cresol. The polythioamide-oxothioxoquinazolines showed relatively good thermal stability with 10% weight loss at 344–394°C in air.     

Synthesis of hydroxyl-containing polyamides by ring-opening polyaddition of 4,4′-disubstituted bis(4-butanolide) with aliphatic diamines

Hydroxyl-containing polyamides have been prepared by the ring-opening polyaddition of 4,4′-oxydi-p-phenylenebis(4-butanolide) with aliphatic diamines in alcoholic solvents at 65–80°C. These polymers having inherent viscosities ranging from 0.1 to 0.5 were soluble in a variety of solvents including dimethylformamide, formic acid, and m-cresol. Transparent and flexible films cast from these solutions were highly hygroscopic. All the polymers had low softing temperatures in the range of 115–130°C, and began to decompose at around 250°C, both in air and under nitrogen.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-carboxyphenoxy) biphenyl or 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl and aromatic diamines

New aromatic dicarboxylic acids having kink and crank structures, 2,2′-bis(p-carboxyphenoxy) biphenyl and 2,2′-bis(p-carboxyphenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluorobenzonitrile with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by hydrolysis. Biphenyl-2,2′-diyl-and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.58–1.46 dL/g and 0.63–1.30 dL/g, respectively, were obtained by the low-temperature solution polycondensation of the corresponding diacid chlorides with aromatic diamines. These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 210–272 and 260–315°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 450°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of aromatic polyamides from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic dicarboxylic acids

New aromatic diamines having kink and crank structures, 2,2′-bis(p-aminophenoxy)biphenyl and 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl, were synthesized by the reaction of p-fluoronitrobenzene with biphenyl-2,2′-diol and 2,2′-dihydroxy-1,1′-binaphthyl, respectively, followed by catalytic reduction. Biphenyl-2,2′-diyl- and 1,1′-binaphthyl-2,2′-diyl-containing aromatic polyamides having inherent viscosities of 0.44–1.18 and 0.26–0.88 dL/g, respectively, were obtained either by the direct polycondensation or low-temperature solution polycondensation of the diamines with aromatic dicarboxylic acids (or diacid chlorides). These polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, m-cresol, and pyridine. Transparent, pale yellow, and flexible films of these polymers could be cast from the DMAc or NMP solutions. These aromatic polyamides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 215–255 and 266–303°C, respectively. They began to lose weight at ca. 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

A new single-step process for polybenzimidazole synthesis

Aromatic benzimidazole polymers have been prepared by reaction of the corresponding tetraamine and diester in refluxing sulfolane or phenyl sulfone. The convenience of using these sulfone solvents together with the good yields, high viscosities and absence of crosslinking make this procedure an attractive new route to this class of polymers. The preparation by this procedure of poly[2,2′-(m-phenylene)-5,5′-bibenzimidazole], poly-[2,2′-(p-phenylene)-5,5′-bibenzimidazole], poly[2,2′-(m-phenylene)-5,5′-di(benzimidazole) ether], and poly[2,2′-(m-phenylene)-5,5′-di(benzimidazole) ketone] is described.     

Preparation and properties of aromatic polymides from 2,2′-bibenzoic acid and aromatic diamines

Aromatic polyamides having inherent viscosities up to 1.8 dL/g were synthesized either by the direct polycondensation of 2,2′-bibenzoic acid with various aromatic diamines or by the low temperature solution polycondensation of 2,2′-bibenzoyl chloride with aromatic diamines. All the aromatic polyamides were amorphous and soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone, dimethyl sulfoxide, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the DMAc solutions. These aromatic polymides had glass transition temperatures in the range of 226-306deg;C and began to lose weight around 350°C in air.     

Synthesis of inherently dissymmetric polyamides,

The preparation of polyamides from derivatives of optically active biphenic acid is described. The diacid chlorides chosen were 2,2′-dinitro-6,6′-dimethylbiphenyl-4,4′-dicarbonyl chloride and 2,2′-dichloro-6,6′-dimethylbiphenyl-4,4′-dicarbonyl chloride, the diamines were phenyldiamines (o-, m-, p-) piperazine, trans-2,5-dimethylpiperazine, and 1,2-piperaazolidine. Polymerization was carried out by the method of interfacial polycondensation. The polymers of aromatic diamines were insoluble in common organic solvents but soluble in dimethylformamide containing 5% lithium chloride, triesters of phosphoric acid, and methanesulfonic acid. The polymers of aliphatic diamines were also insoluble in common organic solvents but soluble in trifluoroethanol. All polymers had melting points higher than 280°C.     

Polytetrazoles and polyaminotetrazoles

Polyaminotetrazoles were obtained by the action of hydrazoic acid on solutions of polycarbodimides prepared from methylenebis(4-phenyl isocyanate), toluene 2,4-diisocyanate, 3,3′-dimethoxy-4,4′-biphenylene diisocyanate, mesitylene diisocyanate, and hexamethylene diisocyanate. The polyaminotetrazoles, which were soluble only in concentrated sulfuric acid, had inherent viscosities of 0.12–0.78. Polymerization of the disodium salts of bistetrazoles with α,ω-dihalides gave polytetrazoles without the secondary amine linkage in the chain. The bistetrazoles, used were methylenebis(5-tetrazole) and 5,5′-p-phenylenebistetrazole, and the dihalides were α,α′-dichloro-p-xylene, 1,2-dibromoethane, and 1,4-dibromobutane. The polytetrazoles were soluble in concentrated sulfuric acid and had low inherent viscosities, 0.08–0.17. Thermogravimetric analyses showed that marked degradation of both classes of polymers occured at 250–300°C.     

Thermally stable polymers from 1,4,5,8-naphthalenetetracarboxylic acid and aromatic tetraamines

Polycondensations of 1,4,5,8-naphthalenetetracarboxylic acid (NTCA) with both 3,3′-diaminobenzidine (DAB) and 1,2,4,5-tetraaminobenzene tetrahydrochloride (TAB) in polyphosphoric acid (PPA) were found to produce soluble polymers which exhibit excellent thermal stabilities. Polymer structures were deduced from infrared, thermal, and elemental analyses of model compounds and polymers. Polymer derived from TAB had a ladder-type structure. Polymers with solution viscosities near 1 or above (determined in H₂SO₄) were obtained from polymerizations near 200°C., and analysis showed these to possess a very high degree of completely cyclized benzimidazobenzophenanthroline structure. Less vigorous reaction conditions gave polymers with lower solution viscosities which appeared to be less highly cyclized. Low-viscosity polymer was also prepared from DAB and NTCA by solid-phase polycondensation. Some advancements in the solution viscosities of polymers synthesized from DAB in PPA were caused by second staging in the solid phase.     

Two reaction routes for the preparation of aromatic polyoxadiazoles and polytriazoles: Syntheses and properties

Two reaction routes for the preparation of aromatic poly-1,3,4-oxadiazoles and poly-1,2,4-triazoles are studied and their influence on the physical properties, i.e., inherent viscosity, glass transition, degradation temperature, and film integrity of the final products are discussed. Aromatic poly-1,3,4-oxadiazoles are prepared by means of a polycondensation reaction of terephthaloyl chloride and isophthalic dihydrazide yielding a precursor polymer, poly(p, m-phenylene) hydrazide, which is converted into the corresponding poly-1,3,4-oxadiazole by means of a cyclodehydration reaction. Poly-1,3,4-oxadiazoles are also prepared by means of a polycondensation reaction between terephthalic and isophthalic acid and hydrazine yielding poly-1,3,4-oxadiazoles with higher inherent viscosities. Flexible poly-1,3,4-oxadiazole films are obtained only if the inherent viscosities of the polymers used are higher than 2.7 dL/g. The thermal stability is found to increase with increasing content of p-phenylene groups in the polymer backbone. Aromatic poly-1,2,4-triazoles are prepared using polyhydrazides with alternating para- and meta-phenylene groups and poly-1,3,4-oxadiazoles with a random incorporation of para- and meta-phenylene groups in the main chain as precursor polymers. The glass transition temperatures are found to increase with increasing content of p-phenylene groups in the main chain of these polymers. Cold crystallization is observed only for the alternating polymer. © 1994 John Wiley & Sons, Inc.     

Synthesis of polypyridazinophthalazinediones from dibenzoylphthalic acids and aromatic dihydrazines

A novel class of polypyridazinophthalazinediones has been synthesized by the solution cyclopolycondensation in m-cresol of dibenzoylphthalic acids with aromatic dihydrazines such as bis(4-hydrazinophenyl)methane and bis(4-hydrazinophenyl) sulfone. The polyheterocycles derived from 4,6-dibenzoylisophthalic acid, which had inherent viscosities of up to 0.5, were soluble in m-cresol and hot dichloroacetic acid, whereas the polymers from 2,5-dibenzoylterephthalic acid were practically insoluble in organic solvents. Thermogravimetric analyses showed that all the polymers underwent weight losses of 10% at 490–520°C in both air and nitrogen.     

Synthesis of polyamides by ring-opening polyaddition of 4,4′-disubstituted bis(3-buten-4-olide) with aliphatic diamines

An investigation of the reaction of 4-phenyl-3-buten-4-olide with benzylamine was conducted as a model for the polymerization, and some ethers and acidic solvents were found to be favorable reaction media for formation of the ring-opened amide as the sole product. By using m-cresol as the polymerization medium, linear polyamides having inherent viscosities up to 0.67 were readily prepared by the ring-opening polyaddition of 4,4′-oxydi-p-phenylenebis(3-buten-4-olide) with aliphatic diamines at room temperature. These polymers were soluble in m-cresol and gave transparent, flexible films by the solution casting technique. They did not show any melt temperature, and began to decompose at around 200°C, both in air and under nitrogen.     

Preparation and properties of aromatic polyimides from 2,2′-bis(p-aminophenoxy)biphenyl or 2,2′-bis)p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides

New aromatic polyimides containing a biphenyl-2,2′-diyl or 1,1′-binaphthyl-2,2′-diyl unit were prepared by a conventional two-step method starting from 2,2′-bis(p-aminophenoxy) biphenyl or 2,2′-bis(p-aminophenoxy)-1,1′-binaphthyl and aromatic tetracarboxylic dianhydrides. The polyimides having inherent viscosities of 0.69–0.99 and 0.51–0.59 dL/g, respectively, were obtained. Some of these polymers were readily soluble in a variety of organic solvents including N,N-dimethylacetamide (DMAc), N-methyl-2-pyrrolidone (NMP), dimethyl sulfoxide, and pyridine. Transparent, flexible, and pale yellow to brown films of these polymers could be cast from the DMAc or NMP polyamic acid solutions. These aromatic polyimides containing biphenyl and binaphthyl units had glass transition temperatures in the range of 200–235 and 286–358°C, respectively. They began to lose weight around 380°C, with 10% weight loss being recorded at about 470°C in air. © 1993 John Wiley & Sons, Inc.     

Preparation and properties of polyarylates both from 2,2′-bibenzoyl chloride and bisphenols and from biphenyl-2,2′-diol and aromatic dicarboxylic acid chlorides

Polyarylates having inherent viscosities up to 1.02 dL/g were synthesized both by the phase-transfer catalyzed two-phase polycondensation of 2,2′-bibenzoyl chloride with various bisphenols and by the high-temperature solution polycondensation of biphenyl-2,2′-diol with aromatic dicarboxylic acid chlorides. All the polyarylates were amorphous and soluble in a variety of organic solvents including N,N-dimethylformamide, N-methyl–2-pyrrolidone, chloroform, m-cresol, and pyridine. Transparent and flexible films of these polymers could be cast from the chloroform solutions. These polyarylates had glass transition temperatures in the range of 120–250°C and began to lose weight at around 380°C in air. © 1992 John Wiley & Sons, Inc.