Synthesis and polymerization of the four 1,3-di(cyano and/or carbomethoxy)-substituted butadienes

The four 1,3-di(cyano and/or carbomethoxy)-substituted butadienes were synthesized. Their cyclopentadiene adduct precursors and, in one case, an anthracene adduct precursor were synthesized and pyrolyzed at 400–600°C (0.1–1.0 mm) to yield the four new dienes. Two crystalline precursors gave crystalline dienes 1,3-dicyano-1,3-butadiene, mp 79°C, and 1-carbomethoxy-3-cyanobutadiene, mp 45–46°C, in modest yields in small-scale experiments, which were completely characterized by elemental analyses and spectra. The other two liquid precursors produced no isolable or detectable dienes but led directly to polymer. The two crystalline dienes were exceptionally reactive, polymerizing on storage or when deliberately initiated with AIBN, but were moderately stable in solution. All polymers possessed the trans-1,4-structure exclusively. Because of the favorable location of the electronegative substituents for stabilizing the growing radical, these new dienes are the most reactive di-electronegatively substituted butadienes described.     

119Sn-NMR evidence for 2,1-initiation in the anionic polymerization of butadiene with trialkyltin lithium

Low molecular weight polybutadienes and styrene butadiene copolymers were anionically prepared with trialkyltin lithium initiator and end-capped with either hydrogen or a trialkyltin group. These polymers were prepared with a variety of microstructures. Analysis by ¹¹⁹Sn-NMR and comparison to model compounds showed no cis-1,4-initiation of the butadiene. The initiation sites found were trans-1,4- and both 2,1- and 1,2-additions of the tin-lithium bound to a 1,3-butadiene. At low levels of added polar modifier, the 2,1-addition predominated. The ¹¹⁹Sn-NMR spectra allowed the assignment of the sequence distribution associated with the nearest eight main chain carbon atoms (2-4 monomer units) adjacent to the tin end groups. No initiation could be detected involving the styrene comonomer, but incorporation of styrene was detected as the first or second unit after initiation. The reaction of the allyl-tin end groups of these polymers with 1,2-napthoquinone was followed by NMR and was used to assign the peaks associated with 1,2-addition of the trialkyltin lithium to 1,3-butadiene. © 1995 John Wiley & Sons, Inc.     

Semiconducting Polymers Based on Simple Electron-Deficient Cyanated trans-1,3-Butadienes for Organic Field-Effect Transistors

Developing high-performance but low-cost n-type polymers remains a significant challenge in the commercialization of organic field-effect transistors (OFETs). To achieve this objective, it is essential to design the key electron-deficient units with simple structures and facile preparation processes, which can facilitate the production of low-cost n-type polymers. Herein, by sequentially introducing fluorine and cyano functionalities onto trans-1,3-butadiene, we developed a series of structurally simple but highly electron-deficient building blocks, namely 1,4-dicyano-butadiene ( CNDE ), 3-fluoro-1,4-dicyano-butadiene ( CNFDE ), and 2,3-difluoro-1,4-dicyano-butadiene ( CNDFDE ), featuring a highly coplanar backbone and deep-positioned lowest unoccupied molecular orbital (LUMO) energy levels (−3.03–4.33 eV), which render them highly attractive for developing n-type semiconducting polymers. Notably, all these electron-deficient units can be easily accessed by a two-step high-yield synthetic procedure from low-cost raw materials, thus rendering them highly promising candidates for commercial applications. Upon polymerization with diketopyrrolopyrrole ( DPP ), three copolymers were developed that demonstrated unipolar n-type transport characteristics in OFETs with the highest electron mobility of >1 cm² V⁻¹ s⁻¹. Hence, CNDE , CNFDE , and CNDFDE represent a class of novel, simple, and efficient electron-deficient units for constructing low-cost n-type polymers, thereby providing valuable insight for OFET applications.     

2-alkyl-1,3-butadiene polymerization under the influence of π-allylic complexes of transition metals

Stereoregulation in the polymerization of 2-alkyl-1,3-butadienes with transition metal π-allylic complexes has been studied. The direction of isoprene polymerization is shown to be a function of the nature of the metal and ligands in the allylic compound. The presence of acidic ligands in π-allylic complexes of Zr, Cr, Mo, and Co contributes to 1,4-addition and increases the selectivity of π-allylic nickel complexes, favoring cis-1,4-structure formation. Investigation of the model reaction of 2-alkyl-1,3-butadienes with bis(π-perdeuterocrotyl nickel iodide) revealed that active sites have an π-allylic type structure. The mechanism of formation of π-allylic adducts and the main factors which determine the dependence of direction and rate of polymerization on the nature of a monomer in the diene series: 2-methyl-1,3-butadiene(isoprene), 2-ethyl-1,3-butadiene, 2-isopropyl-1,3-butadiene, and 2-tert-butyl-1,3-butadiene, are discussed.     

Synthesis and polymerization of some optically active 2- and 1,2-substituted butadienes

Dehydration of (S)-3,5-dimethyl-1-hepten-3-ol gave: (3E)- (I) and (3Z)-(5S)-3,5-dimethyl-1,3-heptadienes (II) and 2-[(S)- 2-methylbutyl]-1,3-butadiene (III). 2-[(S)-1-Methylpropyl]-1,3-butadiene (IV) was also prepared similarly by dehydration of (S)-3,4-dimethyl-1-hexene-3-ol. Monomers I–IV we polymerized in the presence of the TiCl₄–Al(i-C₄H₉)₃ catalyst system and in emulsion with K₂S₂O₈ as initiator. Monomer IV was also polymerized in the presence of butyllithium. Specific rotations of polymers are of the same order of magnitude as that of monomers, with exception of polymers prepared by stereospecific polymerization of (S)-I and (S)-II. The acetone-soluble fraction of these polymers has a molar rotation similar to that of monomer, while the acetone-insoluble part has a lower rotation ([M]_D of monomer +53.2°; [M]_D of polymer, +5.9°).     

Preparation,copolymerization kinetics,and viscoelastic behavior of copolymers of 1,3-butadiene and 1,4-diphenyl-1,3-butadiene

1,4-Diphenyl-1,3-butadiene reacts readily with sec-butyllithium in toluene to form adducts. Although this 1,4-substituted conjugated diene did not homopolymerize or copolymerize with styrene, with butadiene it formed copolymers having compositions varying from one end of the chain to the other. The monomer reactivity ratios found were r₁ = 8.2, r₂ = 0 in toluene and r₁ = 2.1, r₂ = 0 in toluene–tetrahydrofuran (0.2%) solution. The intramolecular composition distribution of these polymers varied from an initial butadiene-rich composition, dependent on the ratio of monomers charged, to the equimolar composition of the alternating copolymer. In spite of this compositional heterogeneity, the crosslinked polymers exhibited a single glass transition characteristic of the mean composition. A secondary, high-temperature dispersion observed in the dynamic viscoelastic properties of some of the products is shown to be attributable to network topological effects.     

Carbocyclization of E,E-1,4-Diphenyl-1,3-butadiene with Dichloroalkanes Mediated by Rieke Metals

The Rieke metal complexes of barium and strontium readily react with E,E-1,4-diphenyl-1,3-butadiene to form metal-diene reagents. Upon treatment with l .n-dichloroalkanes, these metallocycles are transformed into ring derivatives in excellent chemical yield.     

Polyaromatic ether-ketone-sulfones containing 1,3-butadiene units

The acid chloride of 1,4-bis-p-carboxyphenyl-1,3-butadiene (XI) and isophthaloyl chloride (XIV) were polymerized with 4,4′-diphenoxy-diphenyl sulfone (XII) and diphenyl ether (XIII) in a Friedel-Crafts type of polymerization. The polymers obtained, which contained 5–20 mole % of butadiene units, were insoluble in all solvents. The polyamides prepared from the acid chloride of 1,4-bis-p-carboxyphenyl-1,3-butadiene (XI) and aromatic diamines were also insoluble in all solvents.     

Well-defined transition metal complexes with phosphorus and nitrogen ligands for 1,3-dienes polymerization

This article provides an overview on recent progress in the polymerization of 1,3-dienes catalyzed by transition metal complexes with phosphorus and nitrogen ligands. Polymers having different microstructures (cis-1,4; 1,2; mixed cis-1,4/1,2) and tacticity (iso- or syndiotactic) were obtained from various 1,3-dienes (1,3-butadiene, isoprene, 1,3-pentadienes, 1,3-hexadienes) depending on the catalyst used, clearly suggesting that the catalyst structure (i.e. metal nature, type of ligand) strongly affects the polymerization chemo- and stereoselectivity. However, as indicated by the results obtained in the polymerization of substituted butadienes, a fundamental role in determining the selectivity is also played by the type of monomer: polymers with different structure, some of them completely new, were obtained from different monomers with the same catalyst. All these observations permitted to confirm, and in some cases to improve, the knowledge on the diene polymerization mechanism.     

Aminobutadienes. V. Polymers of 1-phthalimido-1,3-butadiene and 1-succinimido-1,3-butadiene

The radical polymerizations of 1-phthalimido-1,3-butadiene (1-PB) and 1-succinimido-1,3-butadiene (1-SB) were carried out in bulk and in solution. The polymers obtained had reduced viscosities in the ranges of 1.0–4.0 (1-PB) and 0.2–0.6 (1-SB). Both polymers had a similar softening point of 190–200°C. The radical polymerization of 1-phthalimido-1,3-butadiene clearly showed a tendency to give crosslinked polymer. Steric arguments about these polymer structures as a result of the infrared and ozonolysis data led to the conclusion that these polymers contained approximately 20% of the 3,4 form but no 1,2 configuration, and, therefore, that the 1,4 addition was preferred.     

Cationic polymerization of dimethyl-1,3-butadienes

The cationic polymerizations of dimethyl-1,3-butadienes with various catalysts in methylene chloride and toluene have been investigated. The activity of catalysts decreased in the order WCl₆ > AcClO₄ > SnCl₄·TCA > BF₃OEt₂. The homopolymerization rate of dimethyl-1,3-butadienes with WCl₆, AcClO₄, and SnCl₄·TCA decreased in the order 1,3-dimethyl-1,3-butadiene > 2,3-dimethyl-1,3-butadiene > 1,2-dimethyl-1,3-butadiene > 2,4-hexadiene. The polymers prepared with WCl₆, SnCl₄.TCA, and BF₃OEt₂ were rubberlike polymers or white powders, whereas those prepared with AcClO₄ were oily oligomers. The 1,4-propagation increased in the order 1,2-dimethyl-1,3-butadiene < 1,3-dimethyl-1,3-butadiene < 2,3-dimethyl-1,3-butadiene < 2,4-hexadiene. This order may indicate that the steric effect of methyl group determine primarily the microstructure of the polymer. The relative reactivity of dimethyl-1,3-butadienes toward a styryl cation decreased in the order 1,3-dimethyl-1,3-butadiene > 1,2-dimethyl-1,3-butadiene > 2,3-dimethyl-1,3-butadiene > 2,4-hexadiene. This order may be explained in terms of the stability of the resulting allylic cation.     

Polymerization and copolymerization of 2-phthalimidomethyll 1,3-butadiene. II. Kinetic study of the polymerization of 1,3-butadiene and of the copolymerization of 1,3-butadiene with 2-phthalimidomethyl 1,3-butadiene initiated by bis-(η3-allyl nickel trifluoroacetate)

The kinetics of the polymerization of 1,3-butadiene initiated by bis(η³-allyl nickel trifluoroacetate) prepared in benzene was studied in methylene chloride at 40°C. The reaction is first order with respect to the monomer, second order with respect to the catalyst in contrast to the case in which solvent is benzene. We have shown that the presence of a polar molecule (fe, N-methyl phthalimide) decreases the overall rate of polymerization. The apparent reactivity ratios for the system 2-phthalimidomethyl 1,3-butadiene (1)-1,3-butadiene (2) are r₁ = 0.65 ± 0.006 and r₂ = 0.48 ± 0.015.     

Synthesis of conjugated (1E,3E)- and (1Z,3Z)-1,4-di(n-pyridyl) (or n-quinolyl)-1,3-butadienes from n-(2′-chloroethenyl)pyridine (or quinoline)

The homocoupling reaction between the conjugated n-(2-chloroethenyl)pyridine; n, 2-, 3- and 4- (or quinoline; n, 2- and 4-) mediated by zero-valent nickel complexes at room temperature affords to the corresponding 1,4-diaryl-1,3-butadiene, always as the 1E,3E stereoisomer. The yield in 1,4-diaryl-1,3-butadiene increases with the nickel catalyst and hence, the active zero-valent nickel catalyst is not regenerated during the homocoupling reaction.The stereospecific synthesis of (1Z,3Z)-1,4-di(4′-pyridyl)-1,3-butadiene stereoisomer was efficiently carried out by partial hydrogenation of the appropriate 1,4-di(4′-pyridyl)-1,3-butadiyne.     

Highly efficient synthesis of stereodefined multisubstituted 1,4-dicyano- and 1-cyano-1,3-butadienes and their reactions with organolithium reagents

Stereodefined multisubstituted 1-cyano- and 1,4-dicyano-1,3-butadiene derivatives were obtained in excellent yields of the isolated product from their corresponding monohalo- and dihalobutadienes and CuCN. This reaction proceeded with high stereoselectivity and retention of the stereochemistry of the starting halobutadienes. A study of the utility of the thus-obtained 1-cyano- and 1,4-dicyano-1,3-butadiene derivatives was demonstrated by their reactions with organolithium reagents. 2H-Pyrrole or iminocyclopentadiene derivatives were formed in high yields from 1-cyano-4-halo-1,3-butadienes and organolithium reagents. When 1,4-dicyano-1,3-butadienes were treated with organolithium reagents followed by trapping with electrophiles, a tandem process took place to afford 2H-pyrrolyl nitriles in excellent yields. Reduction of 1,4-dicyano-1,3-butadiene derivatives with LiAlH4 showed novel reaction patterns relative to normal nitriles.     

«3-Fluorisopren» (2-Fluor-3-methyl-1,3-butadien) und einige heterosubstituierte Abkömmlinge

‘3-Fluoroisoprene’ (2-Fluoro-3-methyl-1,3-butadiene) and Some Hetero-substituted Derivatives Thereof The readily accessible 1-chloro-1-fluoro-2-iodomethyl-2-methylcyclopropane undergoes zinc-promoted ring-cleavage yielding 2-fluoro-3-methyl-1, 3-butadiene (‘3-fluoroisoprene’) in almost quantitative yield. Alternatively the iodine atom may be replaced by electron-attracting groups such as cyano, benzenesulfonyl or triphenylphosphonio. Ring-opening of the resulting derivatives can then be brought about by various bases and leads to substituted fluorodienes. - The chemical reactivity of ‘3-fluoroisoprene’ has been studied in some detail. For example, it was found to add bromine at temperatures below 0° under kinetic control and to afford mainly the 1,4-adduct having the (Z)-configuration besides smaller quantities of the 1,2- and 3,4-adduct. At room temperature this mixture slowly undergoes a transformation yielding, as the sole products, both stereoisomeric 1, 4-adducts in a 1:1 ratio.     

rac-[CH2(3-tert-butyl-1-indenyl)2]ZrCl2/MAO in the Copolymerization of Olefins and Dienes

Olefin-diene copolymerizations in the presence of C₂ symmetric zirconocene rac-[CH₂(3-tert-butyl-1-indenyl)₂]ZrCl₂/MAO catalytic system have been reported and rationalized by experimental and molecular modeling studies. Ethene gives 1,2-cyclopropane and 1,2-cyclopentane, 1,3-cyclobutane, and 1,3-cyclopentane units in copolymerization with 1,3-butadiene, 1,4-pentadiene, and 1,5-hexadiene, respectively. Propene-1,3-butadiene copolymerizations lead to 1,2 and 1,4 butadiene units and to a low amount of 1,2-cyclopropane units.     

New processable polyaromatic ether–keto-sulfones curable by Diels-Alder cycloaddition

New Processable polyaromatic ether-keto-sulfones were prepared from the acid chloride of bis-m-carboxyphenyl acetylene (XII), isophthaloyl chloride (XX), diphenyl ether (XVIII), and 4,4′-diphenoxydiphenyl sulfone (XIX) in a Friedel-Crafts-type polymerization. These polymers were cured by Diels-Alder cycloaddition with 1,4-diphenyl-1,3-butadiene. The cured polymers showed an increase in T_g and in thermal and heat stabilities. The polymers form colorless, transparent, brittle films and can be cast into a glass fiber laminate. Both meta-and para-substituted acid chlorides of biscarboxyphenyl-1,3-butadiene yielded insoluble polymers under the same conditions but form processable polymers where combined with acetylene units in the polymer chain. Polymers that contained both acetylene and butadiene units were prepared but could not be cured by an intramolecular Diels-Alder cycloaddition reaction.     

Aromatic polyethers,polysulfones, and polyketones as laminating resins. VI. Polymers from 2,5-dicyanoterephthalic acid

Aromatic poly(keto ether sulfones) containing various amounts of pendant cyano groups were synthesized from 1,4-bis(p-phenoxybenzoyl)-2,5-dicyanobenzene, 1,3-bis(p-phenoxybenzenesulfonyl)benzene, and isophthaloyl chloride by a Friedel-Crafts type polymerization. These polymers softened at 160–190°C and had inherent viscosities of 0.44–0.61 in hexamethylphosphoric triamide. Crosslinkings were made by heating the polymers alone or in the presence of zinc chloride at 360–370°C to give black resinous materials that were insoluble in hexamethylphosphoric triamide in which the original polymers dissolved quite readily.     

Aminobutadienes. X. Polymerization and copolymerization of 2-phthalimidomethyl-1,3-butadiene

The polymerization and copolymerization of 2-phthalimidomethyl-1,3-butadiene were investigated. This monomer was easily polymerized by benzoyl peroxide catalyst in bulk or in solvent, and by γ-radiation in the solid state to give polymers having a softening point of 135–145°C. Although these resulting polymers did not give x-ray diffraction patterns, they showed crystalline patterns by electron diffraction. On the other hand, cationic polymerization with the use of boron trifluoride diethyl etherate in chloroform was attempted, but no formation of the polymer was observed. Also, this monomer was easily copolymerized with styrene in N,N-dimethylformamide. The monomer reactivity ratios and Alfrey-Price Q and e values calculated from the copolymerization data of this monomer (M₁) with styrene (M₂) were r₁ = 2.0 ± 0.13, r₂ = 0.15 ± 0.02, and Q₁ = 2.78, e₁ = 0.30.     

Photooxidation of 1,3-butadiene containing systems: Rate constant determination for the reaction of acrolein with ⋅OH radicals

The photooxidation of the 1,3-butadiene–NO–air system at 298 ± 2 K was investigated in an environmental chamber under simulated atmospheric conditions. The irradiation gave rise to the formation of acrolein in a 55% yield, based on 1,3-butadiene initial concentration for all the experimental runs. The rate of formation of acrolein was the same as that of 1,3-butadiene consumption, indicating that acrolein is the major product of the 1,3-butadiene oxidation in air. The dependence of acrolein concentration on irradiation time showed thata secondary process, identified as an oxidation of acrolein by ^?OH radicals, was occurring during the photochemical runs. The rate constant of this secondary process was determined by measuring the relative rates of disappearance of acrolein and n-butane during the irradiation of acrolein-n-butane-NO-air mixtures. The so obtained relative rate constant value was placed on an absolute basis using a reported rate constant for the n-butane + ^?OH reaction; a value of (1.6 ± 0.2) × 10¹⁰ M^?1 sec^?1 was obtained.