Experimental and theoretical investigations of the sulfite-based polyoxometalate cluster redox series: alpha- and beta-[Mo(18)O(54)(SO(3))(2)](4-/5-/6-)

The synthesis, isolation and structural characterization of the sulfite polyoxomolybdate clusters alpha-(D(3h))(C(20)H(44)N)(4){alpha-[Mo(18)O(54)(SO(3))(2)]}CH(3)CN and beta-(D(3d))(C(20)H(44)N)(4){beta-[Mo(18)O(54)(SO(3))(2)]}CH(3)CN is presented. Voltammetric studies in acetonitrile (0.1 M Hx(4)NClO(4), Hx(4)N=tetra-n-hexylammonium) reveal the presence of an extensive series of six one-electron reduction processes for both isomers. Under conditions of bulk electrolysis, the initial [Mo(18)O(54)(SO(3))(2)](4-/5-) and [Mo(18)O(54)(SO(3))(2)](5-/6-) processes produce stable [Mo(18)O(54)(SO(3))(2)](5-) and [Mo(18)O(54)(SO(3))(2)](6-) species, respectively, and the same reduced species may be produced by photochemical reduction. Spectroelectrochemical data imply that retention of structural form results upon reduction, so that both alpha and beta isomers are available at each of the 4-, 5-, and 6-redox levels. However, the alpha isomer is the thermodynamically favored species in both the one- and two-electron-reduced states, with beta-->alpha isomerization being detected in both cases on long time scales (days). EPR spectra also imply that increasing localization of the unpaired electron occurs over the alpha- and beta-[Mo(18)O(54)(SO(3))(2)](5-) frameworks as the temperature approaches 2 K where the EPR spectra show orthorhombic symmetry with different g and hyperfine values for the alpha and beta isomers. Theoretical studies support the observation that it is easier to reduce the alpha cluster than the beta form and also provide insight into the driving force for beta-->alpha isomerization in the reduced state. Data are compared with that obtained for the well studied alpha-[Mo(18)O(54)(SO(4))(2))](4-) sulfate cluster.     

Dinitrogen Activation by Fryzuk’s [Nb(P2N2)] Complex and Comparison with the Laplaza–Cummins [Mo{N(R)Ar}3] and Schrock [Mo(N3N)] Systems

The reaction profile of N₂ with Fryzuk’s [Nb(P₂N₂)] (P₂N₂=PhP(CH₂SiMe₂NSiMe₂CH₂)₂PPh) complex is explored by density functional calculations on the model [Nb(PH₃)₂(NH₂)₂] system. The effects of ligand constraints, coordination number, metal and ligand donor atom on the reaction energetics are examined and compared to the analogous reactions of N₂ with the three‐coordinate Laplaza‐Cummins [Mo{N(R)Ar}₃] and four‐coordinate Schrock [Mo(N₃N)] (N₃N=[(RNCH₂CH₂)₃N]^3?) systems. When the model system is constrained to reflect the geometry of the P₂N₂ macrocycle, the N? N bond cleavage step, via a N₂‐bridged dimer intermediate, is calculated to be endothermic by 345 kJ mol^?1. In comparison, formation of the single‐N‐bridged species is calculated to be exothermic by 119 kJ mol^?1, and consequently is the thermodynamically favoured product, in agreement with experiment. The orientation of the amide and phosphine ligands has a significant effect on the overall reaction enthalpy and also the N? N bond cleavage step. When the ligand constraints are relaxed, the overall reaction enthalpy increases by 240 kJ mol^?1, but the N₂ cleavage step remains endothermic by 35 kJ mol^?1. Changing the phosphine ligands to amine donors has a dramatic effect, increasing the overall reaction exothermicity by 190 kJ mol^?1 and that of the N? N bond cleavage step by 85 kJ mol^?1, making it a favourable process. Replacing Nb^II with Mo^III has the opposite effect, resulting in a reduction in the overall reaction exothermicity by over 160 kJ mol^?1. The reaction profile for the model [Nb(P₂N₂)] system is compared to those calculated for the model Laplaza and Cummins [Mo{N(R)Ar}₃] and Schrock [Mo(N₃N)] systems. For both [Mo(N₃N)] and [Nb(P₂N₂)], the intermediate dimer is calculated to lie lower in energy than the products, although the final N? N cleavage step is much less endothermic for [Mo(N₃N)]. In contrast, every step of the reaction is favourable and the overall exothermicity is greatest for [Mo{N(R)Ar}₃], and therefore this system is predicted to be most suitable for dinitrogen cleavage.     

Effects of chain length and Au spin-orbit coupling on 3(pi pi*) emission from bridging Cn2- units: theoretical characterization of spin-forbidden radiative transitions in metal-capped one-dimensional carbon chains [H3PAu(C[triple bond]C)nAuPH3

Density functional theory and CASSCF calculations have been used to optimize the geometries of binuclear gold(I) complexes [H(3)PAu(C[triple bond]C)(n)AuPH(3)] (n=1-6) in their ground states and selected lowest energy (3)(pi pi*) excited states. Vertical excitation energies obtained by time-dependent density functional calculations for the spin-forbidden singlet-triplet transitions have exponential-decay size dependence. The predicted singlet-triplet splitting limit of [H(3)PAu(C[triple bond]C)(proportional/variant)AuPH(3)] is about 8317 cm(-1). Calculated singlet-triplet transition energies are in reasonable agreement with available experimental observations. The effect of the heavy atom Au spin-orbit coupling on the (3)(pi pi*) emission of these metal-capped one-dimensional carbon allotropes has been investigated by MRCI calculations. The contribution of the spin- and dipole-allowed singlet excited state to the spin-orbit-coupling wave function of the (3)(pi pi*) excited state makes the low-lying acetylenic triplet excited states become sufficiently allowed so as to appear in both electronic absorption and emission.     

Triple Bonds Between Iron and Heavier Group 15 Elements in AFe(CO)3− (A=As,Sb, Bi) Complexes

Heteronuclear transition‐metal–main‐group‐element carbonyl complexes of AsFe(CO)₃^?, SbFe(CO)₃^?, and BiFe(CO)₃^? were produced by a laser vaporization supersonic ion source in the gas phase, and were studied by mass‐selected IR photodissociation spectroscopy and advanced quantum chemistry methods. These complexes have C_3v structures with all of the carbonyl ligands bonded on the iron center, and feature covalent triple bonds between bare Group 15 elements and Fe(CO)₃^?. Chemical bonding analyses on the whole series of AFe(CO)₃^? (A=N, P, As, Sb, Bi, Mc) complexes indicate that the valence orbitals involved in the triple bonds are hybridized 3d and 4p atomic orbitals of iron, leading to an unusual (dp–p) type of transition‐metal–main‐group‐element multiple bonding. The σ‐type three‐orbital interaction between Fe 3d/4p and Group 15 np valence orbitals plays an important role in the bonding and stability of the heavier AFe(CO)₃^? (A=As, Sb, Bi) complexes.     

Transition‐Metal Complexes [(PMe3)2Cl2M(E)] and [(PMe3)2(CO)2M(E)] with Naked Group 14 Atoms (E=C–Sn) as Ligands; Part 2: Complexation with W(CO)5

Density functional calculations at the BP86/TZ2P level were carried out to understand the ligand properties of the 16‐valence‐electron(VE) Group 14 complexes [(PMe₃)₂Cl₂M(E)] ( 1ME ) and the 18‐VE Group 14 complexes [(PMe₃)₂(CO)₂M(E)] ( 2ME ; M=Fe, Ru, Os; E=C, Si, Ge, Sn) in complexation with W(CO)₅. Calculations were also carried out for the complexes (CO)₅W–EO. The complexes [(PMe₃)₂Cl₂M(E)] and [(PMe₃)₂(CO)₂M(E)] bind strongly to W(CO)₅ yielding the adducts 1ME–W(CO)₅ and 2ME–W(CO)₅ , which have C_2v equilibrium geometries. The bond strengths of the heavier Group 14 ligands 1ME (E=Si–Sn) are uniformly larger, by about 6–7 kcal mol^?1, than those of the respective EO ligand in (CO)₅W‐EO, while the carbon complexes 1MC–W(CO)₅ have comparable bond dissociation energies (BDE) to CO. The heavier 18‐VE ligands 2ME (E=Si–Sn) are about 23–25 kcal mol^?1 more strongly bonded than the associated EO ligand, while the BDE of 2MC is about 17–21 kcal mol^?1 larger than that of CO. Analysis of the bonding with an energy‐decomposition scheme reveals that 1ME is isolobal with EO and that the nature of the bonding in 1ME–W(CO)₅ is very similar to that in (CO)₅W–EO. The ligands 1ME are slightly weaker π acceptors than EO while the π‐acceptor strength of 2ME is even lower.