DC dielectric study of polyethylene/CaCO3 composites

The dielectric properties of composite samples prepared by polymerizing ethylene on the surface of filler are compared to those of mechanical mixtures consisting of CaCO₃ and ultra high molecular weight polyethylene. After presenting the normalized master curves of AC dispersion and loss measured at different relative humidities, the field strength dependence of the 50 Hz AC and DC responses were studied. With one exception, the effect is small. Thermally stimulated polarization (TSP) and depolarization (TSD) curves are presented; the peak appearing on the TSP curves of the samples stored under ambient conditions is interpreted as a result of water desorption. The high temperature DC conductivity and the depolarization current density are higher in the composites and mechanical mixtures than in the matrix. The dielectric properties of the wet filler particles were calculated from the measured composite and matrix data using various mixture formulae. The results can be understood and interpreted if the dielectric properties of adsorbed water are described by the cluster theory of dielectric relaxation.     

Conformational change of poly(L-lysine) and poly(L-ornithine) and cooperative binding of sodium alkanesulfonate surfactants with different chain length

Conformations of poly(L-lysine) (PLL) and poly(L-ornithine) (PLO) were examined in aqueous solutions of sodium alkanesulfontates (C_nSO₃Na, n=9, 10, 11, 12) in the presence of 0.02 M NaCl by circular dichroism (CD) spectroscopy. These surfactants induce the-structure for PLL and the-helix for PLO. The binding of surfactants on the polypeptides was measured potentiometrically with a surfactant ion electrode and was found to be highly cooperative. The cooperativity increases with increasing chain length of surfactant. The behavior accompanying the surfactant binding and the conformational change indicated that the conformational change requires a certain amount of bound surfactants in the case of C₉SO₃Na and starts immediately on binding of surfactant in the case of C_{1 2}SO₃Na. The clustering of bound surfactants due to the cooperative binding as well as neutralization of polypeptides contributes to their conformational change. A slow conformational change of PLO was found in the time scale of hours, sometimes days, for C₉- and C₁₀SO₃Na at low concentrations, but the binding process reached the equilibrium quickly. This slow mode might occur due to the slow interaction between surfactant/polypeptide complexes.     

Phase behavior and dynamic properties in mixed systems of anionic and cationic surfactants: lithium perfluorooctanesulfonate/diethanolheptadecafluoro-2-undecanolmethylammonium chloride (DEFUMAC) and lithium dodecyl sulfate/DEFUMAC aqueous mixtures

Two ternary phase diagrams of the cationic perfluorosurfactant diethanolheptadecafluoro-2-undecanolmethylammonium chloride (DEFUMAC) with an anionic perfluorosurfactant lithium perfluorooctanesulfonate (LiFOS) and an anionic hydrocarbon surfactant lithium dodecyl sulfate (LiDS) have been established at 25°C. The total surfactant concentration was less than 20wt%. In a wide mixing region of the LiFOS/DEFUMAC system, a lamellar-type phase,P , was identified by its texture under a polarization microscope and by its x-ray diffraction pattern. Dispersed fragments ofP -phase are present in the dilute solutions in which one surfactant was in excess. The anisotropy of electrical conductivity, flow birefringence, dynamic light scattering, and electric briefringence demonstrate that theP fragments are disk-like with a radius of 0.7 m. The disk-likeP particles are transformed by shear into a spherical aggregate ofL above a critical shear gradient. LiDS/DEFUMAC mixed solution forms dispersed and precipitatedL in the dominant region. Radius and micropolarity of the dispersedL aggregates are decreased as the ratio of LiDS:DEFUMAC approaches 1:1. On the basis of x-ray diffraction measurement the structure of precipitatedL -phase seems to consist of monolayers.     

Dielectric properties of moist CaCO3 filled polyethylene composites

The capacitance and the dielectric loss tangents of CaCO₃ filled polyethylene composites were studied. Composite samples, prepared by polymerizing ethylene on the surfaces of fillers, pre-treated by polymerization catalysts, were compared to normal mechanical mixtures. Dielectric dispersion,, and loss, , proved to be sensitive to heating or vacuum treatment. Investigation of samples under conditions of different relative humidities showed that the dielectric dispersion is due to adsorbed water. Both and increased with decreasing frequency and the ratio of loss and dispersion was nearly constant. Dielectric data measured at different relative humidities could be represented by a single Cole-Cole plot. Samples soaked in water for different periods yielded qualitatively similar but quantitatively different Cole-Cole plots. Composite samples showed higher losses at similar humidities.Possible interpretations in terms of a molecular relaxation model, an interfacial relaxation model, including a charged double layer mechanism, percolation theory and the universal response theory were examined, but none was able to fully explain the observed phenomena.     

Thermally stimulated currents in poly(bis(p-fluorophenoxy)phosphazene)

Thermally stimulated currents (TSC) were examined for poly(bis(p-fluorophenoxy)phosphazene) (PBFPP) film. TSC showed peaks at the glass transition temperature (Tg=–4 °C) and atT(1) (160 °C – 170 °C), where-form crystal phase transformed to mesophase of-form structure. Another peak was found atT _cc betweenTg andT(1). Linear relationship between polarization field and peak current ofT _cc -peak was found, which shows thatT _cc -peak was caused by motion of dipolar groups in crystalline phase. When heating (up to 200 °C) and cooling (down to 20 °C) thermal process was repeated,T _cc -peak shifted to higher temperature region approachingT(1) and simultaneously, the peak current ofT(1)-peak became smaller. Activation energy, time constant of dipolar relaxation and charge mobility were evaluated forT _cc -peak. From these results, it was concluded that-form and more ordered- form crystalline phases coexisted in PBFPP once heated aboveT(1) and the content of- form phase increased by repeated thermal hysteresis.     

Hemolytic activity of polyoxyethylene cholesteryl ethers

Hemolytic activity of nonionic surfactants, polyoxyethylene cholesteryl ethers, C₂₇H₄₅O(CH₂CH₂O) _n H (Chol-E _n ,n=, 25, 30, 50) and polyoxyethylene dihydrocholeseryl ethers, C₂₇H₄₇O(CH₂CH₂O) _n H (DHChol-E _n ,n=15, 30 50) were measured, changing the concentration of surfactant and erythrocyte at 37 °C. Maximum hemolytic activity was observed in these cholesteryl derivatives with 25–30 oxyethylene units. The time course of hemolysis was also measured as a function of the concentrations of surfactant and erythrocyte. Hemolysis started after a certain induction period,, and then apparently proceeded as a first-order reaction with respect to the erythrocyte concentration. The surfactant inducing 50% hemolysis at low concentration had a small value and large rate constant. The maximum amount of adsorption without inducing hemolysis,a ₀, decreased with increasing polyoxyethylene chain length. Chol-E₂₅ has the maximum activity for the solubilization of egg yolk lecithin at 37 °C. Based on these results, the mechanism of hemolysis by these surfactants was quantitatively discussed.     

Physicochemical properties of α, ω-type bolaform surfactant in aqueous solution. Eicosane-1,20-bis(triethylammonium bromide)

The physicochemical properties of the, - type (bolaform) surfactant, eicosane-1, 20-bis(triethylammonium bromide) (C₂₀Et₆), in aqueous solution have been investigated by means of surface tension, electrical conductivity, dye solubilization, and time-resolved fluorescence quenching (determination of average micelle aggregation number). Using electrical conductivity, the critical micelle concentration of C₂₀Et₆ was found to be 6.0×10^–3 mol dm^–3 and the ionization degree of C²⁰Et₆ micelle was found to be 0.42. From surface tension measurments, the molecular area of C₂₀Et₆ at the air-water interface was about twice that of normal type surfactants such as dodecyltrimethylammonium bromide (DTAB). The solubilizing power of micellar solution of C₂₀Et₆ toward Orange OT was 1.0×10^–2 mole of dye per mole of surfactant, i. e., slightly smaller than that of DTAB. The micelle aggregation number,N, was found to be 17±2 by time-resolved fluorescence quenching. C₂₀Et₆ showed a very small temperature dependence ofN, much less than for normal surfactants.     

Adsorption of anionic surfactants on positively charged polystyrene particles II

In the case of cationic polystyrene latex, the adsorption of anionic surfactants involves a strong electrostatic interaction between both the particle and the surfactant, which may affect the conformation of the surfactant molecules adsorbed onto the latex-particle surface. The adsorption isotherms showed that adsorption takes place according to two different mechanisms. First, the initial adsorption of the anionic surfactant molecules on cationic polystyrene surface would be due to the attractive electrostatic interaction between both ionic groups, laying the alkyl-chains of surfactant molecules flat on the surface as a consequence of the hydrophobic interaction between these chains and the polystyrene particle surface, which is predominantly hydrophobic. Second, at higher surface coverage the adsorbed surfactant molecules may move into a partly vertical orientation with some head groups facing the solution. According to this second mechanism the hydrophobic interactions of hydrocarbon chains play an important role in the adsorption of surfactant molecules at high surface coverage. This would account for the very high negative mobilities obtained at surfactant concentration higher than 5×10^–7 M. Under high surface-coverage conditions, some electrophoretic mobility measurements were performed at different ionic strength. The appearance of a maximum in the mobility-ionic strength curves seems to depend upon alkyl-chain length. Also the effects of temperature and pH on mobilities of anionic surfactant-cationic latex particles have been studied. The mobility of the particles covered by alkyl-sulphonate surfactants varied with the pH in a similar manner as it does with negatively charged sulphated latex particles, which indicates that the surfactant now controls the surface charge and the hydrophobic-hydrophilic character of the surface.Dedicated to the memory of Dr. Safwan Al-Khouri IbrahimPresented at the Euchem Workshop on Adsorption of Surfactants and Macromolecules from Solution, Åbo (Turku), Finland, June 1989     

Stability of modified surface CaCO3 in the non-polar medium

The adsorption isotherm of methacrylic acid (MAA) and polymethacrylic acid (PMAA) molecules on CaCO₃ were studied. The isotherm of (MAA) adsorption from cyclohexane was found formed from two steps, while that of (PMAA) from ethanol is formed from one step. The effects of surface modification of CaO₃ with (MAA) and (PMAA) in the sedimentation properties in a non-polar medium (cyclohexane) have been studied. It was found that the most stable suspension formed is concerned with monolayer surface coverage for the two adsorptives. Also, studies were made for the rheological properties of concentrated suspension of CaCO₃ modified with (MAA) and (PMAA) in a paraffin oil. The equilibrium flow curves of CaCO₃ modified with (PMAA) suspensions exhibit pseudoplastic characteristics, accompanied by some degree of complex thixotropy, while that modified with (MAA) exerts a thickening effect with rheopexy characteristics.     

Phase diagram of the system dihexadecylphosphatidylcholine/dihexadecyl-phosphatidic acid/water/NaOH at pH=14

Differential-scanning-calorimetry, freeze-fracture electron microscopy, and³¹P-NMR spectroscopy were used to study the lyotropic and thermotropic properties of the system dihexadecylphosphatidylcholine/dihexadecylphosphatidic acid/water/ NaOH in dispersion with excess water at pH=14. The phase diagram showed that both phospholipids are demixed nearly completely in the gel phase. The coexistence of theP and theB -phase in the mixtures was pointed out in the freeze-fracture electron micrographs by the ripple structure (P -phase) and by the lamellar structure (B -phase).     

Effects of urea and a nonionic surfactant on the micellization and counterion binding properties of cetyltrimethyl ammonium bromide and sodium dodecyl sulfate

Micellization characteristics and counterion binding properties of cetyltrimethyl ammonium bromide (CTAB) in presence of urea and a nonionic surfactant polyoxyethylene sorbitan monolaurate (PSML), and of sodium dodecyl sulphate (SDS) in presence of urea as well as of several mixtures of CTAB with a bile salt, sodium cholate (NaC), and sodium chloride have been studied. Both urea and PSML have increased the critical micelle concentration (CMC) of the surfactants, the former being more effective than the latter. The analysis of the results supports the pseudophase micellar model to hold over the mass action model. Pure CTAB micelles bind more counterions (96 %) than pure SDS micelles (87 %), and the decreasing effect of urea on the binding is less in case of the former than the latter. A 41 mixture of CTAB and sodium cholate (NaC) can micellize and the micelles bind 87 % bromide ion, whereas 21 and 11 mixtures do not micellize. Micelles of 11 mixture of CTAB and NaCl can bind counter bromide ions to the extent of 92 %. The limiting concentrations of urea required to effect counterion binding by CTAB and SDS micelles are 0.15 mol dm^–3 and 0.25 mol dm^–3, respectively. Such effect is shown by PSML on CTAB at a ratio 0.281. The activation energy of conduction of SDS has increased in the presence of urea up to a concentration of 4 mol dm^–3, at higher concentrations the activation energy has decreased, the effect being more for surfactant concentration above CMC than below.     

Gas permeability of block copolymers of styrene and butadiene

The permeability of styrene-butadiene block copolymer foils with different composition prepared by casting and pressing has been investigated for the gases Ar, CO₂, and CH₄ at pressure difference of 400 mbar and at the temperature range 298 T [K] 333.The permeation process can be described by the solution diffusion mechanism. The diffusion coefficients decrease in the sequence of the gases Ar, CO₂, and CH₄ and the solubility coefficients increase in the sequence Ar, CH₄, CO₂.The dependence of the permeability on the composition of the block copolymer can be interpreted by the help of percolation theory and the effective medium theory. It follows the critical volume fraction of the percolation of the transport phase _PB ^c (= 0,23) and the coordination numberz (= 4) giving an information concerning the multiphase structure of the block copolymer.Presented in part at the 33^rd Annual Meeting of the Colloid-Gesellschaft, Graz, Austria, September 14–16, 1987.     

Dynamic shear compliance of polymer melts and networks in dependence on crosslinking density

Mechanical relaxation processes in polymer melts and networks are discussed. This is performed by decomposing master curves of the dynamic shear compliance into i) glass relaxation with its plateau complianceJ _eN ; ii) shearband process with its relaxation strengthJ _B , which is reciprocal to the total crosslink densityp _c ; and iii) flow relaxationJ _F and viscous flow (for uncrosslinked melts only). Plateau complianceJ _eN > is exponentially reduced only by effective crosslinks (p _c ^* p _c /30). This behavior is understood on the level of a meander superstructure, which includes shearbands. The observed saturation inJ _eN at higher dicumylperoxide (DCUP) crosslinking-which doesn't appear with radiation-can be explained by the lack of chemically induced effective crosslinks across the interfaces among meander cubes. This lack may be a consequence of DCUP molecules concentrating at the interfaces and thereby preventing the contact and radical recombination between chains at adjacent meander faces.Crosslink densitiesp _c (per monomer), determined from the reduction of shearband relaxation strength, vary linearly with the crosslinking agent and read: p_c2.4 · 10^–2 Dose/MGy andp _c 0.97 · 10^–2 DCUP/phr for radiation and DCUP crosslinking, respectively. This implies, e.g., that a dose of 0.4 MGy (40 Mrad) is equivalent to 1 part DCUP phr in a crosslinking polyisoprene. From activation-curve analysis it follows that3 r/d stays constant, and _s - _so (free energy of formation of a segment-dislocation) andQ _y -Q _yo (activation energy for segmental jumps) vary with the square ofP _c , as does the glass temperaturT _g -T _go from DSC measurements.     

Electrolytic conductivity of poly(1,3-propylene phosphate) solutions containing mono- and divalent-counterions

The results of conductivity measurements for aqueous solutions of poly(1,3-propylene phosphate) (PPP), which can be considered as a synthetic analogue of naturally occurring teichoic acids, are reported. Experiments were carried out with oligomeric fractions of a polymer in acidic, sodium, potassium, magnesium and calcium forms. The concentration and molecular weight dependence of the equivalent conductivity of PPP was analysed and the limiting equivalent conductivity determined. From the conductivity data, the polyion-counterion interaction parameter F and the equivalent conductivity of a polyion _p were calculated. It was shown that both F and _p depend on polyelectrolyte solution concentration and molecular weight of PPP. Conclusions concerning mono- and divalent metal ions binding to PPP are drawn.     

Association of poly-(L-lysine) homologues in sodium carbonate solution

The molecular weights of isopoly(L-Iysine), poly(L-ornithine), and poly(L-, -diaminobutylic acid), the homologues of poly (L-lysine), were determined by the sedimentation equilibrium method in aqueous solutions of 1.0 M NaCl or 0.1 M Na₂CO₃. In every sample the molecular weights in the presence of carbonate ions was twice that in NaCl solution. In a previous paper we reported that poly(L-lysine) behaved as a dimer at concentrations higher than 0.4 g/dl in the presence of carbonate ions and as a monomer in dilute solution, and these two forms were related by a monomer-dimer equilibrium. The homologues did not have a monomer-dimer equilibrium relationship under the conditions of the measurements that we carried out. The CD spectrum of isopoly(L-lysine) in water showed a uniform increase with a decrease in the wave length in the presence of carbonate ions. However, in the alkaline region in NaOH solution, the spectrum changed and a small minimum at 212 nm was found. When additional carbonate ions were added a large minimum at 205 nm was observed. This result can be explained by a change in the conformation from a random coil to a regular structure. We could not compare isopoly(L-lysine) with other polypeptides, because it does not have peptide bonds. The CD spectra of poly(L-ornithine) and poly(L-, -diaminobutylic acid) in NaOH or Na₂CO₃ solutions showed only slightly regular structures. It was also confirmed that the dimer-structures of the poly (L-lysine) homologues do not have regular structures.This paper was presented at the VI. Symposium on Analytical Ultracentrifugation, Marburg, FRG, February 16–17,1989.     

CPS GL 799

The effect of illumination on transport of sulfonated bisazo direct dyes, CI Direct Yellow 12, and CI Direct Yellow 4, into a cellulose membrane has been studied at various temperatures. Transport of CI Direct Yellow 12, which exhibits photoinduced reversible trans-cis isomerism in aqueous solution into a cellulose membrane, was influenced by illumination. It is likely that the transport was influenced by transisomerization of the photoisomeric dye and the diffusivity was controlled by surface diffusion rather than by pore diffusion under both light and dark conditions.Notations C Concentration of dye in the pores (mol/dm³) - C _E Concentration of electrolyte in the bulk solution (mol/dm³) - C _o Concentration of dye in the bulk solution (mol/dm³) - D _p Pore diffusivity (m²/s) - D _s Surface diffusivity (m²/s) - [M] Mean concentration of dye in membrane (mol/dm³) - [M] _L Local concentration of dye in membrane (=q+ _p C) (mol/dm³) - [M] Mean concentration of dye in membrane (mol/kg) - [M] _L Local concentration of dye in membrane (=q/V+ _p C) (mol/dm³) - F Fractional attainment of equilibrium - l Thickness of membrane (m) - q Concentration of dye adsorbed on pore wall (mol/dm³) - q _o Adsorbed concentration of dye in equilibrium withC _o (mol/dm³) - q Concentration of dye adsorbed on pore wall (mol/kg) - q _o Adsorbed concentration of dye in equilibrium withC _o (mol/kg) - t Time (s) - V Volume of membrane swollen with water per unit dry cellulose (dm³/kg) - x C/C _o - y q/q _o - z Distance that the dye diffused in the membrane (m) - q _o / _o C _o - D _s /D _p - Coefficient of the Freundlich isotherm - _p Pore void fraction - z/l - _p D _p t/l ² - _s D _s t/l ²     

Surface characterization of modified glass fibers by inverse gas chromatography

The dispersive component of the surface free energy _d ^s of glass fibers and their acid-base interaction can be evaluated by the measurement of specific retention volumes of several kinds of probe molecules by use of an inverse gas chromatography. The effect of the treatment of glass fibers with silane-coupling agents was also evaluated. The specific retention volumes of n-alkanes changed linearly with theirC number or vapor pressure. Those of polar molecules varied with their donor number (DN) or acceptor number (AN). The _s ^d values and electron-accepting or donating abilities depended upon the kind of functional groups contained in the coupling agents.     

XPS analysis (ESCA) of the surface composition of poly(styrene/2-hydroxyethyl methacrylate) microspheres produced by emulsifier-free emulsion polymerization

Polymer microspheres composed of various compositions of styrene and 2-hydroxyethyl methacrylate (HEMA) were produced by batch emulsifier-free emulsion polymerization. The HEMA content at the surface, [HEMA] _s , of the microspheres powdered by freeze-drying was determined by both quantitativeC ^1s /O ^1s analysis andC ^1s peak shape analysis of the x-ray photoelectron spectroscopic spectra. When the HEMA content in the microsphere, [HEMA] _p , was less than about 5 mole%, the [HEMA] _s values determined by the two different methods showed good agreement. At [HEMA]_p above 5 mole %, [HEMA]_s values determined by the first method were about 15 mole % greater than those determined by the second. They both showed a similar tendency with the [HEMA] _s being higher than the [HEMA] _p , e.g., when [HEMA] _p was 1 mole %, [HEMA] _s was 11 mole %. The intensity of the satellite peak due to the ^* transition of the benzene ring of the styrene component decreased with an increase in [HEMA] _p , to zero at 5 mole % of [HEMA] _p . These results indicate that the HEMA component is localized at the surface.Part CVIII of the series Studies on Suspension and Emulsion.     

Changes of mesophase structure of BRIJ 96/water mixtures on addition of liquid paraffin

The influence of the addition of liquid paraffin (LP) on the structure of the lamellar (L ) and hexagonal (H₁) mesophases formed in mixtures of water (W) and BRIJ 96 (B) was studied. Mesophases were identified using polarization microscopy and small angle x-ray diffraction (SAXD). Repeat spacings were also determined with SAXD. Depending on theW/B ratio, addtion ofLP toL gives a large, almost linear one-dimensional swelling or an initial swelling followed by a gradual transition to H₁.L with a highLP-content gives a diffraction pattern showing only the first order diffraction maximum, possibly a result of undulations of the layers. The lamellar structure, however, was confirmed using freeze fracture electron microscopy (FFEM). Addition ofLP to H₁ gives an initial swelling followed by a transition to a transparent, highly viscous, isotropic phase, called the gel-phase (G). The diffraction pattern obtained fromG yields little information on its structure. A large swelling ofG withLP was observed. From the degree of swelling as a function of hydrocarbon content it was inferred that this phase consists of spherical aggregates forming a close-packed structure. Using FFEM, textures were visualized resembling those obtained from the isotropic mesophase (I₁) in water-surfactant mixtures. Finally, geometrical factors are discussed that may play a role in the formation of the gel-phase.