Synthesis of, light emission from, and optical power limiting in soluble single-walled carbon nanotubes functionalized by disubstituted polyacetylenes

Single-walled carbon nanotubes are covalently functionalized by conjugated polyacetylenes through their cyclization reactions with poly(1-phenyl-1-alkyne) and poly(diphenylacetylene) derivatives carrying azido functional groups at the ends of their alkyl pendants. The resultant polyene nanotube addends are soluble in common solvents, emit intense visible lights and strongly attenuate the power of harsh laser pulses.     

Photoinduced reactions of aryl-2H-azirines with carbonyl compounds. Preliminary communication

Irradiation of 3-phenyl-( 4 ), 2-methyl-3-phenyl-( 8 ), and 2,3-diphenyl-2H-azirine ( 10 ), in benzene solution in the presence of aldehydes, yields the corresponding aryl-3-oxazolines. Photochemical reaction of 4 and 10 with carbon dioxide leads to the formation of 4-phenyl- ( 15 ) and 2,4-diphenyl-3-oxazolin-5-one ( 16 ), respectively.     

Synthesis of a novel highly conjugated conducting polymer

The new conjugated polyacetylene derivative dehydrated poly(4-hydroxy-4-phenyl-1-butyne) [dehydrated poly(HPB)] was synthesized from poly(4-hydroxy-4-phenyl-1-butyne) [poly(HPB)], which was obtained by the polymerization of 4-hydroxy-4-phenyl-1-butyne. The resulting dehydrated poly(HPB) was soluble in common organic solvents. The dehydrated poly(HPB) was found to have extended conjugated polyene structure. The dehydrated poly(HPB) was thermally stable up to 300°C. The electrical conductivity of I₂-doped dehydrated poly(HPB) was 10⁻² S cm⁻¹. © 1998 John Wiley & Sons, Inc. J Polym Sci A: Polym Chem 36: 949–953, 1998     

The Action of Carbon Disulfide and Sulfur on Enamines,Ketimines, and CH Acids

The reaction of sulfur, carbon disulfide, and enamines at room temperature leads mainly or exclusively to 3H-1,2-dithiole-3-thiones; these are occasionally accompanied by 2H-1,3-dithiole-2-thiones, which can also be prepared by a modified procedure. Many enamines react with sulfur at room temperature to form thioamides. At about 50°C, enamines of acetophenone give 2-benzylidene-4-phenyl-2H-1,3-dithiol. The action of isothiocyanates and sulfur on enamines leads to the formation of thiazolidine-2-thiones. 2H-Thiopyran-2-thiones can be prepaAred from enamines or dienamines with carbon disulfide at room temperature. The reaction of ketimines (Schiff bases) with carbon disulfide and sulfur yields 3H-1,2-dithiole-3-thiones or isothiazoline-5-thiones. The reaction of alkynes with sulfur and carbon disulfide leads to 2H-1,3-dithiole-2-thiones. Nitriles containing active methylene groups react with carbon disulfide and sulfur to form 5-amino-3H-1,2-dithiole-3-thiones. When isothiocyanates are used instead of CS₂, the reaction leads to δ⁴-4-amino-thiazoline-2-thiones.     

Poly(enonsulfides) from the addition of aromatic dithiols to aromatic dipropynones

Novel poly(enonsulfides) were prepared with inherent viscosities as high as 1.35 dL/g by nucleophilic addition of various aromatic dithiols to 1,1′-(1,3- or 1,4-phenylene)bis(3-phenyl-2-propyn-1-one) in m-cresol at 25–40°C. A tough clear yellow film with a tensile strength of 11,300 psi and a tensile modulus of 466,000 psi at 25°C was cast from a chloroform solution of the polymer prepared from 1,3-dithiobenzene and 1,1′-(1,4-phenylene)bis(3-phenyl-2-propyn-1-one). The poly(enonsulfides) exhibited T_g's as high as 180°C and weight losses of approximately 10% at 331°C in air. The synthesis and characterization of several poly(enonsulfides) are discussed.     

Electron ionization mass spectra of aryl- and benzyl-substituted 2,3-dihydroimidazo[1,2-a]pyrimidine-5,7(1H,6H)-diones

The electron ionization mass spectra of the 1-phenyl-, 1-benzyl- and 6-benzyl-1-phenyl-2,3-dihydroimidazo[1,2-a]pyrimidine-5,7(1H,6H)-dione derivatives were recorded at 70 eV to find out the effects of substituents on their fragmentations. Fragmentation pathways were studied using B/E and B(2)/E scans. Some fragmentations involved the loss of C(3)HO(2) or carbon suboxide. The possibility of keto-enol tautomerism was also studied. For comparison selected compounds were studied using (1)H and (13)C NMR spectroscopy to reveal the presence of possible tautomerism. Some ions including [M-OH](+) and [M-HCO](+) and NMR results indicate that the enol form is predominant both in the gas and in the liquid phase.     

The role of ion-molecule pairs in solvolysis reactions. Nucleophilic addition of water to a tertiary allylic carbocation.

The acid-catalyzed solvolysis of 2-methoxy-2-phenyl-3-butene (1-OMe) in 9.09 vol % acetonitrile in water provides 2-hydroxy-2-phenyl-3-butene (1-OH) as the predominant product under kinetic control along with the rearranged alcohol 1-hydroxy-3-phenyl-2-butene (2-OH) and a small amount of the rearranged ether 2-OMe. The more stable isomer 2-OH is the predominant product after long reaction time, K(eq) = [2-OH](eq)/[1-OH](eq) = 16. The ether 2-OMe reacts to give 2-OH and a trace of 1-OH. Solvolysis of 1-OMe in (18)O-labeled water/acetonitrile shows complete incorporation of (18)O in the product 1-OH, confirming that the reaction involves cleavage of the carbon-oxygen bond to the allylic carbon. A completely solvent-equilibrated allylic carbocation is not formed since the solvolysis of the corresponding chloride 1-chloro-3-phenyl-2-butene (2-Cl) yields a larger fraction of 1-OH. This may be attributed to a shielding effect from the chloride leaving group. Quantum chemical calculations of the geometry and charge distribution show that the cation should rather be described as a vinyl-substituted benzyl cation than as an allyl cation, which is in accord with its higher reactivity at the tertiary carbon.     

Ultraviolet spectra of 2-phenyl-4- and 2-phenyl-5-azaindan-1, 3-diones

The UV spectra of 2-phenyl-4-azaindan-1, 3-dione (I), 2-phenyl-5-azaindan-1, 3-dione (II), and their N-methylbetaines are investigated. 2×10^–5 M aqueous alcoholic solutions of 2-phenyl-4-azaindan-1, 3-dione (I) contain the anionic form (IA), and in solutions of 2-phenyl-5-azaindan-1, 3-dione (II) the betaine form (IIB) is also in equilibrium with the anion (IIA). Solutions of I and II in 0.1 M sulfuric acid are characterized by a wide and rather intense absorption band at about 500 m, indicating the presence of a betaine form (IB and IIB). In 2M hydrochloric acid solution 2-phenylazaindan-1, 3-diones and their N-methylbetaines (III and IV) are protonated at the oxygen atom, giving the enol forms of the N-protonated or corresponding N-methylated 2-phenylazaindandiones.     

4-Functionally-substituted 3-Heterylpyrazoles: XV. 3-Aryl(heteryl)-1-phenyl-4-pyrazolylmethylamines and Heterocumulenes Obtained Therefrom

By reduction of 3-aryl(heteryl)-1-phenyl-4-azidomethyl-pyrazoles in the presence of Raney nickel or by hydrazinolysis of N-[3-aryl(heteryl)-1-phenyl-4-pyrazolylmethyl]phthalimides 4-pyrazolylmethylamines were obtained that in reaction with bis(trichloromethyl) carbonate afforded 3-aryl-(heteryl)-1-phenyl-4-pyrazolylmethyl isocyanates, and with carbon disulfide furnished 3-aryl-(heteryl)-1-phenyl-4-pyrazolylmethyl isothiocyanates.__________Translated from Zhurnal Organicheskoi Khimii, Vol. 41, No. 2, 2005, pp. 247–251.Original Russian Text Copyright © 2005 by Bratenko, Panimarchuk, Mel’nichenko, Vovk.     

Elucidation of the structures of 3-alkylthio-, 3-benzylthio-, 2-arylthio- and 2-heteroarylthio-N1-(1,3-dimethylbutyl)-N4-phenyl-1,4-phenylenediamines by one- and two-dimensional NMR spectroscopy

Nucleophilic addition of alkyl- and benzylthiols to benzoquinone diimine (1) gave the corresponding 3-alkylthio- or 3-benzylthio-1,4-phenylenediamines (2-5). However, addition of aryl- or heteroarylthiols to 1 formed 2-arylthio- or 2-heteroarylthio-1,4-phenylenediamines (6-14). The structures of 2-14, obtained in 55-91% yields, were confirmed in CDCl3 or DMSO-d6 solution using 1D (NOE difference, coupled 13C NMR spectra, APT and DEPT) and 2D NMR techniques [DQCOSY, NOESY, HETCOR and heteronuclear multiple bond coherence (HMBC)] that resulted in unambiguous proton and carbon NMR resonance assignments. The substituent-induced 13C NMR chemical shift differences were calculated in 2-14 relative to carbon atoms in the model compound N1-(1,3-dimethylbutyl)-N4-phenyl-1,4-phenylenediamine (DMBPPD) (15) (a reduced form of benzoquinone diimine).     

Direct analysis of volatile organic compounds in human breath using a miniaturized cylindrical ion trap mass spectrometer with a membrane inlet

Membrane introduction mass spectrometry (MIMS) coupled to a miniature mass spectrometer equipped with a cylindrical ion trap (CIT) analyzer was used to monitor the flavor components, 3-phenyl-2-propenal and methyl salicylate, found in cinnamon and wintergreen candies, respectively, directly from human breath. The poly(dimethylsiloxane) (PDMS) membrane was operated in a trap-and-release mode, where the temperature of the membrane was cycled during the experiments, which permitted temporal resolution of the two compounds of interest, facilitating their observation in the complex sample. Under these thermally driven conditions, the 10-90% rise times for both compounds are similar (15 s for methyl salicylate, 17 s for 3-phenyl-2-propenal), but the difference in diffusivity means that the signal for 3-phenyl-2-propenal is delayed and the 10% point occurs 6 s later than that for wintergreen. Additional specificity needed for complex samples was gained by using tandem mass spectrometry.     

Characterization of aromatic polymers (benzenoid and heterocyclic) by cross-polarization,magic-angle 13C-NMR spectroscopy

The cross-polarization, magic-angle ¹³C-NMR spectra of solid samples of poly(p-phenylene), its nitro derivative, polymerized biphenyl, poly(p-phenylene sulfide), poly(1-methyl-2,5-pyrrolylene), poly(1-phenyl-2,5-pyrrolylene), poly(2,5-thienylene), and poly(2,5-selenienylene) and the high-resolution ¹³C-NMR spectrum of poly(m-phenylene) in solution are presented and assigned. In all cases the chemical shifts are similar to those of model compounds in solution. In most instances the resonances of the nonprotonated carbon atoms in the solid polymers are more intense than those of the protonated carbons and appear to depend on the charge distribution in the molecular orbitals.     

螺旋链聚甲基丙烯酸三苯甲酯包敷硅胶分离旋光异构体

用螺旋链聚甲基丙烯酸三苯甲酯（ＰＴｒＭＡ）包敷硅胶高效液相色谱法分离了十五对ＰＴＨ衍生氨基酸和药物旋光异构体,十四对系首次在ＰＴｒＭＡ柱上进行分离,其中十三对旋光异构体获得了分离。     

Synthesis and Properties of Biodegradable Copolymers of 9-Phenyl-2, 4, 8, 10-tetraoxaspiro-[5, 5]undcane-3-one and Ethylene Ethyl Phosphate

Novel biodegradable copolymer poly（CC-co-EEP） was synthesized by ring-opening copolymerization of cyclic carbonate 9-phenyl-2, 4, 8, 10-tetraoxaspiro-[5, 5]undcane-3-one （CC） and ethylene ethyl phosphate （EEP）. The obtained poly （CC-co-EEP）s were characterized by FTIR, ^1H NMR, ^13C NMR and gel permeation chromatography （GPC）. In vitro hydrolytic degradation of the copolymers were investigated in phosphate buffer solution （pH=7.4）. Hydrophilic phosphate units apparently improved the degradability of poly（carbonate-phosphate）.     

The solid-state michael addition of indole to 4-arylidene-3-methyl-5-pyrazolone

The Michael addition reactions of indole to 4-arylidene-3-methyl-1-phenyl-5-pyrazolone 1 were investigated in the solid state, by which a series of new compounds, 1-aryl-1-(3-indolyl)-1-(3′-methyl-1′-phenyl-5′-pyrazolon-4′-yl)methanes 2 , were easily obtained. This provides a feasible method of preparing novel compounds containing two heterocyclic groups at the same carbon.     

THE EFFECTS OF MONOMER STRUCTURE OF CYCLIC KETENE ACETALS ON THE BEHAVIOR OF CONTROLLED RADICAL RING-OPENING POLYMERIZATION

Polymerization of three cyclic ketene acetals: i.e., 5,6-benzo-2-methylene-1,3-dioxepane (BMDO), 2-methylene-4-phenyl-1,3-dioxolane (MPDO) and 4, 7-dimethyl-2-methylene-1, 3-dioxepane(DMMDO) were carried out in the presence ofethyl α-bromobutyrate/CuBr/2, 2'-bipyridine respectively. The structures of poly(BMDO), poly(MPDO) and poly(DMMDO)were characterized by ~1H and ~(13)C-NMR spectra. The effects of monomer structure on the behavior of atom transfer freeradical ring-opening polymerization were investigated and the mechanism of controlled free radical ring-openingpolymerization was discussed.     

Synthesis of bis-3-alkyl-5-arylhydantoins and bis-3-alkyl-5-arylthiohydantoins separated by two and four carbon atoms

Synthesis of 1,2- and 1,4-bis-thiohydantoins and hydantoins employing ethylenediamine and 1,4-diaminobutane as spacers is described. Compounds containing a two carbon bridge were synthesized by alkylation of ethylenediamine with two equivalents of N-t-butyl-α-(p-toluenesulfonyloxy)phenylacetamide 3 . The phenyl isothiocyanate adduct of 3 cyclized in refluxing toluene to form 1a . Other isothiocyanate or isocyanate adducts derived from alkylation product 4 required hydrolysis to induce cyclization. Compounds 1b-1f were obtained in this way. Compounds with a four carbon bridge were obtained by reaction of two equivalents of methyl α-bromophenyl acetate and 1,4-diaminobutane to produce N,N'-bis-[(α-phenyl-α-methoxycarbonyl)methyl]butylenediamine 6 . The isothiocyanate or isocyanate adducts from 6 cyclized, without hydrolysis, to form compounds 2a-2e .     

Selenium heterocycles. XXX. Synthesis of 4-substituted vinyl 2-thioxo-1,3-dithioles and 5-substituted vinyl 2-thioxo-1,3-thiaselenoles

4-Substituted vinyl and 4-(4-phenyl-1,3-butadienyl)-1,2,3-thiadiazoles were prepared through the reaction of 4-aryl-3-buten-2-one semicarbazone and 6-phenyl-3,5-hexadien-2-one semicarbazone with thionyl chloride, respectively. Decomposition of these 1,2,3-thiadiazoles as well as the corresponding 1,2,3-selenadiazoles with base and subsequent addition of carbon disulfide afforded 4-substituted vinyl 2-thioxo-1,3-dithioles and 5-substituted vinyl 2-thioxo-1,3-thiaselenoles.     

Photochemische Cycloadditionen von 3-Phenyl-2H-azirinen mit kumulierten Doppelbindungen. Vorläufige Mitteilung

Irradiation of 2-methyl- ( 1c ) and 2,2-dimethyl-3-phenyl-2H-azirine ( 1d ) in benzene solution in the presence of carbon dioxide yields 2-methyl-4-phenyl- ( 3c ) and 2,2-dimethyl-4-phenyl-3-oxazolin-5-one ( 3d ), respectively. Similar cycloadducts are observed (see table) when 2,3-diphenyl-2H-azirine ( 1b ) and 1d are irradiated in the presence of phenylisocyanate, o-tolylisocyanate, phenylisothiocyanate or di-o-tolyl-carbodiimide.