Synthesis and crystal structures of schiff base copper(II) complexes [Cu(L1)(NCS)], [CuBr(L2)], and [CuCl(L3)]

A series of copper(II) complexes, [Cu(L¹)(NCS)] (I), [CuBr(L²)] (II), and [CuCl(L³)] (III), where L¹, L², and L³ are 2,4-dibromo-6-[(pyridin-2-ylmethylimino)methyl]phenolate, 4-chloro-2-[(pyridin-2-ylmethylimino)methyl]phenolate, and 1-[(pyridin-2-ylmethylimino)methyl]-naphthalen-2-ol, respectively, were prepared. The complexes were characterized by elemental analysis, IR spectra, and single crystal X-ray determination. The crystals of the three complexes crystalize in the monoclinic space group P2₁/n. For I, a = 8.127(2), b = 13.077(3), c = 14.967(3) Å, β = 91.975(2)°, V = 1589.8(6) ų, Z = 4. For II, a = 7.736(2), b = 10.613(2), c = 16.199(3) Å, β = 91.130(2)°, V = 1329.8(5) ų, Z = 4. For III, a = 8.062(2), b = 8.599(2), c = 21.087(2) Å, β = 100.338(2)°, V = 1438.1(4) ų, Z = 4. The Cu atom in each of the complexes is in square planar geometry.     

Synthesis and Crystal Structure of [Cr(thd)2(OEt)]2

The mixed‐ligand complex [Cr(thd)₂(OEt)]₂ [(thd)^– = anion of H(thd) = C₁₁H₂₀O₂ = 2,2,6,6‐tetramethylheptane‐3,5‐dione] appears as by‐product when EtOH/H₂O is used as solvent during preparation of Cr(thd)₃. [Cr(thd)₂(OEt)]₂ can be difficult to separate from Cr(thd)₃ by sublimation, but separation is easily accomplished by extracting Cr(thd)₃ with acetone. A detailed account for the sublimation behavior of [Cr(thd)₂(OEt)]₂/Cr(thd)₃ mixtures is advanced. Good yields of [Cr(thd)₂(OEt)]₂ are obtained when CrCl₃, H(thd), and Na(EtO) react in absolute EtOH. [Cr(thd)₂(OEt)]₂ is obtained in the form of green needle‐shaped crystals by recrystallization from toluene. The crystal structure is triclinic [a = 10.2919(15), b = 10.6686(16), c = 14.194(3) Å, α = 106.559(2), β = 107.869(2), and γ = 98.326(2)° at 295 K; space group P . The complex contains two crystallographic equivalent chromium atoms, which are bridged by two cis‐configured ethoxy groups, the four remaining sites in the octahedral coordination around each chromium atom being occupied by oxygen atoms from two thd ligands. The bond lengths and angles concur with the findings for related molecular complexes. The temperature dependence of the magnetic susceptibility of [Cr(thd)₂(OEt)]₂ follows Curie–Weiss law with Weiss constant θ ≈? –65 K and μ_p = 3.87 μ_B.     

Syntheses,crystal structures and magnetic properties of two cyano-bridged two-dimensional assemblies [Fe(salpn)]2 [Fe(CN)5NO] and [Fe(salpn)]2[Ni(CN)4]

Two cyano-bridged assemblies, [Fe^III(salpn)]₂[Fe^II(CN)₅NO] (1) and [Fe^III (salpn)]₂[Ni^II(CN)₄] (2) [salpn = N, N-1,2-propylenebis(salicylideneiminato)dianion], have been prepared and structurally and magnetically characterized. In each complex, [Fe(CN)₅NO]^2– or [Ni(CN)₄]^2– coordinates with four [Fe(salpn)]⁺ cations using four co-planar CN^– ligands, whereas each [Fe(salpn)]⁺ links two [Fe(CN)₅NO]^2– or [Ni(CN)₄]^2– ions in the trans form, which results in a two-dimensional (2D) network consisting of pillow-like octanuclear [—M^II—CN—Fe^III—NC—]₄ units (M = Fe or Ni). In complex (1), the NO group of [Fe(CN)₅NO]^2– remains monodentate and the bond angle of Fe^II—N—O is 180.0°. The variable temperature magnetic susceptibilities, measured in the 5–300 K range, show weak intralayer antiferromagnetic interactions in both complexes with the intramolecular iron(III)iron(III) exchange integrals of –0.017 cm^–1 for (1) and –0.020 cm^–1 for (2), respectively.     

Reaktionen von Lanthanoidhalogeniden mit Alkalibenzylverbindungen. Darstellung und Kristallstrukturen von [(tmeda)(C6H5CH2)2Y(μ-Br)2Li(tmeda)], [(tmeda)2SmBr(μ-Br)2Li(tmeda)] und [(dme)2SmBr(μ-Br)]2

Reactions of Lanthanide Halides with Alkalibenzyl Compounds. Synthesis and Crystal Structures of [(tmeda)(C₆H₅CH₂)₂Y(μ-Br)₂Li(tmeda)], [(tmeda)₂SmBr(μ-Br)₂Li(tmeda)] and [(dme)₂SmBr(μ-Br)]₂ Alkali-benzyl compounds react via a metathesis reaction with lanthanide halides to benzyl complexes of the rare earths. Reaction of [(C₆H₅CH₂)Li(tmeda)] with YBr₃ leads to the complex [(tmeda)Y(C₆H₅CH₂)₂ (μ-Br)₂Li(tmeda)] 1 , in which Yttrium and lithium are linked via two bromide bridges. However, the reaction of [(C₆H₅CH₂)Li(tmeda)] with SmBr₃ in toluene/tmeda leads under reduction of the Sm ion to the compound [(tmeda)₂SmBr(μ-Br)₂Li(tmeda)] 2 . 2 reacts with DME to yield the dimeric compound [(dme)₂SmBr(μ-Br)]₂ 3 . The structures of 1 – 3 were determined by X-ray single crystal structure analysis:

• 1: Space group P2₁/c, Z = 4, a = 829.5(6) pm, b = 1477.9(11) pm, c = 2575.0(10) pm, β = 92.03(6)°,
• 2: Space group P2₁, Z = 2, a = 954,7(3) pm, b = 1338.5(6) pm, c = 1244.9(5) pm, β = 107.51(3)°,
• 3: Space group P1 , Z = 1, a = 797.2(7) pm, b = 818.3(7) pm, c = 1169.7(8) pm, α = 100.96(6)°, β = 92.03(6)°, γ = 91.75(7)°.

     

Reaction of [Fe2(CO)8(mu-CF2)] with AsMe3 and other Lewis bases: syntheses, crystal structures of [Fe(CO)6(AsMe3)2(mu-CF2)] and [Fe(CO)5(AsMe3)3(mu-CF2)], and theoretical considerations

The difluorcarbene complex [Fe2(CO)8(mu-CF2)] (2) reacts with AsMe3 under CO substitution to give the mu-CF2 containing complexes [Fe2(CO)6(AsMe3)2(mu-CF2)] (4) and [Fe2(CO)5(AsMe3)3(mu-CF2)] (5) which have an [Fe2(CO)9]-like structure as shown by X-ray analyses. In the solid state, 4 forms two isomers, 4a and 4b, in a 3 to 1 ratio, which differ in the position of the mu-CF(2) ligand; 4a has a local C(2) axis and 4b has C1 symmetry. The Fe-Fe distances in 4 and 5 are 2.47 A and are the shortest ones found in [Fe2(CO)9]-like compounds. Efforts were also undertaken to replace one or more CO groups in 2 by other ligands, such as N (bpy, phen, pzy, etc.) or P donors (dppe, dppm). With dppm, only the CF(2) free complex, [Fe2(CO)4(mu-Ph2PCH2PPh2)2(mu-CO)] (6), could be detected and characterized by X-ray analysis. Most of the reactions resulted in the formation of red-brown materials which were insoluble in the usual solvents and which could not be characterized. The use of CH2Cl2 during the attempts to crystallize a product from the reaction of 2 and phen gave [Fe(phen)3]Cl2 (7) in low yields. For 4 and 5, the electronic structures were analyzed using the atoms in molecules (AIM) theory. No electron density was found between the two iron atoms, and the short contacts can be interpreted in terms of a pi-interaction.     

Ligand exchange reaction between an alkylzinc primary amide and a dialkylmagnesium compound: crystal structures of [(thf)MeMg-mu-N(H)SiiPr3]2 and (tmeda)Mg[N(H)SiiPr3]2

The reaction of alkylzinc triisopropylsilylamide with dialkylmagnesium leads to a ligand exchange. Besides the starting materials, heteroleptic alkylmagnesium triisopropylsilylamide and homoleptic magnesium bis(triisopropylsilylamide) are detected by NMR spectroscopy. After the addition of 1,2-bis(dimethylamino)ethane (TMEDA) to the reaction mixture, (tmeda)Mg[N(H)SiiPr3]2 (1) precipitates as colorless cuboids (C24H60MgN4Si2, a = 2269.6(2), b = 1029.58(5), c = 1593.2(1) pm, beta = 120.826(8) degrees , monoclinic, C2/c, Z = 4). The amide nitrogen atoms are coordinated planarily with strongly widened Mg-N-Si bond angles of 139.2(1) degrees . The metalation of triisopropylsilylamine with dimethylmagnesium in THF yields quantitatively heteroleptic [(thf)MeMg-N(H)SiiPr3]2 (2) which crystallizes as colorless needles (C28H66Mg2N2O2Si2, a = 1982.4(2), b = 2034.1(1), c = 907.22(6) pm, beta = 95.021(9), monoclinic, P2(1)/n, Z = 4). Because of the bridging position of the triisopropylsilylamide anion, the tetracoordinate nitrogen atoms show rather long Mg-N bond lengths of 210.7 pm (average value).     

Substitution reactions of trans-[PdXPh(SbPh3)2J (X=Cl or Br) with nitrogen,phosphines and arsenic donor ligands. Crystal structures of trans-[PdClPh(PPh3)2], [PdClPh(bipy)], [PdClPh(dppm)]2, and [PdBrPh(dppm)]2

Exchange reactions of trans-[PdXPh(SbPh₃)₂] (1) (X=Cl or Br) with ligands L in refluxing dichloromethane give the palladium phenyl complexes [PdXPhL₂] (X=Cl, L=PPh₃, AsPh₃, L₂=2,2′-bipyridine (bipy), 4,4′-dimethyl-2,2′-bipyridine (dmbipy), 1,10-phenanthroline (phen); X=Br, L=PPh₃, L₂=bipy). Treatment of the complexes with bis(diphenylphosphino)methane (dppm) in refluxing dichloromethane gives [PdXPh(dppm]₂. These complexes have been characterised by microanalysis, IR and ¹H NMR spectroscopic data together with single crystal X-ray determinations of the phenyl palladium complexes, trans-[PdClPh(PPh₃)₂], [PdClPh(bipy)], [PdClPh(dppm)]₂, and [PdBrPh(dppm)]₂.     

Dimorphism of a new CuI coordination polymer:synthesis,crystal structures and properties of catena[CuI(2-iodopyrazine-N)] and poly[CuI(mu2-2-iodopyrazine-N,N')

Two modifications of the new copper(I) iodide coordination polymer CuI(2-iodopyrazine) were obtained by the reaction of CuI and 2-iodopyrazine in acetonitrile. During this reaction, intensely yellow crystals of form I appear first which transform within several minutes to intensely red crystals of form II which is the thermodynamically most stable form at room temperature. In catena[CuI(2-iodopyrazine-N)] (form I; a = 4.1830 (6) A; b = 10.814 (1) A; c = 17.961 (4) A; V = 812.5 (2) A(3); orthorhombic; P2(1)2(1)2(1); Z = 4), corrugated CuI double chains are found in which each copper atom is coordinated by one additional 2-iodopyrazine ligand. In poly[CuI(mu-2-iodopyrazine-N,N')] (form II; a = 4.2679 (5) A; b = 13.942 (2) A; c = 13.017 (2) A; b = 92.64 (1) degrees; V = 773.76 (2) A(3); monoclinic; P2(1)/c; Z = 4), CuI single chains occur which are connected via mu-N,N' coordination by the 2-iodopyrazine ligands to layers parallel to (010). The thermal behavior of both forms was investigated using simultaneous differential thermoanalysis, thermogravimetry, and mass spectrometry as well as differential scanning calorimetry and temperature resolved X-ray powder diffraction. On heating, both forms decompose to copper(I) iodide, and the decomposition temperature of form I is significantly lower than that of form II. From all experiments, there is no indication of a phase transition of one form into the other or for the formation of a phase with lower amine content.     

Grafting of [Mn(CH2tBu)2(tmeda)] on silica and comparison with its reaction with a silsesquioxane

The reaction of [Mn(CH2tBu)2(tmeda)] (1) and a silica partially dehydroxylated at 700 degrees C (SiO(2/700)) yields a single surface species [([triple bond]SiO)Mn(CH2tBu)(tmeda)] (2a; tmeda = tetramethylethylendiamine), while a mixture of 2a and [([triple bond]SiO)2Mn(tmeda)] (2b) is obtained by using SiO(2/200), SiO(2/300), or SiO(2/500) as evidenced by mass balance analysis, and IR and EPR spectroscopy. The reaction of 1 and (c-C5H9)7Si7O12SiOH (3), a soluble silanol that is a molecular model for a silica support, generates the bis-siloxy complex 4, [[(c-C5H9)7Si7O12SiO]2Mn(tmeda)2], in a quantitative yield; compound 4 was characterized by single-crystal X-ray diffraction. These reactions exemplify the limitation of considering molecular silanol derivatives as straightforward and reliable homogeneous models for silica, and address the need for thorough characterization of surface species by the use of surface-science techniques. These studies show the possibility of preparing coordinatively and geometrically unique surface species that would be difficult to prepare by solution chemistry methods; insights into the chemical and physical properties of these surface species are also gained.     

Reactions of triosmium clusters with organic azides; x-ray crystal structures of [Os3(CO)10(NCMe)(N3COPh)], [Os3(μ-H)(CO)10(HN3Ph)], and [Os3(μ-H)2(CO)9(μ3-NPh)]

Organic azides [N₃R] react with [Os₃(CO)₁₁(NCMe)] and with [Os₃(μ-H)₂(CO)₁₀] to form [Os₃(CO)₁₀(NCMe)(N₃COR)] (R  Ph) and [Os₃(μ-H)(CO)₁₀(HN₃R)] (R  Ph, n-Bu, CH₂Ph, cyclo-C₆H₁₁), respectively; the latter may be converted to [Os₃(μ-H)₂(CO)₉(μ₃-NR)] by thermolysis; the molecular structure of the phenyl derivative of each class of compound has been confirmed by x-ray analysis.     

配合物[UO2(PMBP)2(DMDBU)]的合成和晶体结构

1-苯基-3-甲基-4-苯甲酰基-吡唑啉酮-5(HPMBP)是一类含有氮杂环的β-二酮螯合剂,现在已经广泛应用于金属离子的分离和分析[1-4]。最近我们采用取代脲N,N-二甲基-N,N-二苯基脲(DMDBU)和N,N-二乙基-N,N-二苯基脲(DED-BU)应用于铀(VI)和钍(IV)萃取研究,并合成和测定了配合物[UO2(D     

Synthesis,crystal structures,and properties of copper(II) dicarboxylate complexes with [bis(2-pyridylcarbonyl)amido]

Four new complexes, [Cu₂(Bpca)₂(L¹)(H₂O)₂] · 3H₂O (I), [Cu₂(Bpca)₂(L²)(H₂O)₂] (II), [Cu₂(Bpca)₂(L³)] · 2H₂O (III), [Cu₂(Bpca)₂(L¹)(H₂O)] · 2H₂O (IV) (Bpca = bis(2-pyridylcarbonyl)amido, H₂L¹ = glutaric acid, H₂L² = adipic acid, H₂L³ = suberic acid, H₂L⁴ = azelaic acid) have been synthesized and characterized by single-crystal X-ray diffraction methods (CIF files CCDC nos. 1432836 (I), 1432835 (II), 817411 (III), and 817412 (IV)), elemental analyses, IR spectra. Structural analyses reveal that compounds I, II, and IV have similar structures [Cu(Bpca)]⁺ units bridged by dicarboxylate forming dinuclear units, whereas the dinuclear of compound III are edge-shared through two carboxylate oxygen atoms of different suberate anions. Hydrogen bonds are response for the supramolecular assembly of compounds I to IV. The temperature-dependent magnetic property of III was also investigated in the temperature range of 2 to 300 K, and the magnetic behaviour suggests weak antiferromagnetic coupling exchange.