Nickel dithiolenes revisited: structures and electron distribution from density functional theory for the three-member electron-transfer series [Ni(S2C2Me2)2]0,1-,2-

The complexes [Ni(S2C2Me2)2](z) (z = 0, 1-, 2-) have been isolated for the purpose of investigating their electronic structures in a reversible three-member electron-transfer series. Members are interrelated by reversible redox reactions with E(1/2)(0/1-) = -0.15 V and E(1/2)(1-/2-) = -1.05 V versus SCE in acetonitrile. The three complexes have nearly planar structures of idealized D(2)(h) symmetry. As the series is traversed in the reducing direction, Ni-S and C-S bond lengths increase; the chelate ring C-C bond length decreases from the neutral complex to the monoanion and does not change significantly in the dianion. Structural trends are compared with previous results for [Ni(S2C2R2)2)](1-,2-). Following the geometrical changes, values of nu(Ni)(-)(S) and nu(C)(-)(S) decrease, while the value of nu(C)(-)(C) increases with increased reduction. Geometry optimizations at the density functional theory (DFT) level were performed for all members of the series. Geometrical parameters obtained from the calculations are in good agreement with the experimental findings. The 5b(2g) orbital was identified as the LUMO in [Ni(S2C2Me2)2], the SOMO in [Ni(S2C2Me2)2](1-), and the HOMO in [Ni(S2C2Me2)2]2-. Unlike in the situation in the [M(CO)2-(S2C2Me2)2]z series (M = Mo, W; z = 0, 1-, 2-), the apparent contribution from the metal d orbital in the electroactive orbital is not constant. In the present series, the d(xz) contribution increases from 13 to 20 to 39% upon passing from the neutral to the monoanionic to the dianionic complex. Accurate calculation of EPR g-values of [Ni(S2C2Me2)2]1- by DFT serves as a test for the reliability of the electronic structure calculations.     

Binding Patterns in Single-Ligand Complexes of NH(3), H(2)O, OH(-), and F(-) with First Series Transition Metals

Single-ligand complexes of first series transition metals with ammonia, water, hydroxide, and fluoride, many known in the gas phase, have been studied in calculations covering the 20 mono- and divalent cations and some very unusual binding patterns have been found. Binding energies and binding geometries were calculated at MP2 level, using a basis with a (6d/4d) contraction in the metal d space and 6-311+G sets for the ligands. The results were used to distinguish the effect of steadily increasing nuclear charge across the series from the varying effects of d shell occupation. Even with only one ligand, the M(2+) adducts displayed the familiar ligand field effects, d shell repulsion in the expected d(delta) < d(pi) < d(sigma) order being superimposed on a regular progression to stronger binding and shorter bonds; that progression was disturbed only at the d(5) and d(10) positions, when the d(sigma) orbital was occupied. Monovalent metal adducts behaved in strikingly different fashion, with irregular changes across early and late series metals in both bond length and bond strength. The irregularities are only partly attributable to the presence of both d(n)()(-)(1)s and d(n)() ground states in the series. The other part of the explanation is the binding of anionic ligands inside the radial maximum of the 4s orbital. At these distances the normal binding preference shown by H(2)O and NH(3) for d(n)() over sd(n)()(-)(1) cations is reversed. In contrast to steeply rising binding energies across the divalent metal ion adducts, the trend lines for the monovalent series are flat, the increments in nuclear charge being insufficent to offset the extra repulsion of electrons added to the d shell.     

Periodic trends within a series of five-coordinate thiolate-ligated [MII(SMe2N4(tren))]+ (M = Mn, Fe, Co, Ni, Cu, Zn) complexes, including a rare example of a stable CuII-thiolate

A series of five-coordinate thiolate-ligated complexes [M(II)(tren)N4S(Me2)]+ (M = Mn, Fe, Co, Ni, Cu, Zn; tren = tris(2-aminoethyl)amine) are reported, and their structural, electronic, and magnetic properties are compared. Isolation of dimeric [Ni(II)(SN4(tren)-RS(dang))]2 ("dang"= dangling, uncoordinated thiolate supported by H bonds), using the less bulky [(tren)N4S](1-) ligand, pointed to the need for gem-dimethyls adjacent to the sulfur to sterically prevent dimerization. All of the gem-dimethyl derivatized complexes are monomeric and, with the exception of [Ni(II)(S(Me2)N4(tren)]+, are isostructural and adopt a tetragonally distorted trigonal bipyramidal geometry favored by ligand constraints. The nickel complex uniquely adopts an approximately ideal square pyramidal geometry and resembles the active site of Ni-superoxide dismutase (Ni-SOD). Even in coordinating solvents such as MeCN, only five-coordinate structures are observed. The MII-S thiolate bonds systematically decrease in length across the series (Mn-S > Fe-S > Co-S > Ni-S approximately Cu-S < Zn-S) with exceptions occurring upon the occupation of sigma* orbitals. The copper complex, [Cu(II)(S(Me2)N4(tren)]+, represents a rare example of a stable CuII-thiolate, and models the perturbed "green" copper site of nitrite reductase. In contrast to the intensely colored, low-spin Fe(III)-thiolates, the M(II)-thiolates described herein are colorless to moderately colored and high-spin (in cases where more than one spin-state is possible), reflecting the poorer energy match between the metal d- and sulfur orbitals upon reduction of the metal ion. As the d-orbitals drop in energy proceeding across the across the series M(2+) (M= Mn, Fe, Co, Ni, Cu), the sulfur-to-metal charge-transfer transition moves into the visible region, and the redox potentials cathodically shift. The reduced M(+1) oxidation state is only accessible with copper, and the more oxidized M(+4) oxidation state is only accessible for manganese.     

Bonding Trends Traversing the Tetravalent Actinide Series: Synthesis, Structural, and Computational Analysis of An(IV)((Ar)acnac)(4) Complexes (An = Th, U, Np, Pu; (Ar)acnac = ArNC(Ph)CHC(Ph)O; Ar = 3,5-(t)Bu(2)C(6)H(3))

A series of tetravalent An(IV) complexes with a bis-phenyl β-ketoiminate N,O donor ligand has been synthesized with the aim of identifying bonding trends and changes across the actinide series. The neutral molecules are homoleptic with the formula An((Ar)acnac)(4) (An = Th (1), U (2), Np (3), Pu (4); (Ar)acnac = ArNC(Ph)CHC(Ph)O; Ar = 3,5-(t)Bu(2)C(6)H(3)) and were synthesized through salt metathesis reactions with actinide chloride precursors. NMR and electronic absorption spectroscopy confirm the purity of all four new compounds and demonstrate stability in both solution and the solid state. The Th, U, and Pu complexes were structurally elucidated by single-crystal X-ray diffraction and shown to be isostructural in space group C2/c. Analysis of the bond lengths reveals shortening of the An-O and An-N distances arising from the actinide contraction upon moving from 1 to 2. The shortening is more pronounced upon moving from 2 to 4, and the steric constraints of the tetrakis complexes appear to prevent the enhanced U-O versus Pu-O orbital interactions previously observed in the comparison of UI(2)((Ar)acnac)(2) and PuI(2)((Ar)acnac)(2) bis-complexes. Computational analysis of models for 1, 2, and 4 (1a, 2a, and 4a, respectively) concludes that both the An-O and the An-N bonds are predominantly ionic for all three molecules, with the An-O bonds being slightly more covalent. Molecular orbital energy level diagrams indicate the largest 5f-ligand orbital mixing for 4a (Pu), but spatial overlap considerations do not lead to the conclusion that this implies significantly greater covalency in the Pu-ligand bonding. QTAIM bond critical point data suggest that both U-O/U-N and Pu-O/Pu-N are marginally more covalent than the Th analogues.     

Synthetic applications of (Me3SiNSN)2E (E = S, Se) in chalcogen-nitrogen chemistry: formation and structural characterization of Cl2TeESN2 (E = S, Se) and [PPh4]2[Pd2(mu-Se2N2S)X4] (X = Cl, Br)

The reaction of (Me3SiNSN)2S with TeCl4 in CH2Cl2 affords Cl2TeS2N2 (1) and that of (Me3SiNSN)2Se with TeCl4 produces Cl2TeSeSN2 (2) in good yields. The products were characterized by X-ray crystallography, as well as by NMR and vibrational spectroscopy and EI mass spectrometry. The Raman spectra were assigned by utilizing DFT molecular orbital calculations. The pathway of the formation of five-membered Cl2TeESN2 rings by the reactions of (Me3SiNSN)2E with TeCl4 (E = S, Se) is discussed. The reaction of (Me3SiNSN)2Se with [PPh4]2[Pd2X6] yields [PPh4]2[Pd2(mu-Se2N2S)X4] (X = Cl, 4a; Br, 4b), the first examples of complexes of the (Se2N2S)2- ligand. In both cases, this ligand bridges the two palladium centers through the selenium atoms.     

Oxo transfer reactions mediated by bis(dithiolene)tungsten analogues of the active sites of molybdoenzymes in the DMSO reductase family: comparative reactivity of tungsten and molybdenum.

The discovery of tungsten enzymes and molybdenum/tungsten isoenzymes, in which the mononuclear catalytic sites contain a metal chelated by one or two pterin-dithiolene cofactor ligands, has lent new significance to tungsten-dithiolene chemistry. Reaction of [W(CO)(2)(S(2)C(2)Me(2))(2)] with RO(-) affords a series of square pyramidal desoxo complexes [W(IV)(OR')(S(2)C(2)Me(2))(2)](1)(-), including R' = Ph (1) and Pr(i)() (3). Reaction of 1 and 3 with Me(3)NO gives the cis-octahedral complexes [W(VI)O(OR')(S(2)C(2)Me(2))(2)](1)(-), including R' = Ph (6) and Pr(i)() (8). These W(IV,VI) complexes are considered unconstrained versions of protein-bound sites of DMSOR and TMAOR (DMSOR = dimethylsulfoxide reductase, TMAOR = trimethylamine N-oxide reductase) members of the title enzyme family. The structure of 6 and the catalytic center of one DMSO reductase isoenzyme have similar overall stereochemistry and comparable bond lengths. The minimal oxo transfer reaction paradigm thought to apply to enzymes, W(IV) + XO --> W(VI)O + X, has been investigated. Direct oxo transfer was demonstrated by isotope transfer from Ph(2)Se(18)O. Complex 1 reacts cleanly and completely with various substrates XO to afford 6 and product X in second-order reactions with associative transition states. The substrate reactivity order with 1 is Me(3)NO > Ph(3)AsO > pyO (pyridine N-oxide) > R(2)SO > Ph(3)PO. For reaction of 3 with Me(3)NO, k(2) = 0.93 M(-)(1) s(-)(1), and for 1 with Me(2)SO, k(2) = 3.9 x 10(-)(5) M(-)(1) s(-)(1); other rate constants and activation parameters are reported. These results demonstrate that bis(dithiolene)W(IV) complexes are competent to reduce both N-oxides and S-oxides; DMSORs reduce both substrate types, but TMAORs are reported to reduce only N-oxides. Comparison of k(cat)/K(M) data for isoenzymes and k(2) values for isostructural analogue complexes reveals that catalytic and stoichiometric oxo transfer, respectively, from substrate to metal is faster with tungsten and from metal to substrate is faster with molybdenum. These results constitute a kinetic metal effect in direct oxo transfer reactions for analogue complexes and for isoenzymes provided the catalytic sites are isostructural. The nature of the transition state in oxo transfer reactions of analogues is tentatively considered. This research presents the first kinetics study of substrate reduction via oxo transfer mediated by bis(dithiolene)tungsten complexes.     

Tuning the excited-state properties of [M(SnR3)2(CO)2(alpha-diimine)] (M = Ru, Os; R = Me, Ph)

The influences of R, the alpha-diimine, and the transition metal M on the excited-state properties of the complexes [M(SnR3)2(CO)2(alpha-diimine)] (M = Ru, Os; R = Ph, Me) have been investigated. Various synthetic routes were used to prepare the complexes, which all possess an intense sigma-bond-to-ligand charge-transfer transition in the visible region between a sigma(Sn-M-Sn) and a pi*(alpha-diimine) orbital. The resonance Raman spectra show that many bonds are only weakly affected by this transition. The room-temperature time-resolved absorption spectra of [M(SnR3)2(CO)2(dmb)] (M = Ru, Os; R = Me, Ph; dmb = 4,4'-dimethyl-2,2'-bipyridine) show the absorptions of the radical anion of dmb, in line with the SBLCT character of the lowest excited state. The excited-state lifetimes at room temperature vary between 0.5 and 3.6 microseconds and are mainly determined by the photolability of the complexes. All complexes are photostable in a glass at 80 K, under which conditions they emit with very long lifetimes. The extremely long emission lifetimes (e.g., tau = 1.1 ms for [Ru(SnPh3)2(CO)2(dmb)]) are about a thousand times longer than those of the 3MLCT states of the [Ru(Cl)(Me)(CO)2(alpha-diimine)] complexes. This is due to the weak distortion of the former complexes in their 3SBLCT states as seen from the very small Stokes shifts. Remarkably, replacement of Ru by Os hardly influences the absorption and emission energies of these complexes; yet the emission lifetime is shortened because of an increase of spin-orbit coupling. The quantum yield of emission at 80 K is 1-5% for these complexes, which is lower than might be expected on the basis of their slow nonradiative decay.     

Combined experimental and computational studies on carbon-carbon reductive elimination from Bis(hydrocarbyl) complexes of (PCP)Ir

The reductive elimination of carbon-carbon bonds is one of the most fundamentally and synthetically important reaction steps in organometallic chemistry, yet relatively little is understood about the factors that govern the kinetics of this reaction. C-C elimination from complexes with the common d (6) six-coordinate configuration generally proceeds via prior ligand loss, which greatly complicates any attempt to directly measure the rates of the specific elimination step. We report the synthesis of a series of five-coordinate d (6) iridium complexes, ( (tBu)PCP)Ir(R)(R'), where R and R' are Me, Ph, and (phenyl-substituted) vinyl and alkynyl groups. For several of these complexes (R/R' = Ph/Vi, Me/Me, Me/Vi, Me/CCPh, and Vi/CCPh, where Vi = trans-CHCHPh) we have measured the absolute rate of C-C elimination. For R/R' = Ph/Ph, Ph/Me, and Ph/CCPh, we obtain upper limits to the elimination rate; and for R/R' = CCPh/CCPh, a lower limit. In general, the rates decrease (activation barriers increase) according to the following order: acetylide < vinyl approximately Me < Ph. Density functional theory (DFT) calculations offer significant insight into the factors behind this order, in particular the slow rates for elimination of the vinyl and, especially, phenyl complexes. The transition states are calculated to involve rotation of the aryl or vinyl group around the Ir-C bond, prior to C-C elimination, such that the group to which it couples can add to the face of the aryl or vinyl group. This rotation is severely hindered by the presence of the phosphino -t-butyl groups that lie above and below the plane of the aryl/vinyl group in the ground state. Accordingly, calculations predict dramatically different relative rates of elimination from the much less sterically hindered complexes ( (H)PCP)Ir(R)(R'). For example, the barrier to elimination from ( (H)PCP)Ir(Me) 2 is 20 kcal/mol, which is 2 kcal/mol greater than from the ( (tBu)PCP)Ir analogue. In contrast, the activation enthalpies calculated for vinyl-vinyl and phenyl-phenyl elimination from ( (H)PCP)Ir are remarkably low, only 2 and 9 kcal/mol, respectively; these values are 16 and 22 kcal/mol less than those of the corresponding ( (tBu)PCP)Ir complexes. Moreover, since these eliminations are very nearly thermoneutral, the barriers are calculated to be equally low for the reverse reactions [C-C oxidative addition to ( (H)PCP)Ir]. The absence of differences in intraligand CC bond lengths in the transition states relative to the ground states, combined with a comparison of calculated "face-on" and "planar" transition states for C-C coupling, suggests that the critical importance of the aryl/vinyl rotation is based on geometric or steric factors rather than electronic ones. Thus there is no evidence for participation of the pi or pi* orbitals of the aryl or vinyl groups in the formation of the C-C bond, although a small pi effect cannot be rigorously excluded. Likewise, the results do not support the hypothesis that the degree of directionality of the carbon-based orbital used for bonding to iridium (sp (3) > sp (2) > sp) plays an important role in this system in determining the barrier to reductive elimination.     

Electronic structure of square planar bis(benzene-1,2-dithiolato)metal complexes [M(L)(2)](z) (z = 2-, 1-, 0; M = Ni, Pd, Pt, Cu, Au): an experimental, density functional, and correlated ab initio study

The three diamagnetic square planar complexes of nickel(II), palladium(II), and platinum(II) containing two S,S-coordinated 3,5-di-tert-butylbenzene-1,2-dithiolate ligands, (L(Bu))(2-), namely [M(II)(L(Bu))(2)](2-), have been synthesized. The corresponding paramagnetic monoanions [M(II)(L(Bu))(L(Bu)(*))](-) (S = (1)/(2)) and the neutral diamagnetic species [M(II)(L(Bu)(*))(2)] (M = Ni, Pd, Pt) have also been generated in solution or in the solid state as [N(n-Bu)(4)][M(II)(L(Bu))(L(Bu)(*))] salts. The corresponding complex [Cu(III)(L(Bu))(2)](-) has also been investigated. The complexes have been studied by UV-vis, IR, and EPR spectroscopy and by X-ray crystallography; their electro- and magnetochemistry is reported. The electron-transfer series [M(L(Bu))(2)](2-,-,0) is shown to be ligand based involving formally one (L(Bu)(*))(-) pi radical in the monoanion or two in the neutral species [M(II)(L(Bu)(*))(2)] (M = Ni, Pd, Pt). Geometry optimizations using all-electron density functional theory with scalar relativistic corrections at the second-order Douglas-Kroll-Hess (DKH2) and zeroth-order regular approximation (ZORA) levels result in excellent agreement with the experimentally determined structures and electronic spectra. For the three neutral species a detailed analysis of the orbital structures reveals that the species may best be described as containing two strongly antiferromagnetically interacting ligand radicals. Furthermore, multiconfigurational ab initio calculations using the spectroscopy oriented configuration interaction (SORCI) approach including the ZORA correction were carried out. The calculations predict the position of the intervalence charge-transfer band well. Chemical trends in the diradical characters deduced from the multiconfigurational singlet ground-state wave function along a series of metals and ligands were discussed.     

9,10-Anthracene dicarboxylate bridged complexes with M2 quadruply bonded dimetal units: [[M2(O2CtBu)3]2(mu-9,10-An(CO2)2)], where M = Mo or W

From the reactions between [M2(O2CtBu)4] and 9,10-anthracenedicarboxylic acid in toluene, the dicarboxylate bridged complexes [[M2(O2CtBu)3]2(mu-9,10An(CO2)2)], have been obtained as microcrystalline yellow (M = Mo) and red (M = W) powders. The powders are soluble in THF forming intense red (M = Mo) and green (M = W) solutions. The electronic absorption spectra in 2-MeTHF have been recorded as a function of temperature (2-298 K) and show a small bathochromic shift on cooling. The electronic structures have been investigated by molecular orbital calculations employing density functional theory on the model compounds [(HCO2)3M2]2(mu-9,10-An(CO2)2) where the M4 unit is constrained to lie in a plane. These reveal a minimum energy, gas-phase structure wherein the plane of the anthracene is twisted by ca. 54 degrees with respect to its 9,10-carboxylate units for both Mo and W. The results of these calculations are correlated with the electronic absorption spectral data and the electrochemical measurements (CV and DPV) of the first and second oxidation waves. The EPR spectra of the radical cations formed by single-electron oxidation with [Cp2Fe](+)[PF6]- in a THF-CH2Cl2 solvent mixture show that the complexes are valence trapped at ambient temperature on the EPR timescale. These results are discussed in the light of recent studies of dicarboxylate-linked MM quadruple bonds.     

Synthesis and characterization of (smif)2M(n) (n = 0, M = V, Cr, Mn, Fe, Co, Ni, Ru; n = +1, M = Cr, Mn, Co, Rh, Ir; smif =1,3-di-(2-pyridyl)-2-azaallyl)

A series of Werner complexes featuring the tridentate ligand smif, that is, 1,3-di-(2-pyridyl)-2-azaallyl, have been prepared. Syntheses of (smif)(2)M (1-M; M = Cr, Fe) were accomplished via treatment of M(NSiMe(3))(2)(THF)(n) (M = Cr, n = 2; Fe, n = 1) with 2 equiv of (smif)H (1,3-di-(2-pyridyl)-2-azapropene); ortho-methylated ((o)Mesmif)(2)Fe (2-Fe) and ((o)Me(2)smif)(2)Fe (3-Fe) were similarly prepared. Metatheses of MX(2) variants with 2 equiv of Li(smif) or Na(smif) generated 1-M (M = Cr, Mn, Fe, Co, Ni, Zn, Ru). Metathesis of VCl(3)(THF)(3) with 2 Li(smif) with a reducing equiv of Na/Hg present afforded 1-V, while 2 Na(smif) and IrCl(3)(THF)(3) in the presence of NaBPh(4) gave [(smif)(2)Ir]BPh(4) (1(+)-Ir). Electrochemical experiments led to the oxidation of 1-M (M = Cr, Mn, Co) by AgOTf to produce [(smif)(2)M]OTf (1(+)-M), and treatment of Rh(2)(O(2)CCF(3))(4) with 4 equiv Na(smif) and 2 AgOTf gave 1(+)-Rh. Characterizations by NMR, EPR, and UV-vis spectroscopies, SQUID magnetometry, X-ray crystallography, and DFT calculations are presented. Intraligand (IL) transitions derived from promotion of electrons from the unique CNC(nb) (nonbonding) orbitals of the smif backbone to ligand π*-type orbitals are intense (ε ≈ 10,000-60,000 M(-1)cm(-1)), dominate the UV-visible spectra, and give crystals a metallic-looking appearance. High energy K-edge spectroscopy was used to show that the smif in 1-Cr is redox noninnocent, and its electron configuration is best described as (smif(-))(smif(2-))Cr(III); an unusual S = 1 EPR spectrum (X-band) was obtained for 1-Cr.     

Photoelectron spectroscopy of the doubly-charged anions [MIVO(mnt)2]2- (M = Mo, W; mnt = S2C2(CN)2(2-): access to the ground and excited states of the [MVO(mnt)2]- anion

Photodetachment photoelectron spectroscopy was used to investigate the electronic structure of the doubly charged complexes [MIVO(mnt)2]2- (M = Mo, W; mnt = 1,2-dicyanoethenedithiolato). These dianions are stable in the gas phase and are minimal models for the active sites of the dimethyl sulfoxide reductase family of molybdenum enzymes and of related tungsten enzymes. Adiabatic and vertical electron binding energies for both species were measured, providing detailed information about molecular orbital energy levels of the parent dianions as well as the ground and excited states of the product anions [MVO(mnt)2]-. Density functional theory calculations were used to assist assignment of the detachment features. Differences in energy between these features provided the energies of ligand-to-metal charge-transfer transitions from S(pi) and S(sigma) molecular orbitals to the singly occupied metal-based orbital of the products [MVO(mnt)2]-. These unique data for the M(V) species were obtained at the C(2)(v)() geometry of the parent M(IV) dianions. However, theoretical calculations and available condensed phase data suggested that a geometry featuring differentially folded dithiolene ligands (Cs point symmetry) was slightly lower in energy. The driving force for ligand folding is a favorable covalent interaction between the singly occupied metal-based molecular orbital (a1 in C2v) point symmetry; highest occupied molecular orbital (HOMO)) and the least stable of the occupied sulfur-based molecular orbitals (b1 in C2v point symmetry, HOMO-1) that is only possible upon reduction to the lower symmetry. This ligand folding induces a large increase in the intensity predicted for the a' S(pi) --> a' dx2 - y2 charge-transfer transition originating from the HOMO-2 of [MVO(mnt)2](-) under Cs point symmetry. Electronic absorption spectra are available for the related species [MoVO(bdt)2]- (bdt = 1,2-benzenedithiolato) and for the oxidized form of dimethyl sulfoxide reductase. The intense absorptions at approximately 1.7 eV have been assigned previously to S(sigma) --> Mo transitions, assuming C2v geometry. The present work indicates that the alternative a' S(pi) --> a' dx2 - y2 of Cs geometry must be considered. Overall, this study confirms that the electronic structure of the M-dithiolene units are exquisitely sensitive to dithiolene ligand folding, reinforcing the proposal that these units are tunable conduits for electron transfer in enzyme systems.     

The first homologous series of self-assembled aryl bromo- and aryl cyanocuprates, -argentates,and -aurates; MLi(2)XAr(2) (M = Cu(I), Ag(I), Au(I); X = Br,C(triple bond)N; Ar = [C(6)H(4)CH(2)N(Et)CH(2)CH(2)NEt(2)-2]-)

Reaction of 2 molar equiv of the diamine chelated aryllithium dimers Li(2)(C(6)H(4)[CH(2)N(Et)CH(2)CH(2)NEt(2)]-2)(2) (Li(2)Ar(2)) with the appropriate metal bromide allows the synthesis of the first homologous series of monomeric group 11 bromoate complexes of type MLi(2)BrAr(2) (M = Cu (7), Ag (8), Au (9)). Both in the solid state and in solution, the bromocuprate 7 is isostructural with the bromoargentate 8. The crystal structures of 7 and 8 consist of a MLi(2) core, and each of the two aryl ligands bridges via electron-deficient bonding between the group 11 metal and one Li atom (d(C(ipso)-M) = 1.941(4) (mean) and 2.122(4) (mean) A, for 7 and 8, respectively). The bromine atom exclusively bridges between the two lithium atoms. Each of the ortho-CH(2)N(Et)CH(2)CH(2)NEt(2) moieties is N,N'-chelate bonded to one lithium (d(N-Li) = 2.195(5) and 2.182(0) (mean) A for 7 and 2.154(8) and 2.220(1) (mean) A for 8). Although the MLi(2)BrAr(2) compounds are neutral higher-order -ate species, the structure can also be regarded as consisting of a contact ion pair consisting of two ionic fragments, [Li-Br-Li](+) and [Ar(2)M](-), which are interconnected by both Li-N,N'-chelate bonding and a highly polar C(ipso)-Li interaction. On the basis of NMR and cryoscopic studies, the structural features of the bromoaurate 9 are similar to those of 7 and 8. A multinuclear NMR investigation shows that the bonding between the [Li-Br-Li] and [Ar(2)M] moieties is intermediate between ionic and neutral with an almost equally polarized C(ipso)-Li bond in 7, 8, and 9. Similar reactions between M(C(triple bond)N) and 2 molar equiv of LiAr yield the analogous 2:1 cyanoate complexes of type MLi(2)(C(triple bond)N)Ar(2) (M = Ag (10), Au (11)). Multinuclear NMR studies show that the cyanoate complexes 10 and 11 are isostructural with the bromoate complexes 7, 8, and 9. This paper illustrates that these cyanoaurates may serve as excellent model complexes to gain more insight into the structure of 2:1 cyanocuprates in solution.     

Nucleophilic reactivity and oxo/sulfido substitution reactions of MVIO3 Groups (M = Mo, W)

The nucleophilic reactivity of oxo ligands in the groups M(VI)O(3) in the trigonal complexes [(Me(3)tacn)MO(3)] (M = Mo (1), W (10)) and [(Bu(t)(3)tach)MO(3)] (M = Mo (5), W (14)) has been investigated. Complexes 1/10 can be alkylated with MeOTf to give [(Me(3)tacn)MO(2)(OMe)](1+) (2/11), silylated with Pr(i)(3)SiOTf to form [(Me(3)tacn)MO(2)(OSiPr(i)(3))](+) (3/12), and protonated with HOTf to yield [(Me(3)tacn)MoO(2)(OH)](+) (4). Similarly, complexes 5/14 can be silylated to [(Bu(t)(3)tach)MO(2)(OSiPr(i)(3))](+) (6/15) and protonated to [(Bu(t)(3)tach)MO(2)(OH)](+) (7/16). Products were isolated as triflate salts in yields exceeding 70%. When excess acid was used, the dinuclear mu-oxo species [(Bu(t)(3)tach)(2)M(2)O(5)](2+) (8/17) were obtained. X-ray structures are reported for 2-4, 6-8, 12, and 15-17. All mononuclear complexes have dominant trigonal symmetry with a rhombic distortion owing to a M[bond]OR bond (R = Me, SiPr(i)(3), H), which is longer than M[double bond]O oxo interactions; the latter exert a substantial trans influence on M[bond]N bond lengths. Oxo ligands in 5/14 undergo replacement with sulfide. Lawesson's reagent effects formation of [(Bu(t)(3)tach)MS(3)] (9/18), 14 with excess B(2)S(3) yields incompletely substituted [(Bu(t)(3)tach)WOS(2)] (20), and 5 with excess B(2)S(3) yields [(Bu(t)(3)tach)Mo(IV)O(S(4))] (19). The structures of 9, 19, and 20 are reported. Precedents for M(VI)S(3) groups in five- and six-coordinate molecules are limited. This investigation is the first detailed study of the behavior of M(VI)O(3) groups in nucleophilic and oxo/sulfido substitution reactions and should be useful in synthetic approaches to the active sites of the xanthine oxidase enzyme family and of certain tungstoenzymes. (Bu(t)(3)tach = 1,3,5-tri-tert-butyl-1,3,5-triazacyclohexane, Me(3)tacn = 1,4,7-trimethyl-1,4,7-triazacyclonane; OTf = triflate).     

The molecular structure of the tris(2-mercapto-1-tolylimidazolyl)hydroborato zinc(2-mercapto-1-tolylimidazole) complex, [[Tm(p-Tol)]Zn(mim(p-Tol))][ClO4]: intermolecular N-H...OClO3versus intramolecular N-H...S hydrogen bonding interactions of the mercaptoimidazole ligand

The molecular structure of the tris(2-mercapto-1-tolylimidazolyl)hydroborato complex [[Tm(p-Tol)]Zn(mim(p-Tol))][ClO(4)].3MeCN has been determined by X-ray diffraction, thereby demonstrating that the mim(p-Tol) ligand exhibits a N-H...O hydrogen bond with the [ClO(4)](-) counterion, [[Tm(p-Tol)]Zn(mim(p-Tol))...(OClO(3))], rather than hydrogen bond with a sulfur of the [Tm(p-Tol)] ligand. DFT calculations on a series of related complexes, namely [[Tm(Me)]Zn(mim(Me))](+), [[Tm(Me)]Zn(mim(Me))]...(OClO(3))], [[Tm(Me)]Zn(mim(Me))]...[O(H)Me]](+), and [[Tm(Me)]Zn(mim(Me))]...(NCMe)](+) demonstrate that an intramolecular N-H...S hydrogen bond within [[Tm(Me)]Zn(mim(Me))](+) is also less favored than the corresponding hydrogen bonding interactions with MeCN, MeOH, and [ClO(4)](-). The inability of the sulfur atoms of [Tm(R)] ligand to act as an effective hydrogen bond acceptor is in marked contrast to the ability of sulfur atoms in thiolate ligands to participate in the formation of N-H...S hydrogen bonds, an observation that reflects the "thione"versus"thiolate" nature of the [Tm(R)] ligand.     

Syntheses, structures, physical properties, and electronic properties of some AMUQ3 compounds (A = alkali metal, M = Cu or Ag, Q = S or Se)

The seven new isostructural quaternary uranium chalcogenides KCuUS 3, RbCuUS 3, RbAgUS 3, CsCuUS 3, CsAgUS 3, RbAgUSe 3, and CsAgUSe 3 were prepared from solid-state reactions. These isostructural materials crystallize in the layered KZrCuS 3 structure type in the orthorhombic space group Cmcm. The structure is composed of UQ 6 octahedra and MQ 4 tetrahedra that share edges to form (2) infinity[UMQ 3 (-)] layers. These layers stack perpendicular to [010] and are separated by layers of face- and edge-sharing AQ 8 bicapped trigonal prisms. There are no Q-Q bonds in the structure, so the formal oxidation states of A/U/M/Q may be assigned as 1+/4+/1+/2-, respectively. CsCuUS 3 shows semiconducting behavior with thermal activation energy E a = 0.14 eV and sigma 298 = 0.3 S/cm. From single-crystal absorption measurements in the near IR range, the optical band gaps of these compounds are smaller than 0.73 eV. The more diffuse 5f electrons play a much more dominant role in the optical properties of the AMUQ 3 compounds than do the 4f electrons in the AMLnQ 3 compounds (Ln = rare earth). Periodic DFT spin band-structure calculations on CsCuUS 3 and CsAgUS 3 establish two energetically similar antiferromagnetic spin structures and show magnetic interactions within and between the layers of the structure. Density-of-states analysis shows M-Q orbital overlap in the valence band and U-Q orbital overlap in the conduction band.     

Amidinate-carboxylate complexes of dimolybdenum and ditungsten: M2(O2CR)2((NiPr)2CR')2. Preparations, molecular and electronic structures and reactions.

The compounds M(2)(O(2)CMe)(4) and the lithium amidinates Li[(N(i)Pr)(2)CR] react to give the new compounds trans-M(2)(O(2)CMe)(2)[(N(i)Pr)(2)CR](2) where M = Mo or W and R = Me (M = Mo only), -C[triple bond]C(t)Bu, -C[triple bond]CPh and -C[triple bond]C-Fc where Fc = 1-ferrocenyl. The limitations of this type of reaction are described based on steric considerations together with the preparation and characterization of the compound Mo(2)(micro-O(2)C-9-anthracene)(2)[eta(2)-(N(i)Pr)(2)CMe](2). The electronic structures of the bis-amidinate-bis-carboxylate M(2) complexes are described based on model compounds employing density functional theory and are correlated with the experimental observations of their physicochemical properties and in particular their observed electronic absorption spectra which show intense MLCT absorption bands. Preliminary studies of the reactions of these bis-amidinate-bis-carboxylate complexes in the preparation of 1-D oligomers are also described along with the preparation and molecular structures of the compounds [Li(N(i)Pr)(2)CR.THF](2) where R = 2-thienyl or -C[triple bond]C-Ph. The kinetic lability of these new M(2)-containing compounds toward ligand exchange is also noted.     

Preparation and characterization of Cr(III), Mn(II), Fe(II), Co(II) and Ni(II) complexes of a hexaazadithiophenolate macrocycle

The ligating properties of the 24-membered macrocyclic dinucleating hexaazadithiophenolate ligand (L(Me))2- towards the transition metal ions Cr(II), Mn(II), Fe(II), Co(II), Ni(II) and Zn(II) have been examined. It is demonstrated that this ligand forms an isostructural series of bioctahedral [(L(Me))M(II)2(OAc)]+ complexes with Mn(II) (2), Fe(II) (3), Co(II) (4), Ni(II) (5) and Zn(II) (6). The reaction of (L(Me))2- with two equivalents of CrCl2 and NaOAc followed by air-oxidation produced the complex [(L(Me))Cr(III)H2(OAc)]2+ (1), which is the first example for a mononuclear complex of (L(Me))2-. Complexes 2-6 contain a central N3M(II)(mu-SR)2(mu-OAc)M(II)N3 core with an exogenous acetate bridge. The Cr(III) ion in is bonded to three N and two S atoms of (L(Me))2- and an O atom of a monodentate acetate coligand. In 2-6 there is a consistent decrease in the deviations of the bond angles from the ideal octahedral values such that the coordination polyhedra in the dinickel complex 5 are more regular than in the dimanganese compound 2. The temperature dependent magnetic susceptibility measurements reveal the magnetic exchange interactions in the [(L(Me))M(II)2(OAc)]+ cations to be relatively weak. Intramolecular antiferromagnetic exchange interactions are present in the Mn(II)2, Fe(II)2 and Co(II)2 complexes where J = -5.1, -10.6 and approximately -2.0 cm(-1) (H = -2JS1S2). In contrast, in the dinickel complex 5 a ferromagnetic exchange interaction is present with J = +6.4 cm(-1). An explanation for this difference is qualitatively discussed in terms of the bonding differences.     

Electronic structure of [(CpCr)[(CO)3M]]mu-Cot (M = Cr, Fe): a theoretical study

The electronic structure of two cyclooctatetraene-bridged dinuclear first-row transition metal complexes of the type [(CpM)[(CO)3M']]mu-Cot (M = Cr; M' = Fe (1), Cr (2)) was investigated by complete active space self-consistent field (CASSCF) calculations. In this context the differences in the binding capabilities of the complex fragments CpM and (CO)3M are discussed on the basis of extended Huckel molecular orbital (MO) calculations. The geometries used for the CASSCF calculations for complex 1 were obtained from the crystal structure. For 2 a model structure was established by geometry optimization using density functional methods. The CASSCF results agree well with the experimental findings and provide insight into the binding situation of the two compounds. Complex 1 can be regarded as being composed of a chromocene-like subunit CpCr(eta5-C5H5) and the fragment (CO)3Fe(eta3-C3H3). A direct metal-metal bond is found, involving one initially singly occupied orbital of each fragment, leading to a doublet ground state for 1 with the remaining unpaired electron localized at the chromium center. For 2 no such direct metal-metal bond can be recognized. A very weak direct metal-metal interaction is induced by electron donation from the Cot2- ligand into a formally unoccupied metal-metal binding orbital combination. In the quartet ground state all three unpaired electrons are localized at the chromium center of the formally doubly positive charged CpCr unit, on which complex fragment [(CO)3Cr(eta5-Cot)]2- acts like a cyclopentadienyl ligand. The coordination sphere of the chromium center of the CpCr unit resembles that of a metallocene metal center and its metal 3d occupation scheme corresponds to that of vanadocene.     

New metal-organic polygons involving MM quadruple bonds: M8(O2CtBu)4(mu-SC4H2-3,4-{CO2}2)6 (M=Mo, W)

The reactions between M2(O2CtBu)4, where M=Mo or W, and thienyl-3,4-dicarboxylic acid (0.5-1.5 equiv) in toluene proceed via a series of detectable intermediates to the compounds M8(O2CtBu)4(mu-SC4H2-3,4-{CO2}2)6, which are isolated as air-sensitive yellow (M=Mo) or red (M=W) powders and show parent molecular ions in their mass spectra (MALDI). The structure of the molybdenum complex was determined by single-crystal X-ray crystallography and shown to contain an unusual M8 polygon involving four Mo2 quadruply bonded units linked via the agency of the six 3,4-thienylcarboxylate groups. The structure has crystallographically imposed S4 symmetry and may be described in terms of a highly distorted tetrahedron of Mo2 units or a bisphenoid in which two Mo2 units are linked by a thienyldicarboxylate such that intramolecular Mo2...O bonding is present, while the other thienylcarboxylate bridges merely serve to link these two [Mo2]...[Mo2] units together. The color of the compounds arises from intense M2 delta-to-thienyl pi transitions and, in THF, the complexes are redox-active and show four successive quasi-reversible oxidation waves. The [M8]+ radical cations, generated by one-electron oxidation with AgPF6, are shown to be valence-trapped (class II) by UV-vis-near-IR and electron paramagnetic resonance spectroscopy. These results are supported by the electronic structure calculations on model compounds M8(O2CH)4(mu-SC4H2-3,4-{CO}2)6 employing density functional theory that reveal only a small splitting of the M2 delta manifold via mixing with the 3,4-thienylcarboxylate pi system.