Influence of cholesterol on the phase transition of lipid bilayers: a temperature-controlled force spectroscopy study

Cholesterol (Chol) plays the essential function of regulating the physical properties of the cell membrane by controlling the lipid organization and phase behavior and, thus, managing the membrane fluidity and its mechanical strength. Here, we explore the model system DPPC:Chol by means of temperature-controlled atomic force microscopy (AFM) imaging and AFM-based force spectroscopy (AFM-FS) to assess the influence of Chol on the membrane ordering and stability. We analyze the system in a representative range of compositions up to 50 mol % Chol studying the phase evolution upon temperature increase (from room temperature to temperatures high above the T(m) of the DPPC bilayer) and the corresponding (nano)mechanical stability. By this means, we correlate the mechanical behavior and composition with the lateral order of each phase present in the bilayers. We prove that low Chol contents lead to a phase-segregated system, whereas high contents of Chol can give a homogeneous bilayer. In both cases, Chol enhances the mechanical stability of the membrane, and an extraordinarily stable system is observed for equimolar fractions (50 mol % Chol). In addition, even when no thermal transition is detected by the traditional bulk analysis techniques for liposomes with high Chol content (40 and 50 mol %), we demonstrate that temperature-controlled AFM-FS is capable of identifying a thermal transition for the supported lipid bilayers. Finally, our results validate the AFM-FS technique as an ideal platform to differentiate phase coexistence and transitions in lipid bilayers and bridge the gap between the results obtained by traditional methods for bulk analysis, the theoretical predictions, and the behavior of these systems at the nanoscale.     

Modulating membrane properties: the effect of trehalose and cholesterol on a phospholipid bilayer

The protective properties of trehalose on cholesterol-containing lipid dipalmitoylphosphatidylcholine (DPPC) bilayers are studied through molecular simulations. The ability of the disaccharide to interact with the phospholipid headgroups and stabilize the membrane persists even at high cholesterol concentrations and restricts some of the changes to the structure that would otherwise be imposed by cholesterol molecules. Predictions of bilayer properties such as area per lipid, tail ordering, and chain conformation support the notion that the disaccharide decreases the main melting transition in these multicomponent model membranes, which correspond more closely to common biological systems than pure bilayers. Molecular simulations indicate that the membrane dynamics are slowed considerably by the presence of trehalose, indicating that high sugar concentrations would serve to avert possible phase separations that could arise in mixed phospholipid systems. Various time correlation functions suggest that the character of the modifications in lipid dynamics induced by trehalose and cholesterol is different in the hydrophilic and hydrophobic regions of the membrane.     

Monte Carlo study of lipid membranes: Simulation of diparmitoylphosphatidylcholine bilayers in gel and liquid-crystalline phases

The statistical properties of the bilayer membranes of diparmitoylphosphatidylcholine (DPPC) in the gel and liquid-crystal phases were studied by Monte Carlo (MC) simulation using potential functions of the Lennard-Jones, the simple Coulomb, and the bond torsion. The simulation was undertaken on a two-dimensional periodic condition imposed on the bilayer model consisting of faithfully described molecules. The structure and ordering of the model bilayers accorded well with experiments, and the segment order parameters were in agreement with those of the nuclear magnetic resonance (NMR) experiments. The two kinds of lipid chains of DPPC do not equivalently behave in the bilayers, and chain 2 has lower ordering than chain 1. The order parameters of the first eight segments of chain 2 in the liquid-crystal model are particularly small and are roughly constant. From electron density analysis, it has been observed that the liquid-crystal bilayer has about one excess water molecule per one lipid molecule in comparison with the gel bilayer. The energy difference between the two bilayer models, taking account of the water contribution, is consistent with the latent heat of the phase transition. © 1995 by John Wiley & Sons, Inc.     

Interleaflet interaction and asymmetry in phase separated lipid bilayers: molecular dynamics simulations

In order to investigate experimentally inaccessible, molecular-level detail regarding interleaflet interaction in membranes, we have run an extensive series of coarse-grained molecular dynamics simulations of phase separated lipid bilayers. The simulations are motivated by differences in lipid and cholesterol composition in the inner and outer leaflets of biological membranes. Over the past several years, this phenomenon has inspired a series of experiments in model membrane systems which have explored the effects of lipid compositional asymmetry in the two leaflets. The simulations are directed at understanding one potential consequence of compositional asymmetry, that being regions of bilayers where liquid-ordered (L(o)) domains in one leaflet are opposite liquid-disordered (L(d)) domains in the other leaflet (phase asymmetry). The simulated bilayers are of two sorts: 1) Compositionally symmetric leaflets where each of the two leaflets contains an identical, phase separated (L(o)/L(d)) mixture of cholesterol, saturated and unsaturated phospholipid; and 2) Compositionally asymmetric leaflets, where one leaflet contains a phase separated (L(o)/L(d)) mixture while the other contains only unsaturated lipid, which on its own would be in the L(d) phase. In addition, we have run simulations where the lengths of the saturated lipid chains as well as the mole ratios of the three lipid components are varied. Collectively, we report on three types of interleaflet coupling within a bilayer. First, we show the effects of compositional asymmetry on acyl chain tilt and order, lipid rotational dynamics, and lateral diffusion in regions of leaflets that are opposite L(o) domains. Second, we show substantial effects of compositional asymmetry on local bilayer curvature, with the conclusion that phase separated leaflets resist curvature, while inducing large degrees of curvature in an opposing L(d) leaflet. Finally, in compositionally symmetric, phase separated bilayers, we find phase asymmetry (domain antiregistration) between the two leaflets occurs as a consequence of mismatched acyl chain-lengths in the saturated and unsaturated lipids.     

Design and synthesis of sphingomyelin-cholesterol conjugates and their formation of ordered membranes

A lipid raft is a cholesterol (Chol)-rich microdomain floating in a sea of lipid bilayers. Although Chol is thought to interact preferentially with sphingolipids such as sphingomyelin (SM), rather than with glycerophospholipids, the origin of the specific interaction has remained unresolved, primarily because of the high mobility of lipid molecules and weak intermolecular interactions. In this study, we synthesized SM-Chol conjugates with functionally designed linker portions to restrain Chol mobility and examined their formation of ordered membranes by a detergent insolubility assay, fluorescence anisotropy experiments, and fluorescence-quenching assay. In all of the tests, membranes prepared from the conjugates showed properties of ordered domains comparable to a SM-Chol (1:1) membrane. To gain insight into the structure of bilayers composed from the conjugates, we performed molecular dynamics simulations with 64 molecules of the conjugates, which suggested that the conjugates form a stable bilayer structure by bending at the linker portion and, mostly, reproduce the hydrogen bonds between the SM and Chol portions. These results imply that the molecular recognition between SM and Chol in an ordered domain is essentially reproduced by the conjugated molecules and, thus, demonstrates that these conjugate molecules could potentially serve as molecular probes for understanding molecular recognition in lipid rafts.     

A molecular-dynamics study of lipid bilayers: effects of the hydrocarbon chain length on permeability

In this paper, we investigate the effects of the hydrocarbon chain length of lipid molecules on the permeation process of small molecules through lipid bilayers. We perform molecular-dynamics simulations using three kinds of lipid molecules with different chain length: dilauroylphosphatidylcholine, dimyristoylphosphatidylcholine, and dipalmiltoylphosphatidylcholine. Free-energy profiles of O2, CO, NO, and water molecules are calculated by means of the cavity insertion Widom method and the probability ratio method. We show that the lipid membrane with longer chains has a larger and wider energy barrier. The local diffusion coefficients of water across the bilayers are also calculated by the force autocorrelation function method and the velocity autocorrelation function method. The local diffusion coefficients in the bilayers are not altered significantly by the chain length. We estimate the permeability coefficients of water across the three membranes according to the solubility-diffusion model; we find that the water permeability decreases modestly with increasing chain length of the lipid molecules.     

Molecular dynamics studies of the molecular structure and interactions of cholesterol superlattices and random domains in an unsaturated phosphatidylcholine bilayer membrane

The effect of the molecular organization of lipid components on the properties of the bilayer membrane has been a topic of increasing interest. Several experimental and theoretical studies have suggested that cholesterol is not randomly distributed in the fluid-state lipid bilayer but forms nanoscale domains. Several cholesterol-enriched nanodomain structures have been proposed, including rafts, regular or maze arrays, complexes, and superlattices. At present, the molecular mechanisms by which lipid composition influences the formation and stability of lipid nanodomains remain unclear. In this study, we have used molecular dynamics (MD) simulations to investigate the effects of the molecular organization of cholesterol--superlattice versus random--on the structure of and interactions between lipids and water in lipid bilayers of cholesterol and 1-palmitoyl-2-oleoylphosphatidylcholine (cholesterol/POPC) at a fixed cholesterol mole fraction of 0.40. On the basis of four independent replicates of 200-ns MD simulations for a superlattice or random bilayer, statistically significant differences were observed in the lipid structural parameters, area per lipid, density profile, and acyl chain order profile, as well as the hydrogen bonding between various pairs (POPC and water, cholesterol and water, and POPC and cholesterol). The time evolution of the radial distribution of the cholesterol hydroxy oxygen suggests that the lateral distribution of cholesterol in the superlattice bilayer is more stable than that in the random bilayer. Furthermore, the results indicate that a relatively long simulation time, more than 100 ns, is required for these two-component bilayers to reach equilibrium and that this time is influenced by the initial lateral distribution of lipid components.     

Structure and dynamics of water at the interface with phospholipid bilayers

We have performed two molecular-dynamics simulations to study the structural and dynamical properties of water at the interface with phospholipid bilayers. In one of the simulations the bilayer contained neutral phospholipid molecules, dioleoylphosphatidylcholine (DOPC); in the second simulation the bilayer contained charged lipid molecules, dioleoylphosphatidylserine (DOPS). From the density profile of water we observe that water next to the DOPS bilayer is more perturbed as compared to water near the DOPC bilayer. Using an energetic criterion for the determination of hydrogen bonding we find that water molecules create strong hydrogen bonds with the headgroups of the phospholipid molecules. Due to the presence of these bonds and also due to the confinement of water, the translational and orientational dynamics of water at the interface are slowed down. The degree of slowing down of the dynamics depends upon the location of water molecules near a lipid headgroup.     

Equilibrium distributions of dipalmitoyl phosphatidylcholine and dilauroyl phosphatidylcholine in a mixed lipid bilayer: atomistic semigrand canonical ensemble simulations

Conventional molecular dynamics (MD) simulations are seriously limited by the slow rate of diffusive mixing in their ability to predict lateral distributions of different lipid types within mixed-lipid bilayers using atomistic models. A method to overcome this limitation, using configuration-bias Monte Carlo (MC) "mutation" moves to transform lipids from one type to another in dynamic equilibrium, is demonstrated in binary fluid-phase mixtures of lipids whose tails differ in length by four carbons. The hybrid MC-MD method operates within a semigrand canonical ensemble, so that an equilibrium composition of the mixture is determined by a constant difference in chemical potential (Delta(mu)) chosen for the components. Within several nanoseconds, bilayer structures initiated as pure dipalmitoyl phosphatidylcholine (DPPC) or pure dilauroyl phosphatidylcholine (DLPC) converge to a common composition and structure in independent simulations conducted at the same Delta(mu). Trends in bilayer thickness, area per lipid, density distributions across the bilayer, and order parameters have been investigated at three mixture compositions and compared with results from the pure bilayers at 323 K. The mixtures showed a moderate increase in DPPC acyl tail sites crossing the bilayer midplane relative to pure DPPC. Correlations between lateral positions of the two lipid types within or across the bilayer were found to be weak or absent. While the lateral distribution is consistent with nearly ideal mixing, the dependence of composition on Delta(mu) indicates a positive excess free energy of mixing.     

Micropatterned composite membranes of polymerized and fluid lipid bilayers

Micropatterned composite membranes of polymerized and fluid lipid bilayers were constructed on solid substrates. Lithographic photopolymerization of a diacetylene-containing phospholipid, 1,2-bis(10,12-tricosadiynoyl)-sn-glycero-3-phosphocholine (DiynePC), and subsequent removal of nonreacted monomers by a detergent solution (0.1 M sodium dodecyl sulfate (SDS)) yielded a patterned polymeric bilayer matrix on the substrate. Fluid lipid bilayers of phosphatidylcholine from egg yolk (egg-PC) were incorporated into the lipid-free wells surrounded by the polymeric bilayers through the process of fusion and reorganization of suspended small unilamellar vesicles. Spatial distribution of the fluid bilayers in the patterned bilayer depended on the degree of photopolymerization that in turn could be modulated by varying the applied UV irradiation dose. The polymeric bilayer domains blocked lateral diffusion of the fluid lipid bilayers and confined them in the defined areas (corrals), if the polymerization was conducted with a sufficiently large UV dose. On the other hand, lipid molecules of the fluid bilayers penetrated into the polymeric bilayer domains, if the UV dose was relatively small. A direct correlation was observed between the applied UV dose and the lateral diffusion coefficient of fluorescent marker molecules in the fluid bilayers embedded within the polymeric bilayer domains. Artificial control of lateral diffusion by polymeric bilayers may lead to the creation of complex and versatile biomimetic model membrane arrays.     

Nonintercalating nanosubstrates create asymmetry between bilayer leaflets

The physical properties of lipid bilayers can be remodeled by a variety of environmental factors. Here we investigate using molecular dynamics simulations the specific effects of nanoscopic substrates or external contact points on lipid membranes. We expose palmitoyl-oleoyl phosphatidylcholine bilayers unilaterally and separately to various model nanosized substrates differing in surface hydroxyl densities. We find that a surface hydroxyl density as low as 10% is sufficient to keep the bilayer juxtaposed to the substrate. The bilayer interacts with the substrate indirectly through multiple layers of water molecules; however, despite such buffered interaction, the bilayers exhibit certain properties different from unsupported bilayers. The substrates modify transverse lipid fluctuations, charge density profiles, and lipid diffusion rates, although differently in the two leaflets, which creates an asymmetry between bilayer leaflets. Other properties that include lipid cross-sectional areas, component volumes, and order parameters are minimally affected. The extent of asymmetry that we observe between bilayer leaflets is well beyond what has been reported for bilayers adsorbed on infinite solid supports. This is perhaps because the bilayers are much closer to our nanosized finite supports than to infinite solid supports, resulting in a stronger support-bilayer electrostatic coupling. The exposure of membranes to nanoscopic contact points, therefore, cannot be considered as a simple linear interpolation between unsupported membranes and membranes supported on infinite supports. In the biological context, this suggests that the exposure of membranes to nonintercalating proteins, such as those belonging to the cytoskeleton, should not always be considered as passive nonconsequential interactions.     

High pressure effect on phase transition behavior of lipid bilayers

Phase behavior of lipid bilayers at high pressure is critical to biological processes. Using coarse grained molecular dynamic simulations, we report critical characteristics of dipalmitoylphosphatidylcholine bilayers with applied high pressure, and also show their phase transition by cooling bilayer patches. Our results indicate that the phase transition temperature of dipalmitoylphosphatidylcholine bilayers obviously shifts with pressure increasing in the rate of 37 °C kbar(-1), which are in agreement with experimental data. Moreover, the main phase transition is revealed to be strongly dependent on lipid area. A critical lipid area of ~0.57 nm(2) is found on the main phase transition boundary. Similar structures of acyl chains lead to the same sensitivity of phase transition temperature of different lipids to the pressure. Based on the lateral density and pressure profiles, we also discuss the different effects on bilayer structure induced by high temperature and high pressure, e.g., increasing temperature induces higher degree of interdigitation of lipid tails and thinner bilayers, and increasing pressure maintains the degree of interdigitation and bilayer thickness.     

Asymmetry of lipid bilayers induced by monovalent salt: atomistic molecular-dynamics study

Interactions between salt ions and lipid components of biological membranes are essential for the structure, stability, and functions of the membranes. The specific ionic composition of aqueous buffers inside and outside of the cell is known to differ considerably. To model such a situation we perform atomistic molecular-dynamics (MD) simulations of a single-component phosphatidylcholine lipid bilayer which separates two aqueous reservoirs with and without NaCl salt. To implement the difference in electrolyte composition near two membrane sides, a double bilayer setup (i.e., two bilayers in a simulation box) is employed. It turns out that monovalent salt, being in contact with one leaflet only, induces a pronounced asymmetry in the structural, electrostatic, and dynamical properties of bilayer leaflets after 50 ns of MD simulations. Binding of sodium ions to the carbonyl region of the leaflet which is in contact with salt results in the formation of "Na-lipids" complexes and, correspondingly, reduces mobility of lipids of this leaflet. In turn, attractive interactions of chloride ions (mainly located in the aqueous phase close to the water-lipid interface) with choline lipid groups lead to a substantial (more vertical) reorientation of postphatidylcholine headgroups of the leaflet adjoined to salt. The difference in headgroup orientation on two sides of a bilayer, being coupled with salt-induced reorientation of water dipoles, leads to a notable asymmetry in the charge-density profiles and electrostatic potentials of bilayer constitutes of the two leaflets. Although the overall charge density of the bilayer is found to be almost insensitive to the presence of salt, a slight asymmetry in the charge distribution between the two bilayer leaflets results in a nonzero potential difference of about 85 mV between the two water phases. Thus, a transmembrane potential of the order of the membrane potential in a cell can arise without ionic charge imbalance between two aqueous compartments.     

Solvent-free simulations of fluid membrane bilayers

A molecular level model for lipid bilayers is presented. Lipids are represented by rigid, asymmetric, soft spherocylinders in implicit solvent. A simple three parameter potential between pairs of lipids gives rise to a rich assortment of phases including (but not limited to) micelles, fluid bilayers, and gel-like bilayers. Monte Carlo simulations have been carried out to verify self-assembly, characterize the phases corresponding to different potential parametrizations, and to quantify the physical properties associated with those parameter sets corresponding to fluid bilayer behavior. The studied fluid bilayers have compressibility moduli in agreement with experimental systems, but display bending moduli at least three times larger than typical biological membranes without cholesterol.     

Interaction of 3β-amino-5-cholestene with phospholipids in binary and ternary bilayer membranes

3β-Amino-5-cholestene (aminocholesterol) is a synthetic sterol whose properties in bilayer membranes have been examined. In fluid palmitoyl sphingomyelin (PSM) bilayers, aminocholesterol and cholesterol were equally effective in increasing acyl chain order, based on changes in diphenylhexatriene (DPH) anisotropy. In fluid 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) bilayers, aminocholesterol ordered acyl chains, but slightly less efficiently than cholesterol. Aminocholesterol eliminated the PSM and DPPC gel-to-liquid crystalline phase transition enthalpy linearly with concentration, and the enthalpy approached zero at 30 mol % sterol. Whereas cholesterol was able to increase the thermostability of ordered PSM domains in a fluid bilayer, aminocholesterol under equal conditions failed to do this, suggesting that its interaction with PSM was not as favorable as cholesterols. In ternary mixed bilayers, containing 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), PSM or DPPC, and cholesterol at proportions to contain a liquid-ordered phase (60:40 by mol of POPC and PSM or DPPC, and 30 mol % cholesterol), the average lifetime of trans-parinaric acid (tPA) was close to 20 ns. When cholesterol was replaced with aminocholesterol in such mixed bilayers, the average lifetime of tPA was only marginally shorter (about 18 ns). This observation, together with acyl chain ordering data, clearly shows that aminocholesterol was able to form a liquid-ordered phase with saturated PSM or DPPC. We conclude that aminocholesterol should be a good sterol replacement in model membrane systems for which a partial positive charge is deemed beneficial.     

Characterization of supported membranes on topographically patterned polymeric elastomers and their applications to microcontact printing

This article describes the fluorescence microscopy and imaging ellipsometry-based characterization of supported phospholipid bilayer formation on elastomeric substrates and its application in microcontact printing of spatially patterned phospholipid bilayers. Elastomeric stamps, displaying a uniformly spaced array of square wells (20, 50, and 100 mum linear dimensions), are prepared using poly(dimethyl)siloxane from photolithographically derived silicon masters. Exposing elastomeric stamps, following UV/ozone-induced oxidation, to a solution of small unilamellar phospholipid vesicles results in the formation of a 2D contiguous, fluid phospholipid bilayers. The bilayer covers both the elevated and depressed regions of the stamp and exhibits a lateral connectivity allowing molecular transport across the topographic boundaries. Applications of these bilayer-coated elastomeric stamps in microcontact printing of lipid bilayers reveal a fluid-tearing process wherein the bilayer in contact regions selectively transfers with 75-90% efficiency, leaving behind unperturbed patches in the depressed regions of the stamp. Next, using cholera-toxin binding fluid POPC bilayers that have been asymmetrically doped with ganglioside Gm1 ligand in the outer leaflets, we examine whether the microcontact transfer of bilayers results in the inversion of the lipid leaflets. Our results suggest a complex transfer process involving at least partial bilayer reorganization and molecular re-equilibration during (or upon) substrate transfer. Taken together, the study sheds light on the structuring of lipid inks on PDMS elastomers and provides clues regarding the mechanism of bilayer transfer. It further highlights some important differences in stamping fluid bilayers from the more routine applications of stamping in the creation of patterned self-assembled monolayers.     

Effect of ions on a dipalmitoyl phosphatidylcholine bilayer. a molecular dynamics simulation study

The effect of physiological concentrations of different chlorides on the structure of a dipalmitoyl phosphatidylcholine (DPPC) bilayer has been investigated through atomistic molecular dynamics simulations. These calculations provide support to the concept that Li+, Na+, Ca2+, Mg2+, Sr2+, Ba2+, and Ac3+, but not K+, bind to the lipid-head oxygens. Ion binding exhibits an influence on lipid order, area per lipid, orientation of the lipid head dipole, the charge distribution in the system, and therefore the electrostatic potential across the head-group region of the bilayer. These structural effects are sensitive to the specific characteristics of each cation, i.e., radius, charge, and coordination properties. These results provide evidence aimed at shedding some light into the apparent contradictions among different studies reported recently regarding the ordering effect of ions on zwitterionic phosphatidylcholine lipid bilayers.     

Systematic implicit solvent coarse graining of dimyristoylphosphatidylcholine lipids

We have used systematic structure‐based coarse graining to derive effective site–site potentials for a 10‐site coarse‐grained dimyristoylphosphatidylcholine (DMPC) lipid model and investigated their state point dependence. The potentials provide for the coarse‐grained model the same site–site radial distribution functions, bond and angle distributions as those computed in atomistic simulations carried out at four different lipid–water molar ratios. It was shown that there is a non‐negligible dependence of the effective potentials on the concentration at which they were generated, which is also manifested in the properties of the lipid bilayers simulated using these potentials. Thus, effective potentials computed at low lipid concentration favor to more condensed and ordered structure of the bilayer with lower average area per lipid, while potentials obtained at higher lipid concentrations provide more fluid‐like structure. The best agreement with the reference data and experiment was achieved using the set of potentials derived from atomistic simulations at 1:30 lipid:water molar ratio providing fully saturated hydration of DMPC lipids. Despite theoretical limitations of pairwise coarse‐grained potentials expressed in their state point dependence, all the resulting potentials provide a stable bilayer structure with correct partitioning of different lipid groups across the bilayer as well as acceptable values of the average lipid area, compressibility and orientational ordering. In addition to bilayer simulations, the model has proven its robustness in modeling of self‐aggregation of lipids from randomly dispersed solution to ordered bilayer structures, bicelles, and vesicles. © 2014 Wiley Periodicals, Inc.     

Microcontact printing for creation of patterned lipid bilayers on tetraethylene glycol self-assembled monolayers

Supported lipid bilayers (SLBs) formed on many different substrates have been widely used in the study of lipid bilayers. However, most SLBs suffer from inhomogeneities due to interactions between the lipid bilayer and the substrate. In order to avoid this problem, we have used microcontact printing to create patterned SLBs on top of ethylene-glycol-terminated self-assembled monolayers (SAMs). Glycol-terminated SAMs have previously been shown to resist absorbance of biomolecules including lipid vesicles. In our system, patterned lipid bilayer regions are separated by lipid monolayers, which form over the patterned hexadecanethiol portions of the surface. Furthermore, we demonstrate that α-hemolysin, a large transmembrane protein, inserts preferentially into the lipid bilayer regions of the substrate.     

Effect of chain length and asymmetry on material properties of bilayer membranes

Dissipative particle dynamics is used to extract the material parameters (bending and area stretch moduli) of a bilayer membrane patch. Some experiments indicate that the area stretch modulus of lipid vesicles varies little as the chain length of the lipids composing the bilayer increases. Here we show that making the interactions between the hydrophilic head groups of the model amphiphiles proportional to the hydrophobic tail length reproduces the above result for the area stretch modulus. We also show that the area stretch modulus of bilayers composed of amphiphiles with the same number of tail beads but with asymmetric chains is less than that of bilayers with symmetric chains. The effects on the bilayer density and lateral stress profiles of changes to the amphiphile architecture are also presented.