A density functional study of oxygen atom transfer reactions between biological oxygen atom donors and molybdenum(IV) bis(dithiolene) complexes

Density functional calculations have been used to investigate oxygen atom transfer reactions from the biological oxygen atom donors trimethylamine N-oxide (Me(3)NO) and dimethyl sulfoxide (DMSO) to the molybdenum(IV) complexes [MoO(mnt)(2)](2-) and [Mo(OCH(3))(mnt)(2)](-) (mnt = maleonitrile-1,2-dithiolate), which may serve as models for mononuclear molybdenum enzymes of the DMSO reductase family. The reaction between [MoO(mnt)(2)](2-) and trimethylamine N-oxide was found to have an activation energy of 72 kJ/mol and proceed via a transition state (TS) with distorted octahedral geometry, where the Me(3)NO is bound through the oxygen to the molybdenum atom and the N-O bond is considerably weakened. The computational modeling of the reactions between dimethyl sulfoxide (DMSO) and [MoO(mnt)(2)](2-) or [Mo(OCH(3))(mnt)(2)](-) indicated that the former is energetically unfavorable while the latter was found to be favorable. The addition of a methyl group to [MoO(mnt)(2)](2-) to form the corresponding des-oxo complex not only lowers the relative energy of the products but also lowers the activation energy. In addition, the reaction with [Mo(OCH(3))(mnt)(2)](-) proceeds via a TS with trigonal prismatic geometry instead of the distorted octahedral TS geometry modeled for the reaction between [MoO(mnt)(2)](2-) and Me(3)NO.     

X-ray spectroscopy of enzyme active site analogues and related molecules: bis(dithiolene)molybdenum(IV) and -tungsten(IV,VI) complexes with variant terminal ligands

The X-ray absorption spectra at the molybdenum and selenium K-edges and the tungsten L2,3-edges are acquired for a set of 14 Mo(IV) and W(IV,VI) bis(dithiolene) complexes related to the active sites of molybdo- and tungstoenzymes. The set includes square pyramidal [MoIVL(S2C2Me2)2]- (L = O2-, R3SiO-, RO-, RS-, RSe-) and [WIV(OR)(S2C2Me2)2]-, distorted trigonal prismatic [MoIV(CO)(SeR)(S2C2Me2)2]- and [WIV(CO)L(S2C2Me2)2]- (L = RS-, RSe-), and distorted octahedral [WVIO(OR)(S2C2Me2)2]-. The dithiolene simulates the pterin-dithiolene cofactor ligand, and L represents a protein ligand. Bond lengths are determined by EXAFS analysis using the GNXAS protocol. Normalized edge spectra, non-phase-shift-corrected Fourier transforms, and EXAFS data and fits are presented. Bond lengths determined by EXAFS and X-ray crystallography agree to < or = 0.02 A as do the M-Se distances determined by both metal and selenium EXAFS. The complexes [MoIV(QR)(S2C2Me2)2]- simulate protein ligation by the DMSO reductase family of enzymes, including DMSO reductase itself (Q = O), dissimilatory nitrate reductase (Q = S), and formate dehydrogenase (Q = Se). Edge shifts of these complexes correlate with the ligand electronegativities. Terminal ligand binding is clearly distinguished in the presence of four Mo-S(dithiolene) interactions. Similarly, five-coordinate [ML(S2C2Me2)2]- and six-coordinate [M(CO)L(S2C2Me2)2]- are distinguishable by edge and EXAFS spectra. This study expands a previous XAS investigation of bis(dithiolene)metal(IV,V,VI) complexes (Musgrave, K. B.; Donahue, J. P.; Lorber, C.; Holm, R. H.; Hedman, B.; Hodgson, K. O. J. Am. Chem. Soc. 1999, 121, 10297) by including a larger inventory of molecules with variant physiologically relevant terminal ligation. The previous and present XAS results should prove useful in characterizing and refining metric features and structures of enzyme sites.     

Functional analogue reaction systems of the DMSO reductase isoenzyme family: probable mechanism of S-oxide reduction in oxo transfer reactions mediated by bis(dithiolene)-tungsten(IV,VI) complexes

The recent development of structural and functional analogues of the DMSO reductase family of isoenzymes allows mechanistic examination of the minimal oxygen atom transfer paradigm M(IV) + QO M(VI) O + Q with the biological metals M = Mo and W. Systematic variation of the electronic environment at the WIV center of desoxo bis(dithiolene) complexes is enabled by introduction of para-substituted phenyl groups in the equatorial (eq) dithiolene ligand and the axial (ax) phenolate ligand. The compounds [W(CO)2(S2C2(C6H4-p-X)2)2] (54-60%) have been prepared by ligand transfer from [Ni(S2C2(C6H4-p-X)2)2] to [W(CO)3(MeCN)3]. A series of 25 complexes [W(IV)(OC6H4-p-X')(S2C2(C6H4-p-X)2)2]1- ([X4,X'], X = Br, F, H, Me, OMe; X' = CN, Br, H, Me, NH2; 41-53%) has been obtained by ligand substitution of five dicarbonyl complexes with five phenolate ligands. Linear free energy relationships between E1/2 and Hammett constant p for the electron-transfer series [Ni(S2C2(C6H4-p-X)2)2]0,1-,2- and [W(CO)2(S2C2(C6H4-p-X)2)2]0,1-,2- demonstrate a substituent influence on electron density distribution at the metal center. The reactions [WIV(OC6H4-p-X')(S2C2(C6H4-p-X)2)2]1- + (CH2)4SO [W(VI)O(OC6H4-p-X')(S2C2(C6H4-p-X)2)2]1- + (CH2)4S with constant substrate are second order with large negative activation entropies indicative of an associative transition state. Rate constants at 298 K adhere to the Hammett equations log(k([X4,X']/k[X4,H]) = rho(ax)sigma(p) and log(k[X4,X']/k([H4,X']) = 4rho(eq)sigma(p). Electron-withdrawing groups (EWG) and electron-donating groups (EDG) have opposite effects on the rate such that k(EWG) > k(EDG). The effects of X' on reactivity are found to be approximately 5 times greater than that of X (rho(ax) = 2.1, rho(eq) = 0.44) in the Hammett equation. Using these and other findings, a stepwise oxo transfer reaction pathway is proposed in which an early transition state, of primary W(IV)-O(substrate) bond-making character, is rate-limiting. This is followed by a six-coordinate substrate complex and a second transition state proposed to involve atom and electron transfer leading to the development of the W(VI)=O group. This work is the most detailed mechanistic investigation of oxo transfer mediated by a biological metal.     

Analogue reaction systems of selenate reductase

Analogue reaction systems of selenate reductase, which reduces substrate in the overall enzymatic reaction SeO4(2-) + 2H+ + 2e- --> SeO3(2-) + H2O, have been developed using bis(dithiolene) complexes of Mo(IV) and W(IV). On the basis of the results of EXAFS analysis of the oxidized and reduced enzyme, the minimal reaction Mo(IV)OH + SeO4(2-) --> Mo(VI)O(OH) + SeO3(2-) is probable. The square pyramidal complexes [M(OMe)(S2C2Me2)2](1-) (M = Mo, W) were prepared as structural analogues of the reduced enzyme site. The systems, [ML(S2C2Me2)2](1-)/SeO4(2-) (L = OMe, OPh, SC6H2-2,4,6-Pr(i)3) in acetonitrile, cleanly reduce selenate to selenite in second-order reactions whose negative entropies of activation implicate associative transition states. Rate constants at 298 K are in the 10(-2)-10(-4) M(-1) s(-1) range with DeltaS++ = -12 to -34 eu. When rate constants are compared with previous data for the reduction of (CH2)4SO, Ph3AsO, and nitrate by oxygen atom transfer, reactivity trends dependent on the metal, axial ligand L, and substrate are identified. As in all other cases of substrate reduction by oxo transfer, the kinetic metal effect k(2)W > k(2)Mo holds. A proposal from primary sequence alignments suggesting that a conserved Asp residue is a likely ligand in the type II enzymes in the DMSO reductase family has been pursued by synthesis of the [Mo(IV)(O2CR)(S2C2Me2)2](1-) (R = Ph, Bu(t)) complexes. The species display symmetrical eta2-carboxylate binding and distorted trigonal prismatic stereochemistry. They serve as possible structural analogues of the reduced sites of nitrate, selenate, and perchlorate reductases under the proposed aspartate coordination. Carboxylate binding has been crystallographically demonstrated for one nitrate reductase, but not for the other two enzymes.     

Structural and functional analogue of the active site of polysulfide reductase from Wolinella succinogenes

Synthesis of [PPh4]2[Mo(SPh)2(S2C2(CN)2)2] (2) from [PPh4]2[MoO(S2C2(CN)2)2] (1) has been achieved to mimic the postulated [Mo(S)6] core of polysulfide reductase with two thiolates and two bis(ene-dithiolate) ligands. Compound 2 reacts with polysulfide to yield H2S, modeling the function of polysulfide reductase. The facile conversion of 2 back to 1 in moist solvent suggests that the interconversion of the [MoIV = O] and [MoIV - X] (X = O-Ser, S-Cys, Se-Cys) moieties might occur in the DMSO reductase class of enzymes under appropriate hydrophobic/hydrophilic conditions.     

Substrate and metal control of barrier heights for oxo transfer to Mo and W bis-dithiolene sites

Reaction coordinates for oxo transfer from the substrates Me(3)NO, Me(2)SO, and Me(3)PO to the biologically relevant Mo(IV) bis-dithiolene complex [Mo(OMe)(mdt)(2)](-) where mdt = 1,2-dimethyl-ethene-1,2-dithiolate(2-), and from Me(2)SO to the analogous W(IV) complex, have been calculated using density functional theory. In each case, the reaction first proceeds through a transition state (TS1) to an intermediate with substrate weakly bound, followed by a second transition state (TS2) around which breaking of the substrate X-O bond begins. By analyzing the energetic contributions to each barrier, it is shown that the nature of the substrate and metal determines which transition state controls the rate-determining step of the reaction.     

Bis(dithiolene)molybdenum analogues relevant to the DMSO reductase enzyme family: synthesis, structures, and oxygen atom transfer reactions and kinetics.

A series of dithiolene complexes of the general type [Mo(IV)(QR')(S(2)C(2)Me(2))(2)](1)(-) has been prepared and structurally characterized as possible structural and reactivity analogues of reduced sites of the enzymes DMSOR and TMAOR (QR' = PhO(-), 2-AdO(-), Pr(i)()O(-)), dissimilatory nitrate reductase (QR' = 2-AdS(-)), and formate dehydrogenase (QR' = 2-AdSe(-)). The complexes are square pyramidal with the molybdenum atom positioned 0.74-0.80 A above the S(4) mean plane toward axial ligand QR'. In part on the basis of a recent clarification of the active site of oxidized Rhodobacter sphaeroides DMSOR (Li, H.-K.; Temple, C.; Rajagopalan, K. V.; Schindelin, H. J. Am. Chem. Soc. 2000, 122, 7673), we have adopted the minimal reaction paradigm Mo(IV) + XO right arrow over left arrow Mo(VI)O + X involving desoxo Mo(IV), monooxo Mo(VI), and substrate/product XO/X for direct oxygen atom transfer of DMSOR and TMAOR enzymes. The [Mo(OR')(S(2)C(2)Me(2))(2)](1)(-) species carry dithiolene and anionic oxygen ligands intended to simulate cofactor ligand and serinate binding in DMSOR and TMAOR catalytic sites. In systems with N-oxide and S-oxide substrates, the observed overall reaction sequence is [Mo(IV)(OR')(S(2)C(2)Me(2))(2)](1)(-) + XO --> [Mo(VI)O(OR')(S(2)C(2)Me(2))(2)](1)(-) --> [Mo(V)O(S(2)C(2)Me(2))(2)](1)(-). Direct oxo transfer in the first step has been proven by isotope labeling. The reactivity of [Mo(OPh)(S(2)C(2)Me(2))(2)](1)(-) (1) has been the most extensively studied. In second-order reactions, 1 reduces DMSO and (CH(2))(4)SO (k(2) approximately 10(-)(6), 10(-)(4) M(-)(1) s(-)(1); DeltaS(double dagger) = -36, -39 eu) and Me(3)NO (k(2) = 200 M(-)(1) s(-)(1); DeltaS(double dagger) = -21 eu) in acetonitrile at 298 K. Activation entropies indicate an associative transition state, which from relative rates and substrate properties is inferred to be concerted with X-O bond weakening and Mo-O bond making. The Mo(VI)O product in the first step, such as [Mo(VI)O(OR')(S(2)C(2)Me(2))(2)](1)(-), is an intermediate in the overall reaction sequence, inasmuch as it is too unstable to isolate and decays by an internal redox process to a Mo(V)O product, liberating an equimolar quantity of phenol. This research affords the first analogue reaction systems of biological N-oxide and S-oxide substrates that are based on desoxo Mo(IV) complexes with biologically relevant coordination. Oxo-transfer reactions in analogue systems are substantially slower than enzyme systems based on a k(cat)/K(M) criterion. An interpretation of this behavior requires more information on the rate-limiting step(s) in enzyme catalytic cycles. (2-Ad = 2-adamantyl, DMSOR = dimethyl sulfoxide reductase, TMAOR = trimethylamine N-oxide reductase)     

Synthesis and structures of bis(dithiolene)-tungsten(IV) complexes related to the active sites of tungstoenzymes

Recent protein crystallographic results on tungsten enzymes and primary sequence relationships between certain molybdenum and tungsten enzymes provoke interest in the generalized bis(dithiolene) complexes [WIV(QR)(S2C2R'2)2]1- and [WVIO(QR)(S2C2R'2)2]1- (Q = O, S, Se) as minimal representations of enzyme sites. The existence and stability of W(IV) complexes have been explored by synthesis. Reaction of [W(CO)2(S2C2Me2)2] (1) with PhO- results in complete CO substitution to give [W(OPh)(S2C2Me2)2]1- (2). Reaction of 1 with PhQ- affords the monocarbonyls [W(CO)(QPh)(S2C2Me2)2]1- (Q = S (3), Se (5)). The use of sterically demanding 2,4,6-Pri3C6H2Q- also yields monocarbonyls, [W(CO)(QC6H2-2,4,6-Pri3)(S2C2Me2)2]1- (Q = S (4), Se (6)). The X-ray structures of square pyramidal 2 and trigonal prismatic 3-6 (with unidentate ligands cis) are described. The tendency to substitute one or both carbonyl ligands in 1 in the formation of [MIV(QAr)(S2C2Me2)2]1- and [MIV(CO)(QAr)(SeC2Me2)2]1- with M = Mo and W is related to the M-Q bond length and ligand steric demands. The results demonstrate a stronger binding of CO by W(IV) than Mo(IV), a behavior previously demonstrated by thermodynamic and kinetic features of zerovalent carbonyl complexes. Complexes 3-6 can be reversibly reduced to W(III) at approximately -1.5 V versus SCE. On the basis of the potential for 2(-2.07 V), monocarbonyl ligation stabilizes W(III) by approximately 500 mV. This work is part of a parallel investigation of the chemistry of bis(dithiolene)-molybdenum (Lim, B. S.; Donahue, J. P.; Holm, R. H. Inorg. Chem. 2000, 39, 263) and -tungsten complexes related to enzyme active sites.     

Synthesis and structures of bis(dithiolene)molybdenum complexes related to the active sites of the DMSO reductase enzyme family

Structural analogues of the reduced (Mo(IV)) sites of members of the DMSO reductase family of molybdoenzymes are sought. These sites usually contain two pterin-dithiolene cofactor ligands and one protein-based ligand. Reaction of [Mo(MeCN)3(CO)3] and [Ni(S2C2R2)2] affords the trigonal prismatic complexes [Mo(CO)2(S2C2R2)2] (R = Me (1), Ph (2)), which by carbonyl substitution serve as useful precursors to a variety of bis(dithiolene)molybdenum-(IV,V) complexes. Reaction of 1 with Et4NOH yields [MoO(S2C2Me2)2]2- (3), which is readily oxidized to [MoO(S2C2Me2)2]1- (4). The hindered arene oxide ligands ArO- afford the square pyramidal complexes [Mo(OAr)(S2C2R2)2]1- (5, 6). The ligands PhQ- affordthe trigonal prismatic monocarbonyls [Mo(CO)(QPh)(S2C2Me2)2]1- (Q = S (8), Se (12)) while the bulky ligand ArS- forms square pyramidal [Mo(SAr)(S2C2R2)2]- (9, 10). In contrast, reactions with ArSe- result in [Mo(CO)(SeAr)(S2C2R2)2]1-(14, 15), which have not been successfully decarbonylated. Other compounds prepared by substitution reactions of 1 and 2 include the bridged dimers [Mo2(mu-Q)2(S2C2Me2)4]2- (Q = S (7), Se (11)) and [Mo2(mu-SePh)2(S2C2Ph2)4]2- (13). The complexes 1, 3-5, 7-10, 12-14, [Mo(S2C2Me2)3] (16), and [Mo(S2C2Me2)3]1- (17) were characterized by X-ray structure determinations. Certain complexes approach the binding arrangements in at least one DMSO reductase (5/6) and its Ser/Cys mutant, and in dissimilatory nitrate reductases (9/10). This investigation provides the initial demonstration of the new types of bis(dithiolene)molybdenum(IV) complexes available through [Mo(CO)2(S2C2R2)2] precursors, some of which will be utilized in reactivity studies. (Ar = 2,6-diisopropylphenyl or 2,4,6-triisopropylphenyl.)     

Electronic spectral studies of molybdenyl complexes. 2. MCD spectroscopy of [MoOS4]- centers

Magnetic circular dichroism (MCD) and absorption spectroscopies have been used to probe the electronic structure of [PPh4][MoO(p-SC6H4X)4] (X = H, Cl, OMe) and [PPh4][MoO(edt)2] complexes (edt = ethane-1,2-dithiolate). The results of density functional calculations (DFT) on [MoO(SMe)4]- and [MoO(edt)2]- model complexes were used to provide a framework for the interpretation of the spectra. Our analysis shows that the lowest energy transitions in [MoVOS4] chromophores (S4 = sulfur donor ligand) result from S-->Mo charge transfer transitions from S valence orbitals that lie close to the ligand field manifold. The energies of these transitions are strongly dependent on the orientation of the S lone-pair orbitals with respect to the Mo atom that is determined by the geometry of the ligand backbone. Thus, the lowest energy transition in the MCD spectrum of [PPh4][MoO(p-SC6H4X)4] (X = H) occurs at 14,800 cm-1, while that in [PPh4][MoO(edt)2] occurs at 11,900 cm-1. The identification of three bands in the absorption spectrum of [PPh4][MoO(edt)2] arising from LMCT from S pseudo-sigma combinations to the singly occupied Mo 4d orbital in the xy plane suggests that there is considerable covalency in the ground-state electronic structures of [MoOS4] complexes. DFT calculations on [MoO(SMe)4]- reveal that the singly occupied HOMO is 53% Mo 4dxy and 35% S p for the equilibrium C4 geometry. For [MoO(edt)2]- the steric constraints imposed by the edt ligands result in the S pi orbitals being of similar energy to the Mo 4d manifold. Significant S pseudo-sigma and pi donation may also weaken the Mo identical to O bond in [MoOS4] centers, a requirement for facile active site regeneration in the catalytic cycle of the DMSO reductases. The strong dependence of the energies of the bands in the absorption and MCD spectra of [PPh4][MoO(p-SC6H4X)4] (X = H, Cl, OMe) and [PPh4][MoO(edt)2] on the ligand geometry suggests that the structural features of the active sites of the DMSO reductases may result in an electronic structure that is optimized for facile oxygen atom transfer.     

Synthesis and structures of bis(dithiolene)tungsten(IV,VI) thiolate and selenolate complexes: approaches to the active sites of molybdenum and tungsten formate dehydrogenases

Formate dehydrogenases are molybdenum- or tungsten-containing enzymes that catalyze the oxidation of formate to carbon dioxide. Among the significant characteristics of the mononuclear active sites are coordination of two pyranopterindithiolene ligands and selenocysteinate to the metal in oxidation states IV-VI. The first detailed investigation of the synthesis and structures of bis(dithiolene)tungsten selenolate and analogous thiolate complexes of relevance to formate dehydrogenases has been undertaken. Some 17 complexes of the types [WIV(QR)(S2C2Me2)2]-, [WVIO(QR)(S2C2Me2)2]-, and [WVIS(QR)(S2C2Me2)2]- (Q = S, Se; R = tert-butyl, 1-adamantyl) and the desoxo species [WVI(SR)(OSiR'3)(S2C2Me2)2] (R' = Me, Ph) were prepared. Ten structures of representative members of these types were determined; WIV complexes are square-pyramidal and WVI complexes are six-coordinate, with geometries intermediate between octahedral and trigonal-prismatic. Selenolate complexes are less stable than similar thiolate species; decomposition products were identified as [WV2(mu2-Q)2(S2C2Me2)2]2- and [WIV,V2(mu2-Se)(S2C2Me2)4]-. The several [MoIV(QR)(S2C2Me2)2]- complexes prepared earlier and the tungsten compounds synthesized in this work form a family of molecules whose overall stereochemistry and metric features are those expected in the absence of protein structural constraints.     

Reaction systems related to dissimilatory nitrate reductase: nitrate reduction mediated by bis(dithiolene)tungsten complexes

Kinetics of the oxygen atom transfer reactions [M(IV)(QC6H2-2,4,6-Pr(i)3)(S2C2Me2)2]1- + XO --> [M(VI)O(QC6H2-2,4,6-Pr(i)3)(S2C2Me2)2]1- + X in acetonitrile with substrates XO = NO3- and (CH2)4SO have been determined. The reactants are bis(dithiolene) complexes with M = Mo, W and sterically encumbered axial ligands with Q = O, S to stabilize mononuclear square pyramidal structures. The complex [MoIV(SC6H2-2,4,6-Pr(i)3)(S2C2Me2)2]1- is an analogue of the active site of dissimilatory nitrate reductase which in the reduced state contains a molybdenum atom bound by two pyranopterindithiolene ligands and a cysteinate residue. Nitrate reduction was studied with tungsten complexes because of unfavorable stability properties of the molybdenum complexes. Product nitrite was detected by a colorimetric method. All reactions with both substrates are second-order with associative transition states (deltaS approximately -20 eu). Variation of atoms M and Q, together with data from prior work, allows certain kinetics comparisons to be made. Among them, k2W/k2Mo = 25 for (CH2)4SO reduction (Q = S), an expression of the kinetic metal effect. Further, k2S/k2O = 28 and approximately 10(4) for nitrate and (CH2)4SO reduction, respectively, effects attributed to relatively more steric congestion in achieving the transition state with hindered phenolate vs thiolate ligands. The effect is more pronounced with the larger substrate. These results demonstrate the feasibility of tungsten-mediated nitrate reduction by direct atom transfer using molecules with both axial thiolate and phenolate ligands. Complexes of the type [M(IV)(OR)(S2C2Me2)2] are capable of reducing biological N-oxide, S-oxide, and nitrate substrates and thus constitute functional analogue reaction systems of enzymic transformations.     

Coordination chemistry of the soluble metal oxide analogue [Mo5O13(OCH3)4(NO)]3- with manganese carbonyl species

The reactions of neutral or cationic manganese carbonyl species towards the oxo-nitrosyl complex [Na(MeOH)[Mo(5)O(13)(OCH(3))(4)(NO)]](2-) have been investigated in various conditions. This system provides an unique opportunity for probing the basic reactions involved in the preparation of solid oxide-supported heterogeneous catalysts, that is, mobility of transition-metal species at the surface and dissolution-precipitation of the support. Under nitrogen and in the dark, the reaction of in situ generated fac-[Mn(CO)(3)](+) species with (nBu(4)N)(2)[Na(MeOH)-[Mo(5)O(13)(OMe)(4)(NO)]] in MeOH yields (nBu(4)N)(2)[Mn(CO)(3)(H(2)O)[Mo(5)O(13)(OMe)(4)(NO)]] at room temperature, while (nBu(4)N)(3)[Na[Mo(5)O(13)(OMe)(4)(NO)](2)[Mn(CO)(3)](2)] is obtained under reflux. The former transforms into the latter under reflux in methanol in the presence of sodium bromide; this involves the migration of the fac-[Mn(CO)(3)](+) moiety from a basal kappa(2)O coordination site to a lateral kappa(3)O site. Oxidation and decarbonylation of manganese carbonyl species as well as degradation of the oxonitrosyl starting material and reaggregation of oxo(methoxo)molybdenum fragments occur in non-deareated MeOH, and both (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(16)(OMe)(2)](2)[Mn(CO)(3)](2)] and (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(13)(OMe)(4)(NO)](2)] as well as (nBu(4)N)(2)[MnBr[Mo(5)O(13)(OMe)(4)(NO)]] have been obtained in this way. The rhenium analogue (nBu(4)N)(2)[Re(CO)(3)(H(2)O)[Mo(5)O(13)(OMe)(4)(NO)]] has also been synthesized. The crystal structures of (nBu(4)N)(2)[Re(CO)(3)(H(2)O)[Mo(5)O(13)(OMe)(4)(NO)]], (nBu(4)N)(3)[Na[Mo(5)O(13)(OMe)(4)(NO)](2)[Mn(CO)(3)](2)], (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(16)(OMe)(2)](2)[Mn(CO)(3)](2)], (nBu(4)N)(4)[Mn(H(2)O)(2)[Mo(5)O(13)(OMe)(4)(NO)](2)] and (nBu(4)N)(2)[MnBr[Mo(5)O(13)(OMe)(4)(NO)]] have been determined.     

Rapid, covalent addition of phosphine to dithiolene in a molybdenum tris(dithiolene). A new structural model for dimethyl sulfoxide reductase

Triphenylphosphine (PPh(3)) rapidly and reversibly adds to the bdt ligand in the molybdenum tris(dithiolene) complex Mo(tfd)(2)(bdt) [tfd = S(2)C(2)(CF(3))(2); bdt = S(2)C(6)H(4)], turning chelating bdt into the monodentate zwitterionic ligand SC(6)H(4)SPPh(3). A second PPh(3) molecule fills the newly created open site in the crystallographically characterized product Mo(tfd)(2)(SC(6)H(4)SPPh(3))(PPh(3)), which is a structural model for dimethyl sulfoxide (DMSO) reductase. While the complex is only a precatalyst for reduction of DMSO by PPh(3) (the initially low catalytic rate increases with time), Mo(tfd)(2)(SMe(2))(2) was found to be catalytically active without an induction period.     

Synthesis and Crystal Structure of a Molybdenum Carbonyl Compound with Thiolate and Dithiocarbamate Ligands,[Bu4N][(OC)4Mo(μ-SC6H5)2Mo(C5H10CNS2)(CO)2]

A di-molybdenum carbonyl compound containing thiolate and dithiocarbamate li- gands, [Bu4N][(CO)4Mo(μ-SC6H5)2Mo(C5H10dtc)(CO)2] 1 (C5H10dtc = S2CNC5H10), has been pre- pared by reaction of [Mo2(SC6H5)2(CO)8] with C5H10dtcNa and [NBu4]Br in acetone. It crystallizes in monoclinic, space group P21/n with a = 13.162(3), b = 17.466(2), c = 20.453(4)(A),β = 100.77(1)°, Z = 4, V = 4619(2)(A)3, C40H56Mo2N2O6S4, Mr = 980.95, Dc = 1.389 g/cm3, μ= 7.66 cm-1, F(000) = 1988 and R = 0.0746 for 5161 observed reflections with I > 2σ(I). The complex contains a [Mo2S2]2- planar core in which one Mo atom is chelated by a C5H10dtc ligand, leading to different coordination environments of the two Mo atoms. 95Mo NMR measurement indicates that the two Mo atoms are in different oxidation states.     

(Fluoren-9-ylidene)methanedithiolato complexes of platinum: synthesis, reactivity, and luminescence

Platinum(II) complexes with (fluoren-9-ylidene)methanedithiolato and its 2,7-di-tert-butyl- and 2,7-dimethoxy-substituted analogues were obtained by reacting different chloroplatinum(II) precursors with the piperidinium dithioates (pipH)[(2,7-R2C12H6)CHCS2] [R = H (1a), t-Bu (1b), or OMe (1c)] in the presence of piperidine. The anionic complexes Q2[Pt{S(2)C=C(C12H6R(2)-2,7)}2] [R = H, (Pr(4)N)(2)2a; R = t-Bu, (Pr4N)(2)2b, (Et4N)(2)2b; R = OMe, (Pr4N)(2)2c] were prepared from PtCl(2), piperidine, the corresponding QCl salt, and 1a-c in molar ratio 1:2:2:2. In the absence of QCl, the complexes (pipH)(2)2b and [Pt(pip)(4)]2b were isolated depending on the PtCl(2):pip molar ratio. The neutral complexes [Pt{S2C=C(C12H6R(2)-2,7)L(2)] [L = PPh(3), R = H (3a), t-Bu (3b), OMe (3c); L = PEt(3), R = H (4a), t-Bu (4b), OMe (4c); L(2) = dbbpy, R = H (5a), t-Bu (5b), OMe (5c) (dbbpy = 4,4'-di-tert-butyl-2,2'-bipyridyl)] were similarly prepared from the corresponding precursors [PtCl2L2] and 1a-c in the presence of piperidine. Oxidation of Q(2)2b with [FeCp2]PF6 afforded the mixed Pt(II)-Pt(IV) complex Q2[Pt2{S2C=C[C12H6(t-Bu)(2)-2,7]}4] (Q(2)6, Q = Et4N+, Pr4N+). The protonation of (Pr4N)(2)2b with 2 equiv of triflic acid gave the neutral dithioato complex [Pt2{S2CCH[C12H6(t-Bu)(2)-2,7]}4] (7). The same reaction in 1:1 molar ratio gave the mixed dithiolato/dithioato complex Pr4N[Pt{S2C=C[C12H6(t-Bu)(2)-2,7]}{S2CCH[C12H6(t-Bu)(2)-2,7]}] (Pr(4)N8) while the corresponding DMANH+ salt was obtained by treating 7 with 2 equiv of 1,8-bis(dimethylamino)naphthalene (DMAN). The crystal structures of 3b and 5c.CH2Cl2 have been solved by X-ray crystallography. All the platinum complexes are photoluminescent at 77 K in CH2Cl2 or KBr matrix, except for Q(2)6. Compounds 5a-c and Q8 show room-temperature luminescence in fluid solution. The electronic absorption and emission spectra of the dithiolato complexes reveal charge-transfer absorption and emission energies which are significantly lower than those of analogous platinum complexes with previously described 1,1-ethylenedithiolato ligands and in most cases compare well to those of 1,2-dithiolene complexes.     

Trapping of hemiquinone radicals at Mo and P sites by phosphide-bridged dimolybdenum species: chemistry of complexes [Mo2(eta5-C5H5)2(OC6H4OH)(mu-PR2)(CO)4] and [Mo2(eta5-C5H5)2{mu-PR(OC6H4OH)}(CO)4]- (R = Cy, Ph)

The phosphide-bridged dimolybdenum complexes (H-DBU)[Mo2Cp2(mu-PR2)(CO)4] (R= Cy, Ph; DBU = 1,8-diazabicyclo[5.4.0.]undec-7-ene) react with p-benzoquinone to give the hemiquinone complexes [Mo(2)Cp2(OC6H4OH)(mu-PR2)(CO)4]. The latter experience facile homolytic cleavage of the corresponding Mo-O bonds and react readily at room temperature with HSPh or S2Ph2 to give the thiolate complexes [Mo2Cp2(mu-PCy2)(mu-SPh)(CO)4] or [Mo2Cp2(mu-PR2)(mu-SPh)(CO)2]. In contrast, PRH-bridged substrates experience overall insertion of quinone into the P-H bond to give the anionic compounds (H-DBU)[Mo(2)Cp2{mu-PR(OC6H4OH)}(CO)4], which upon acidification yield the corresponding neutral hydrides. The cyclohexyl anion experiences rapid nucleophilic displacement of the hemiquinone group by different anions ER- (ER = OH, OMe, OC4H5, OPh, SPh) to give novel anionic compounds (H-DBU)[Mo2Cp2{mu-PCy(ER)}(CO)4], which upon acidification yield the corresponding neutral hydrides. The structure of four of these hydride complexes [PPh(OC6H4OH), PCy(OH), PCy(OMe), and PCy(OPh) bridges] was determined by X-ray diffraction methods and confirmed the presence of cis and trans isomers in several of these complexes. In addition, it was found that the hydroxyphosphide anion [Mo2Cp2{mu-PCy(OH)}(CO)4]- displays in solution an unprecedented tautomeric equilibrium with its hydride-oxophosphinidene isomer [Mo2Cp2(mu-H){mu-PCy(O)}(CO)4]-.     

Half-sandwich cyclopentandienyl molybdenum and tungsten nitrosyl complexes containing bidentate sulfur ligands

Half-sandwich nitrosyl complexes Cp*M(NO)I2 (M = Mo, or W) react with dithiocarbamates (NaS2CNMe2 and NaS2CNEt2) in THF to form of complexes: Cp*Mo(NO)I (S2CNMe2) (1), Cp*Mo(NO)I(S2CNEt2) (2), Cp*W(NO)I(S2CNMe2) (3) and Cp*W(NO)I(S2CNEt2) (4) in high yields. Treatments of Cp*M(NO)I2 (M = Mo, W) or [CpMo(NO)I2]2 with phosphinodithioate (NaS2PMe2) and phosphorodithioate [(NH4)S2P(OMe)2] result in complexes: Cp*Mo(NO)I(S2PMe2) (5a), CpMo(NO)I (S2PMe2) (5b), Cp*Mo(NO)(S2PMe2)2 (6a), CpMo (NO) (S2PMe2)2 (6b) and Cp*Mo(NO)I[S2P(OMe)2] (7), Cp*W(NO)I(S2PMe2) (8), Cp*W(NO) I[S2P(OMe)]2 (9). Treatment of (5a) and (5b) with an excess of NaS2PMe2 gives (6a) and (6b). The complexes have been characterized by their elemental analyses, i.r., 1H, 13C-n.m.r. and by EI-MS spectrometry.     

Structural, electrochemical and oxygen atom transfer properties of a molybdenum selenoether complex [Mo2O4(OC3H6SeC3H6O)2] and its thioether analogue [Mo2O4(OC3H6SC3H6O)2

The first crystallographically characterized molybdenum(vi) selenoether complex [Mo(2)O(4)(OC(3)H(6)SeC(3)H(6)O)(2)] and its thioether analogue [Mo(2)O(4)(OC(3)H(6)SC(3)H(6)O)(2)] were synthesised. Their structural, electrochemical and oxygen atom transfer properties are compared. This is relevant for the molybdenum cofactors of the DMSO reductase family where the coordination of the active site metal occurs through O (serine/aspartate), S (cysteine) or Se (selenocysteine). Both structures are almost identical except for those parameters that are directly derived from the different sizes of the varied ligand atoms (Se and S). No trans influence was observed. The metal centered redox process (Mo(V)<-->Mo(VI)) is at slightly lower voltage for the sulfur than for the selenium complex. The selenium compound catalyses the oxygen atom transfer from DMSO to PPh(3) by a different mechanism and at a higher rate than the sulfur compound, which is an indication that cysteine and selenocysteine might be used for a purpose in the different molybdenum and tungsten cofactors.