Synthesis and thermochemical characteristics of Na2O · Al2O3 · 2.5H2O

A pure phase of monosodium aluminate hydrate Na₂O · Al₂O₃ · 2.5H₂O (MAH) is synthesized and characterized by means of XRD, IR, SEM, TGA, and DSC. The heat capacity of the compound is measured in the temperature range of ?100 to 100°C, and the thermal contributions to enthalpy and entropy are calculated. The standard entropy, enthalpy, and Gibbs energy of formation of MAH at 298 K are estimated.     

Synthesis and crystal structure of the hydrated magnesium diphosphate Mg2P2O7·3.5H2O and its high temperature variant Mg2P2O7·H2O

The synthesis and crystal structure of a novel hydrated magnesium diphosphate and its high temperature variant are described. Both structures were solved from powder X-ray diffraction data. The room temperature variant with composition Mg₂P₂O₇·3.5H₂O crystallises in the monoclinic space group P2₁/c (No. 14) with a=10.9317(1), b=8.05578(9), c=9.2774(1) Å, β=90.201(1)°, V=816.99(2) ų and Z=4. The structure consists of sheets stacked along [100] which are linked through MgO₂(H₂O)₄ pillars into a three-dimensional framework with cavities containing water molecules. Within the sheets there are infinite edge-sharing chains of Mg octahedra along [010] which are cross linked by P₂O₇⁴⁻ groups. A high temperature variant exists around 200°C. The crystal structure of this compound with composition Mg₂P₂O₇·H₂O was solved and refined in the monoclinic space group C2/c (No. 15) with a=18.6596(4), b=7.9769(1), c=8.9757(2) Å, β=107.378(1)°, V=1275.01(4) ų, Z=8. The transformation to Mg₂P₂O₇·H₂O involves removal of the water molecules in the cavities and the water molecules of the Mg octahedral pillars in Mg₂P₂O₇·3.5H₂O. The sheets in Mg₂P₂O₇·3.5H₂O however remain unchanged during the transformation as the water molecule coordinating Mg here is retained. These sheets are linked through tetrahedral MgO₄ pillars into a three-dimensional structure containing infinite 10-membered ring channels along [001]. Both compounds have been further characterised by ³¹P MAS NMR spectroscopy, thermogravimetric analysis and high temperature powder X-ray diffraction.     

A combined experimental and model analysis on the effect of pH and O2(aq) on γ-radiolytically produced H2 and H2O2

The effects of pH and dissolved O₂ on the γ-radiolysis of water were studied at an absorbed dose rate of 2.5 Gy s⁻¹. Argon- or air-saturated water with no headspace was irradiated and the aqueous samples were analyzed for molecular radiolysis products (H₂ and H₂O₂) as a function of irradiation time. The experimental results were compared with computer simulation results using a comprehensive water-radiolysis kinetic model, consisting of the primary radiolysis production, subsequent reactions and related acid–base equilibria. Both the experimental and computer model results were discussed based on the steady-state kinetic analysis of smaller reaction sets consisting of key production and removal reactions. While the main production path for a water decomposition product is the primary radiolysis, the main removal path varies. For H₂O₂ the main removal path is the reactions with e_aq⁻ and OH, whereas for H₂ it is the reaction with OH. As a result, the presence of a dissolved species, or a change in chemical environment, affects the concentrations of H₂O₂ and H₂ through interaction with radicals e_aq⁻ and OH. Over a wide range of conditions, there exist quantitative but simple relationships between the radical and the molecular product concentrations. The experimental and model analyses show that dissolved oxygen increases the steady-state concentrations of H₂O₂ and H₂ by reacting with OH and e_aq^–, and the impact of oxygen is more noticeable at pH below 8. The steady-state concentrations of water decomposition products are nearly independent of pH in the range 5–8. However, raising pH above the pKa value of the acid–base equilibrium of H (⇆e_aq⁻+H⁺) significantly increases [H₂O₂] and [H₂] at the expenses of [OH] and [e_aq^–]. At pH >10, the radiolytical production of O₂ becomes significant, but at a finite rate. This considerably increases the time for the irradiated system to reach a steady state, and is responsible for different impacts on [H₂O₂] and [H₂] due to radically produced O₂, compared to impacts due to initially dissolved O₂. Model sensitivity analysis has shown that at higher pHs (pH >10) transient species such as O₂⁻ and O₃⁻ play a major role in determining the steady-state concentration of molecular products H₂ and H₂O₂. Further validation of the water radiolysis model, particularly at higher pHs, is also discussed.     

209Bi NQR in Mixed Oxides 2Bi2O3· B2O3, 3Bi2O3· 5B2O3, and Bi2O3· 3B2O3

It was earlier found from nuclear quadrupole resonance (NQR) measurements and computer modeling that -Bi₂O₃, Bi₃O₄Br and mixed oxides Bi₂O₃· 2Al₂O₃, Bi₂O₃· 2Ga₂O₃, Bi₂O₃· 3GeO₂, and 2Bi₂O₃· 3GeO₂exhibit local ordered magnetic fields from 30 to 200 G. It thus follows that these compounds are not diamagnets in a conventional sence of the word. With the aim of revealing previously unknown magnetic properties in bismuth(III) oxide-based Main Group element compounds, the mixed bismuth–boron oxides 2Bi₂O₃· B₂O₃, 3Bi₂O₃· 5B₂O₃, and Bi₂O₃· 3B₂O₃were prepared and studied using ²⁰⁹Bi NQR. The quadrupole interactions of the ²⁰⁹Bi nuclei and their electronic environment were studied, the crystallochemical features of the compounds were discussed, and the conformity of the ²⁰⁹Bi results to the X-ray structure data was verified. The preliminary tests in the field of a permanent magnet showed that the resonance intensities increase in external magnetic fields, indicating that a magnetism of unknown nature develops in the titled compounds. It was found reasonable to continue studies of the magnetic properties of these compounds using single-crystal ²⁰⁹Bi NQR in external magnetic fields.     

Structures and bonding of B4O5 and B4O5− clusters: Emergence of boroxol ring and competition between rhombic B2O2 and hexagonal B3O3 cores

Boron oxide clusters are electron-deficient species with novel structures and bonding, in which the emergence of rhombic and boroxol rings is of interest. We report on computational prediction of the global-minimum structures for two boron oxide clusters: B₄O₅ and B₄O₅⁻. These structures differ distinctly, as established through global machine searches and electronic structure calculations at B3LYP and single-point CCSD(T) levels. While B₄O₅ neutral cluster has a rhombic B₂O₂ core, the B₄O₅⁻ anion features a boroxol B₃O₃ ring. One electron completely changes the potential landscapes. Bonding analyses show that the 4π electron-counting is crucial for a rhombic B O cluster, in contrast to π sextet for a boroxol ring, which underlies the competition between rhombic and boroxol rings in B₄O₅/B₄O₅⁻ clusters. A possible pathway for rhombic-to-hexagonal transformation is proposed based on intrinsic reaction coordinate calculations. Anion B₄O₅⁻ cluster, a new member of the inorganic benzene family, is among the smallest B O species with a free-standing boroxol ring, governed collectively by composition and electron-counting.     

Synthesis and structures of Pb3O2(CH3COO)2·0.5H2O and Pb2O(HCOO)2: two corrosion products revisited

Reactions of carboxylic acids with lead play an important role in the atmospheric corrosion of lead and lead-tin alloys. This is of particular concern for the preservation of lead-based cultural objects, including historic lead-tin alloy organ pipes. Two initial corrosion products, Pb(3)O(2)(CH(3)COO)(2)·0.5H(2)O (1) and Pb(2)O(HCOO)(2) (2), had been identified through powder diffraction fingerprints in the Powder Diffraction File, but their structures had never been determined. We have crystallized both compounds using hydrothermal solution conditions, and structures were determined using laboratory and synchrotron single-crystal X-ray diffraction data. Compound 1 crystallizes in P1, and 2 in Cccm. These compounds may be viewed as inorganic-organic networks containing single and double chains of edge-sharing Pb(4)O tetrahedra and have structural similarities to inorganic basic lead compounds. Bond valence sum analysis has been applied to the hemidirected lead coordination environments in each compound. Atmospheric exposure experiments contribute to understanding of the potential for conversion of these short-term corrosion products to hydrocerussite, Pb(3)(CO(3))(2)(OH)(2), previously identified as a long-term corrosion product on lead-rich objects. Each compound was also characterized by elemental analysis, thermogravimetric analysis and differential scanning calorimetry (TGA-DSC), and Raman spectroscopy.     

Synthesis, Characterization and Thermochemistry of 2MgO：B2O3：1.5H2O

Introduction　　 2MgO·B2 O3(Mg2 B2 O5)and 2MgO·B2 O3·H2 Omightbepreparedaswhiskermaterials .12MgO·B2 O3·H2 OnamedszaibelyiteisamagnesiumboratemineralwithastructuralformulaofMg2 [B2 O4 (OH) 2 ].2 Itisdifficulttosynthesizethiscompoundinthelaboratory .Recently ,weobtainedasimilarcompound 2MgO·B2 O3·1 5H2 Owhenwetriedtopreparewhiskerof 2MgO·B2 O3·H2 Obythephasetransformationof 2MgO·2B2 O3·MgCl2 ·14H2 OinH3BO3solutionunderhydrothermalcondition .Itishope fultopreparewh…     

Thermal Dehydration and Infrared Studies of Mg 2 P 2 O 7 · 6H 2 O Diphosphate

The thermal dehydration of Mg 2 P 2 O 7 ·; 6H 2 O were studied, in the range 25-800°;C, by thermogravimetric analysis (TG-DSC), x-ray diffraction, and infrared spectroscopy. According to the TG-DSC curves, the dehydration of this salt takes place in two stages. The results of thermal analysis, x-ray patterns, and infrared spectra of this compound heated at different temperatures showed that, after dehydration, Mg 2 P 2 O 7 ·; 6H 2 O decomposes into dihydrate Mg 2 P 2 O 7 ·; 2H 2 O diphosphate then to an amorphous Mg 2 P 2 O 7 product which crystallises at 665°;C to give anhydrous diphosphate f Mg 2 P 2 O 7 . The j H enthalpy of the dehydration of Mg 2 P 2 O 7 ·; 6H 2 O and of the formation of f Mg 2 P 2 O 7 have been calculated from thermogravimetric data. The infrared spectroscopic study of Mg 2 P 2 O 7 ·; 6H 2 O and of its heated products, reveals the existence of the characteristic bands of the P 2 O 7 group ( x as POP and x s POP) and showed that the POP angle is bent in these salts. In these compounds, the POP angle values are estimated using the Lazarev's relationship.     

Compound and solid-solution formation in the system Li2ONb2O5TiO2

A systematic study of compound and solid-solution formation in the system Li₂ONb₂O₅TiO₂ has been made. Several solid-solution series, based on LiNbO₃, LiNb₃O₈, Li₂Nb₂₈O₇₁, Li₂TiO₃, phase M, Li₂Ti₃O₇, and TiO₂, have been characterized. In all cases, the principal solid-solution mechanism appears to involve stoichiometric formulae with constant overall cation content. One new phase, of approximate formula Li₁₃TiNb₅O₂₁, has been prepared. A subsolidus phase diagram for the ternary system is presented.     

Crystal Structure and Properties of Rb4H2I2O10 · 4H2O

Single crystals of the Rb₄H₂I₂O₁₀· 4H₂O were synthesized for the first time and studied by X-ray diffraction analysis. The crystals are monoclinic, a = 7.321(6) Å, b = 12.599(8) Å, c = 8.198(8) Å, = 96.30(7)°, Z = 2, space group P2₁/c. The H₂I₂O₁₀ ^4– anion is formed by the edge-sharing IO₆ octahedra. The anions are united by hydrogen bonds into a chain running along the x axis. The chains are combined by water molecules into a three-dimensional structure through hydrogen bonds. The compound is a proton conductor. The conductivity values measured at 20–60°C vary within 10^–6 to 10^–4 ohm^–1 cm^–1.     

Rapid synthesis and consolidation of nanostructured 2MgAl2O4–MgAl2Ti3O10 composite and its mechanical properties

Rapid sintering of nanostructured 2MgAl₂O₄–MgAl₂Ti₃O₁₀ composite in a pulsed current activated sintering process was investigated. The advantage of this process is that it enables very rapid densification to near theoretical density and prevents grain growth in nanostructured materials. Highly dense nanostructured 2MgAl₂O₄–MgAl₂Ti₃O₁₀ composite was produced by simultaneous application of 80 MPa pressure and a pulsed current of 2,800 A for 2 min. The sintering behavior, grain size, and mechanical properties of the 2MgAl₂O₄–MgAl₂Ti₃O₁₀ composite were investigated.     

Syntheses and structures of p-HOOCC6F4COOH · H2O (H2L · H2O) and luminescent coordination polymers [Tb2(H2O)4(L)3 · 2H2O] n and Tb2(Phen)2(L)3 · 2H2O

Compounds p-HOOCC₆F₄COOH · H₂O (H₂L · H₂O), [Tb₂(H₂O)₄(L)₃ · 2H₂O] _n (I), and Tb₂(Phen)₂(L)₃ · 2H₂O (II) are synthesized. According to the X-ray structure analysis data, the crystal structure of H₂L · H₂O is built of centrosymmetric molecules H₂L and molecules of water of crystallization. The crystal structure of compound I is built of layers of coordination 2D polymer [Tb₂(H₂O)₄(L)₃] _n and molecules of water of crystallization. The ligands are the L^2? anions performing both the tetradentate bridging and pentadentate bridging-chelating functions. The coordination polyhedron TbO₉ is a distorted three-capped trigonal prism. Acid H₂L manifests photoluminescence in the UV region (??_max = 368 nm). Compounds I and II have the green luminescence characteristic of the Tb³⁺ ions, and the band with ??_max = 545 nm (transition ⁵ D ₄?? ⁷ F ₅) is maximum in intensity. The photoluminescence intensity of compound II is higher than that for compound I.     

Phase diagram and IR spectral investigations of the 2TeO2 · V2O5Li2O · V2O5 · 2TeO2 system

By means of X-ray phase analysis, IR spectroscopy, and DTA, the system 2TeO₂ · V₂O₅Li₂O · V₂O₅ · 2TeO₂ was investigated and its phase diagram was constructed. The formation of a new compound with composition Li₂O · 3V₂O₅ · 6TeO₂, melting incongruently was documented. A comparison of the bands in the IR spectrum was made. Stable glasses in the whole range of concentrations were prepared. From the IR spectra of the glasses, the corresponding crystallization products, and the data of known crystal structures, a model of the short-range order in the glasses was proposed.     

Infrared,Raman and XPS spectroscopic studies of Bi2O3–B2O3–Ga2O3 glasses

Glasses with compositions 60Bi₂O₃–(40?x)B₂O₃–xGa₂O₃ (x = 5, 10, 15, 20 mol%) are prepared by conventional melting method. The thermal properties are investigated by differential thermal analysis (DTA) and the structures of the glasses were probed by Infrared, Raman and X-ray photoelectron spectroscopy (XPS). The results show that density, refractive index and optical basicity increase with the increase of Ga₂O₃. The glass transition temperature (T_g), the onset crystallization temperature (T_x), ΔT (T_x?T_g) decrease with the content of Ga₂O₃. The cut-off edges in ultraviolet and infrared shift to longer wavelength with the increase of Ga₂O₃. On the other hand, the addition of Ga₂O₃ causes a progressive coordination number change of the boron atom from 3 to 4. XPS result indicates both Bi⁵⁺ and Bi³⁺ exist in 5 mol% Ga₂O₃ content, while Bi⁵⁺ amounts decrease with the increase of Ga₂O₃ contents. The glass is mainly composed of [BiO₆], [BO₃], [BO₄] and [GaO₄] polyhedra. Glasses are supposed to have layer structure. [BO₃] triangle and [BO₄] tetrahedra may be located between the [GaO₄] tetrahedral and [BiO₆] octahedra to prevent crystallization and to compensate electric charge.     

Thermodynamic modeling and experimental verification for ion-exchange synthesis of K2O·6TiO2 and TiO2 fibers from K2O·4TiO2

A thermodynamic model was established to determine ion-exchange conditions for the synthesis of potassium hexatitanate (K₂O·6TiO₂) and titanium dioxide (TiO₂) from potassium tetratitanate (K₂O·4TiO₂) fiber. In the proposed model equilibrium species in the solid phase and corresponding ion-exchange equilibrium constants at 298.15 K were determined from the experimental data of Sasaki et al. [Inorg. Chem. 24 (1985) 2265]. In order to verify the proposed model, prediction results were compared with experimental data determined in literature and those measured in this work. The comparison shows a good agreement. Based on this, the proposed model was also used to predict more extensive suitable conditions for the synthesis of K₂O·6TiO₂ and TiO₂.     

Synthesis and crystal structure of Cs2[(UO2)2(C2O4)3] and Cs2[UO2(C3H2O4)2] · H2O

Cs₂[(UO₂)₂(C₂O₄)₃] (I) and Cs₂[UO₂(C₃H₂O₄)₂] · H₂O (II) have been synthesized and studied by X-ray diffraction. The crystals of complexes I and II are monoclinic: a = 8.1453(2) Å, b = 8.9831(2) Å, c = 11.3897(4) Å, β = 104.0950(10)°, V = 808.29(4) ų, space group P2₁/n, Z = 2, and R ₁ = 0.0255 for I and a = 9.6998(2) Å, b = 17.8686(3) Å, c = 8.2074(2) Å, β = 97.5780(10)°, V = 1410.10(5) ų, space group P2₁/c, Z = 4, and R ₁ = 0.0287 for II. The uranium-containing structural units of complexes I and II are [(UO₂)₂(C₂O₄)₃]^2? chains and [UO₂(C₃H₂O₄)₂] ₂ ^4? dimers, which belong to the AK _0.5 ⁰² T¹¹ and AT¹¹B⁰¹ crystallochemical groups (A = UO ₂ ²⁺ , K⁰² and T¹¹ = C₂O ₄ ^2? , T¹¹ and B⁰¹ = C₃H₂O ₄ ^2? ) of uranyl complexes.     

Methane Decomposition over Ni/α-Al2O3 Promoted by La2O3 and CeO2

The decomposition of methane on Ni/a-Al2O3 modified by La2O3 and CeO2 with differ-ent contents has been investigated and the ralationship between methane decomposition and removal of carbon by CO2 over these catalyst has also been studied by pulse-chromatography. The catalysts were characterized by TPR and XRD. It was shown that Ni/a-Al2O3 could be promoted by adding La2O3, and the carbon species produced over this catalyst was activated and eliminated by CO2. But CeO2 would suppress the decomposition of methane over Ni crystallite. Both La2O3 and CeO2 can inhibit aggregation of the Ni particles. Decomposition of methane over the Ni-based catalysts is structure sensitive to a certain extent.     

Preparation and characterization of SO4 2−/Fe2O3–TiO2–Nd2O3 catalyst

This paper reports on the preparation of SO₄ ^2?/Fe₂O₃–TiO₂–Nd₂O₃ (SFTN) by combustion method. The effect of Nd content on catalytic activity was investigated. The prepared materials doped and undoped by Nd were compared by means of TG-DTG, XRD, FT-IR, NH₃-TPD and TEM techniques. Results indicated that the introduction of Nd improved the catalytic activities of the catalysts. Catalytic activity of SFTN was the highest with 98.3 % menthol conversion when Nd content was at 2 wt%. The introduction of Nd stabilized the coordination bond between the sulfate irons and the metallic oxides, helping in the formation of solid acid sites, enhancing the dispersion of catalyst particles, and inhibiting the growth of catalyst particles under heating.     

New N2O2‐ and N2O3‐Macrocycle Ligands Incorporating p‐Xylyl Groups

Abstract

The synthesis and characterization of four dibenzo‐substituted macrocycles incorporating mixed nitrogen and oxygen heteroatoms as well as one or two xylyl groups are reported. The X‐ray structure of one product containing two xylyl functions is presented.     

Fourier transform infrared studies of 5′-GMP in 2H2O and H2O solutions.

In a previous work (ref. 1) we observed important changes in the 1700–1400 cm⁻¹ region of FTIR spectra in ²H₂O solutions when 5′-GMP concentration increases. These changes can be attributed to the self-association of this mononucleotide. Recently, study of this process has been extended to other regions of the spectrum and to H₂O solution. Fourier deconvolution has been employed in order to resolve the broad band into component bands. Differences have been observed between spectra in H₂O and ²H₂O for the same solute concentration. The possible causes of these differences are indicated.